High End Pocket Knives

Chris Reeve Knives Large Sebenza 21 Review

Last Updated: July 28, 2019
For many the Sebenza 21 is a knife obtained on the steep ascent to the upper echelons of production knife collecting. It’s not a starter knife. It is something to be gradually aspired to, pined over, and then climatically acquired.

I had such an experience when I bought and reviewed a small Sebenza 21 back in 2011. Although no stranger to nice knives at the time, it was one of my first forays into the $300+ knife category. And much like an exhausted mountaineer in awe of the view having reached the summit, I was suitably impressed with the CRK Small Sebenza.

Buy the CRK Sebenza at BladeHQ

In that space between 2011 and now I like to think I have matured in both my appreciation for knives as well as my approach to reviewing products. I also now have the budget to buy and hold more expensive offerings, like this Large Sebenza, and compare them with other expensive folding knives. I’ll spare you the essay on my “philosophy” towards reviewing knives, but the cliff notes are that I have no allegiance to any one brand. I run this website for fun, fund it independently (thanks in part to generous readers who purchase products through the links on this site – thank you for supporting my efforts and for supporting independent journalism), and have no problem telling it like it is. That also means I have no economic interest in selling you on a particular knife. My goal ultimate goal to assist you in finding the right knife.

The point of this is that my goal is to provide you with a review of the Sebenza 21 that benefits from my experience and lacks hype, gamesmanship, or “post purchase rationalization”. Sure, as an individual I will always have my own tastes and bias, but I try to point that out when I can to allow you to reach your own conclusion. That said, this is a damn fine knife, so lets get on with the review…

General Dimensions and Blade Details

The Large Sebenza has an overall length of 8.335″, has a 3.625″ blade, and weighs 4.7 ounces. As the name might suggest, this is a large folding knife and compares well in size to classics like the Strider SnG, Benchmade Griptilian, and Spyderco Paramilitary 2. I have to say that it irks me to no end when people refer to this as a “tactical knife”. It’s not. While I don’t doubt it could stab someone as well as anything else, in my mind it’s a large utility or EDC knife, and wasn’t designed with high speed/low drag operators in mind.

As an aside, it’s worth mentioning that my particular Large Sebenza is not your normal Large Sebenza. This one is from 2008 and is a special version of the knife with dual thumb studs (or thumb “lugs” as CRK calls them). It features S30V blade steel and lacks the “IDAHO MADE” moniker that, in my opinion, takes away from the appearance of the newer CRKs. So it’s a little different from what you would buy new today, but shares enough similarities for me to call this a review of the Large Sebenza 21 without hesitation.

The blade shape is a classic drop point, with CRK’s signature high hollow grind. The tip is extremely fine and the knife is ground thinly. One of my favorite details is the rounded spine. Overall, it’s a great shape for EDC, combining classic lines with precision manufacturing. The entire blade has been given a very fine tumbled finish, which looks nice and hides wear well.

Steel on my particular model is S30V, but these days the knife comes in S35VN. Both are fine steels. CRK seems to heat treat them on the softer side which is a decision by Chris Reeve that is not without its fair share of controversy. Personally, I like a relatively soft steel as it’s easier to sharpen. I’ve occasionally had a hard time putting great edges on S30V in the past, so if this blade Rockwells out to 58 RC rather than 60 then so be it. I will say that from the factory the knife comes laser sharp. It’s a high performance blade and it cuts very well. Compared to my SnG there really is no comparison, I would liken it more to the SJ-75, which has proven itself to be an excellent cutter. It slices beautifully and the edge polishes up easily on my strop.

Handle, Ergonomics, and Pocket Clip

For many, the luxurious full titanium handle is what the Sebenza is all about. The two slabs of titanium are simply adorned with a bead blasted finish, and, in this case, accented with silver hardware. The more standard version of the knife comes with blue anodizing on the thumb stud, and you can of course get the knife any number of unique graphic designs on the handle or exotic inlays. Personally, I really like my sterile silver and blasted knife.

