Knives By Purpose

Cold Steel Hold Out II Review

Last Updated: August 23, 2019
Cold Steel has really been making a statement in 2011 with their new and improved lines of lightweight and ultra strong folders. Their updated series of Cold Steel Voyagers has really built up some buzz, and rightfully so. But keep in mind that the Cold Steel 2011 roster runs much deeper than that. Today I’d like to share another one of their light weight high value folders: the Holdout II.

Buy the Cold Steel Hold Out at BladeHQ

Buy on Amazon

General Dimensions and Blade Details

The Hold Out II sports a 4″ blade, has an overall length of 9″ and weighs 4.2 ounces. This folder could work as a large EDC or tactical folder. Cold Steel also makes a smaller version, the Hold Out III. This knife has a 3 inch blade and weighs a mere 2.5 ounces. This would make a really sturdy EDC option/emergency tactical.

The blade on the Hold Out II is 3.5mm thick and tapers into a nice fine tip. It’s a simple drop point design and has been given a full flat grind. Thanks to the offset tip there is a good amount of belly on this knife and the Hold Out works well for a variety of tasks. The edge is beautifully ground and out of the box sharpness on my knife was excellent.

Cold Steel selected AUS 8A for the blade material, a mid range stainless steel that they use on a lot of their folders. I like AUS 8 alright as it is easy to sharpen and it helps keep the cost down. That said, I often wonder if Cold Steel would consider upgrading to something like 154CM. It would add some cost but I’d love to see the option of slightly better steel for improved edge retention.

Handle, Ergonomics, and Pocket Clip

Modeled after Skean Dhu knives carried by ancient Scottish warriors, the Hold Out has a long and slender handle. The handle is a linerless design made of two thick pieces of G10 bolted into steel and aluminum backspacers. The G10 feels very solid and I can just barely flex the handles when pressing down hard on them. This is a strong and lightweight handle design that I can really appreciate – especially after lugging around some heavy folders.

Ergonomics on the Hold Out II are good. It’s a big handle so you have plenty of room to position your fingers in a variety of grips. The G10 is very rough and provides a lot of traction. There is a small choil and the knife has neither a hilt nor a thumb ramp. Fairly sharp jimping has been applied to the bottom of the handle and less aggressive jimping has been applied to the top. There is no lack of traction with this knife.

At first, the lack of a thumb ramp or really aggressive choils was seen as something of a negative. But I noticed that when you consider Cold Steel’s entire lineup of knives there are a ton of blades in Cold Steel’s catalog that have much more aggressive ergonomics. So instead of knocking the knife for this, I’m going to note that it’s simply different. I will say I love the look of this handle, and the overall look of the knife. It’s a sleek design. Crazy ergonomic features would definitely spoil the clean lines of this knife.

The pocket clip on the Hold Out II is excellent. This is a simple polished clip but it allows for ambidextrous tip up carry. It rides deep and provides a good amount of retention. I like the clip a lot.

Deployment and Lockup

Deployment of the Hold Out is accomplished through a large thumb stud. This thumb stud is not 100% ambidextrous, but it is reversible with a flat head driver. I need to first mention here that the Tri-ad lock requires a good amount of force to overcome the spring tension and get the knife open. With that in mind, at first I found the thumb stud to be kind of slick and it took quite a bit of effort to flick the knife open quickly.

As the lock broke in (and I got some practice) it became easier to open the knife. Today I can flick the blade open pretty much every time. I still think some improvements could be made to the thumb stud to catch your thumb a little better, but I was happy with the way the lock broke in and the knife ended up deploying.

The Hold Out II uses Cold Steel’s Tri-Ad lock, which is just a beast of a lock (and I discussed it in many of my previous Cold Steel reviews). In a nutshell, this is an improved back lock that is able to withstand a ton of force. I regard this as the strongest locking mechanism on the market. So naturally lock-up on this knife was rock solid with no blade play at all.

I noticed some reviews on Amazon where people were saying it was very hard to disengage the lock. It will take a little force, but as the lock breaks in it becomes much easier. Compared to my Cold Steel Spartan, this lock was a piece of cake.

Cold Steel Hold Out II Review – Final Thoughts

There is a lot to like about the Hold Out II. The gently sloping shape of the blade and handle has timeless appeal. I like the overall size and proportions and have no complaints with the strength of construction or the materials themselves. That said, I did find flicking the blade open to be difficult given the shape of the thumb studs and the powerful spring on the Tri-Ad lock. A version with upgraded blade steel would be really cool too (and I think it would sell well).

