drop point

Benchmade Mini Boost Review

As a rule of thumb, most knife nerds steer clear of blades with assisted openers. They’re regarded as obnoxious, tough to maintain, and not as prestigious as something with a truly dialed in detent. But can you guess which type of folks tend to prefer assisted openers? In my experience, the answer is simple – Those who actually use their knife as an everyday tool.

Buy the Benchmade Mini Bost at BladeHQ

Buy on Amazon

This brings me to the Benchmade Mini Boost. I know about AXIS Locks, but I’d never handled an assisted one. So, when the company offered to send one over for review, I leapt at the opportunity. Here’s my review of the Mini Boost, a blade which just might change the way you think about spring-fired knives.

General Dimensions and Blade Details

As its name would indicate, this is the compact version of Benchmade’s USA-made Boost design. It sheds nearly an inch and a half of its predecessor’s length, now reaching a modest 7.18-inches open. Blade span has been reduced from 3.7-inches to 3.11, while slimming the stock from 0.12-inches to a demure 0.10. The CMP-S30V steel remains the same, as does its drop point, flat ground nature. Last is the weight, plunging from 4.59-ounces to 3.31.

Enough numbers. Let’s flick the thumb stud, fire the AXIS Assist, and get to business.

As you can see from the cutting board photos, the Boost’s thin blade is an excellent slicer. Despite its American roots, the knife proved invaluable in the preparation of homemade General Tso’s Chicken. I had no trouble producing finely chopped pieces of ginger, garlic, and green onion. It proved equally capable in other daily chores, breezing through bags of dogfood and those annoying boxes for the toner cartridges at work.

This does bring up something of a sore spot. When you use things, they tend to get dirty. I like to maintain my tools, which usually involves some form of disassembly and cleaning. The Mini Boost, however, will get no such treatment from me. AXIS locks are fiddly to take down in the first place, but add in what I assume is some form of torsion bar or coil setup and, man, I don’t need that kind of frustration in my life. The bronze washers are easily accessible, and a periodic application of oil may be all you need to keep it firing reliably.

Speaking of reliability, I must have picked a good time to start reviewing Benchmades. While I’ve heard and read many complaints about their production and quality control, each of the three blades I’ve handled had zero problems. Maybe they’re closely monitoring the reviews samples, but I have nothing negative to report.

Handle, Ergonomics, and Pocket Clip

First impressions count for a lot, but they can also be deceiving. Take the Mini Boost’s width, for instance. My immediate in-hand reaction was, “Wow, this thing is thick.” And it is: 0.63-inches from a statistical standpoint. But take a look at this side-by-side comparison with the Spyderco Native 5.

See that? The spines are pretty much identical, though the Boost’s sides swell out a bit further. In the pocket, this width is surprisingly comfortable. Part of this is due to its excellent deep-carry clip. The knife rides low in the back of my pocket, where its girth actually puffs out the seam and makes the rest of my tools more accessible. I prefer thinner knives, sure, but this slightly wide feel also helps with grip. The polymer scales are a perfect pairing, though they can accumulate a bit of pocket grit. Still, I consider this to be an acceptable hazard for a work-first blade.

Let’s revisit the assist. Because of its sensitive thumb-stud deployment, Benchmade has included a safety switch above the AXIS Lock. This sends a piece of metal sliding into the mechanism, preventing the knife from accidentally deploying in your pocket. While I applaud their prudence in including this safety measure, it does cut down on some of the quick-fire appeal of an assisted blade. It leaves me wondering if assists and AXIS Locks are really meant to go together. It works, but the process definitely takes some getting used to. And while you certainly can carry it with the safety retracted, I was never quite comfortable with the idea of a loaded blade in my pocket.

That being said, management of the AXIS Assist quickly becomes second nature. I carried this blade for nearly a month before completing the review, during which time I grew to appreciate both its deployment quirks and slicing prowess. One-handed closing is tricky, sure. But I kept fidgeting with it, over and over, just for the satisfying SNAKT noise of the blade leaping into place. For all its added complication over something like the Kershaw SpeedSafe, this assist is much more fun.

Benchmade Mini Boost Review – Final Thoughts

Let’s close with a thought experiment. Imagine you’re working a manual labor job in a dusty, grimy environment. Would you prefer a slick-firing folder running on ball bearings or an easy-opening blade sandwiched between phosphor bronze washers? For me, the answer is simple – Assist all the way. Because, sweet as that bearing action may be, it’s only a matter of time before job site gunk finds its way into the action. The solid washers and spring will run faster, longer, and more reliably in most hard-use situations.

As such, I consider the Mini Boost to be a solid argument for the existence of assisted knives. This, along with the Zero Tolerance 0566, is a solid example of spring-fired excellence. Yes, it’s trickier to maintain. But when it comes to down and dirty work, most of the calloused-handed folks I know prefer a blade with fast-deploy capability. I can’t tell you how many Kershaw Leeks and Ozark Trail folders I’ve seen peaking above the pockets of coveralls and dusty jeans.

In the end, the Boost proved to be a perfectly acceptable single-solution knife. It carries easily, cuts like crazy, and holds a decent edge. I’m still perplexed by the sudden resurgence of S30V, and I’d certainly prefer a better steel at this price point. But aside from the S30 and its pudgy width, there’s not a lot to dislike here. While I still prefer the mechanical precision of a dialed in detent, I’m also not the sort of hard user who cuts through boxes and bags all day. If that’s you, then consider checking out the Benchmade Mini Boost.