Handle construction is simple but very well done. Chris Reeve made its name on tight tolerances, and my knife is no exception. Here you have flow through construction with a single stand off, and an interesting floating lanyard assembly. I’m not a big lanyard guy, but on this knife I decided to leave it on. There is something very traditional about the lanyard, and the unique floating lanyard pin makes it less obnoxious.

In hand you have a relatively comfortable handle. This knife doesn’t have anything in the way of 3-D machining, but all the edges have been contoured to break the handle up in your hand. The Large Sebenza is plenty big to accommodate all kinds of hands, and the jimping is near perfect in my book; there is enough texture to provide some traction without rendering the thumb ramp into a throbbing hot spot under harder use.

The pocket clip is another one of my favorite details of the knife. The “double dip clip” locks the knife in place like nothing else I own, and provides for discrete no-nonsense carry. Hands down this is a great pocket clip. The knife itself carries well for a large boxy knife. It’s reasonably slim, and the matte titanium tucks neatly into the pocket of my jeans.

Lockup and Deployment

When people talk about smoothness of a knife’s action “Sebenza Smooth” is about as high an accolade as you can offer in the production knife realm. At least, that’s how it was back in 2011. These days CRK has a little more competition with knives appearing on bearings and all, but it’s still a pretty smooth knife. Some guys like to disassemble their Sebenza and lap the washers with 2000+ grit wet sand paper to thin them down and further reduce the friction; kind of like how billionaires turbo charge their Ferraris. You have to be careful, because if you take off too much material you risk throwing off the tolerances entirely, but if you are one of those guys that can’t leave well enough alone then the option certainly exists. Most Sebenzas come with a single thumb lug, which, as a lefty, I really don’t like. I understand that they make a dedicated lefty model, but I would rather see double thumb lugs more common.

There is something eminently enjoyable about opening the blade on my Large Sebenza and feeling the lock fall into place with its soft and satisfying click. It’s almost like shutting the door on a German car. There is a level of security and refinement that I haven’t experienced with my other knives. This may be due in part to the relatively late lockup. Mine is around 90%. There is nothing to be concerned about with the late lockup, although I am sure some folks will find that aspect of the knife disappointing.

Something else to note is that there is absolutely no lock stick and no “break in” or tricks with magic markers are required. The Sebenza is designed to be simple, smooth, and dead nuts reliable. It can be taken completely apart with a single tool.

Large Sebenza 21 Review – Final Thoughts

The Sebenza 21 is a great knife and a worthy target for those ascending the ladder of production folders. BladeHQ did an excellent series of videos on the Chris Reeve factory. If you haven’t already seen them, they should give you further appreciation for these deceptively simple knives. Chris and his team have spent decades refining the tool and the processes behind it, and the end result is a high performance knife built to exacting tolerances.

With all of that said, there is an increasing amount of expensive knives competing for our dollar. High end production knives from larger companies like Zero Tolerance and Spyderco are continuing to gain ground, while an explosion of mid tech and custom offerings from boutique manufacturers dip down into Sebenza range. Chris Reeve spent decades building his reputation the hard way, attending knife shows and working with traditional media, but the age of Youtube, USN and Instagram is upon us. This new media is bringing consumers closer to the bespoke brands, and allowing young upstarts to accelerate on higher demand and wider margins. Whereas even in 2011 a titanium framelock alone would be enough to push the bleeding edge, today flippers, bearing systems, exotic steel, and 3-D machining are what grab at the attention of the increasingly savvy consumer.