All in all, this is a solid offering from Cold Steel. For folks wanting something a little smaller I think the Hold Out III will be a very attractive option too. If you like rock solid folders, the Hold Out II is very deserving of your consideration.

Cold Steel 11HL Hold Out II Plain

Plain Edge
Blade Length: 4"
Handle 5" Long, G-10
Japanese AUS 8A Stainless
Overall length: 9"

I recommend purchasing the Cold Steel Hold Out at Amazon or BladeHQ. Thanks for reading.

Spyderco Dragonfly II Review

by Dan Jackson 21 Comments

Last Updated: March 29, 2020

Back in the day, I didn’t think I would like the Spyderco Dragonfly 2. I’m a big guy, and tend to carry medium size folding knives. I always felt that I would be under-equipped with a small knife. Maybe it’s a macho thing, I really don’t know. I like a good size knife. Something I can use comfortably.

Buy the Spyderco Dragonfly 2 at BladeHQ

No products found.

So the thought of packing a massive 5-7/16″ folding knife with me that weighs a whopping 1.2 ounces wasn’t super appealing. That is, until I got my hands on the Dragonfly II. It took me about 2 seconds to realize how badly I had underestimated this little knife. It punches well above its weight, and is one of the best EDC knives on the market. I originally wrote this review back in 2011, and I still carry and use my Dragonfly 2 to this day. This is a long term review that benefits from a decade of ownership. How many reviewers can say that? Let’s give this awesome EDC blade the full run down.

General Dimensions and Blade Details

The Spyderco Dragonfly 2 or “DF2″ has a 2-5/16″ blade, an overall length of 5-7/16” and a weight of just 1.2 ounces. You hear about knives that “disappear” into the pocket. This is one of them. I’ve literally forgotten I’ve had it in the pocket many times. It’s been few the wash a few times too. I love the Dragonfly 2 for Every Day Carry (EDC), it’s perfect for almost any kind of urban environment and it’s got a big enough blade (and more importantly, a comfortable enough handle) for most EDC tasks.

Here is a size comparison with the Delica and Endura:

You can see how the Dragonfly II is significantly smaller than both knives. Here’s a video review I did many years ago:

The DF2 comes with a beautiful little leaf shaped blade. The blade almost resembles a dart with its triangular shape. The small swedge running across the top softens the feel of the spine and the whole blade has been given a full flat grind. There is adequate belly and the tip is both fine and strong. This blade excels at opening mail and packages. My only gripe with the blade shape, is that it lacks a sharpening choil. A small notch at the end of the edge that allows you to easily sharpen the entire length of the edge. You don’t have a sharpening choil here, so it will be difficult to sharpen the heel of the blade with a flat stone. Instead I’d recommend a rod sharpener like the corner of a Spyderco Sharpmaker stone.

This knife was made in Japan and like many of Spyderco’s Japanese production knives this one features VG-10 blade steel. VG-10 is a good choice as it holds a good edge and is capable of getting extremely sharp. I say “good” choice, not great, because these days there are better blade steels out there. VG-10 was fine back when this knife was first released, but times have changed. Still, VG-10 is serviceable blade steel and it certainly still works. What I like about VG-10 is how easy it is to sharpen, and how it is resistant to rust and corrosion. Newer, more exotic steels will hold an edge longer, but VG-10 gets the job done. I think it’s fine here, but wouldn’t complain if Spyderco upgraded it to S35VN or something along those lines.

In practice, the Dragonfly 2 cuts well and is an imminently useful knife. I have used my knife for years and years. Mostly for pedestrian things like opening mail and packages, and light food prep. I’ve never prepared dinner with just my DF2, but the knife has no problem with tasks like cutting fruit and cheese. It’s a small blade, but it’s all you need for basic stuff. And it’s a nimble blade. I reach for it when I have a delicate task. The tip is fine, and the angled thumb ramp allows you to get great control over the blade. This knife is a workhorse and it cuts great.

Handle, Ergonomics and Pocket Clip

The handle on the Dragonfly is made of fiberglass reinforced nylon (FRN) and is covered in Spyderco’s bi-directional texturing. This is the same kind of texturing found on both the Delica and Endura and I find that it offers exceptional grip in both wet and dry situations. Unlike the Delica and Endura, the Dragonfly does not have stainless steel liners. That is not a problem for me because the handle feels plenty strong and it is a big part of the reason why this knife weighs so little. Fans of G10 and steel can rejoice because Spyderco also makes a G10 version. All in all handle construction is solid, I like that they used screws for easy take down and everything feels very well finished.