ESEE Knives Black CANDIRU Fixed Blade Knife w/Polymer Sheath

I recommend purchasing the Benchmade Mini Boost at Amazon or BladeHQ.

Gerber StrongArm Review

by Travis Pike 6 Comments

One thing I have always had is a healthy respect for is a good fixed blade knife. As a young infantryman I fell victim to some clever marketing from Gerber and purchased the Gerber LMF II Infantry. It had infantry in the name so I couldn’t go wrong right? While I may have been a victim of marketing, I didn’t feel victimized. The LMF II served me well, but everything can be improved. The Gerber StrongArm is in many ways the successor to the Infantry, and is better suited to the infantry role.

Buy the Gerber StrongArm at BladeHQ

Buy on Amazon

The LMF II Infantry has a fascinating story and was built for a very specific purpose you should check out here. That specific purpose resulted in the knife’s lack of a full tang. The Gerber StrongArm resolves this issue. The StrongArm is a little lighter, a little shorter, and is more refined than the Infantry LMF II. The StrongArm is a versatile capable, and affordable knife made in Portland, Oregon.

General Dimensions and Blade Details

The Gerber StrongArm has 4.8 inch fixed blade made from 420 HC steel, is 9.8 inches overall, weighs 7.2 ounces and is proudly made in the United States. This is a classic fixed blade knife that isn’t trying to revolutionize the standard military style survival knife. In terms of fixed blades it’s actually somewhat small. It’s a half inch shorter than the LMF II Infantry, but has an almost identical blade length.

Gerber StrongArm

The knife is easy to carry, and perfect for those looking to trim as much weight as possible from their loadouts. That’s generally the goal of dismounted infantry. Ounces equal pounds, and pounds equal pain.

The StrongArm comes with options for both a serrated or plain edge. I prefer the plain edge. The blade is coated with a cerakote black matte finish. The finish is tough, but will wear with time and effort like any finish would. The 420 HC steel does mean that once the finish is worn away rust may develop. Keep the knife cleaned, and oiled as the finish migrates and you won’t have any issues.

The older FDE StrongArm you see here has been used and abused hard for a year. It’s been hunting, camping and fishing. The knife has been used to hammer, pry, and dig and its taken a few hits to the finish as you can see.

Gerber StrongArm Brown vs. Black

420 HC steel is a cheaper steel, and this is a knife on the affordable side. The downsides to 420 HC is that it won’t hold an edge for long. It’s one of those steels you sharpen before any really heavy duty cutting is needed. For a survival knife you don’t necessarily need a razor sharp edge for day to day work. It stays sharp enough for cutting paracord, stripping wires, and slicing through clothing for some time.

When it comes time to cut through thick materials you may need to run the blade over or through a sharpener a time or two before you go wild. 420 HC steel can actually get impressively sharp if you know your way around a sharpening stone. I’ve never failed to be impressed at how sharp my Dad makes his old Buck knife before skinning a deer and its made from the same 420 HC steel.

Gerber StrongArm Blade

The StrongArm has a squared off spine that’s perfect for stripping bark, batoning wood, striking a ferro rod, and truncating wood. All tasks the Gerber StrongArm can commit to with real force. The StrongArm’s small handguard doesn’t really allow for a thumb on the blade grip so the less comfortable square spine isn’t an issue.

Handle and Ergonomics

The handle on the StrongArm is an interesting design. I do find it slightly smaller than necessary, but to be fair I have XL sized hands. Even with my large hands I still find the grip comfortable. The smaller grip isn’t much of an issue due to its design.

The Gerber StrongArm is glass filled nylon that’s covered with a rubber overmold. This makes the grip ‘soft’ in the hand. Squeezing it tight doesn’t result in much fatigue or pain. The little bit of give the rubber overmold offers results in a lot of comfort. The little bit of give also allows the blade to mold to your hand just a bit.

The rubber overmolded material is coated with a raised diamond textured pattern. This glues the knife to your hand and is perfect for cold, wet, or gloved hands. The pattern is rough, but doesn’t rub the hand raw, or even really create hotspots that I’ve noticed.

Gerber StrongArm in Sheath

The bottom of the handle is a small pommel. It’s a lot smaller than the LMF II, but still capable enough to smash windows and skulls. It’s also got a lanyard loop if your StrongArm needs a leash.

Sheath

We’ll finish this up talking about the brilliant sheath system Gerber included with the StrongArm. It’s designed to be adaptable to the user. Popular knives typically have plenty of sheath options, but with Gerber you are getting all of them with the knife.

Gerber StrongArm Molle Compatible

This includes a MOLLE mount, a drop leg system, and a belt loop option for horizontal carry. The knife is too big for any kind of horizontal concealed carry, but it’s really great for a snag free carry while wearing armor. When you draw from a standard belt carry sheath while wearing armor you are likely to get snagged on your gear in one way of the other. Drawing horizontally from the belt prevents this.

I also like the horizontal belt mount for mounting the knife vertically on my pack straps. This means my knife never leaves the pack I go camping with.

The Sheath employs both passive and active retention depending on the mount being used. The active retention is a simple snap button thong. The passive retention comes from an indent in the center of the handle. The sheath locks into this indent and holds the knife well.