Still CRK continues to do very well, and I don’t doubt that success will continue for a long time. The Large Sebenza is a great example of this, as it is both great knife and modern a classic. I think it’s worth having in any higher end collection. It’s the knife for guys that want a no-frills, highly functional tool. CRK gets so much right, it’s hard to find fault with the Large Sebenza. But in the midst of a golden era of mid tech knives, I can’t help but wonder whether the Sebenza will continue to be regarded as the peak of the mountain, or serve more as a stepping stone into the great white north…

Large Sebenza 21 – From $410.00
From: BladeHQ

I recommend purchasing the Large Sebenza at BladeHQ or KnifeArt. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Strider SJ-75 Review

by Dan Jackson 5 Comments

I have come to really enjoy my Strider SnG. Perhaps its because I won it in a contest, and therefore, had no qualms about carrying and beating the crap out of it. Regardless, it is a knife I have really enjoyed. But honestly, if my money was on the table, I’m really not sure the SNG would have been the first Strider in my collection. I have enjoyed the classic Strider look, but something really spoke to me about the refined lines and deep hollow grind of the SJ-75, and I always thought it would be my first Strider. Oddly, it’s my third, purchased after experiencing both the SnG and the PT. But under different circumstances it probably wouldn’t have been that way, and I think in the eyes of many collectors I’m not alone.

Strider really created something different with the SJ-75, and it merits further consideration…

General Dimensions and Blade Details

The SJ-75 has an overall length of 7.125″, sports a 3″ blade, and weighs 3.8 ounces. Strider describes this as the bridge in their lineup between the SnG and PT, but I’d say it’s more akin to the SnG than anything. The knife is definitely more compact than the SnG, but the cutting edge is pretty much the same length. It can make for a nice EDC and compares favorably in length to my Sage 1, which as you may be aware is my self-described “perfect EDC.”

The leaf shaped blade of the SJ-75 features a very prominent slanting hollow grind. It’s a neat look and an interesting departure from the flat chunky grinds found on both my PT and SnG. Apparently, some of the very first SJ-75’s were hand ground by Mick Strider himself. I bought my knife used, so I have no idea if it has been hand ground (or even what steel the blade is), but I am a big fan of the deep lean grind and the lustrous satin/tumbled finish that the entire blade has been given. I will say that I am not as crazy about the decorative file work that has been applied to the spine of the knife. I think the filework looks busy, and is something I would have left out if it were my design.

Steel choices seem to range on this model from 154CM to S35VN. There may be other offerings in the mix, special editions and whatnot, but tried and true 154CM and S35VN make up the majority. This is a good thing, as I like both blade steels, and Strider’s heat treats have proven themselves capable many times over. Again, I don’t really know what blade steel my particular knife has, but it’s stainless, holds a nice edge, and sharpens easily enough. Beyond that I really don’t care.

I ran my SJ-75 through the usual battery of tests and it performed really well. My SnG and PT, while fun knives to carry and admire, aren’t particularly keen slicers. The SJ-75 on the other hand positively zips through materials. I crunched cord, carved cardboard, and worked my way through several pieces of wood. The deep hollow grind is a significant improvement over the blocky flat grinds of my other Strider knives. And at the end of the day I was able to restore my edge with a few licks on a loaded strop. This, my friends, is how a $400 knife should cut.

Handle, Ergonomics, and Pocket Clip

The handle of the SJ-75 is an angular affair of G10 and titanium. Compared to my SnG, it looks like they took the fit and finish up a notch. It shares the same hardware, but the the edges have all been nicely chamfered, the lock bar is precision cut, and the handle pieces are suspended between a pivot and a single spacer; the ultimate flow through design. Again you find the filework on the back of the handle slabs, which is something I could live without. Aside from that I’ve got no complaints with the handle.

The G10 and titanium are both smooth. There is fine lined texture on the TI while the layers on the G10 show side exhibit depth like a piece of wood. The result is a handle that is visually interesting without being uncomfortable and obnoxious. The handle slabs have been “CC’d” to melt in the palm, and the absence of atrocious jimping, is noted and appreciated. This is a stout knife, but there is plenty of room even in larger hands for 4 fingers, and the humpback handle rests comfortable in the crook of your palm.

The pocket clip is classic Strider, and has been lifted off their other models. It’s right side tip up carry only, and the combination of a single screw and and slotted handle keeps it firmly in place. This isn’t the ultimate deep carry pocketknife, but they mounted the clip about as deep as they could. There is just enough poking out to easily grab the knife, yet it remains reasonably discrete and very secure.

