zytel

Fallkniven U2 Review

They say less is more. That is, until, less becomes less. That is the question with the [U2, an ultra minimalist blade from Fallkniven. The U2 is about as simple of a knife as you could ask for. A slim, refined folding lockback with plain black handles, a gleaming laminated blade, and just enough hardware to hold it all together.

Buy the Fallkniven U2 at BladeHQ

Buy on Amazon

I’m no stranger to Fallkniven’s minimalist approach. I have found it works wonderfully in the context of a fixed blade and I have enjoyed their A1 and F1 tremendously. So the time has finally come to examine this little U2, which is arguably the brand’s most popular folding knife, and is marketed as the first folding knife with a Super Gold Powder Steel (SGPS) blade.

General Dimensions and Blade Details

The U2 has an overall length of 5.9″, a 2.52″ blade, weighs 1.5 ounces, and is made in Japan. This knife is made for Fallkniven by Moki. There really is not much to this knife. Oddly enough, when the U2 first arrived I was most surprised with how small the box was. It was not much more than a matchbox. Needless to say, but the U2 is extremely lightweight and eminently pocketable.

The blade of the U2 is a simple drop point with full flat grind. There is no swedge or distinguishing feature, save for the ambidextrous nail nicks, laser etched Fallkniven logo, and demarcation between the steels of this laminated blade. This is about as simple as it gets. The tip is capable enough for household chores and there is a slight belly to the blade.

Fallkniven selected a laminated blade with VG10 cladding, and a Super Gold Powder Steel (SGPS) core. I discussed this steel a little in my review of the F1, but this is my first experience with it. On paper SGPS is a very interesting steel. It is heat treated to 62 HRc, and is sold at a serious premium on the F1 series.

In practice my initial reaction to the cutting ability of the U2 was underwhelming. This is a thin and sharp blade out of the box. I expected laser like performance on cardboard, but my knife was hanging up on something when I tried to cut with it. Don’t get me wrong, it cut, but it wasn’t the silky smooth performance I was expecting from a knife like this. In performing a little research for the review I realized that I was not alone, and the knife benefited greatly from a re-profiling.

I’m no expert at re-profiling, but I first attempted to “relieve the edge” a little with the 30 degree feature of my Sharpmaker. That didn’t give me the result I was after, and I ended up running it on the diamond stones of DMT Aligner. Now the U2 responds a lot better to cardboard, paper, and other fine slicing tasks. The blade stock is very thin, and so is the grind, but for whatever reason I needed to spend some time tweaking the edge before I could realize the knife’s full potential.

I found edge retention to be merely “OK”. I’d say it was a step up over VG10 and AUS8, but not leaps and bounds ahead. When it came time to touch up the edge on the rods of my Sharpmaker, it came back without a ton of work. I would place this steel above VG10, but I would not put it on the same level as ZDP-189 (at least in terms of edge retention). I had zero issues with corrosion resistance.

Handle, Ergonomics, and Carry

The handle of the U2 is injection molded Zytel, a high density plastic resin. It is lightweight, strong, and functional. However, fans of more substantial knives (including those that dislike the “plasticy” feel of the handles on the Griptilian) will likely not be a fan of the U2’s handle. Personally, I don’t mind the plastic feel of the handles. I have owned a number of zytel handled knives in the past, and have never had a problem.

However, this is one aspect of the knife that is tough for me to describe, and I don’t think pictures do a great job conveying the feel of the handle either. I will say the handle is nicely finished. The edges (save the inside edges) are nicely chamfered. There is as generous lanyard hole, and the pivot screw and single rivet give the knife a clean appearance.

The handle of the U2 is just big enough for me to get a full 4 finger grip on. Any smaller and this would become a 3-finger knife. I take an XL glove, so this handle should work for most people. There is no jimping to speak of on this knife. Not a bad thing if you ask me. The inside edges of the handle are a little sharp, but I otherwise found the U2 to be comfortable. The handle itself has a light texture to it. This isn’t a high traction handle, but it’s fine for normal tasks.

