Ken Onion

CRKT Ripple Review

Last Updated: August 4, 2019
The CKRT Ripple is a design that had me doing a double take. The flowing lines and sharp looks were very “Ken Onion-y” and upon closer inspection the knife was in fact designed by Ken Onion. It turns out Mr. Onion has parted ways with the folks at Kershaw and he has been picked up by competitor CRKT.

Buy the CRKT Ripple at BladeHQ

Buy on Amazon

The Ripple was one of Ken’s first designs for CRKT. It’s something of a gentleman’s EDC knife, with Ken’s signature flowing curves in a low profile package.

General Dimensions and Blade Details

The Ripple comes in a few sizes. What you see here is the large version with a 3 1/8″ blade, an overall length of 7 1/2″ and a weight of 2.9 ounces. This is a nice size for an EDC knife. Not only is the Ripple lightweight at under 3 ounces, but it’s thin too. The whole knife is less than 5/16″ thick. Plenty of blade in a lightweight package. It’s a slim design that begs to be carried.

The blade is an attractive drop point design. There is an absence of the typical organic curves that Ken Onion is known for, but it still has his style and I find myself wanting for nothing. This is a really slender and refined blade and it comes with an exquisite tip. The swedge running 3/4 of the top of the blade is another elegant touch and the high hollow grind makes this a nice slicer as well. Personally, I love this blade shape.

CRKT has released this knife in several different steels over the years, but 8Cr14MoV is going to be the most common configuration. 8Cr14MoV has been discussed at length before, but this is a Chinese steel that is best known for being expensive, easy to sharpen, and holding an adequate edge. It’s on par with AUS-8, but below VG-10 and 154CM in the steel hierarchy. Feel free to check out my knife steel article for more information on different types of steel.

Handle, Ergonomics, and Pocket Clip

The handle of the Ripple is either made of 420J2 stainless steel (the framelock version) or aluminum (the linerlock version – shown here). The handle pieces have first been CNC milled with a ripple pattern. The handle has then been either a blue or black titanium nitride coating and then has been rubbed to reveal the silver look of the steel. It is a very unique look and can be difficult to capture in photographs although darkchild69, our featured photographer, has done an excellent job here. Another design element is the series of 44 small holes milled into the side of the handle. This is more for decoration I think, although it does lighten the handle up slightly. Finally, the handle is bolted together with two pillars. Very simple and as always, very easy to keep clean. This is a very slim handle and all the detail is unlike anything else currently on the market.

This is a thin metal handle so logic would suggest that this won’t be the most comfortable knife. In fact, the ergonomics are surprisingly good. The handle has been rounded and the flipper helps define the choil. Additionally, there is nice jimping on both the thumb ramp and handle. This provides plenty of traction and makes this a very easy knife to use for general tasks.

The clip is another interesting component. It is mounted high for tip down carry. It sits flush with the top of the handle and follows the line of the handle. One gripe is that the pocket clip it is tip-down right hand carry only. With the assisted open and the flipper, I can totally see why CRKT opted for tip down carry, but with 44 holes already in this knife, they really need to drill a couple more and make this clip ambidextrous.

Deployment and Lockup

The Ripple is a non-assisted open knife actuated by a flipper on the back of the handle. Those familiar with Ken Onion’s Leek, Chive, ZT 302, etc will be very familiar with this style of deployment. The flipper has been given some aggressive jimping that really bites into your thumb, you will not be slipping on this flipper. There are no thumb studs.

An interesting feature of the Ripple is the IKBS opening system. IKBS stands for “Ikoma Korth Bearing System” and means just that. There are a total of 16 ball bearings (8 per side of the blade). The bearings are uncaged and sit in little grooves machined into the handle and are used in place of teflon or phosphor bronze washers. Initial impressions are very good – the bearings make for a very fast and smooth deployment. This is one of the smoothest opening knives currently on the market (production blades at least). The IKBS combined with the assisted feature makes for effortless blade presentation. And apparently the bearings do not need much maintenance, which is good because I would not want to take this knife apart.