Ergonomics is where we really start to see this little knife shine. Most smaller blades suffer from poor ergonomics and get kicked out of my pocket pretty quickly. The Dragonfly has extremely refined ergonomics and squeezes big grip out of a small knife. First of all, you have a 50/50 choil and large thumb ramp. Both have been given a large amount of jimping. I am a huge fan of 50/50 choils, it really can transform the way a knife handles and what it’s done for the Dragonfly is no exception. But perhaps my favorite ergonomic feature is the way the back end of the handle has been shaped to support the pinky finger. This gives you a true 4 finger grip and allows for awesome leverage on the knife. In my mind, this little section of FRN is what really makes the Dragonfly work.

The pocket clip is another home run. This is a Spyderco wire clip and is perhaps my favorite pocket clip design of all time (really). Small, but very secure, this little piece of hardened steel gives you a deep and reliable carry. The handle has been designed to allows for ambidextrous tip up carry. My only suggestion would be to anodize it black like on my Sage 1 – then it would be virtually invisible riding in a pair of blue jeans or dress pants.

Here is your pocket clip shot:

Deployment and Lockup

The Dragonfly takes advantage of a 11 mm Spyder-hole. This is a good size for the knife and has been left kind of sharp, which ensures that you thumb will catch on it every time. Deployment is smooth and reliable and you can easily flick this knife open if you like. I have zero complaints with the deployment.

Lockup is achieved through a small lock-back positioned in the middle of the handle. I like the lock-back on this knife, it’s easy to get too and the spring isn’t too heavy. The lock-back makes this a fully ambidextrous knife as well (always a plus – especially when a lefty is writing the review). Lockup is rock solid on the FRN version, with zero play in any direction.

Here is a parting size comparison with a Benchmade Mini Griptilian and a Kershaw Skyline, two other all-star EDC knives:

Spyderco Dragonfly II Review – Final Thoughts

This has been the story of the little knife that could. I seriously have nothing bad to say about the Dragonfly. I am totally impressed by how well this thing works as an EDC blade. Since it weighs nothing I also like pairing this with a larger tactical folder; that way I always have the right tool for the job.

Perhaps the only downside is the price. With a price tag hovering in the $50 range, you are looking at Delica (and almost Endura) territory. Some might have a hard time justifying spending that kind of money on such a small knife, especially given the rest of Spyderco’s product line.

However, I love my Dragonfly II and it has remained one of my all time favorite EDC knives. It is hard to beat this small, lightweight package for daily carry. The knife is imminently useful when you need it, but disappears into your pocket. It has stood the test of time for me, and easily makes my best edc knives list. For fans of Spyderco and ultra lightweight EDC knives, the Dragonfly II is a no-brainer.

No products found.

If you would like to buy a Spyderco Dragonfly II, I recommend purchasing it at Amazon.com or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Cold Steel Bushman Review

by Dan Jackson 16 Comments

When I ordered a Cold Steel Bushman I wasn’t sure what to expect. My previous experiences with Cold Steel knives have all been good, but for under $20 I had no idea what I was in for.

Buy the Cold Steel Bushman at BladeHQ

Buy on Amazon

All I knew for sure was that the knife was popular and cheap, which, as a reviewer, made it an easy purchase to justify. I was pleasantly surprised with the quality, and having now owned and used the knife for a while I’m a little closer to understanding what this blade is all about.

Purpose

The Bushman is billed as a survival blade, and I think it’s capable of all the major tasks. First of all, it can chop and baton – no surprises there. It’s also lightweight and easy to carry, a big plus for me. It could also easily be fashioned into a makeshift spear, very valuable in a survival situation. Finally, the knife is tough as hell and is pretty much indestructible. So yeah, it could certainly work as a survival knife.

I also think this could be a decent choice for a bug out bag – especially one done on a budget. This could also be a handy tool for the yard, clearing brush and general messing around type jobs. Finally, this could be great for the cabin, truck or anywhere else you would want to stash an inexpensive but highly functional fixed blade knife.

General Dimensions and Blade Details

The Bushman comes in two flavors, the bowie blade shown here and a more traditional shape. Both are 12-1/4″ long, have 7″ blades and weigh around 10 ounces. These are slender and light knives, not designed to be serious choppers, but capable of chopping, batoning and being fashioned into spears. If I could go back and buy the knife again, I would have gone with the non-bowie version. I think it would be easier to baton with it and I might be able to choke up and control it a little better for detail work.

