154cm

Emerson Mini CQC-7 Review

Last Updated: August 3, 2019
As Dan wrote in his review of the full-size model, the CQC-7 is one of the very first and most influential tactical knives in the world. Ernie Emerson’s influence on the perception and use of folding knives for self-defense is incalculable. I had wanted an Emerson knife for a long time, but my general reluctance to carry a blade over 3” meant that most of their standard models, the CQC-7 included, were a no-go. I had my eye on the Mini CQC-7 for a long time before it came back into production and I was able to pick one up.

Buy the Emerson Mini CQC-7 at BladeHQ

Buy on Amazon

History aside, my thoughts on this design are mixed. I think that the CQC-7’s pedigree has made EKI loathe to futz with the design of the knife, and users loathe to criticize it. This is a shame, because I think there’s a lot of room for improvement. Like the Delica, the Mini CQC-7 is an outdated knife. When it first released, it must have seemed like a revelation, but in 2016, it is neither the best design around, nor worth the price it is being sold at.

General Dimensions and Blade Details

The Mini CQC-7 has a blade length of 2.9”, a handle length of 4 1/8”, and an overall length of 7.25”. It weighs 4.4 oz. This is a fat knife, but one that feels quite balanced in the hand. The exact weight of a knife isn’t as important as the distribution of that weight: that’s why some light knives, like the Clipitool, can feel heavier than they are, and chunky knives like the Mini CQC-7 lighter.

The 2.9” blade, on my Mini CQC-7, is a chisel ground tanto. This is a real one-two punch in terms of things I have grown to dislike. There’s an unwarranted reverence for the tanto blade shape. I appreciate a run of straight edge on my blades but I want some belly too, and the stylized, angular shape of the American tanto lacks any at all.

Of course, it’s the tanto’s reputation as an ideal tactical blade shape that gives it its cachet. And it is a good piercer, with a quite a robust tip. But a good drop point or clip point blade would have excellent piercing capability and more than adequate tip strength, as well as a significantly more useful overall shape. I don’t carry a knife with the intention of using it for self-defense, but even if I did, I would prefer another blade shape: the tanto doesn’t do anything significantly better than a drop point or a clip point, and many things worse.

The Mini CQC-7 is chisel ground. The argument for the chisel grind is as follows: better strength, better edge retention, and it’s easier to sharpen. There have been long and articulate counterpoints made against these arguments, but for me it comes down to the simple fact that a chisel grind just cuts worse.

So much control is lost. Cuts track terribly through material. Approaching thin material like paper is a chore. I understand that some knives are made for hard use, and in these cases durability is more desirable than finesse, but here’s the thing: you can have both. The well-executed, traditional v-grind of the Paramilitary 2 can take a beating and slices like a dream.

Maybe, maybe, in the vacuum of theory, a chisel grind can withstand more abuse than a traditional V-grind, but I would bet it isn’t much more, and in what real-life scenario is it going to matter? And as far as sharpening goes: well, I guess it takes less time to sharpen one edge bevel than two, although you still need to maintain the unsharpened side of a chisel-ground knife, so you’re only saved a modicum of effort.

The steel on the Mini CQC-7 is 154CM. This is one of my favorite steels, and one I think can compete with N690Co for the title of Most Underrated Steel in the World. It is a solid upper-mid-tier steel that responds to sharpening as well as something like 8Cr13MoV, but holds an edge longer. No complaints about 154CM itself.

But the Mini CQC-7 costs about $165. As much as I’m sad to see the middle of the market drop out, one good thing that’s come from it is that we can expect a lot from knives in $150 – $200 price point. The Benchmade Valet costs $170 and has M390. The Zero Tolerance 0770 comes in Elmax for $120. You can get the Spyderco Mantra comes in M4 for $167. The Native 5 LW is half the price of the Mini CQC-7 and comes with S35VN.

This segment of the market is so competitive that I feel alright harping on the price a bit. Amidst such company, at such a price, 154CM is unacceptable – even more so when you consider that CPM-154, the powder metallurgy variant of 154CM, has been around for a while now. I think that, like the chisel grind and the tanto blade, EKI’s steel choice has been given a pass because of the historical significance of the brand and its blades, and the Mini CQC-7 suffers as a knife for it.

Handle, Ergonomics, and Carry

The Mini CQC-7’s handle is wonderful. The thickness of the knife and the swell in the middle of the handle work to make the Mini CQC-7 very comfortable in hand. The jimping is mild, really better for indexing than for locking your hand in place. The real grippiness comes from the G-10, which is very coarse without being overly aggressive like Cold Steel G-10. Superbly executed all around.

The clip is the same clip you see on almost every Emerson, and like the ergonomics it is an unqualified win. And, as thick as the knife is, I don’t mind it in the pocket. It stays out of the way and isn’t so bulky as to be noticeable when I’m walking around – again, showing how important distribution of weight is with pocket knives.

The Mini CQC-7 isn’t tapped for left hand carry. Emerson can tap it for you, but A) you have to get the knife from EKI or send it in, and B) it will cost you $25. There are a lot of knives with non-repositionable clips, even at this price point, but given how integral the wave opening is to the design of the Mini CQC-7 it should come drilled for righties and lefties out of the box. For reference, the Emerson/Kershaw collabs are all drilled for both.

Deployment and Lockup

The Mini CQC-7 can be deployed via two different methods: either by the thumb disk or by the Emerson wave opener.