Here is an update from 2019: Over the past 8+ years I’ve owned countless bearing equipped knives. Generally they have held up real well. The versions with caged bearings are easier to take apart. This IKBS equipped knife includes loose bearings. You can take these knives apart too, but you need to be careful. Here is a great video from CRKT on how to clean an IKBS equipped knife.

The Ripple uses a steel frame lock, which is plenty strong for the kind of EDC tasks this knife was designed. Due to the intricate design on the handle you can hardly tell the framelock is there. I like how this looks and I also like how the framelock and adds to the simplicity of the design. However, I have noticed on multiple knives, the framelock extends very far over (see below) while others lock up early. Frame locks are designed to slowly break in and will travel over with extended use. Having the lock engage “late” from the start means that you may get less life out of the lock. If you get a Ripple with this late lock up, I would recommend talking with CRKT and getting it fixed because in my opinion, this shouldn’t happen with a new knife.

Here is a parting size comparison with my Boker Plus Urban Trapper:

CRKT Ripple Review – Final Thoughts

The Ripple is a beautiful knife. Ken Onion took a sexy blade shape and melded it with a wonderful handle. This knife “flows” from an aesthetic standpoint and I think the design is just phenomenal. The IKBS is both interesting and functional, long term testing will tell if this is a mere novelty or truly a revolutionary way to deploy a blade. The Ripple is made in Taiwan, which we now know (thanks to Spyderco) is capable of making some great higher end blades at a terrific value.

All things considered the CRKT did a great job with the Ripple. I would prefer if they re-worked the pocket clip so that it was ambidextrous, and a little less weird, but beyond that you get a lot of nice knife for the money. The Ripple is one of the knives that laid the foundation for Ken Onion / CRKT collaborations, and continues to be a great lightweight high value option for folks years after its original release.

CRKT Ripple EDC Folding Pocket Knife: Gentleman Everyday Carry, Satin Blade, IKBS Ball Bearing Pivot, Liner Lock, Textured Aluminum Handle, Pocket Clip K415KXP

Fast Opening: IKBS ball bearing pivot deploys the blade fast
Fast Opening: The flipper deploys the blade fast
Strong And Lightweight: Aluminum handle combines strength with minimal weight
Designed by Ken Onion in Kaneohe, Hawaii
Limited Lifetime Warranty covers any defects in materials or workmanship, see company site for details

I recommend buying the CRKT Ripple at Amazon or BladeHQ. Thanks for reading and Stay Sharp.

Kershaw Leek Review

by Dan Jackson 20 Comments

Last Updated: December 1, 2019
The Kershaw Leek is a popular EDC knife designed by legendary custom knife maker Ken Onion. Between his designs for Zero Tolerance Knives, Kershaw, and CRKT, Ken’s work has received a lot of attention on this site. This is for good reason as he is highly regarded as a knife designer.

Buy the Kershaw Leek at BladeHQ

Buy on Amazon

The Kershaw Leek is firmly planted in the Every Day Carry (EDC) category. In fact, this is something of a gold standard for EDC. It comes in a great size and is a durable design, perfect for daily carry. Additionally, the Leek has been offered in wide variety of colors and finishes, including some limited edition versions over the years. This makes the Leek a collectable knife. For these reasons the Leek has become a favorite of both hardcore enthusiasts and casual pocketknife users.

General Dimensions and Blade Details

The Leek has an overall length of 7″, a 3″ blade, weighs 3 about ounces, and is made in America. Like the vegetable it was named after, this is a sleek and slim design. This lightweight folder is aimed directly at the Every Day Carry (EDC) market.

Here is a size comparison with the Leek in between my Kershaw Skyline and Kershaw Chive:

The Kershaw Leek features a modified wharncliffe style blade. The Leek’s mostly flat edge is almost completely devoid of belly. This makes the knife well suited for tasks that involve the tip of the blade. The Leek’s blade comes to a very fine tip and it makes the knife great for piercing tasks and detail work. Stuff like scoring boxes and clipping coupons is a breeze with a wharncliffe. It’s also easy to sharpen a wharncliffe blade like this relative to a knife with a curved edge. Another advantage of the wharncliffe design is that pressure is applied uniformly to the edge. This allows you to place a good amount of leverage into a cut.