The U2 doesn’t have a pocket clip. The nice thing about the plastic handle, is that I have absolutely no reservations in dropping this knife into my pocket with my keys, loose change, etc. It wears well and I have zero concerns of marring the finish. At 1.5 ounces it is like carrying an Alox Cadet. You don’t notice the knife until you need it.

Deployment and Lockup

The U2 is equipped with dual nail nicks. These are generous nicks and they make it easy to open the knife. It is possible to open the knife one handed with a little finger gymnastics, but this was designed to be a 2 hand opener. At any rate, I have no issue with the nail nicks, but I did have an issue with the gritty and noisy pivot. I thought that was strange. I couldn’t see if there were washers inside the handle, so I ended up disassembling the knife and found that there were no washers. It’s metal on plastic.

I don’t need each knife in my drawer to be “Sebenza Smooth” but even my $20 Swiss army knife is smoother than the U2. For me that is a bummer and is one of my least favorite aspects of the knife. Bronze or even teflon washers would be welcome here like WD-40 on the hinge of a squeaky door.

For lockup we have a tried and true lockback mechanism here. The lock on the U2 is sturdy, although this isn’t a knife that I am going to start prying with. The blade snaps crisply in place, is free of play, and disengages with a press of the thumb. The lockback is perfectly fine for this kind of knife. I will say that the tang of the blade and the backspring of the lock do not have a particularly good transition. There is a noticeable “jump” between the 2 pieces of metal. Not a big deal for a user knife, but this is something I usually notice on a slip joint or lockback folder.

My blade is just a touch off center. Nothing rubs.

Fallkniven U2 Review – Final Thoughts

Frankly I am a little torn with the U2. Having had good results with Fallkniven’s fixed blade knives I was excited about finally acquiring the U2. It has generally received good feedback from Amazon and several other reviewers I respect, and I have been enjoying traditional knives and gentleman’s folders. So I thought I would really take to this one.

While I appreciate the practicality of it, I was disappointed by some aspects of the finish work of the knife. The edge required a good amount of tweaking to cut the way I wanted it to, I wasn’t blown away by the Super Gold Powder Steel, and the pivot and action of the knife is gritty thanks to the washer-less design.

On the plus side, it’s lightweight, pocketable, and cuts well once you get it profiled correctly. I think that it can be good as an urban carry or back up piece. So it really depends on what you care about. If you trend towards being anal retentive, then there are quirks with the U2 that may make it a deal breaker. If you are looking for an ultra-light, no-frills, EDC knife without a pocket clip, then it could be the perfect tool.

For my money, I would recommend either the Spyderco Dragonfly, Pingo or the Victorinox Cadet before the U2. I honestly like them more than this knife, and they are all significantly less expensive.

3D Peep Sight Fallkniven U2 Gemini Folding Knife

Closed length: 3.85 inches
Blade length: 2.52 inches
Blade material: lam.Sgps
Blade edge: plain
Point: drop point

With that said, if you are in the market to buy a U2, I recommend purchasing it at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Ka-Bar Becker BK-2 Review

by Dan Jackson 22 Comments

Last Updated: July 20, 2019

Down here in Florida we don’t get a lot of seasonality. For example, I wore shorts and flip flops on Christmas. But when the air starts to turn cool I get a hankering for 2 things: cigars and fixed blade knives. I am pleased to say I have been able to indulge in both this fall, and am ready to provide a review on a quintessential camp knife: the Becker BK-2.

Buy the Ka-Bar BK-2 at BladeHQ

Buy on Amazon

Built in the USA by Ka-Bar, and designed by Renaissance man Ethan Becker, the BK-2 has been widely accepted as a go to survival / camp knife for years now. I can’t tell you why I haven’t reviewed this classic fixed blade yet. There are many knives out there I’d love to review (one day I’ll even get to the classic USMC Ka-Bar) but just haven’t found the time for. Well, scratch the BK-2 off the list. This one has been tried and tested and I’m pleased to share some thoughts with you today.