Deployment and Lockup

For deployment you have Strider’s ubiquitous oval thumb hole, and it’s positioned high on the handle for easy access. The knife isn’t as smooth and easy to open as my SnG, maybe due to the tighter tolerances or lighter blade, but the knife still opens purposefully with the brush of a thumb. Strider went for large phosphor washers giving the knife smooth and purposeful action. They are only going to get smoother as the knife continues to break in.

The 3-D machined titanium is deceptively thick, and makes for a substantial frame and lockbar. My knife locks up around 40% and it is extremely tight. There is not even a hint of play in any direction and no stick whatsoever. Strider has had plenty of chances to refine their titanium framelocks, and the result here is highly refined.

Strider SJ-75 Review – Final Thoughts

The SJ-75 may very well be the Strider for guys who don’t like Striders. Compared to the overbuilt SnG and SMF, the SJ is practically a gentleman’s folder. What is impressive to me is the high level of fit and finish. Strider, much like Emerson, has earned a reputation of creating knives that are slightly imperfect users, but this is a knife that is extremely well made and meticulously finished. The reasonable size and weight and a practical grind means this is arguably their best EDC offering yet.

If I could change anything I’d do something about the file work on the inside of the handles and on the spine of the blade. Sometimes less is more, and I think now would be one of those times. Aside from that it’s a great knife, provided, of course, you can overcome the $400.00 price tag. Whether you want an upscale EDC or something for the collection, the SJ-75 is worthy of your attention.

Strider SJ-75 – From $400.00
From: BladeHQ

I recommend purchasing the Strider SJ-75 at BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Strider PT Review

by Dan Jackson Leave a Comment

Last Updated: August 3, 2019
One of the best parts of blogging about knives is checking out other people’s blogs, and seeing what they really like. It often piques my interest and expands my collection into all sorts of unhealthy directions. Case in point, I had absolutely zero interest in the Strider PT until I read Tony’s post on it. Boom. It instantly elevated the knife up to “want” status and several weeks later I had the PT you see before you resting comfortably in my pocket.

Buy the Strider PT at BladeHQ

As usual, Tony did a great job reviewing the PT with a catchy intro weaving artfully into background info on the knife and of course leading into his famous (infamous?) 20 point scale. I won’t even pretend like I’m that sophisticated. I’ll just babble on in my usual, loosely organized fashion, and ultimately try to determine whether the PT meets my approval as highly as Tony’s did.

General Dimensions and Pocket Clip

The PT has an overall length of 6.5″, sports a 2.75′ blade, and weighs in at a paltry 2.3 ounces. Compared to it’s bigger brethren, the SnG and SMF, the PT is very much a true daily carry knife, and was designed with fans of small pocketable knives in mind. The PT falls into the pocket with hardly a whisper and rolls around with my keys and flashlight just like a $20 Swiss Army Knife might.

The blade is Strider’s iconic drop point, complete with oval thumb hole and well spaced jimping. The blade is flat ground but still has plenty of meat behind the edge. It will open letters and cut boxes, just don’t expect it to peel away translucent thin pieces of cheese like a true gentleman’s folder. The grind of the PT leans towards hard use, just like it’s bigger brothers.

My particular PT came in S30V blade steel, and features a gently stonewashed with an even edge bevel. I find the S30V relatively stubborn to work with, but I am still able to keep a decent edge on it. Despite the knife being well, a Strider, I opted not to super hard use instead relegating it mainly to cardboard and kitchen tasks> These are more of my normal EDC tasks for a knife of this size rather than a back yard beat down. It performed adequately in all the tasks I put it up to, although I wasn’t blown away by the performance of this blade. As I alluded to before, the grind on this knife is fairly chunky, and like my full size SnG, isn’t the best slicer in my knife drawer. The trade off of course is that you have a much stronger edge.