The blade has a hollow saber grind that starts about 3/4 of an inch up the blade. Cold Steel supplies you with a good out of box edge and the knife has a nice tip for piercing, that held up really well to some of my prying tests. I took this knife to the wood pile in my back yard and went to town chopping, batoning and carving. I processed wood for a couple fires and generally tested the knife the best I could. The blade is 2.5mm thick and has a large flat portion due to the saber grind. I found it batoned “ok” – it would jam easily in dense pieces of oak but could tackle dry pieces of 4-5″ diameter pine without a problem. For batoning in my back yard I would prefer a wider blade with a higher bevel, but the Bushman got the job done.

The entire knife is made from a single piece of SK-5 high carbon steel. My research indicates that SK-5 is close to 1080, a durable tool steel. Being a high carbon steel, the blade will rust (and my knife shipped with prodigious amounts of grease on the blade and handle) so Cold Steel elected to provide a black powder coating. The black powder coating is attractive and durable but began to show signs of wear – totally expected. Cold Steel tempered the knife to 54 HRC. The result is that you have an edge which is pretty soft but incredibly tough – excellent for hard chopping without chipping or breaking. I found that the edge held up quite and came back very easily with a couple swipes on my strop.

One thing I noticed is that I actually managed to bend the edge a little in testing. Again, we appear to be flirting with the limitations of a thin survival knife made from a softer steel. I don’t think this really hurts anything but is worth noting – I’d much rather see the steel bend a little than chip out or break.

Handle and Ergonomics

The Bushman’s handle is about as simple as they come; it’s a single piece of steel that has been folded into a tube and welded together. What I like about this handle is that you can really beat on it. I would often strike directly on the handle and pommel as I tried to drive the knife through larger logs. Cold Steel claims that the handle / blade transition is capable of withstanding 2000 pounds of force. You could hit this handle all day and it’s not going to break.

Another great benefit to this design is that it is very lightweight. Depending on what you like to carry this could potentially serve as a backup knife and is a good option for camping trips and day hikes. I also like how you can easily convert the knife into a spear. This is something I didn’t try out myself, but it seems easy enough to do.

As far as ergonomics go the handle is surprisingly comfortable. After working with the knife for an hour I didn’t notice any hot spots. However, the handle doesn’t provide much in the way of traction. If it’s a hot day and your hand is sweaty I highly advise using a lanyard as there is no texturing to speak of. Perhaps you could wrap the handle with some sort of athletic tape or paracord and add some texture. That said, I personally had no issues with slipping and I found the handle to fill the hand well and offer a decent grip considering.

Sheath

The sheath is almost as simple as the knife. It’s made of Cordura and reinforced with plastic sheeting, stitching and rivets. My biggest problem with the sheath is the absence of any means of retention. If you turn the sheathed knife upside down, the blade will fall out. In my mind really this is more of a “pocket” than a sheath. Speaking of pockets, there is a large pocket on the front of the sheath with a velcro flap – could be handy. I’d throw a small strop or stone in there and maybe a fire steel. The only mounting option is a belt loop. Honestly I think given the price the sheath works, but a retention strap would make it work so much better. It might jack the price up a little but I think it would be worth it.

Cold Steel Bushman Review – Final Thoughts

This is a sturdy offering from Cold Steel. This is a no frills knife, but for around $25 shipped, I doubt anyone would be disappointed with this simple and hearty blade.

In fact, there is a lot to like about the Cold Steel Bushman. It uses a good high carbon steel, is pretty much indestructible, doesn’t weigh much and takes a keen edge. The ability to easily convert the knife into a spear is also really cool. Add a retention strap to the sheath and you have a very capable survival knife that could be pressed into a variety of roles.

Cold Steel 201052 Bowie Bushman 95Bbuskz

Made of highest quality material
Manufacturer: Cold Steel
Cold Steel bowie bushman 95Bbuskz

I recommend purchasing the Cold Steel Bushman at Amazon or BladeHQ. Thanks for reading.

CRKT M16 Review

by Dan Jackson 24 Comments

Last Updated: July 16, 2018

My recent reviews of the CRKT Minimalist and the Drifter have proven that CRKT is legitimate contender in the affordable EDC game. But for many this is old news as knives like the popular CRKT M16 have been around for years delivering excellent every day performance at a price that can’t be ignored.