General Dimensions and Blade Details

The BK-2 has an overall length of 10-5/8″, a 5-1/4″ blade, and weighs 16 ounces. The BK-2 is a chunky knife. Pictures really don’t do it justice, as the proportions may suggest a smaller knife. I was pleasantly surprised by this, although if I were planning an ultra lightweight backpacking trek along the Appalachian trail I’d be less pleased. This strikes me as a tool for a camp site, truck, or your back yard – not something you will want to schlep for miles and miles on end.

Here is a size comparison with the ESEE-3:

The blade is a .25″ (6.35mm) thick slab of 1095 high carbon steel. For whatever reason when I ordered this knife I thought it might be interesting to compare it with my ESEE-3. It turned out to be a poor comparison, because next to my ESEE-3 the thickness of the blade is almost comical. The ESEE-3 might as well be made of aluminum foil when compared with the BK-2. Anyhow, the blade of the BK-2 is a classic drop point shape with a high flat grind and a sturdy tip. The knife has also been powdercoated. The powdercoating is heavily textured like on my ESEE blades. The coating will provide some rolling resistance when trying to cut deeply into things – at least until it gets smoothed down with use.

The BK-2 is interesting in that it can accomplish a lot of different tasks within its relatively small footprint. It’s good for batoning / splitting wood. I used it with great success to prepare a stack of wood for a couple bon fires. I was able to split logs with up to a 4″ diameter easily. You can do some carving with the knife, and I used the BK-2 to whittle up some shavings / tinder to start the fire, and to carve a few stakes for cooking.

Although it’s a little thick and clumsy in my hands for serious carving, I was able to get the job done. The BK-2 is also a decent chopper considering its size. This is a shorter knife, so naturally it won’t chop like an axe or a big fixed blade like the Junglas, but if you need to do limited chopping it will get the job done. Case in point, I needed to chunk up some large frozen sardines for a fish trap I was using – the BK-2 blew through those suckers. For these reasons the BK-2 is a natural choice for camp chores: building fires, prepping food, and odd jobs around a camp site where a sharp object might come in handy.

The only downside is that the BK-2 doesn’t particularly excel at anything. If you need a dedicated chopper, or an ultra fine carving knife, then you will want to look elsewhere. If you want a tough “do it all” knife, then the BK-2 could be a good choice.

As previously mentioned, the BK-2 comes in 1095 high carbon steel. I have wrote about this steel at length, especially over the course of reviewing an number of ESEE knives. 1095 is inexpensive and hearty. It’s easy to sharpen and holds a nice edge, especially when working with wood. It’s tough, but if you do chip it, you will be able to salvage the edge. 1095 is a good working steel, and I think it’s a great choice for this knife.

Handle and Ergonomics

The BK-2 features a spacious zytel (high density plastic) handle over it’s full steel tang. This is a very basic handle design, and it’s perfect for a workhorse knife like this. Ethan Becker apparently spent a lot of time getting this handle shape right, which is why you find it on his whole series of knives. The handle material is humble (although you can easily pick up a pair of micarta scales), but it’s lightweight, and very tough. The finish work on the handle is great. There are no sharp edges, and all of the hardware is sunk deeply into the handle. Rounding things out are an oversize lanyard hole and a generous exposed pommel that can be used for hammering / crushing things. This is a very clean and highly functional handle design. It has also been well executed.

From an ergonomic standpoint the handle of the BK2 feels as straightforward as it looks. This is a thick handle with a generous palm swell. There is plenty of room for larger hands and the absence of jimping / aggressive texture allows you to work with this tool for extended periods of time without blistering your thumb. Those wanting a little more grip could upgrade to micarta scales, or wrap the handle with athletic tape or a “ranger band” (a section of bicycle inner tube). I did not notice any hot spots while using this knife. This is a fantastic handle shape.

Sheath

The BK-2 comes complete with a plastic and nylon sheath. The sheath is simple, lightweight, and sturdy. It has excellent retention, yielding a very satisfying snapping sound when you shove the knife in place. There is no blade rattle at all, and I am not the least bit concerned about the blade ever falling out from the sheath. There is also a drain hole.