On the flip side, folks may not like the wharncliffe blade because it has no “belly” or forward curvature to the blade. Belly is especially useful when preparing food (think, rocking a kitchen knife back and forth) or skinning game without piercing the hide. And that tip, while very precises, is somewhat fragile. You don’t want to drop any knife, or pry with any knife, but the tip of the Leek is especially delicate.

Another argument against the wharncliffe is that it looks funny. It lacks the traditional elegance of something like the Loveless Drop Point Hunter. This wharncliffe blade may take some getting used to if you come from a traditional hunting knife background, but that’s part of what folks find endearing about Ken Onion’s work.

Here is another size comparison with the Spyderco Endura and the Delica 4:

The Leek is a perennial in Kershaw’s catalog. The design is at least 10 years old, and probably is closer to 20. Accordingly, Kershaw has offered the knife in a number of steels over the years. But if you are going to buy one new one today, it will most likely come in 14C28N.

14C28N is developed by Sandvik, a Swedish company that made the steel exclusively for KAI USA/Kershaw Knives. 14C28N is a high quality stainless steel and is a choice for the price. I have found that 14C28N is a practical steel. It takes a fine edge easily, holds that edge for a decent amount of work, and is easy to sharpen. It also has good stain resistance. I prefer it over 8Cr13MoV and Aus8, the Asian budget steels, as it holds an edge longer. I also like it more than D2, a semi-stainless steel that can be found at similar price point as 14C28N, because 14C28N is easier to sharpen and isn’t as prone to staining.

It’s an excellent all round steel, and is appropriate at this price point.

Handle, Ergonomics, and Pocket Clip

The handle of the Leek will come in either full stainless steel with a frame lock (shown here) or aluminum scales with a liner lock. Both models feel good in the hand for a smaller knife. The solid steel handled version has a nice heft to it. Both handle types are constructed with screws rather than pins, so if you need to disassemble the knife, then it can easily done with a T6 torx bit.

Fit and finish on this handle is excellent. All the parts line up. The finish work is good with no tooling marks or anything like that. It’s simple design, but Kershaw has it dialed in.

This is a comfortable little knife that is geared towards light to medium use. I found I was able to get a 4 finger grip on the knife without much issue and my thumb found the thumb ramp easily. There is a little bit of jimping on the thumb ramp. The jimping isn’t supper aggressive, but it does grab the skin a little. Otherwise, there isn’t much of a “traction plan” on this knife, so you won’t want to skin a deer with it or take it into the shower, but for a small knife I liked the ergos.

The pocket clip of the Kershaw Leek is pretty good. Ken Onion is known for designing some pretty “out there” pocket clips, but the clip on the Leek is relatively normal looking. It is long, and offers good spring retention. It is reversible for tip up or tip down carry, but it is not ambidextrous.

The clip rides pretty low if you mount it tip down, but for tip up carry a good half inch of the handle sticks out. That said, this is a small and light knife, it still carries well and is unlikely to draw much attention. Here is a shot of the Leek in the pocket:

Deployment and Lockup

The Leek is an assisted opening knife, which means you start opening it manually, but then a spring kicks in to flip the blade open the rest of the way. Ken Onion designed the assisted opening system, which Kershaw calls the “SpeedSafe” deployment system. This assisted open technology is robust, and is used on a lot of Kershaw and Zero Tolerance knives. The Leek deploys quickly with a slight amount of pressure on the thumb studs or flipper. The knife opens with a satisfying “snap”, even after thousands of flips. Having owned a number of SpeedSafe knives over the years I can vouch for it’s reliability. It’s a good assisted opening mechanism.

There is a second optional safety lock to keep the knife from opening accidentally. Out of the box, this secondary safety is loose, and will invariably move around when you don’t want it to. Thankfully, this safety can be tightened down, or even removed completely if you decide not to use it.