Buy the CRKT M16 at BladeHQ

Buy on Amazon

In fact, I’m no stranger to the M16. I owned one years ago (a small black tanto version) and for around $20 it provided me with years of trusty service. At one point I thought that I lost the knife, but several years later I found it in the pocket of one of my fishing bags. In between losing and finding my original M16, I picked up the one shown here – a medium size version with a spearpoint blade and flashy orange handle scales.

Purpose

This is a very popular knife from CRKT. Designed by Kit Carson, this blade comes in a variety of sizes suitable for EDC all the way up to Tactical applications. My old M16 was pretty small but I feel like the medium sized one straddles the EDC / tactical gap nicely with it’s 3.5 blade and 3.5 ounce carry weight.

General Dimensions and Blade Details

As I said before, the exact dimensions will vary slightly depending on the exact model you select. There are so many variations I’m not going to even bother trying to cover them all, instead focusing on materials, fit and finish, and other more general aspects of the knives. The exact model in my review is a M16-13ZER and it has a 3.5″ blade, an overall length of 8.25″ and a weight of 3.5 ounces. This is the middle of the road for the M16 series as CRKT makes versions that are both smaller and larger than the 13ZER.

My model came with a spear point blade, although you also have the option of a tanto. I like the spear point because it has a great tip and a decent amount of belly. It’s not really my first choice for EDC, as I do like having even more belly, but it will get the job done fine. The knife comes with a hollow grind and the option of serrations.

I found the edge on my knife to be very asymmetrical – it’s almost like the knife has a chisel grind. CRKT states that they grind the knives this way to avoid thinning the serrations. While it may look a little different, my knife came very sharp; shaving hair and zipping through paper without an issue.

CRKT has offered the M16 in a variety of different blade steels over the years. The knife pictured here comes in AUS4, which is a lower end version of AUS8 (there is less carbon in AUS 4 than AUS 8, and the amount of carbon impacts edge retention and ease of sharpening). Performance on this AUS 4 blade is nothing to write home about. As of 2015 it looks like CRKT is now offering this in AUS 8, which is fine for the price. AUS 8 is a hearty inexpensive steel that takes a good edge, has decent edge retention, is easy to sharpen, and is relatively stain resistant. I would suggest acquiring this knife in AUS 8 steel or better if possible.

Handle, Ergonomics and Pocket Clip

Depending on the knife your M16 may come in aluminum or even titanium scales. For most people (including the knife shown here) the scales are made of Zytel (plastic) over full stainless liners. I don’t mind the Zytel scales as they are comfortable and help keep the knife light. I really like the choice in colors, I thought the orange version was cool (and practical, being a highly visible color) and kind of gives the knife a “rescue blade” vibe. A series of holes in the handle forms a basic yet attractive pattern. These holes will attract dirt and pocket lint and in my mind serve a purely decorative purpose on the FRN scaled versions.

Ergonomics on my medium sized M16 are nice. The reason I like the medium sized version (the M16-13Z) is because it has a larger handle allowing for a full grip. The zytel scales give the knife some thickness and the corners are nicely rounded so it comfortably fills the hand. The spine of the blade has some fairly aggressive jimping and the flipper forms an integral guard that keeps your hand from slipping onto the blade. These are nice ergonomic features on an otherwise basic (but highly functional) handle.

I am a little ambivalent about the pocket clip. The design is nice – it’s a simple clip that rides low and has good retention, but it’s located for right side tip down carry only. At the very least I’d like to see an option for tip up carry – let alone fully ambidextrous mounting options. Still, this medium size M16 carries reasonably for its size.

Deployment and Lockup

Deployment of the M16 is absolutely stellar. The first time I deployed the blade I literally had to check if it was an assisted opening knife – it’s that smooth and fast. Upon closer inspection it looks like the M16 uses a teflon and phosphor bronze washer. Whatever it is, it works and I’m not complaining. Deployment is accomplished by way of a flipper. At first glance it looks like the knife has 2 large thumb studs, but these are actually stop pins mounted in the blade. They sit flush with the handle and cannot be easily activated with the thumb. This is fine as I happen to like flippers.

The M16 uses a liner lock and it bites in nice and early. There is plenty of room for wear and I detected zero blade play. However, this is not your normal liner lock. This lock has been equipped with CRKT’s Auto LAWKS safety system. The Auto LAWKS system requires you to pull back a lever before you can disengage the lock – handy for aggressive use, but also a source of mild inconvenience for simple tasks. In fact, I know that for a lot of people, the Auto LAWKS is pretty annoying. Personally, I can deal with it, but would much prefer if it wasn’t spring loaded – so you could turn it on and off at will.That said, if it really bothers you you could take the knife apart and remove the LAWKS all together.