The nylon belt loop is simple and features a snap fastener for extra retention. It is fully removable with a Phillips head driver, and the plastic sheath is riveted together. The rivet holes and slots leave you with plenty of options for molle locks, tek-loks, paracord, and webbing. This is an outstanding sheath and it compliments the knife perfectly. Also, the snap fastener lies flat, so I have yet to cut into it when drawing the knife. The only creature comfort missing is that you need to take your belt off to feed it through the belt loop. I like being able to remove a belt sheath without having to take my belt off, but it’s not a deal breaker.

Becker BK-2 Review – Final Thoughts

The BK-2 is an impressive knife, especially when you consider that they are selling for right around $65.00. This is a lot of high quality tool for the money. The simplicity of the design, the quality of materials, and the extremely high level of fit and finish all make the BK-2 punch above its weight. Plus, it works. The stout geometry of the blade is excellent for processing wood, the handle is about as comfortable as they come, and the sheath is lightweight and functional. Finally, the knife itself is made in the USA (the sheath is made in Taiwan). I happen to like a USA made product, although it certainly isn’t a requirement for a favorable review.

All told, it is easy for me to see why the Ka-Bar Becker BK-2 has earned such a following and reputation. It’s simple and it works. If you are looking for an indestructible camp knife or a compact (but very stout) survival knife, then I highly recommend the BK-2.

Sale

KA-BAR Becker BK2 Campanion Fixed Blade Knife, Carbon Steel

Full tang heavy duty field knife suited for camping chores.
Made in Olean New York, U.S.A
Designed by Ethan Becker
Manufactured by KA-BAR Knives Inc.
Comes with a hard shell black nylon sheath.

I recommend purchasing the BK-2 at Amazon.com or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Cold Steel Ti-Lite Review

by Dan Jackson 18 Comments

Last Updated: July 28, 2019
The Cold Steel Ti-Lite is a knife that I received in a trade. As a collector I find myself often buying and selling knives, and I routinely get it hit up with trade propositions. I must confess, the decision to acquire a Ti-Lite was really a product of impulsiveness rather than a well researched and rationalized decision. All I knew was the general shape of the knife and that it was a fairly popular offering from Cold Steel.

Buy the Cold Steel Ti-Lite at BladeHQ

No products found.

A few days later the Ti-Lite was in my hands. Again, it’s confession time. The styling of this particular knife was not my cup of tea, and I was turned off by how unfriendly the design was to left handed people like myself. So I stuck the Ti-Lite on a shelf and would revisit it occasionally. It was a great knife for when I needed a little distraction. I’d practice waving it off my pocket and imitating some of the “sweet moves” you often find in Cold Steel’s promotional videos.

So when I first got it I really wasn’t interested in reviewing the knife, but the Ti-Lite has slowly grown on me. It still isn’t a part of my EDC rotation, I don’t think it’s a practical utility knife, and it really isn’t lefty friendly, but the Ti-Lite is a well made purpose-built tactical knife, and I’d still like to spend some time and talk about it.

General Dimensions and Blade Details

The Ti-Lite comes in 2 blade sizes, the 4″ version shown here and a much larger 6″ version. I happen to have the 4″ version which sports an overall length of 8-3/4″ and weighs 3.6 ounces. This is a long and slim design, and I immediately likened it to a Spyderco Endura. However, a big difference between the Ti-Lite and Endura is that the Endura is a much more versatile design, and can excel at both utility and “tactical” (defensive/offensive) tasks. In my mind the Ti-Lite is much less versatile and really is best suited for stabbing stuff. As we will learn, this Ti-Lite does that job quite well.

The blade on the Ti-Lite is a spearpoint design. The knife is hollow ground, and grind line pretty much goes down the center of the blade and reinforces the very sharp tip. On the spine of the knife you have a long aggressive swedge, and the edge has been neatly applied. There is just a very slight amount of belly here – like I said earlier, I don’t think this would make a particularly good utility knife. A nice satin finish rounds things out. All in all the blade is very well done, and resembles a folding railroad spike.