The thumb disk works but is slow – pretty smooth, admittedly, but slow. It almost feels like the knife is pivoting between two layers of cloth. From what I understand the Nylatron washers here are another Emerson standby. I don’t mind them, and if they are supposedly lower-maintenance than phosphor bronze or Teflon washers then that’s fine. Just know that you’re never going to flick this knife open.

Of course, the way you’re supposed to deploy the Mini CQC-7 is with the wave opening feature. The wave is a small hook on the end of the thumb ramp that, when you pull the knife from your pocket, catches on your pants seam, opening the knife as you are retrieving it. It’s…fine, I guess? I’ve had multiple wave opening knives and I don’t really buy into the utility. I’m not good at it. I get a lot of misfires. It makes traditional retrieval a bit complicated; the wave will catch a lot of the time and half-open the knife; I’ve cut myself more than once because I pulled a half-open Mini CQC-7 out of my pocket.

It’s also not a ‘polite’ way of opening a knife around folks who may not be comfortable around edged tools. I wouldn’t fault it for that if it were a larger, more distinctly tactical knife, but even the Emerson literature implies that the Mini CQC-7 is something you can take with you anywhere. If subtlety or politeness is a concern, then you may find the wave opening method a little theatrical for the non-knife people around you.

The Mini CQC-7 has a titanium liner lock. It works. Like any lock made of titanium, I worry about wear over time, but the worst thing I can say for it over two years of ownership is that it doesn’t always lock up at the same point against the tang. If I deploy it hard it travels far across, but if I roll it slowly it just barely slides underneath. To be expected? Probably. I don’t recall noticing this happening on any steel liner lock knives I own, but regardless lockup is very good.

Emerson Mini CQC-7 Review – Final Thoughts

I’ve been hard on the Mini CQC-7. I want to stress that, in a vacuum, it’s a fine blade. But it doesn’t exist in a vacuum, and not even years of accreted Emerson mythology and reputation can save it from looking hopelessly out of step and overpriced in today’s market.

A Mini CQC-7 with CPM-154, a slimmer handle, a conventionally-ground drop point blade, and tapped for both left- and right-handed carry would be an interesting proposition at the price it’s being offered at.

But that isn’t the knife we have. We have the same blade, more or less, that Emerson was selling a decade ago, and probably the same blade they’ll be selling five years from now. I know that Ernie Emerson and his team are probably working on new designs instead of trying to update old ones, but if there were one in the lineup that deserves an update, it’s the CQC-7. This pioneering tactical knife has been left in the dust. I’d like to see it be at the vanguard again.

EMERSON MINI CQC-7 2.9 inch SATIN Plain

I recommend purchasing the Emerson Mini CQC-7 at Amazon or BladeHQ. Thanks for checking out the review.

Editor’s Note: This is a fairly critical review from Ben, but I think it is well reasoned and ultimately fair. The value proposition for knives like this Mini CQC-7 continues to shrink in light of all the advancements in the marketplace. Also, the price point of these Emersons are just painful. If this was a $100-120 knife, I think a lot of the CQC-7’s perceived shortcomings could be overlooked. Still, the CQC-7 remains a classic, and if you are curious about Emerson knives or can find a nice deal then I think this is a good place to start.

Benchmade 300-1 Axis Flipper Review

by Dan Jackson 6 Comments

Last Updated: August 2, 2019
The Benchmade 300 is a knife that I originally passed on reviewing. This wasn’t an easy decision. As Benchmade’s first flipper, this is an important knife. But initial reports said that the flipping action was weak, and the knife seemed chunky. I was turned off for those reasons. Rather than going through the motions of reviewing a knife that I did not want to review, I decided to focus my efforts elsewhere.

Buy the Benchmade 300 at BladeHQ

Buy on Amazon

I think it was a mistake to ignore the 300. In a sea of somewhat boring and predictable Benchmade offerings, this knife offered a glimpse of something different for the company; even if it’s simply hitching on to the flipper wagon.

As I review some of Benchmade’s 2016 models, I see a few more flippers in the mix. I can’t help but wonder how the 300 has informed these new flippers, and future knives for Benchmade. That is what really drew me to examine the 300.

General Dimensions and Blade Details

The 300 has an overall length of 7.36″, a 3.18″ blade, weighs 4.85 ounces, and is made in the U.S.A. Technically, my knife with the black and blue G-10 handle scales is referred to as the 300-1. The original 300 comes with sand colored peel-ply G-10 handle scales and satin hardware. Beyond the scales and hardware you have the same knife. I am going to refer to my 300-1 as simply a “300” throughout this review.

The 300 knife is designed by Butch Ball, a nice man that I had the pleasure of meeting at the 2015 Blade Show. The 300 is aimed at the Every Day Carry (EDC) market. It is on the large side for my style of daily carry, although it makes for a nice “nights and weekends” knife when I can dress a little more casually. I have used it in an EDC capacity, and can see how others might do the same.

The 300 features a wide clip point blade. This is a dramatic blade that juts from the handle with a pronounced thumb ramp, deep belly, and large flipper. The high flat grind and bright satin finish contrast sharply with the dark handle and black hardware. There is a thin swedge that terminates with a fine tip.

In practice the 300 proved itself to be a capable slicer. Although the blade stock is relatively thick, this is a wide blade, and the high flat grind gets thin behind the edge. Standard fare like cardboard, rope, and apples are easily cleaved by the 300. A deep belly and strong tip are hallmarks of clip point blades, and these features aid the 300 in food prep and penetrating cuts. This versatile blade shape is well rounded and the 300 should handle most EDC chores without complaint.