CRKT M16 Review – Final Thoughts

So how does the M16 stack up? Well, I’m sure for many the tip down carry and Auto LAWKS will be mild to moderate turn offs. It is not that hard to use, and some people have managed to disable the secondary locking system. Auto LAWKS aside, this is a good budget EDC option. I would avoid any AUS 4 versions and recommend acquiring the knife in AUS 8 steel or better.

At the end of the day there is a lot to like about the M16. It is one of CRKT’s oldest and most popular designs. The snappy deployment is a lot of fun and the fit and finish is nice. There are many different colors, blade shapes, and configurations so there is some element of collect-ability here as well. All in all the knife is solid and the price is right. Recommended if you secure one in AUS 8 steel or better.

COLUMBIA RIVER KNIFE & TOOL M16-13Z EDC Folding Pocket Knife: Everyday Carry, Serrated Edge Blade, Automated Liner Safety, Nylon Handle, Pocket Clip

Safe And Secure: Automated liner safety provides extra layer of lock security
Cutting Power: Triple Point serrations cut fibrous materials with ease
Strong And Lightweight: Glass reinforced nylon handle is durable and lightweight
Designed by Kit Carson in Vine Grove, Kentucky
Versitile Use: Built tough for use around the house, in the garage or at the shop

I recommend buying the M16 at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Combative Edge SALUS Review

by Dan Jackson 8 Comments

Last Updated: September 18, 2019
I’ve said it before and I’ll say it again, one of my favorite parts of running this website is the excuse to check out sweet knives. I can try to do this under the pretense that I am offering the reader some noble service, and perhaps even some entertainment, but lets not kid ourselves here – it’s all about the blades!

Buy the Combative Edge SALUS at BladeHQ

Buy on Amazon

So when I got the chance to pick up a Combative Edge SALUS I didn’t waste any time. Limited to only 50 pieces, this thing epitomizes cool yet maintains a level of practicality that makes it work just as good as it looks. Regular readers will notice that this is a little outside the more “mainstream” knives I review. In fact, I’m sure quite a few people will be entirely unfamiliar with Combative Edge, as they are a relatively new boutique brand. Guys, I love to review these more exotic knives but it all comes down to money, time and availability… but with any luck this won’t be my last Combative Edge review.

I also want to mention that this knife was made for Combative Edge by Fox Knives of Maniago, Italy. I do not have a lot of experience with Fox Knives (or Italian knives in general) but due to the rising popularity of Italian blades I hope to remedy this quickly. I will say that my initial impressions of Italy’s cutlery capabilities are extremely favorable. This knife in particular is beautifully made and I will get more specific as we work through the review.

General Dimensions and Blade Details

The SALUS has a 5-7/8″ blade, an overall length of 10-7/8″ and a weight of 10.5 ounces. Considering that this is a full tang knife made from 5mm stock I think this is a lightweight and carry-able knife (that is, if you can carry a foot long fixed blade in the first place). The almost 6″ blade gives you plenty of cutting space and a good amount of reach, while the handle allows for a comfortable grip in a variety of positions. This is a very practical knife that can be used in tactical and survival applications.

The SALUS is made from a large piece of Bohler N690Co stainless steel. Admittedly, I do not have much experience with this steel. However, Sal Glesser, owner of Spyderco Knives, refers to N690Co as a “European VG-10”. Additional research has found that this steel has a tight grain structure and is capable of taking a very fine edge. Also, this steel is supposed to be highly resistant to corrosion. My understanding is that this N690Co takes some work to sharpen (much like VG-10) but is overall a very good steel.

The N690Co on the SALUS has been given a black Diamond Like Carbon (DLC) coating. For those unfamiliar with DLC coatings, this is the bonding of a carbon material that displays some of the properties of diamonds to the bladesteel. Unlike more typical decorative coatings, DLC coatings can actually increase resistance to wear and have many industrial applications. Naturally, depending on the manufacturer the formulation of the coating and other variables, you will experience different results with a DLC coating on the blade of a knife. While I have not hard used this knife I have noticed that the coating is very durable. I’m sure if you were to really gouge the steel it would leave a mark, but DLC is generally one of the toughest coatings out there and Fox did a great job with the SALUS.

The blade itself is a large American tanto shape with a drop point and swedge on the front half. The American tanto blade shape offers awesome penetration power. The 5mm thick blade tapers down at the very tip, but by and large this is a very stout blade. A flat grind has been applied about half way up the knife. I have no doubt that in a the SALUS could baton and perform other bushcraft/wilderness survival tasks.