In all my adventuring near and far it hasn’t fallen out when I’m using only passive retention. The sheath is also outfitted with plenty of lashing holes for those who aren’t satisfied with the included sheath options.

Gerber StrongArm Review – Final Thoughts

The Gerber StrongArm is a great little knife, especially when you factor in a street price of around 50 bucks. Gerber’s reputation was hit hard by imports of poorly made foreign knives, but they seem to be working hard to fix that reputation. The StrongArm is proudly stamped made in Portland, Oregon. The StrongArm is one of many made in USA knives in their catalog and likely one that will be around for a long time It’s an excellent budget bushcraft knife.

The StrongArm may not be the LMF II Infantry, but it’s a great knife, and a worthy successor to the LMF II.

Gerber Gear StrongArm - Fixed-Blade Camping & Hunting Knife with Striking Pommel & Sheath - Premium Survival Gear - Made in USA - Black, Plain Edge

Iconic Strongarm Design: This Gerber Gear fixed blade knife features a full-tang, 420HC steel blade with a ceramic coating
Dependable Cutting Knife: Our camping knife boasts a rubberized diamond-texture grip for secure handling
Versatile Knife Sheath: The StrongArm knife includes a MOLLE-compatible sheath for adaptable carry options, ensuring the hunting knife is accessible
Tactical Edge: This fixed-blade knife also features a striking pommel, ideal for survival tasks in the toughest environments

Editor: I recommend purchasing the Gerber StrongArm at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Zero Tolerance 0450CF Review

by Dan Jackson 17 Comments

I don’t know about you, but sometimes I lust after knives for months, or even years, before pulling the trigger. That was the case with this Zero Tolerance 0450CF. The original 0450 was cool, but the carbon fiber version put me over the top. It’s a little lighter and sleeker, and the choice of green anodized accents isn’t something you see on a lot of knives. I decided I wanted one, but could never find a decent deal on it.

Buy the ZT 0450CF at BladeHQ

Buy on Amazon

Fast forward a couple years later, and I received a trade offer that included this 0450CF. Right on. I immediately responded back that I was interested, and a few days later the knife was at my doorstep.

By way of a more formal introduction, the 0450 series is a riff on the original Dimitry Sinkevich designed 0454CF that I reviewed back in 2014. Chad McBroom reviewed the mass marketed 0452CF and Ben reviewed the shrunken down full titanium 0450. I’ve got the ultra light 0450CF for your consideration today.

General Dimensions and Blade Details

The 0450CF has an over all length of 7.375″, a 3.25″ blade, and weighs a mere 2.45 ounces. Like all Zero Tolerance knives, the 0450CF is made in the USA.

The 0450 and the 0450CF are reactions to the knife market. Zero Tolerance is know for large overbuilt knives, but they received feedback that everyone didn’t want to carry around a big honking pocket knife. So the 0450 hit the scene, and then this 0450CF took that even further by replacing the titanium show side handle with carbon fiber. This shaved over almost half an ounce off the already lightweight 0450. This, my friends, makes for an ideal EDC knife in my book.

The 0450CF shares the same low slung blade that made us all fall in love with the 0454CF when it hit the scene. It’s a long, sleek, modified drop point blade, featuring a little belly and plenty of tip. The knife has a high flat grind and a decorative swedge. The blade has been given a semi-glossy black DLC coating. The edge has been uniformly applied, and there is a sharpening choil so you can easily sharpen this blade from tip to heel.

ZT opted for S35VN for the blade steel. Regulars to the site or high end knives need no introduction to S35VN. It’s a high performance stainless steel from Crucible designed specificaly for pocket knives with the help of Chris Reeve. It’s an excellent all round blade steel and a good choice for small pocket knives like this as it offers a good balance of edge retention, toughness, and ease of sharpening. I like S35VN generally, and they did a great job with the heat treat on this 0450CF. As always if you want to dive deeper into blade steel check out our steel section for all sorts of additional info.

Practically speaking this little 0450CF is a capable cutter. The blade shape is perfect for getting under envelopes, breaking down boxes, cutting fruit, and performing all the little odd ball chores I require of my EDC knives. That said, I must agree with Ben that this knife is not the best slicer. The partial flat grind binds up in material. While it cuts, it’s no Alox Cadet. This is probably my biggest gripe with the knife.

The S35VN blade has held up great, and so has the Diamond-Like Carbon (DLC) coating. DLC coatings are among the best money can buy, and unless you scrape this knife on concrete or metal it will hold up well.

Handle, Ergonomics, and Pocket Clip

The handle of the 0450CF is a solid piece of carbon fiber on the show side, and a black DLC coated titantium framelock on the reverse. The knife is held together with two green aluminum standoffs and an oversized pivot. Construction is simple yet elegant. All the hardware is black save for the green anodized standoffs. The fit and finish is exceptional. The screws are all the right length, the parts line up perfectly, and the finish work is excellent. The carbon fiber is lightly textured, and shimmers slightly in the light. This handle has been beautifully done.

The 0450CF is a small knife, but it doesn’t compromise in the ergonomics department. Dimitry’s design is simple and it should work well for most people. I take an “XL” size glove and have no problem getting a full four finger grip on this knife.

There is a short row of jimping on the spine that provides you with a little traction and something to index your thumb on. Beyond that there is not much in the way of texture. That’s fine by me as I don’t think this knife needs aggressive texturing. It works well as is.