Additionally, for those that don’t care for the SpeedSafe, it’s possible take the spring out and use this as a non-assisted opening knife. There is a ball bearing detent inside on the lockbar, so the knife still functions de-assisted. But primarily the Leek was designed as an assisted opening knife.

The blade on my knife locks open with a stainless steel frame lock. The lock is solid, and without blade play in any direction. It should be more than adequate for the typical EDC chores you will put this knife up to, like breaking down boxes and opening mail. My Leek has seen substantial use over the years, and the lock still engages early, and securely without blade play. When it’s time to release the lock there is no stick.

The Leek was designed to be a “1 hand” knife, which means you can open and close this knife with one hand. I’m left handed and found it easy to both open and close this knife with one hand. For a small EDC knife this is handy, and it’s almost a requirement for my EDC knives.

Here is a parting size comparison with another EDC classic, the Benchmade Mini Griptilian:

Kershaw Leek Review – Final Thoughts

The Kershaw Leek has most of what I look for in a small EDC knife. It’s light, slim, sharp, and fast. I like the solid lockup and quality blade steel. The pocket clip is secure, and the knife feels good in the hand. The fact that this Kershaw is made in the USA certainly does not hurt either. I think the quality is better on Kershaw’s USA made knives than their imported blades.

The biggest potential issues with the Leek are that there is not much texture on the handle, and the tip is thin and can break if you are not careful with the knife. It’s a little “fiddly” and is more of a light duty knife. It will accomplish most typical urban or suburban EDC chores, but if you have harder use in mind I’d look elsewhere. Also, the secondary lock is annoying unless you tighten it down or remove it.

However, for a little EDC blade I think these are minor issues. You just have to keep your intended use in mind. The sleek design makes this something of a gentleman’s folder, and I could see this knife doing just as well in an office as it would in a more demanding environment.

Perhaps the greatest test is the test of time. I originally wrote this review back in 2011. Back then, there were a lot less knife manufacturers and knives to choose from. As I update this review in late 2019, the Leek is still relevant. Kershaw still makes it, and it still sells well. My review sample has held up well over the years. It’s a high quality knife and is designed to last. And at well under $50, the Leek is an affordable USA made option. I’d say it has aged well and passes with flying colors.

Personally, I prefer the Kershaw Skyline over the Leek, but if you like the design then I think you will be pleased with the build quality and practicality of the Leek. Much like the Skyline, this is a modern classic for good reason. Recommended.

Kershaw Leek Pocket Knife, 3" 14C28N Stainless Steel Drop Point Blade, Spring Assisted Knife, Folding EDC

KERSHAW LEEK POCKET KNIFE: The Kershaw Leek might just be your new favorite EDC. Not too big, not too small, the 3-inch blade and slim design make it capable of fulfilling a wide range of cutting tasks. Made in the USA.
DROP POINT PLAIN EDGE BLADE: Made from high-performance Sandvik 14C28N stainless steel, the blade resharpens easily and holds its edge. The bead-blasted finish provides a clean, matte look.
410 STAINLESS STEEL HANDLE: The corrosion-resistant, stainless-steel handle is contoured for a comfortable grip while in use. Silver, bead-blasted finish. Includes reversible pocketclip for right, tip-up/down carry.
DESIGNED WITH SAFETY IN MIND: Equipped with Kershaw’s SpeedSafe assisted opening for easy one-handed release with flipper. Frame lock secures blade open while in use and Tip-lock slider keeps blade locked closed when folded.
SIZE SPECIFICATIONS: Blade Length: 3in. Closed Length: 4in. Overall Length: 7in. Weighing in at 3oz. Backed by Kershaw’s Limited Lifetime Warranty.

I recommend purchasing the Kershaw Leek at Amazon.com or BladeHQ.Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Zero Tolerance 0300 Review

by Dan Jackson 10 Comments

When Zero Tolerance first came on the scene the 0300 is one of their knives that really caught my eye. The graceful curves reminded me of some deep sea mammal while the construction reminded me of a semi truck. So I wasn’t surprised to learn that the 0300 was a collaboration between Ken Onion and the Strider Knife Corporation. Ken Onion is known for making a lot of really nice designs for Kershaw (and now CRKT) and Strider is known for making some of the toughest folders in the world. When you get two powerhouses like this in the same room working on a knife that is made in the USA with the fit and finish Kershaw is known for – well, I start to pay attention.