Handle and Ergonomics

The SALUS features a highly textured G10 handle. These are 3-D machined handle scales and they feel awesome. It’s obvious that a lot of time has been spent getting the palm swell perfect and all of the lines are flush and wonderfully finished. The texture that was milled on is aggressive yet comfortable, which ensures a firm grip as the handle seems to melt into your hand.

In addition to the awesome scales, ergonomic features abound on the handle. There are two finger choils and two thumb ramps providing a ton of options for the user. You can choke up or pull back on the knife, in forward, reverse and every grip in between. I’ll tell you it’s really hard to write about this (so hopefully the video can fill in a little) but the way this has been executed is near perfect. The jimping is sharp and meaningful and the choils are well spaced. Everything works, and there are no compromises. It’s obvious a ton of time went into designing this handle. It’s an outstanding part of the knife that separates it from the pack.

Rounding out the handle is a large exposed pommel (for a “non lethal” option – I would NOT want to get cracked with this thing) and a couple lanyard holes.

Sheath and Carry Options

If the excellent steel, superb design and marvelously finished handle weren’t enough to distinguish the SALUS, take a look at the sheath. In some ways the sheath impressed me the most because it shows how far the guys at Combative Edge went to ensure this is a 100% high quality product.

The sheath itself is made of kydex and is mated to a removable cordura carry system with a series of 4 velcro straps. The kydex sheath is snug, with a very secure fit and a small drain hole at the bottom. If you want to run just the kydex sheath there are plenty of slots and holes for webbing and paracord. However, I think the cordura part of the sheath is a nice option and has been reinforced with plastic and extra stitching. The blade is further secured with a double snap strap that falls out of the way when open so you don’t inadvertently cut into your strap when drawing the blade. The sheath is Molle capable and includes two genuine Blade-Tech Molle locks with all the hardware.

Combative Edge also included two adjustable straps for use in a thigh rig. And just like everything else, this isn’t some cheap strapping. This is high quality nylon and one side has been given a rubberized no slip coating. A small amount of elastic ensures a secure and comfortable fit. Details like this really impress me and show the level of thought that went into even the more minor details.

At first glance, the sheath does not appear to be lefty friendly, but if you mess with the velcro straps you can carry this for left handed draw – admittedly it’s not as elegant as the right hand setup, but it does work.

Combative Edge SALUS – Final Thoughts

All in all I am very pleased with the SALUS. The design, the materials and the fit and finish are all top notch. Rob Walker and the crew at Combative Edge really thought this one out and executed a brilliant take on the modern combat knife.

The SALUS is typically made and sold in small quantities. As of 2013 CE is no longer offering the SALUS with a tanto blade shape. Instead, they have decided to offer the knife with a drop point blade instead. Limited quantities give the brand an even tighter “botique” feel and in my mind, further distinguishes Combative Edge from other offerings.

Combative Edge CBE00404 Salus Fixed Blade Knife

10 7/8 inch
5 7/8 inch blade length
Black textured G-10 handles

Editor: I recommend purchasing the Combative Edge SALUS from Amazon or BladeHQ. Thanks for reading.

Boker Plus S2 Review

by Dan Jackson 18 Comments

Last Updated: August 30, 2019
I’ve been drooling over Sniper Bladeworks custom knives for a long time now. For the uninitiated, Sniper Bladeworks is the brainchild of Lance Abernathy and Jody Muller. Jody handles fabrication and Lance comes up with the designs. The result has been a number of award winning tactical knife designs and superbly built tools that are revered by collectors and users alike.

Buy the Boker Plus S2 at BladeHQ

Buy on Amazon

The Boker S2 is Sniper Bladeworks’ first collaboration with a production company. I recently got my hands on one of these knives and was really impressed by how well the knife worked and the level of fit and finish. The intriguing design lead me to contacting Lance himself in order to gain some insight on this unique knife. Lance was able to provide some of the details and explain why the S2 was built the way it was. It was a real pleasure speaking with Lance, and I hope our conversation helps provide a better review.

General Dimensions and Blade Details

It should be no surprise that Sniper Bladeworks focuses on tactical knives. Lance comes from a heavy law enforcement background and served on a SWAT team for over 11 years. The Sniper Bladeworks custom knives are all built with utility, ergonomics and aesthetics in mind. The S2 is no different. This is a big knife so I would put it in the tactical and/or utility role. I think it’s big for EDC, but it doesn’t look that threatening so it could be a good choice if you like to carry a bigger knife.