The pocket clip is a standard parkerized black spoon style pocket clip. It’s relatively discreet and unobtrusive. While it’s not a true deep carry clip, it buries the majority of the knife in your pocket and keeps the 0450CF tucked away. The clip is swappable for right or left side tip up carry. A deep carry clip would have been nice.

I have carried this knife quite a bit. The 0450CF is a knife that you forget you are carrying. At just under 2.5 ounces this is not going to pull your pants down. The clip has great retention and the knife stays where you want it to in your pocket.

Deployment and Lockup

This is a Dimitry Sinkevich designed flipper made by Zero Tolerance, so the flipping action is outstanding. The detent is perfectly tuned for crisp, snappy flipping action each and every time. I’ve never “flubbed the flip” with this knife and I’d say the action is a solid “8” on the 0-10 scale. It’s good. Inside you have a caged bearing system. It is exceptionally smooth and you can shake the knife closed easily.

Please note I’m a lefty, so I don’t have any issues with putting my fingers on the lock bar when flipping the knife. I tried flipping this 0450CF with my right hand. Beside it being incredibly awkward for me, it works fine. No issues flipping open this knife. I think ZT fixed the issue that plagued their earlier knives.

Here is a shot of the 0450CF next to another excellent EDC knife, the Spyderco Sage 1:

For lockup we have a titanium frame lock with a stainless steel insert. Zero Tolerance does such a good job with these, that I almost feel that writing this section is unnecessary. The lock bar engages early and securely. The lockup is rock solid with zero blade play in any direction. The lock is smooth and easy to manipulate with no lock stick. This is titanium frame lock perfection and continues to be something of a gold standard in my world.

Blade centering is dead nuts center on my knife.

Zero Tolerance 0450CF Review – Final Thoughts

Ben was a little lukewarm on his 0450. He didn’t like the way the knife cut, the ergonomics, and he had issues with the action. Aside from that Mrs. Lincoln tells me the play was OK.

I think Ben raises valid points. A little knife like this should zip through stuff, but the combination of narrow blade and partial flat grind impacts the 450CF’s slicing performance. It still cuts, but it could be better. Personally, the ergonomics were spot on for my hand, and I found that the 0450CF flipped great. Ergonomics will vary from person to person, and I think ZT addressed the flipping action.

All in all, I am glad I picked up this little 0450CF. It’s as cool in person as I always hoped. I like the look of it over the standard 0450 and how it’s even lighter with this carbon fiber handle.

The 0450CF is an excellent little EDC knife in my book. With a retail price at close to $200 it’s not cheap, but I’m glad I went for it. The 0450 is probably ZT’s most practical EDC offering for the average person. This carbon fiber version takes things up a notch.

Zero Tolerance 0450CF Folding Knife, 3.25" DLC S35VN Blade, Carbon Fiber & Titanium Handle, KVT Ball-Bearing Opening, Frame Lock, 2.45oz

3.25-inch S35VN steel blade shows amazing toughness and resistance to edge chipping, with improved edge retention. Blade Thickness: 0.121 inches
Handle features a carbon fiber front and sturdy titanium back for comfortable in-hand feel, increased strength and excellent size/weight proportion
DLC-coating on the blade gives sleek matte-black look and enhanced performance characteristics
Great companion for hunters, business professionals, wilderness guides, survival experts, first responders, military, law-enforcement and more
Ideal gift for any special occasion such as birthdays, holidays, graduations, anniversaries, promotions, weddings and more

I recommend purchasing the Zero Tolerance 0450CF at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Spartan Blade Works Pallas Review

by Dan Jackson 8 Comments

Last Updated: August 8, 2019
Most of us who have been following Spartan Blades know the company started with high end fixed blade knives. A few years ago they launched the Akribis, a carbon fiber clad titanium framelock folder. I always appreciated the lines of the Akribis, but never got around to acquiring one. Although some of their old stock is still for sale on select retailers, Spartan Blades has since moved on from the Akribis and ventured into a number of different folder offerings.

Buy the Spartan Blade Works Pallas at BladeHQ

Perhaps their most notable new folder is the Pallas. This strikes me as their every man’s model: a sub 4″ blade, anodized aluminum handles, sturdy button lock, and your choice of flipper or thumb studs to get the blade open.

This is a less exotic folder designed for daily carry and use, and could be considered their version of a Griptilian or Para 2. I have always had a soft spot for utility knives in this size range, and have many in my permanent collection. How does the Pallas stack up against everything that has come before it? Lets find out.

General Dimensions and Blade Details

The Pallas has an overall length of 8.75″, a 3.75″ blade, weighs 4.9 ounces, and is made in the U.S.A. With an almost 4″ blade, my guess is that Spartan Blades wanted the Pallas to flex both into utility and folding combat knife roles. It is about as big a folder as I can realistically carry. Any bigger, and it would be more of a novelty for me, but a 8.75″ inches I can comfortably carry it and use it as a weekend warrior EDC here in Southwest Florida. I’ve used it extensively in that role. It has accompanied me on trips to fix up my rental house, and plenty of forays into the yard trimming back our “jungle”.

The blade of the Pallas is a modified drop point. This is a simple and functional design, but Spartan Blades has added their signature harpoon tip to give it a twist. At just under 4mm thick, the blade stock is substantial, but the knife is ground thinly behind the edge with a high hollow grind. When you add a fine tip and plenty of belly, you are left with a versatile and functional blade. Spartan Blades also took the extra steps of adding a long swedge across the harpoon tip, chamfering the spine of the blade, applying a nice stonewashed finish, and installing custom thumb studs.