The blade is made from a 3mm thick AUS 8A stainless steel. This is a mid range Japanese stainless steel known for it’s ability to be easily sharpened and take a great edge. It’s common on Cold Steel’s current offerings and I generally don’t mind it, even if it won’t hold an edge as well as higher end steels. Really you aren’t going to do much actual cutting with this thing, mainly you need something tough – AUS8 is tough and reasonably inexpensive. Given the price, the intended use, and the way you would primarily use this knife I think AUS8 was a good choice here.

Handle, Ergonomics and Pocket Clip

My Ti-Lite came with Zytel (reinforced plastic) handle scales over full stainless steel liners. A full Zytel backspacer rounds out the design. There is also a more expensive [easyazon-link asin=”B001DZNST6″]aluminum version[/easyazon-link] that weighs about an ounce more. I really don’t see any advantage to the aluminum version, but I know some people simply aren’t fans of reinforced plastic handles. The Zytel on my knife is nicely finished, and the stainless steel liners have been given a little polish. Everything is well lined up and fits flush together. I like the screw type construction and how light and sturdy the handle feels. All in all this is a well made handle.

Like the blade shape, the ergonomics of the Ti-Lite are fairly one-note. 2 sharp quillions dominate both the aesthetic considerations and ergonomic qualities of the knife. These quillions are great for deploying the blade (more on that later) but make actually handing the knife somewhat awkward in most normal positions. The quillion on the top of the knife is right where the thumb ramp would normally be, and is rather sharp and uncomfortable. Really the knife is best held in either a reverse grip or a ice pick style grip, although you could straddle the quillion and rest your thumb on the spine of the blade. In the more stabbing oriented grips, the handle really fills the hand and I found the knife to be plenty comfortable. Regular forward grips for utility work are much more awkward.

The pocket clip is a sturdy piece of steel that has been given a bright satin finish. On a knife like this I’d really prefer a blackened clip, but it does match the rest of the stainless steel hardware quite well. A bigger gripe might be that the clip allows for right side tip up carry only. But the good thing here is that the clip is sturdy and offers nice retention. Also, the knife rides rather high in the pocket, not really a big deal in my opinion because of the way the knife deploys.

Deployment and Lockup

With the Cold Steel Ti-Lite you have several options for deployment. My favorite by far is using the quillion to “wave” this knife off the right pocket. Of course what I’m referring to is the wave feature found on many Emerson knives that opens the knife as you draw it from your pocket by catching a protrusion on the blade on the corner of your pocket. This action it snaps open the blade almost instantly, and is easily the fastest way to deploy the knife.

Traditionalists may prefer using the included thumbstud. Southpaws beware, this knife only has a right side thumb stud, and it’s not reversible in the slightest. For that reason, you may prefer to use the quillions to open the knife. If this part of the review was kind of confusing, I suggest checking out my video review – I think I do a slightly better job of explaining the various deployment methods there.

Regardless of the method you choose to deploy your Ti-Light deployment will be very smooth thanks to some teflon washers. Typically I am not a huge fan of teflon washers, but they are well implemented here and I honestly didn’t even realize they were teflon until I closely examined the knife before review (after months of ownership). Blade centering is dead on as well, so I’ve got no complaints.

The Ti-Lite makes use of a large liner lock to secure the blade open. My liner lock engages about 3/4 of the way, and is extremely sturdy. I did not experience any blade play at all, even after waving the knife open hundreds of times. It is a strong lock.

Cold Steel Ti-Lite Review – Final Thoughts

If you are looking for a dedicated defensive knife and are a fan of the retro styling, then I can recommend the Cold Steel Ti-Lite. It’s well made, features good materials, and at around $40 new you aren’t going to break the bank. I will say that this is definitely a specialized knife. It is really only good for stabbing stuff in my opinion, and leaves much to be desired as an EDC or utility knife. Also, the knife is really not lefty friendly – if you are left handed I’d just leave this one alone.

But what the Ti-Lite does, it does really well. It’s a very strong stabbing implement. So ultimately the decision rests on the desires of the consumer. Is this a must have knife? Not in my opinion, but for what it is the Ti-Lite is a nicely done knife.

No products found.

I recommend purchasing the Cold Steel Ti-Lite at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.