The S2 has an overall length of 8-3/4″, a 4″ blade, weighs 5 ounces, and is made in China. This is not a small knife. By way of comparison, I find it holds it’s own next to a Spyderco Military (which also has a 4″ blade, but has a total length of 9 1/2″).

The blade is a big piece of 440C stainless steel. Boker uses a lot of 440C in their plus line and I welcome it with open arms. It’s a good mid-range steel and an all around performer. The width of the blade is impressive and it has a large flat grind that begins almost at the top of the knife. The long curved spine drops off into a nice functional tip. This tip isn’t reinforced and the overall bladeshape is faintly reminiscent of a sheepsfoot shape. Naturally there is a lot of utility with this blade for day to day tasks. I also think this could possibly serve as a rescue knife. And naturally I think the knife could also be used as an emergency defensive tool too. The excellent slicing capabilities of the flat grind mean you could use this knife for anything from cutting seatbelts to preparing food.

Finally, I wanted to comment on the stone wash Boker applied to this blade and hardware. It’s a rough and tumble stonewash and it has created a nice effect. Between the design and finishes of this knife, I get a really utilitarian vibe, and this knife just begs to be used.

Handle Details

The handle is one of the most interesting aspects of the S2. It’s construction is simple enough, with black G10 over matte gray steel liners. The liners have been milled to reduce weight and a black G10 backspacer runs a little over half the length of the handle. All in all, construction is good and all the pieces line up flush with no gaps or irregularities.

Ergonomics on the S2 are pretty special, and it’s where the knife really starts to shine. At first glance the handle is boxy looking and doesn’t appear to be that comfortable. I’ve heard some go so far to say that the handle is “ugly” – I disagree, but to each his own. I’ll say it’s a somewhat unconventional shape, but it really works in your hand. First off, it’s a pistol grip, meaning that the handle attaches to the blade at an angle and naturally orients the blade towards the cutting surface. Lance told me they like this style of handle because it puts the tip on target without bending the hand. In my experience, this design totally works.

The flat back of the handle fits the palm perfectly and your thumb falls into a nicely jimped thumb ramp. When I first picked up the knife I felt like this was a blade I could get some work done with. The flipper also acts and integral guard/choil so your whole hand wraps around the knife nicely. It’s a clever design and the guys at Sniper Bladeworks made the handle plenty big so you have lots of room to move and use various grips.

As a final touch there are some grooves milled into one side of the handle. This provides some extra grip to the already nicely textured G10 and adds some visual interest as well. Lance told me that they like designing knives that look good open and closed – the lines to add a little something extra.

The S2 actually ships with 2 pocket clips, for tip up or tip down carry. Its a good size clip that rides low in the pocket. Retention is good and I found it to be easy to insert into my pocket. Unfortunately the handle has been drilled for right hand carry only.

Deployment and Lock-up

The S2 is deployed by a large flipper on the back of the handle. This knife quickly broke in and I find that deploying this big blade is effortless. I think a flipper was a good idea for this wide blade because your thumb would have to travel far to fully activate a thumb stud. No complaints with the deployment of this knife.

Lockup is achieved through a liner lock. This is a pretty thick liner lock and it engages early with a crisp snapping sound. I found it to be easy to disengage, but because the handle isn’t cut away it does take a little more effort than other knives with a cutout for your thumb. I think for most tasks the liner lock will be more than adequate.

Boker S2 Review – Final Thoughts

All in all I am very pleased with my S2. To be honest, I can’t find a major fault with the knife (the lack of an ambidextrous pocket clip would be my biggest complaint). I think Boker was smart to pick up this cool design from Sniper Bladeworks. When I spoke with Lance he said that they wanted to create something big and functional – just like one of their custom pieces. I think Boker executed that concept wonderfully, as the fit and finish is very high on this knife, with the country of origin being China.

When you consider that the S2 can be acquired for around $50, it’s a pretty good value. I won’t be able to afford a custom anytime soon so this is the closest I will be getting to a real Sniper Bladeworks knife for a while.

Boker 01BO160 Plus S2 Knife with 4 in. Straight Edge Blade, Black

Durable and sharp 440C stainless steel blade
Structured G-10 scales for maximum stability
Reversible clip for tip-up or tip-down carry
Blade Length: 4 inches. Overall length: 8 3/4 inches
Limited lifetime warranty

I recommend purchasing the Boker S2 at Amazon.com and BladeHQ. Thanks for checking out the review.