Benchmade decided on 154CM for the blade steel. Knife fans will already know that this is a proven stainless steel, although it is now considered a mid range steel. Personally, I remain a big fan of 154CM. It takes a beautiful edge, holds it well, and is easy to sharpen. Like all steels (even stainless steels) you will need to keep the knife clean to avoid corrosion, but if adequately maintained this is an excellent working steel ideally suited for daily use.

Handle, Ergonomics, and Pocket Clip

My 300 came with 3-d machined layered blue and black G10 handle scales over blackened stainless steel liners (again, technically this is considered the 300-1 in Benchmade’s catalog). The knife is held together with torx-head fasteners and 2 blackened stand offs. The 300 originally is offered in sand colored peel ply G10 with odd grooves cut into it. It was different, and I appreciate that, but it did not appeal to me. The blue/black G10 is a little more toned down, but it still offers the end user something besides a plain black handle. The steel liners have been skeletonized extensively. The fit and finish is excellent on my knife.

The entire knife looks wide and unwieldy, but it all makes sense in hand. There are a series of finger grooves, that I typically am not a huge fan of, but I was pleasantly surprised with how natural the 300 fit my fingers (I take a “large” glove for reference). The thumb ramp features 3 shallow notches (jimping) that more index your thumb than hold it in place. This is a stark contrast from the toothy jimping on the Griptilian.

The machined G10 handle scales offer traction, but the texture is not aggressive like peel ply G-10. The texture is similar to the handles of the Volli or the Bedlam. If you prefer the traction and feel of a peel ply G-10 handle, then check out the tan colored version of this knife.

In practice this is a comfortable work knife. It stayed in my hand and did not irritate me in use. The finger grooves actually worked here for my hand.

Benchmade chose a black parkerized deep carry pocket clip, and situated the 300 for ambidextrous tip up carry. I like the deep carry clip and clip placement. The 300 buries deep into the pocket and carries well considering this is a larger knife. And I do consider the 300 to be a larger knife. Despite having a sub 3.5″ blade it is still a wide and thick knife. For what it is, I think the 300 carries pretty well.

Deployment and Lockup

The big draw to the 300 is that it is Benchmade’s first flipper, and that this is an axis lock flipper. In a perfect world we would get exceptional flipping action combined with the safety and convenience of the axis lock.

I am here to report that this knife does not flip like a traditional liner lock or frame lock flipper. The axis lock simply does not provide enough resistance (or “detent strength” if you were to compare it to a traditional detent driven flipper) to provide snappy flipping action. However, my knife was not a total flipper fail. If you use a strong lightswitch flick it is possible to flip the knife completely open without using your wrist. It takes some practice, and doesn’t compare to a ball detent driven flipper, but the knife does flip open this way. On a “1 to 10” scale, I’d say this is a 3. It still flips better than my 3” XM-18 did, but this isn’t a Shirogorov by any means.

Benchmade wisely chose to include ambidextrous thumb studs on the 300. This is a more reliable means of opening the blade, and provides the user some options in how they want to manipulate their 300. The thumb studs deploy the blade as easily as a Griptilian or any other axis lock knife with thumb studs. And of course you can use the axis lock to flick the knife open as well.

Speaking of axis locks, the axis lock on my 300 is excellent. My knife is rock solid and devoid of any horizontal or vertical blade play. I remain a big fan of the axis lock because it is strong, easy to use, is fully ambidextrous, and you do not need to put your fingers in the path of the blade to close the knife.

Blade centering is near perfect on my 300.

Benchmade 300 Review – Final Thoughts

I am glad I finally bought a 300. This is an interesting and important knife for Benchmade, and I was pleasantly surprised by it. The big question is “How well does it flip?” I am here to confirm that the flipping action is nothing to write home about. It works, but requires practice and a strong index finger.

If we examine the other aspects of the 300 it reveals a thoughtful and well made knife. The fit and finish is good, the knife cuts well, the steel is good, the handle is comfortable, and the 300 carries decently given its size.

It’s a thick and larger knife, so don’t expect this to carry like a Valet, but for a sturdy working knife this fits the bill. If you are a fan of knives like the Rift, then I think you would appreciate the 300.

This is an interesting first attempt at an axis lock flipper from BM. I wouldn’t call it a home run, but I am glad I picked one up. I am curious to see how Benchmade’s new 2016 flippers stack up against the 300, and plan to review at least one of them in the not so distant future.

In closing, don’t buy the 300 if you are expecting a Zero Tolerance grade flipper with an axis lock. The flipping action is simply not up to par with a ZT. Buy the 300 if you are a Benchmade fan that likes larger EDC knives, and wants to try something a little different.

Benchmade - AXIS Flipper 300 Knife, Plain Drop-Point, Satin Finish, Sand Handle

HIGH-QUALITY: The 154CM stainless steel blade is tough, rust resistant, and holds an edge well. The G10 handle is durable, impervious to moisture, and stable under extreme temperatures, making it great for outdoor use.
WELL-DESIGNED: The AXIS Flipper 300 offers the speed and function of AXIS Assist, with the convenience of a flipper. The 300 can be opened and closed quickly and single-handedly.
COMFORTABLE: The 300's contoured handle is attractive and comfortable to use and hold. The reversible pocket clip offers ultimate accessibility.
VERSATILE: The AXIS Flipper 300's drop-point, utility blade style and all-around functionality make it ideal for everyday carry.