Spartan selected S35VN blade steel for the Pallas. As I have mentioned in countless other reviews featuring S35VN, this is a great choice for a high end folder due to it’s ease of sharpening, corrosion resistance, toughness, and edge retention. It’s a great all round steel. It won’t hold an edge indefinitely, but it’s easier to sharpen then its older brother S30V. It’s no wonder companies like Chris Reeve Knives choose S35VN almost exclusively as their blade material.

The only downside I see to S35VN is that it forces knife reviewers to the very fringes of their creative writing capabilities as they tackle their XXth review featuring this now common blade material. As always you can find a deeper dive into blade steel in our blade steel section

In practice I found that the Pallas is a solid cutter. Thanks to a generous handle, you are able to make full use of the substantial blade. It came razor sharp out of the box, and I have spent a good amount of time breaking down boxes, carving, and even performing some mild food prep with this knife. This knife cuts for days, and the performance is impressive. While it’s not the most unique or beautiful blade I have worked with, you can’t argue with the results. The Pallas performs.

Handle, Ergonomics, and Pocket Clip

The Pallas comes with a hard anodized aluminum handle, held together by 3 custom standoffs and the pivot. The handle is mostly flat. It has been chamfered around the edges, features 2 grooves for your index finger, and a series of diagonal cuts towards the butt for traction, but there is no 3-D milling. Overall, handle construction is neat and solid. Even the lanyard hole has been given extra attention.

That said, this handle loses style points in a few areas for me. First, I don’t care for how the logo and “U.S.A.” have been applied to the handle. I realize that this branding and source of manufacture information needed to be placed somewhere, and there is only a limited amount of real estate on the knife. I also know some have criticized companies like Zero Tolerance for putting too much text on their blades, distracting the eye and complicating the design. Still, I think the placement of the logo and “USA” on the handle looks a little random.

Also, I think a more generous decorative pivot would have looked nicer here then just a body screw. This choice was likely made so the end user doesn’t confuse the button lock with the pivot in the heat of the moment. Plus a decorative pivot does nothing for the performance. But many knives these days feature a decorative pivot. Finally, when you peer into the internals of the knife the pocket screws are a millimeter or proud of the handles. Screws poking out from inside the handle/liners are a pet peeve of mine, and I would love to see the screw length adjusted slightly so they don’t poke out like that.

Aesthetic quibbles aside, the simple handle designs provides ample room for your hand and fingers while the hard anodized aluminum provides you with that familiar fine texture. There is light jimping on the spine of the blade, and more aggressive jimping towards the butt of the handle. The end result is a knife that functions naturally in the hand. While hard anodized aluminum isn’t as grippy as peel ply G-10, I find there is plenty of traction here for all the tasks I put the Pallas up to.

The Pallas benefits from a simple pocket clip that has been thoughtfully executed. This is a humble spring clip, but it has been elevated with Spartan’s arrow motif cut into the clip. I vastly prefer this kind of branding over a “billboard” style pocket clip. The clip has been sunk into the handle and secured with 2 screws. It’s not likely to go anywhere. However, the handle is configured for right side tip up carry only. This happens to be my preferred placement for carry, but it may pose an issue for some.

In practice the Pallas carries nicely. It’s a bigger knife, but is relatively thin and light. I don’t notice it much in the pocket. It stays out of the way, but doesn’t carry super deep. When I’m ready for the knife the combination of handle and clip make for an easy retrieval. What else can you ask for?

Deployment and Lockup

The Pallas comes with a combination of flipper and thumb studs to get the blade open.

Lets start with the flipper. Because this is a button lock, there is no detent. Instead, the button lock is engineered to offer some resistance, and that friction in the lock allows you to pop the knife open. In practice the flipper works most of the time, especially if you are careful to pre-load it. Still, this knife will not flip open like a well tuned framelock or liner lock flipper. I would assign it a “4” on my arbitrary 1-10 scale of flipper performance, placing it slightly below my Spyderco Domino. It usually gets the job done, but nothing to write home about.

The thumb studs are ample, custom made, easy to access, and placed for ambidextrous access. These thumb studs are what you would want to rely on in a stressful situation. I’m glad Spartan Blades included them. They compliment the workman like nature of this knife.

Either way you choose to open the Pallas, the blade rides on caged bearings. The action is smooth and fluid.

Spartan Blades selected a button lock for the Pallas. The button looks similar to what you would find on a Hogue, and I can’t help but place the knife next to my EX-04 (shown above).

Button locks have the potential to be sticky, but the lock on the Palls is extremely smooth. I have yet to have the lock stick or bind up. I have owned this knife for several months now and it’s just as easy to operate as the day I got it. A nice benefit to a button lock is that it is a strong lock. Although every folding knife has its breaking point, I do not hesitate to use my Pallas for tough jobs. There is no blade play or wiggle in my knife. Also, I should note there is no secondary lock like you find on the Hogue series.

Blade centering is perfect on my knife.

Spartan Blades Pallas Review – Final Thoughts

The Pallas is a no-nonsense tool in the same vein of many of my favorite utility knives. This includes fan favorites like the Para 2 and Griptilian, but also some of the unsung heros in my collection like the American Lawman, Buck Marksman, and Hogue EX-04. I don’t hesitate to carry and use the Pallas just like those other knives. The practical design, excellent tolerances, and quality materials, mean that the knife works, and it works well. If I’m in a rush I can grab the Pallas knife knowing it will do everything I need it to do – no questions asked.