Before we go forward I need to say that “0300” is used to designate the coloration of the knife. All the knives in the 0300 Zero Tolerance line (which include the 0300, 0301 and 0302) are identical except for the color schemes. Pictured in this review is the black on black 0300. The ZT 0301 has a Forest Green handle and Tiger Striped blade finish and the ZT 0302 has a Coyote Brown handle with a Tiger Striped blade finish. All 3 knives are made in the USA.

General Details and Blade Dimensions

The size and heft of this knife are the first things you notice. The 0300 has the profile of a bulldozer and it is incredibly stout. The total length is 9″, the blade is 3-3/4″ and the weight is a solid 8.6 ounces. This is a heavy knife and the weight may deter some people from wanting to carry it. I’ll admit, it’s not my ideal EDC and this is definitely a knife that you don’t forget that is in your pocket, but I have carried it no problem with a sturdy pair of shorts or jeans. I feel that whether the knife is “too heavy” is up to you, so I’m not going to pass judgment in that regard.

The blade is a modified drop point, marked by Ken Onion’s signature styling. It features a high flat grind, and a partial swedge near the top. What I really like about this knife is the big belly on the blade. This is great for utility tasks. The blade steel is thick (4mm) and it holds the thickness all the way to the tip. This knife wasn’t designed for stabbing, it was designed to hold up to hard use tasks. There is a nice subtle recurve for enhanced slicing power and the Zero Tolerance logo and various other insignia has been laser etched onto the blade.

The steel on the 0300 series is a large piece of S30V. For those unfamiliar with S30V, it is one of the finest knife steels available, and it’s been this way for a number of years now. More expensive steels have arrived on the scene but it’s really tough to match the combination of ease of sharpening, edge retention and corrosion resistance that S30V is known for.

The blade has been further treated with a Tungsten DLC (Diamond Like Carbon) Coating. This is a high quality blade coating that will hold up a lot better than more inexpensive painted coatings. The tiger stripes on the 0301 and 0302 are really killer and quite unique in the production knife world.

Handle, Ergonomics and Pocket Clip

The handle of the 0300 is really well done. As far as construction goes, on one side we have textured G10 over a stainless steel liner. The other side (the lock side) is made of a single piece of titanium. There is a G10 spacer between the two sides and everything has been screwed together. Everything lines up flush, and it’s all been beautifully finished with no rough edges or anything of that nature.

Ergonomics on the 0300 are excellent. The handle has the same wide profile of the blade and it feels very satisfying in the hand. The flipper doubles as a choil and there is a generous amount of jimping on the thumb ramp and pommel. Both sides of the handle are machined with a very aggressive textured pattern. All of these elements combine to provide superior grip and response. I am not worried about my hand slipping forward on the knife at all. It is very comfortable to hold this knife, with zero hot spots. The 0300 is a large knife so I expected good ergonomics, but the designers really went out of their way to cover all of the bases. I am very impressed with the ergonomics of this knife.

The pocket clip of the 0300 is straight out of the Kershaw parts bin. I have an almost identical clip on my Skyline (and a number of other Kershaw knives). That is ok though, because this is a proven clip design, it’s simple, and it totally works. This is a very stiff clip, which works well with the flat and wide profile of the knife; it will hold the knife in place anywhere in your pocket. Heavy knives have a tendancy to sink down to the corners of my pants pockets, which can interfere with some of the other gear I carry (like my flashlight). The stiffness of the 0300’s clip avoids that issue.

Another great thing about the clip is that it is mountable on all 4 corners of the knife. This gives you the freedom to carry your knife the way you want to. I also like how the clip has been blackened. All in all this is a very secure and discreet carry, I am very pleased with how well everything works considering it such a heavy knife.