I recommend purchasing the Benchmade 300 at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Protech Runt J4 Review

by Grayson Parker 7 Comments

Last Updated: March 7, 2021
Over the last few years, pro-knife legislation in many states has contributed to a renewed interest in automatic knives. In part, these laws recognize the futility of banning automatic knives (also known as switchblades) when modern folders can be deployed just as quickly. The advent of the frame lock flipper begs the question: when manual knives can be reliably deployed at the same speed, but don’t require as many moving parts, is there still a justification for automatic knives? I argue that there is, but we’ll get to that later on.

Buy the Protech Runt at BladeHQ

Although several states have passed laws which legalize carrying automatic knives, others have not. My home state of California still bans the carry (but not ownership) of switchblades. However, the California penal code does not define automatic knives with blades less than two inches as switchblades, which has created a market for tiny automatics.

Apart from smoke shop specials, few manufacturers cater to this niche market. Benchmade and Microtech each have an offering, but I wasn’t impressed by either during my (admittedly brief) handling period. While I can’t speak for everyone’s taste, I can say that I’m glad I chose the Protech Runt J4. Pro-Tech has a robust selection of CA-legal autos. They are based in California, after all. They also have earned a reputation online for quality manufacturing practices.

General Dimensions and Blade Details

The Protech Runt J4 has a 1.94 inch blade, a closed length of 3.33 inches, an overall length of 5.27 inches, weighs just 2.1 ounces, and is made in the USA. I chose the spear point blade, although there is the option of a tanto, if you’re so inclined.

On this model, Protech uses 154CM blade steel, which is fairly typical choice along the Pacific coast. I’ve heard that 154CM was originally developed for the aerospace industry, and if so, some of its popularity in California would be partially explained. If anyone has more information, please leave it in the comments. 154CM is an excellent working steel: passably tough, stainless, with good edge retention and easy sharpening. Some may criticize it for its edge retention when compared to the new generation of super steels, but it has held its own (both on this knife and others) in my experience.

The blade is thinly ground, but the tip geometry is not as delicate as it appears. It is at least as tough as that of the Spyderco Dragonfly II. So long as you don’t drop it onto concrete, the blade should hold up fine. Between the thin stock and the high flat grind, the Runt is one of the best cutters I have owned. However the short blade makes certain tasks (among them slicing fruit – you only bite into an earwig in your apple once) slightly onerous, and some of the slicing potential is wasted on the short blade.

To date, rust has not been an issue, but others have had poor experiences with 154CM. The credit in this case should (in my opinion) go to the lustrous satin finish Protech put on the blade. Although the photographs don’t showcase it very well, this is one of the nicest finishes I’ve seen, and the satin finish on the main bevel is complemented by a high polish stonewash on the flats.

Handle, Ergonomics, and Carry

When this knife arrived, I assumed that the “fidget factor” of the knife would lie in deployment – that is, after all, the allure of an automatic knife. I was surprised to find that it was just as pleasant to the touch as my traditional knives. While it lacks the organic feel that micarta does, the aluminum (which has been hard anodized to the HAIII rating) is smooth and lustrous, akin to obsidian. The finish has held up well to riding next to a pen and a light, although it is fading at certain contact points. Rubbing against knurled titanium will have that effect, and I’m honestly surprised at how resilient the finish is. I’m certain that more of the coating will chip or wear away over time, but that isn’t the biggest concern for me. Much like the patina on a traditional knife or the fading on good jeans, this wear is a sign of use and adds a level of character that it would not have were it pristine.

In the hand, the knife is comfortable, but I would not suggest it for hard use, or cutting for long periods of time. While there is technically enough room on the handle for four fingers, this is meant to be a three finger knife. To Protech’s credit it is a well-executed grip, and despite the lack of jimping I’ve never worried about my fingers sliding onto the blade (or dropping it, for that matter). A lanyard hole would be a great addition and allow the knife to have a pseudo four finger grip. The edges have all been nicely chamfered, which gives the knife some of that “warm” feeling I often see attributed to custom knives, and is a contributing factor in stopping me from obsessively firing the Runt repeatedly as some do with flippers.

The one issue that I truly have with this knife is how it carries, and before you ask, it’s not because it is tip down only. Would I like to have the option? Yes, and I see no reason why Protech didn’t tap the other end of the handle to accommodate it. As I carry this knife next to a small flashlight, I don’t mind tip up, as it plays nicer with other stuff clipped to my pocket. I do not like the clip, however. The tension is unnecessarily stiff and the lip is too low to reasonably slide onto thicker cloth. And if you notice farther down, two of the clip screws (the ones on the outside were borrowed from another knife) needed to be replaced, as the originals stripped almost immediately.

Deployment and Lockup

Of course, the deployment is the main reason many folks consider an automatic knife. Whether they want to feel like Batman, need a knife that reliably deploys on command, or simply admire the mechanical ingenuity, let’s be honest: the thwack you get after pushing the button is addicting. The high polish on the button (which is both the deployment method and lock release) invites this sort of behavior, despite the nasty and/or frightened looks you may receive. After reading Anthony Sculimbrene’s review of the Protech Sprint (a newer, smaller model) wherein he noted that the small handle made it difficult to keep your grip on the knife when it deployed, I decided to go for the Runt instead, and I’m glad I did. The Runt fires louder and with more force than any automatic knife I’ve handled, which happens to be quite a few after a trip to a wonderfully seedy Las Vegas knife store. For some, this will be a real detriment. Not only does it draw attention to the knife, but you may lose your grip if you aren’t expecting it. After owning this knife for seven months or so, I’ve dropped it once for just that reason. In the Runt’s defense, I was absentmindedly firing it while doing some research, so that may be due to human error.