Where the Pallas falls a short for me is with some of the aesthetic details like the placement of the logo on the handle. The flipping action also leaves something to be desired. For a knife you are going to use hard I can look past these issues, but would not be so forgiving if I was buying a collectible.

Also, at nearly $300 the Pallas isn’t cheap. It’s a serviceable design, nicely made, and performs beautifully, but it doesn’t have any mind blowing properties to it, and the materials are not particularly exotic. I realize that Spartan Blades is a boutique company that is offering a USA made product, and they likely lack the economies of scale that the bigger manufacturers can tap. Still, the Pallas is an expensive knife, and the price will prevent it from obtaining the mass appeal of a Paramilitary 2 or Griptilian.

In closing, I like this knife, but think the Pallas is for a narrower market. I recommend it if you are a fan of Spartan Blades, a fan of the design, or are looking for a high end and high performance tactical knife that is made in the USA.

Spartan Blades Blacked Out Pallas Folding Flipper Knife Button Lock Black SF3

Overall Length: 8 3/4" Blade Length: 3 3/4" Blade Material: CPM S35VN Stainless Steel, 58-60 HRC
Blade Thickness: 5/32"; Blade Finish: Black PVD Tungsten Black DLC; Blade Type: Plain Edge Drop Point
Closed Length: 5 1/8" Handle Material: Black Mil Spec Anodized Frame
Safety System: Button Lock; Carry System: Pocket Clip
Weight: 4.736 Oz.; Made in the US

I recommend buying the Spartan Blades Pallas at Amazon, BladeHQ or KnifeArt. Thanks for checking out the review.

KA-BAR Dozier Folding Hunter Review

by Benjamin Schwartz 7 Comments

Last Updated: July 27, 2019
The KA-BAR website tends to be pretty laconic with its product descriptions in general, but the terse, colorless description they provide for the KA-BAR Dozier Folding Hunter would make the editor of technical manuals nod off mid-sentence:

“Award-winning lock back designed by Bob Dozier is an affordable, practical all-purpose knife appropriate for daily tasks. Features a reversible pocket clip and thumb stud.”

Buy the Ka-Bar Dozier Folding Hunter at BladeHQ

Buy on Amazon

I can certainly sympathize with the KA-BAR copy editor. On a superficial level, what is there to say about the simple Dozier Folding Hunter? It was originally released in 2003, and as far as I can tell it has hardly changed at all since then, submerged in the nearly-empty waters of the sub-$20 big brand knife bracket like one of those ancient fish that have kept their prehistoric forms for millions of years.

On the other hand, such longevity without change is virtually unheard of, especially in the budget realm, where we’ve already forgotten that the Spyderco Tenacious used to be the absolute cutting edge under $40 just a few years ago. Like the Tenacious, the Dozier won Best Buy at Blade Show the year it released. Unlike the Tenacious, the Dozier remains relatively unchallenged at its price point. It’s still one of the original freaks of the knife world, a sui generis offering that nothing much really directly compares with.

It was a knife I have been meaning to try out for a long time. So I picked up a trio of Dozier Folding Hunters to see what there was to see. Is it still a watermark in the budget realm, or a fossil from a different age? Let’s take a closer look.

General Dimensions and Blade Details

The Dozier has a blade length of 3”, a handle of 4-3/16”, and an overall length of 7-1/4”. It weighs 2.4 oz and is made in Taiwan. There is a smaller Dozier but I think the full-size model is the one you should go with. It still weighs nothing and you get a jump up in utility with the increased blade size.

A fit and finish note: while general fit and finish was good across all three Doziers I purchased, there was some variance between the blades grinds. The blue one fared the worst, with a noticeable recurve. The olive green sample was better, albeit with an uneven edge grind – the sharpened edge goes down farther on side than the other. Leslie’s Zombie Green model was far and away the winner, with a truer edge and clean, consistent grind.

I don’t like playing the “What do you expect for $20” card because, even when I shell out $20, I expect a good knife made to consistent quality standards. So it’s definitely a mark against this knife that there is so much variance here. However, I would be fibbing if I said it made the slightest bit of difference in cutting or sharpening.

Depending on where you go this model’s blade is called a “spear” in some places, a “hunter” elsewhere, and a “drop point” in still others. Hairsplitting aside, it’s a great blade shape; there’s not much you can’t do with it, and the 3” length is just right. It’s also another exhibit in the case for hollow grinds in mid-size blades: I think they perform better overall, especially outside of food prep tasks. Even with a fairly narrow blade profile, the Dozier zips through material effortlessly.

It’s easy to get repetitive in describing steels, but to be brief: AUS-8 is just great. Highly corrosion resistant, easy to sharpen, and offering good edge retention, I think it is demonstrably better than 8Cr13MoV. It’s the perfect steel for a first-time knife user or for someone who doesn’t really care about knives and just needs something that will work for a long time. One of these Doziers went to work with my girlfriend every day and she appreciated that it held up well to regular use. Even for us enthusiasts it holds plenty of appeal.