Deployment and Lock-up

First of all, the 0300 is an assisted opening knife, making use of Kershaw’s SpeedSafe assisted opening technology. With the 0300 you have the option of either deploying the knife with the thumbstuds or flipper. This is really cool because the thumb studs actually work as the stop pin here, and often it’s very difficult to get at the thumbstuds on this type of knife. For me, I had no problem – even left handed, getting at the thumbstuds. Either way you want to deploy the knife, the SpeedSafe quickly engages and moves this big blade out with a good amount of speed. It’s a fun and satisfying knife to open and the SpeedSafe is a proven assisted opening mechanism. Of course, you could always disable this feature if you preferred 100% manual operation.

Deployment is not only fast, but it’s very smooth. The 0300 uses a pair of very large phosphor bronze washers. These low friction washers are very smooth. Also, the pivot pin is very big. It’s actually a large bolt that requires a 3/8″ driver to loosen it. This may be problematic in the field, but everyone owns a 3/8″ driver so for my use it wasn’t an issue. I think it’s a pretty cool look and is appropriate given how overbuilt the rest of the knife is.

The lock on the 0300 is a titanium frame lock. This is a very sturdy style of lock and ZT really put this one together correctly. As you can see, mine engages nice and early, with plenty of room to break in with use. It almost goes without saying, but there is absolutely no blade play in this knife. Despite the strength of the lock, it is still easy to disengage when you want to fold the knife up. A cool detail is that they included a Hinderer lockbar stabilizer (that dark circular portion) on the side of the lock. This handy feature prevents you from overextending the titanium frame lock, which could compromise the integrity of the knife.

Zero Tolerance 0300 vs. Zero Tolerance 0350

A common question a lot people have is whether they want the ZT 0300 or the smaller Zero Tolerance 0350. If you are one of those people, I made a video comparing the two knives.

Zero Tolerance 0300 Review – Final Thoughts

The ZT 0300 is an incredible knife. The build quality is superb, the selection of materials is top notch and the design and features are outstanding. The knife retails for around $230, which is actually an outstanding value when you consider that this knife is very similar in both design and build quality to several Strider knives selling for $400-$500. I don’t think you will be able to find another folding knife as well built and feature rich as the ZT 0300 in the $230 range.

Perhaps the biggest complaint would be the weight. It is not a light knife. However, if you want a large, beautiful, hard use folder with premium materials made in the USA then I can safely recommend the 0300 or any of it’s siblings.

I recommend purchasing the Zero Tolerance 0300 at Amazon.com.

[easyazon-block asin=”B0017SC9H6″ align=”center”]

Kershaw Scallion Review

by Dan Jackson 5 Comments

Last Updated: August 30, 2019
The Kershaw Scallion is another one of those timeless EDC knives that should be considered by collectors and enthusiasts alike. The Scallion is a remarkable little blade that shares some great similarities to the Kershaw Skyline, but is very much it’s own animal. Designed by custom knifemaker Ken Onion, the Scallion is a slim, lightweight knife with very fast blade deployment and superb fit and finish. If you are in the market for a high quality and affordable EDC knife, the Scallion is a blade that you may want to consider.

Buy the Kershaw Scallion at BladeHQ

Buy on Amazon

General Dimensions and Blade Properties

The Scallion has an overall length of 5.57″, a 2.4″ blade, weighs 2.9 ounces and is made in the USA. This is a great size for Every Day Carry (EDC). It’s very unobtrusive in the pocket and it won’t weigh you down – excellent for urban or suburban carry.

The blade is a modified drop point with a hollow grind and a recurve to the edge of the blade. The recurve is good for slicing although it makes the knife more difficult to sharpen. Ken Onion is known for designing curvy (“organic”) looking knives, and the Scallion fights right in to that theme. With that said, I would not recommend a recurved blade to a first time knife buyer. There is a slight swedge that concludes at a capable tip. This blade shape is capable for EDC tasks like breaking down boxes, opening mail, and food preparation. Because the knife is so small, I would not push the Scallion much further than that.