This was my first button lock, and I have no complaints. I can easily open and close the knife and the lock has zero blade play in any direction. Although there is no secondary lock or safety feature to prevent the knife from opening accidentally, I don’t think one is necessary here. Despite my initial concerns that the placement of the firing button/lock interface would lead to inadvertently releasing the lock (see the earlier grip shot), it was never an issue in realistic use. The plunger is deep enough that barring truly extraordinary circumstances, your index finger won’t come close to compromising the lock. The Runt has never fired in the pocket, and I was not able to induce the knife to open in such conditions.

I did have to apply Loctite to the pivot screw on mine, but when I did, I realized the screw was as thick as those on some of the “hard use” knives I’ve handled. Some folks might balk at the relatively complex internals of a button lock, but as the guys at the Knife Thursday podcast went over, having a lot of parts isn’t necessarily a bad thing. For example, on a framelock (or God help you, an integral) if the lock is somehow compromised and needs to be replaced, then the entire lock side of the knife needs to be replaced as well. On a button lock or an axis lock, parts will fail, but typically can be fixed without too much hassle, as the offending component is just one part of the mechanism.

Protech Runt J4 Review – Final Thoughts

Ultimately, if you are legally able to carry an automatic knife and are interested in doing so, I would recommend you first look at Protech. If my experience with the Runt and the hype on internet forums is representative of their capabilities, you won’t be disappointed. It’s not just good in the niche role of California legal automatics, it’s a great knife for everyday carry. This knife is impeccably finished, significantly nicer than its competition, and costs far less to boot. Keep in mind, the Runt is not without its problems. It can be a pain to carry it using the pocket clip. The deployment can require some getting used to, and its less people friendly than its size would indicate. However, if you’re looking for a classy knife that is equally at home on the job site and in a suit, this is an option worth exploring.

Protech Runt – From $105.00
From: BladeHQ

I recommend purchasing the Protech Runt at BladeHQ or possibly Amazon (as available). Thanks for reading.

Buck Marksman Review

by Dan Jackson 12 Comments

Last Updated: December 2, 2019
You may have noticed a lack of reviews of Buck knives. I have nothing against Buck. I reviewed the Vantage a couple years back, and haven’t gotten around to reviewing anything else because nothing else in their lineup interested me that much. That is, until I saw the Marksman.

Buy the Buck Marksman at BladeHQ

Buy on Amazon

The Marksman is a collaboration with Grant and Gavin Hawk. Grant and Gavin are known for pushing the envelope with unique designs and locking mechanisms. They have done a number of collaborations with Kershaw, Chris Reeve, and Zero Tolerance. I think it was especially cool that they teamed up with Buck, because Buck is so well known as a traditional brand, and Grant and Gavin are so well known for re-imagining the folding knife. It is an interesting juxtaposition, and it definitely got my attention. Toss in a 154CM blade, bearings, “made in the USA” quality, and a retail price of under $100, and I’m thinking there might be room for another Buck review on this website.

General Dimensions and Blade Details

The Marksman has an overall length of 8.25″, a 3.5″ blade, and weighs 4.3 ounces. This full size knife feels surprisingly lightweight thanks to the aluminum handle. I have mostly been using the Marksman for yard work and weekend chores, and it has made a great carry for those heavier duty applications. I have cut down bamboo, busted open zip ties, broken down boxes, and performed mild food prep. The Marksman cuts well and is lightweight and functional.

It’s the kind of user knife like the Benchmade Volli, Hogue EX04, and Cold Steel American Lawman, that manages to remain in my collection. For whatever reason, most of my fancier knives end up getting sold, but I have a hell of a time parting ways with a good user.

The blade shape of the Marksman is classic Buck drop point. It has the oval thumb hole that they seem to favor, and the design is mild mannered when compared to the handle. It’s also a functional blade shape with a sturdy tip and high hollow grind. The blade has been left with a matte finish which isn’t anything too spectacular. You can still see some rough grind lines and the finish will pick up scuffs and scratches. The laser etched logos on the blade also has shown signs of wear and have faded after the occasional application of Bar Keepers Friend (a metal cleaner). I photographed the knife after using it regularly for a couple months and you can see how the black laser etching has been scrubbed away. I consider this a “happy accident” as I’m a big fan of sterile blades.

Buck went with good ole 154 CM stainless steel heat treated by Paul Bos. The edge has held up well and the Marksman is a fantastic cutter. I have mentioned earlier how I have been using this knife pretty hard (for me at least) and I have been pleased with the performance. It keeps a good edge yet remains easy to sharpen. I have always been a fan of 154CM so I am not particularly surprised by my experience. I will say that I have had 154CM rust on me a little on more than one occasion, so you need to keep an eye on it, especially if you are going to use the knife for food prep and not clean it like I have on several occasions. If you don’t let the knife get too crusty, a little of that Bar Keepers Friend will bring it back to new.

Handle, Ergonomics, and Pocket Clip

The Marksman has a black anodized aluminum handle with a steel backspacer. This makes for a lightweight and strong handle. The anodization on the aluminum has held up well and there are grooves milled into the handle for a little texture and visual interest. The backspacer integrates with the strap lock (more on that below) so you have something of a “closed construction” design. While aluminum isn’t the most sexy of handle materials, it is very practical. I think it suits the design of this knife. Although it first appears as if there is a lot going on with this knife, at the end of the day construction is simple and sturdy. All the pieces have been nicely finished and the handle has been well executed.