Handle, Ergonomics, and Pocket Clip

The Dozier’s handle is stripped of all embellishment. A simple bow shape, designed to accommodate the curvature of the human hand. Construction is equally simple, a two-piece Zytel build, with the partial backspacer integral to the off-side scale. Diamond texturing molded into the Zytel imparts a decent amount of grippiness here.

The handle’s simplicity works in its favor. One issue with ergonomic details like finger choils is that they always mean the knife favors a certain grip. Even a wonderfully comfortable knife like the Strider PT CC works better in the forward grip than in reverse or pinch grips because of its famous double finger grooves. The Dozier’s simplicity may not be as immediately gratifying, but it is never problematic, never less than accommodating. Try and find an uncomfortable grip on this knife: if you manage to do so, you’re probably holding it by the blade.

The reversible pocket clip is long and slender, and recessed into the handle like a Sebenza clip – a nice detail because it prevents side-to-side wiggle. Although thin, it is made from a fairly thick piece of steel – mostly a good thing as it is extra durable, but it does mean that retention is pretty tight. Things should loosen up over time (and thankfully the clip’s retention point is on a non-textured surface in the center of the handle), but even out of the box, it’s far from unusable. The knife itself is nice and thin in addition to being lightweight – an easy carry in almost all circumstances.

Deployment and Lockup

For deployment the Dozier utilizes a single, reversible thumb stud. I’ve always like the single thumb stud idea – just seems like a more efficient use of material, which of course is in keeping with the generally efficient, streamlined design of this knife.

As with any lockback there’s friction during deployment, but the blade can be flicked out or slow rolled with relative ease after a little break-in. One interesting element of the Dozier is the complete absence of washers or bearings: instead, the blade pivots on raised, washer-shaped areas of Zytel. Even with this rudimentary construction, the primary sensation during opening is one of smoothness. This was consistent across all three review samples.

The Dozier’s lockback has some definite spring to it. It snaps into an open position and disengages with an audible pop. Lockup is sound: there’s no side-to-side play, although a slight up and down movement can be detected. Almost all lockbacks I’ve owned exhibit this to greater or lesser degrees so I’m not worried about it. I’m confident in saying that the Dozier could withstand a fair bit of hard cutting before you’d notice any issues with the lock. And along with the clip and thumb stud, it means the Dozier is 100% ambidextrous.

KA-BAR Dozier Folding Hunter Review – Final Thoughts

The Dozier is a knife from a different age. It predates our modern obsessions with lock types, flipping action, celebrity designers (Bob Dozier may be a legend but his name doesn’t have the current cachet of a Jesse Jarosz or Rick Hinderer) and all other knife nerd fallalery. There’s nothing wrong with enjoying these things, but there’s something bracing about carrying a knife that ignores so much of them and still functions so well. It’s a real tonic for today’s overexposed, oversaturated, overanalyzed knife world.

After fourteen years on the market, the Dozier is still one of the best deals around. It makes no real compromises and has no real weaknesses other than a lack of visual appeal. An enthusiast would never want this to be his only blade, but realistically it does all that you should ask of a folding knife. It won’t be my last knife – and it won’t be yours – but it could be if we ever shake the knife collecting bug.

KA-BAR Dozier Folding Hunter Knife Black, Medium,steel

DOZIER FOLDING HUNTER-BLACK
We've been making knives since 1908
Each knife undergoes our unique manufacturing processes and testing
Ensuring corrosion resistance, strength, edge-holding ability, and an out-of-the-box razor-sharp cutting edge.
Blade Detail: Plain

Editor: I recommend purchasing the Ka-Bar Dozier Folding Hunter at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Benchmade 560 Freek Review

by Dan Jackson 11 Comments

Last Updated: July 15, 2019

As much as I enjoy picking up the latest “gee whiz” must have knife of the moment, I get the most satisfaction in sharing a great knife that may have flown under the radar. This particular knife has flown so far under the radar, I would not have even heard about it if reader Darren hadn’t gone out of his way to send me a couple emails about the knife and how much he enjoyed it. Thank you, Darren.

Buy the Benchmade Freek at BladeHQ

Buy on Amazon

Enter the Benchmade 560 Freek. Like our friend the Bruised Forehead, the Freek didn’t win the knife name lottery. It also doesn’t benefit from being designed by a high profile knifemaker. And I don’t recall much in the way of fanfare from Benchmade or the knife collector community when the Freek arrived on the scene. It was quietly released. Rather than being a subject of media attention, the Freek has slowly earned a reputation for being a practical tool from those who have given this unassuming knife a chance.

I liken the Freek to the Benchmade Volli, another no-frills knife that didn’t get much attention, but may be be one of the best all-round EDC knives that Benchmade has released in the past 5 years. The Freek is cut from the same cloth. It’s another function over form design that is worth consideration if you are in the marketing for a largish EDC knife.

General Dimensions and Blade Details

The Freek has an overall length of 8.46″, a 3.6″ blade, and it weighs 3.72 ounces. This knife is made in America. As I mentioned earlier, I’d classify the 560 Freek as a large EDC knife. It could possibly be used as a hunting knife, as it has a good belly and shares the blade profile of their Saddle Mountain Skinner. Of course a knife of this size could also be used as a duty knife for a police officer, or perhaps pressed in to other self defense type applications. This is a versatile knife.