The blade is made of 420HC stainless steel. 420HC is regarded as a low end steel, although if it is heat treated properly, it can perform fine for daily tasks. 420HC has great corrosion resistance although the edge retention is not going to be on par with something like 440C. Kershaw does a good job with their heat treat, however, I would like to see them upgrade the steel on this. If they used a Sandvik 12C28 like they do on the Leek, I think that would be an excellent upgrade.

Handle and Pocket Clip

The Scallion typically comes with an anodized aluminum handle. The aluminum is 6000 series aircraft aluminum and it keeps the knife lightweight and strong. The great part about the Scallion is that there are a variety of different colors and handle configurations to choose from. This knife comes in everything from a standard satin finished blade with a black handle to a rainbow colored version that is very unique looking and everything in between. There have also been a lot of limited edition versions of the knife so if there is a particular color configuration you are looking for, it is probably available commercially or on the secondary market.

The handle is comfortable and ergonomic. There is a short run of jimping on the thumb ramp of the blade, and the finger choil which helps provide good grip. Depending on the handle materials you select, there will be additional traction. This knife is easy to use and feels good in the hand.

The pocket clip is rather large and only allows for right hand tip down carry. I like the option to move the clip around, and I prefer tip up carry for faster deployment so this is something of a disappointment for me, however, I wouldn’t call it a deal breaker. For an EDC knife, tip down carry is still acceptable and you will get the job done with this knife.

Deployment and Lock

The Scallion is a flipper, equipped with Kershaw’s Speed Safe assisted opening mechanism. The Speed Safe system was developed by Ken Onion as well, and is a very common assisted opening mechanism found on Kershaw knives. The action on the Scallion is snappy and reliable. The flipper works well, and there are phosphor bronze washers inside (although you don’t really notice with the assist).

The Scallion uses a either a steel frame lock, or steel liner lock to lock the knife open. The liner lock is sturdy and more than adequate for every day carry type tasks. My lock engaged early, and there was no blade play or stick in the lock. Kershaw has their liner locks and steel frame locks dialed in pretty well, and the lock on my Scallion is no exception.

Kershaw Scallion Review – Final Thoughts

The Kershaw Scallion is a capable budget EDC knife, but not without its quirks. It’s a great size for EDC, the materials are decent given the price point, the knife is well executed, is comfortable to use, made in the USA, and retails for under $50. Certainly there are some high points. On the flip side, the recurve blade makes the knife tough to sharpen, and 420HC stainless steel is on the low end of the spectrum, even at this budget price point. If you can get past those two points, then the Scallion could be a great EDC option.

Personally, if I was in the market for a Ken Onion / Kershaw EDC knife, I’d go with the Leek, but the Scallion has stood the test of time and continues to be a viable daily carry option that won’t break the bank.

Sale

Kershaw Scallion Pocket Knife (1620FL); 2.4 420HC Stainless Steel Blade and 410 Steel Handle, Featuring SpeedSafe Assisted Opening, Flipper, Lanyard Hole, Secure Frame Lock and Tip Lock; 2.9 OZ.,Small

KERSHAW SCALLION STAINLESS POCKETKNIFE: One of our most popular knives, the Scallion is a perfect knife that makes a great pocket or purse carry, ready to handle just about any task you’d ask of it. Compact, sharp, and made in the USA.
DROP POINT PLAIN EDGE BLADE: Made from tough, 420HC blade steel with extra carbon and chromium to boost hardenability and corrosion resistance. A bead-blasted finish adds a clean, matte look.
410 STAINLESS STEEL HANDLE provides a smooth, comfortable grip while in use. Silver with a bead-blasted finish to match the blade. Includes single-position pocketclip for right, tip-down carry.
DUAL LOCK SYSTEM: Equipped with Kershaw’s SpeedSafe assisted opening for easy one-handed release with flipper. Frame lock secures blade open while in use and Tip-lock slider keeps blade locked closed when folded.
SIZE SPECIFICATIONS: Blade Length: 2.4in. Closed Length: 3.5in. Overall Length: 5.75in. Weighing in at 2.9oz. Backed by Kershaw’s Limited Lifetime Warranty.

I recommend purchasing the Scallion at Amazon.com or BladeHQ. Thanks for reading.