The Marksman is a full size knife. Ergonomically it is straightforward and performs like you would expect. What impresses me most when I use the Marksman is how nice and light it feels in hand. I will say that the strap lock is uncomfortable to use repeatedly – at least until you build some callouses up on your hands. The serrations on the lock are no joke, and they tore up my thumb at first. Having used the knife for months now I don’t feel anything uncomfortable, but it took some getting used to.

Buck went with a deep carry reversible pocket clip mounted on the butt of the handle. This is a lot like the clip found on the LionSteel SR-1. The clip itself is simple and sturdy. It buries the knife discretely into the pocket. I like the clip and the way the Marksman carries. It’s worth mentioning that the knife is fully ambidextrous.

Here is your pocket clip shot:

Deployment and Lockup

Grant and Gavin really know how to shake things up in the deployment and lockup section. Sometimes I find myself starting to yawn when I put this part of the review together, but the Marksman really gives me something to talk about.

So you are probably already aware that the Marksman uses a “strap lock” to lock the blade in place. Chances are you have never encountered a strap lock on a knife before. It’s a big strip of stainless steel that runs the length of the back of the handle and snaps into place over a protrusion on the back of the blade. What makes it cool is that in the closed position, it serves as a big spring, and when you hit the flipper the knife launches open effortlessly.

Here is a size comparison with a Spyderco Delica and Spyderco Endura:

I have never been a huge fan of assisted openers, but the action on the Marksman is really cool and satisfying. It’s unlike any other spring assisted knife I have handled, to the point where I am reluctant to even identify it as an assisted opening knife. Closing the blade is kind of like setting a bear trap, and the trigger takes only a very light touch. It makes a very distinct tinny sound when you deploy it. Even my girlfriend could pick up on the fact that something was different with this knife. If the novel deployment system wasn’t enough, Buck also included a caged bearing system. The bearings work great and the action is so smooth that the blade just falls shut. This is a knife that you can easily open with the flipper or the thumb hole.

To disengage the blade you have to pull up on the strap with the serrations on the side of it. The serrations are rough and your thumb will get chewed up when you first start using the knife – especially if you obsessively open and close it like I did. The initial pain is definitely a negative, but overall I found the strap lock mechanism endearing, and like it more than I thought I would. With some practice you can learn how to open and close the knife one handed. It takes some tough thumbs and a little finesse but even this southpaw has managed to figure it out.

Another interesting aspect about the lock is that it is fully adjustable with a set screw on the pommel. I have used the knife for months and have opened it thousands of times. I have yet to notice any blade play, but if some were to develop you could tune it out with the set screw and pivot.

Here is a parting shot with my Spyderco Para 2:

Blade centering is perfect on my knife.

Buck Marksman Review – Final Thoughts

The novelty of the Marksman is what made me buy it. The thoughtful design, solid build quality, and excellent performance are what made me keep it. I would have never guessed that I would like the Marksman as much as I do. I wrote this review back in 2014, and as I update it in 2019, the Marksman is still part of my rotation. It’s a truly excellent knife. Perfect for those looking for a workhorse EDC that’s different.

The knife definitely has some novel features to it, and it doesn’t disappoint in that respect. But at the end of the day what impresses me most about the Marksman is that it’s actually a really good knife. The strap lock is unique, and I love how the blade deploys. The knife is also lightweight, tough, and functional. The materials are all high quality and it’s nicely put together – especially at the price point and considering that it is USA made. It carries well, cuts cleanly, and is a lot of fun to open and close. The Marksman has really grown on me. I would go so far as to say this is one of my favorite designs in 2014. I am glad I gave it a chance.

With all of that said I realize that this knife isn’t for everyone. The futuristic design is bound to polarize people, and the strap lock and it’s sharp edges could be a deal killer as well. But if you are in the market for something different and like a good user blade, then the Buck Marksman should definitely be on your radar. I liked it so much it earned a spot on my recommended EDC knives page.

Buck Knives 830 Marksman Folding Knife with One Hand Opening Action

RAZOR SHARP BLADE- 3-1/2" Drop Point 154CM Steel Blade delivers excellent edge retention, corrosion resistance, and is suitable for heavy cutting applications. Closed Length 4-3/4" Weight 4.0 oz.
AMBIDEXTROUS ONE HAND OPEN - Opens with the flick of a finger. The unique SLS Strong Lock System is one of the strongest locking mechanisms on the market. Once deployed, it offers the strength of a fixed blade knife
SAFE AND SECURE GRIP - The Black anodized aluminum handle provides a comfortable and secure grip while you work. This tactical knife will hold up in the most demanding situations
CONVENIENT CARRY - Includes a removable, reversible, tip-up discreet deep pocket carry clip for easy attachment to your belt, pocket, or in your bag
MADE IN THE USA - FOREVER WARRANTY - Since 1902 Buck Knives has offered a lifetime warranty on our knives because we believe in the integrity of our products. This knife is proudly made in the USA.