The drop point blade is distinguished by a curving thumb ramp and high flat grind. The blade is 2.9mm thick, and gets thin behind the edge thanks in part to that high flat grind. The edge has been neatly applied, and like on pretty much all the Benchmades I’ve owned over the years there, is a sharpening choil allowing you to sharpen the edge all the way down to the heel. The tip is fine, but the the deep belly keeps it out of the way. Again, this lends me to believe this could be a decent hunting knife, although frankly I’ve never been on a hunt in my life.

Benchmade has gone with tried and true S30V steel for the Freek. Although S30V has fallen slightly out of favor thanks to the widespread adoption of it’s more exotic cousin S35VN, I find that Benchmade does a particularly good job with their S30V. Case in point my Volli with its 2.5mm thick blade cuts like almost nothing else I own. That thing is a laser. The Freek is right up there. This knife is a phenomenal slicer, the S30V blade holds an excellent edge, and I found it to be an easy edge to maintain with strops and the ceramic rods from my Spyderco Sharpmaker.

This knife makes quick work of cardboard, laughs in the face of of your lunchtime apple, and will capably assist you with all those odd cutting tasks that crop up in our daily lives. Much like the Volli, the Freek is a knife that I looked forward to busting out when it came time to break down a box or open a package. It’s a performer and the S30V blade steel punches above its weight thanks to the heat treat and grind.

Handle, Ergonomics, and Pocket Clip

The handle is where things get interesting, and also where the knife is bound to alienate a significant section of the audience. Like the Griptilian, this is a plastic handled knife with partial stainless steel liners. Unlike the Griptilian, the Freek has a unique high density rubber (“Versaflex”) overmold that is bonded to the plastic. The end result is a lightweight grippy design that is unlike anything else in my collection.

Some will love the lightweight nature of the design and the non-slip feel to the handle. Others will dismiss it as being cheap and plasticy. If you couldn’t stand the feel of the handles of the original Griptilian, then my guess is you will want to skip the Freek. But if you don’t mind trading G10 for a large ultra light knife, then the Freek could be a winner for you.

The ergonomics of the Freek benefit from a streamlined handle design. There are few curves, and little reliance on jimping except for the thumb ramp. Although the handle is textured, it’s not an abrasive knife in the hand. The end result is a no-frills handle that is comfortable and secure in all kinds of conditions. The Freek easily accommodates my larger hand, and the handle is well suited for extended use and hard tasks.

This knife comes from the factory with Benchmade’s split arrow clip. I’ve long been a fan of this clip, and here it is situated for ambidextrous tip-up only carry. This is a discrete knife that and buries deeply in the pocket. Benchmade left part of the FRN endoskeleton exposed where the pocket clip meets the handle, and that makes for easy insertion and extraction of the knife from your pocket.

At well under 4 ounces I found the Freek to be an easy knife to tote around. It’s about as thick as the Griptilian and carries comparably. On that note, it’s worth stating that the Freek is actually almost half an inch longer than the Griptilian but weighs .16 ounces less.

Deployment and Lockup

There isn’t a whole heck of a lot new here to say in this section. This is a thumb stud axis lock knife. A tried and true design. Here the thumb studs and phosphor bronze washers work just as great as they did on my original Griptilian. While bearings are all the rage, I think something needs to be said for bronze washers. Especially for a thumb stud equipped user knife like the Freek. Bronze washers are still exceptionally smooth and are ideal for working knives like this.

I continue to appreciate the axis lock for it’s simple and intuitive design. Plus I always appreciate that this is a fully ambidextrous knife. Lockup is secure, but as you would expect from a plastic handled partial liner axis lock knife, there is a little side to side blade play. Nothing to get upset about, just a trade off in the design. Personally, I’m happy to exchange a modicum of side to side blade play for all the practicality and utility that this design offers. Your mileage may vary.

Blade centering is pretty good. It slightly favors the pocket clip side of my knife, and is far from rubbing.

Benchmade 560 Freek Review – Final Thoughts

For those wanting a premium lightweight work knife with an over 3.5″ blade, I think the Freek is a no-brainer. Benchmade has been refining this type of knife for years. It’s like a Griptilian but it is leaner and meaner, yet also slightly larger. Perhaps it’s oriented slightly more towards the lightweight camping and hunting ground. Benchmade doesn’t offer much insight in their product descriptions, but for some reason I keep going back to hunting when I consider the Freek.

Those that can’t stand the plastic scales on the original Griptilian would be well served to steer clear of the Freek. Instead check out the Volli or the G-10 Griptilian. Those models will also provide you with great cutting performance and ergonomics, but will also be a little stouter than the Freek.

I am glad Darren called this model to my attention. I hope in writing this review I have turned at least a couple people on to an excellent “sleeper” knife from Benchmade.

Benchmade - Freek 560, Drop-Point Blade, Plain Edge, Satin Finish, Black/Grey Versaflex Handle, Made in the USA

HIGH-QUALITY: The CPM-S30V stainless steel blade is extremely well-balanced, offering superb edge qualities and rust resistance. The Grivory and Versaflex dual durometer handle offers strength, comfort, and grip.
WELL-DESIGNED: Benchmade's AXIS lock is exceptionally strong and fully ambidextrous. The Freek 560 is a manual knife that can be opened and closed with either hand.
ALWAYS READY: The 560's quick, one-handed opening makes it easy to hold and use. The reversible pocket clip offers ultimate accessibility.
VERSATILE: The Freek 560's drop-point, utility blade style and all-around functionality make it ideal for everyday carry.

I recommend purchasing the Benchmade 560 Freek at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.