I recommend purchasing the Marksman at Amazon.com or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Emerson Roadhouse Review

by Dan Jackson 11 Comments

Last Updated: August 5, 2019
I’ve mentioned a couple times before that every now and then I get the urge to pick up an Emerson, and make it my EDC. I know the knife is going to be too large for me to comfortably carry, and way overboard when I stop to consider my actual needs for a daily carry knife. But still, like a moth to flame I convince myself that this time things will be different as I hit the “buy” button on yet another Emerson. This is probably like a gal that brings home the guy with bad credit and a pack a day habit, thinking that she will “change” him to one day become the man of her dreams.

Buy the Emerson Roadhouse at BladeHQ

Buy on Amazon

Well this time around I have no such delusions of grandeur. I bought the Emerson Roadhouse not because I intend to carry it in the pocket of my skinny jeans next to my mustache wax and Starbucks card, but because I really dig the design and wanted to add it to the collection. I know the knife is going to be too big for me to actually want to carry and use, and I could care less.

At least this time around I’m being honest with myself. This is a beastly blade and I have always been drawn to the low slung modified tanto design. Frankly, it’s about damn time I reviewed the Emerson Roadhouse and I’m not going to apologize for it.

General Dimensions and Blade Details

The Roadhouse has an overall length of 8.90″, a 3.80″ blade, and weighs 6.2 ounces. This is a full size folder and was likely designed with law enforcement and military personnel in mind. I’m just a guy with a website and a day job, so my perspective on the knife will be limited to daily carry and use as a tool, rather than a defensive option. The design has proven popular enough for Emerson to roll the Roadhouse out in a variety of sizes. We have the regular (shown here) the Super Roadhouse (4.2″ blade), and the Mini Roadhouse (3.4″ blade).

The blade of the Roadhouse is a modified tanto and is one of my favorite shapes from Ernie. I’m not a tanto guy, but I really like this modified tanto. There is a little belly and something of a harpoon and swedge that give the knife some extra attitude. In the product description Ernie tells you to think about Jack Daniels and Harley Davidson’s. I can almost see Patrick Swazye in a dusty corner, the glint of the Roadhouse flitting through thick cigarette smoke and half empty bottles. Oh yeah. I really like this one. Mine blade is a two tone satin finish with stonewashed flats. Like all my other Ermersons, this knife is ground beautifully with a v grind and chisel edge. The blades are the best part of these knives although I see a fair amount of tooling marks on the spine around the wave and jimping.

The steel is tried and true 154CM. If it works why mess with it? I certainly don’t have a problem with 154CM, and Emerson has always done a good job heat treating it. People who actually use their knives will tell you that the chisel edge is ground on the wrong side for right handed users, but I don’t let that get in the way of a good time or a cardboard box. I have found the 154CM to be a serviceable steel, but if you don’t believe me feel free to read through my handful of other Emerson reviews.

Handle, Ergonomics, and Pocket Clip

The Roadhouse’s handle is standard black peel ply G10 over a titanium locking liner, and a steel non-locking liner. My knife has a thick partial G10 backspacer. I am pretty sure if you were to buy one new Emerson now offers their knives with standoffs over a backspacer. We have been trained to think that flow through construction is better, but there is something endearing about the G10 backspacer. The hardware is Emerson’s signature phillips head fasteners for the body screws and oversized slotted pivot. There are some tooling marks on the edges of the liners, but beyond that everything is nicely finished.

In hand is where the Roadhouse really shines. This is a full size knife and it provides ample room for all your standard grips. In addition to being a long handle, it’s also quite thick. Much like every other Emerson I’ve handled the knife is extremely comfortable. The black G10 offers plenty of traction, and the jimping on the thumb ramp holds your thumb but isn’t overly aggressive. If you can get away with carrying a big knife it’s hard to beat Emerson’s offerings from an ergonomic standpoint.

For the same reasons the Roadhouse feels so good in hand, it will be noticed in the pocket. It’s a large knife and there is no getting around that. Even small Emersons have a way of feeling big. The Roadhouse has been outfitted with Emerson’s standard black parkerized clip. It rides low, but not so low that you can’t access it easily. This is a proven clip design and is very comparable to Benchmade’s offerings. As always the knife comes drilled and tapped for right side tip up carry only.

Deployment and Lockup

For deployment you have a choice of thumb disk or wave feature. I’ve never been a huge fan of thumb disks. They always seem awkward to me. But they are low profile and stay out of the way when you are waving the knife open. The nylatron washers aren’t amazingly smooth, but they get the job done. I’d prefer good ole phosphor bronze, but this isn’t Burger King. I can’t have it my way. I can flick open the Roadhouse with a little effort, but for rapid fail-safe deployment the wave is the way to go.

For lock up you have a thick titanium liner. The locking liner is visibly thicker than the non-locking steel liner and I find that reassuring. Lock up on my knife is early and secure. There is a little bit of lock stick, but nothing bad. I prefer a steel locking liner over titanium, but it is what it is. Apparently Emerson’s warranty service is good if you manage to wear down the titanium. I have never had to use their warranty service personally.

Emerson Roadhouse Review – Final Thoughts

It’s big, it’s bad, it’s surprisingly expensive. I have always enjoyed the look of the Roadhouse on paper and am happy to report the knife looks just as good in hand. It’s a solid tool, with Emerson’s signature quirks. Despite some tooling marks on the back of the blade and liners, the knife has been carefully put together. The parts line up, the blade is centered, the lock doesn’t stick (badly) and everything feels sturdy and secure. The super nice blade and comfortable handle are high points. The steep price tag and impracticality of the knife (for my suburban purposes) are low points. Regardless, I am pleased to add this one to my collection and recommend the knife if you are a fan of Emerson’s offerings or if the allure of the Roadhouse is just too strong to resist.

Emerson Roadhouse – $227.66
From: BladeHQ

Emerson Roadhouse SF Plain Stonewashed Blade

I recommend purchasing the Roadhouse at BladeHQ or Amazon. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Hogue EX04 Review

by Dan Jackson 5 Comments

Last Updated: August 4, 2019
It’s fun covering the latest knife trends. Case in point, the whole titanium flipper framelock schtick has has been an absolute blast. That said, I love it when a knife company completely bucks the trend and comes out with something that is bold, inventive and well executed.

Buy the EX-04 at BladeHQ

No products found.

Without spoiling the review for you, the Hogue EX04 is just that knife, and is one of the more interesting blades I’ve had the pleasure of handling in 2013. I must not be the only one who feels that way, as the EX04 won American-made knife of the year at the 2013 Blade Show.

Designed by world renown custom knifemaker Allen Elischewitz the EX04 marries an intriguing design with the same precision manufacturing and technical excellence that I gushed over when I penned my first Hogue review on the EX01. From the custom hardware down to the mirror polished edge, there is a lot to discuss with this knife, so lets get right into it.

General Dimensions and Blade Details

The EX04 comes in 2 sizes, the 3.5″ bladed version, shown here, and a version with a 4″ blade. My knife has an overall length of 8″ and weighs 4.48oz. I trend towards smaller knives for daily use, and found the 3.5″ version a good choice for urban EDC. That said, there is certainly enough knife here for use as a dedicated work or “tactical” knife.

The EX04 comes in 2 blade shapes, an upswept variant (shown here) and one with a modified wharncliffe blade. Both feature a unique double grind; a first for a production knife. I spoke with Allen Elischewitz about this personally, and he told me Hogue went to great lengths to consistently pull this unique blade geometry. I can’t say it does much functionally (although the knife is ground thin and cuts extremely well), but it is definitely a very cool detail that I really enjoy.

Hogue went with good ole 154CM which is an American stainless steel regular readers and knife aficionados should be well acquainted with. I have had a lot of good experience with 154CM, including Hogue’s 154CM when I reviewed the EX01 a while back. This time around I wanted to perform some more formal testing. The knife edge held up very well in performing a variety of EDC tasks including cutting rope, cardboard, and some basic carving. This is a useful blade shape made out of a nice balanced steel, and will provide years and years of service with very little maintenance.

Handle, Ergonomics, and Pocket Clip

The EX04 benefits from a full, sculpted G10 handle. There are no liners, although there are stainless steel bolsters that also function as washers. Like the rest of the knife the handle is superbly finished. The G10 is smooth and well contoured. The major hardware is silver and has been given a matte finish. Everything is just super refined on this knife – even the lanyard hole has been elegantly integrated.

From an ergonomic standpoint the EX04 continues to impress me. The simple sloping curves of the handle are also 3d contoured and lightly textured, which provides a good balance of comfort and grip. There is a distinct absence of jimping on the knife, which makes it very comfortable and practical for normal use. Mall ninjas will cringe at this obvious “oversight”, but as someone that actually likes to use his knife I assure you that the lack of jimping is actually a good thing.

The pocket clip is the same large spoon style offering found on the EX01. This time it has been given a durable black coating for a more discrete appearance. Some will probably find issue with the bulbous nature of the clip, but I think it’s practical and works well. The knife carries nicely in the pocket – it’s slim and lightweight and is the kind of I knife that I want to carry. If I were to give the clip a demerit, it would be for the right side tip up only carry. I understand that there may have been some design limitations requiring this clip placement, but for me tip up carry would have been preferable.

Lock and Deployment

The EX04 has ambidextrous thumb studs for deployment. They are easy to get at and the knife snaps open smoothly and crisply with little effort. An interesting feature of this knife is the absence of any kind of washer or bearing system. Instead, the blade mates up directly to stainless steel bolster plates that both reinforce the knife and serve as the “washers” for the blade to glide against. In practice this works very well, as evidenced by the very smooth and satisfying action.

As I mentioned in the intro, the EX04 makes use of a button lock to secure the blade. It’s a nice departure from the liner and frame locks that creep into many of my folding knife reviews, and Allen has gone to great lengths to ensure that the EX04 came with a robust and reliable lock. My lock occasionally sticks a little bit. I am not sure if I need to clean it, lubricate it, or break it in more, but I do experience a little stick in the button lock from time to time.

The knife also comes with an external safety switch that locks the knife open. On the EX01 I found that the safety was too easy to engage, and would inadvertently lock the knife open, but I was relieved to find that they have made the safety button much more purposeful. It doesn’t engage accidentally, and you really need to consciously push it to lock open the knife.

Hogue EX04 Review – Final Thoughts

The EX04 is a beautiful knife. I gave it a glowing review, and I think it’s well deserved. The knife has a unique design, has been flawlessly executed, and is very practical to carry and use. If I were to make suggestions, it would be to find a way to enable tip up carry.

Besides that, this is nothing short of an awesome knife, one that I find a true pleasure to have in both my collection and my pocket. It is a premium offering, and commands a premium price tag, but this is another one of those instances where you get what you pay for.

At the time of updating this review (end of 2015) the EX-04 remains one of my favorite 3.5″ folders. It’s a beautiful tool that speaks to me on a number of different levels. Highly recommended.

No products found.

I recommend purchasing the Hogue EX04 at Amazon or BladeHQ. Thanks for checking out the review!