Handle, Ergonomics and Pocket Clip

The handle is classic Strider. You have an integral G10 backspacer and display scale, a titanium frame lock, and a proprietary pivot. Despite Strider’s notoriety for subpar fit and finish, my PT came superbly finished. Every aspect of the handle, from the tumbled titanium down to the lanyard hole, has been delightfully well done. So no fit and finish gripes here. It looks to me like Strider has listened to customer feedback and tightened up their tolerances. All of my Strider knives are well made and my PT is a wonderful collector’s grade piece.

It is also worth noting that this is the concealed carry (CC) version, meaning the handles have been convexed for a thinner, lighter, more discrete knife. Compare the CC PT with my traditional (aka “lego”) styled SnG below to see what I mean.

Despite being a small knife, the PT boasts very solid ergos. It’s unique handle shape and elongated dual finger choils make for a comfortable 4 fingered grip, even with larger hands. There is a rough run of jimping on the spine. It is not a big deal on a light use sub 3 ounce folder like this, but it does provide plenty of traction for opening clamshell casings and other harder tasks.

The pocket clip section is moot as there is no pocket clip on the PT CC. I know some will have a problem with this, but I don’t mind the clipless PT as I usually carry an Alox Cadet this way. I will say the toughest part about carrying this $300 knife clipless is dropping it into the lint filled abyss to have it rattle and roll with keys and spare change. While my classic SnG with tiger striped blade seems to only look nicer with wear, I find scratches harder to ignore with this this stonewashed clean shaven look.

I will say that the regular Strider PT comes with a clip.

Deployment and Lockup

The PT makes use of a thumb hole for blade deployment. The “thumbstuds” are external stop pins, and don’t work well for opening the knife. True to the knife’s meticulous fit and finish, I find the action on my PT nice and stiff. This is after months of opening and closings. Perhaps “purposeful” is the better way to describe the PT’s action, as I like stiff opening. The sturdy detent sucks the blade down with a satisfying click, not unlike the way the doors fall shut on a German car.

Lockup is accomplished by the titanium frame lock. There have been issues in the past with Strider lock ups, and the PT wasn’t spared in that controversy. My understanding is that Strider has gone to great lengths to address this issue in all their knives. My PT is the most recent generation of the knife, and it locks up early, sturdy, and without play in any direction. The lock release can be a little difficult to access. Given the stiff action and small lockbar, it’s more of a two hand closer in my book. I will say that everything feels is very secure.

Strider PT Review – Final Thoughts

The Strider PT is a lovely little knife. It is beautifully made, boasts classic Strider lines, and is small enough to carry in a suit pocket. This Strider is perfect for a paper-pusher like myself, but is tough enough to stand up to some real use.

I like the knife for what it is, small, well crafted, and unique. Some may not like it for what it isn’t. And one things it isn’t is a cheap knife. Retailing at $300 (if you can even find one) the PT isn’t for the light of wallet, and like most of my high end knife reviews, probably begs some discussion of value. I’ll spare you that lecture. Only you can decide for yourself whether the PT is “worth” the premium price tag.

I’m happy with mine but confess that 9 times out of 10 I still reach for my trusty Alox Cadet when I need a slim workhorse pocket knife to bump around with my car keys and flash light. But, the PT appeals to me on more than just a practical level and I do enjoy it. For that reason I don’t see it leaving my collection any time soon.

Strider PT – $300.00
From:BladeHQ KnifeArt

I recommend purchasing the Strider PT at BladeHQ or KnifeArt. Please keep in mind that purchasing anything through any of the links on this website helps support BladeReviews, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Strider SnG Review

by Dan Jackson 15 Comments

Last Updated: February 13, 2018
For many knife collectors the Strider SnG is a holy grail of sorts. Much like the Chris Reeve Sebenza, the Strider SnG represents the top of the line for production grade folders. Toss in a Hinderer XM, and you have what many knife collectors like to call “the holy trinity” of high end production blades.

Buy the Strider SnG at BladeHQ

I am by no means an authority on Strider, but if you are unfamiliar with the brand Strider was founded some time in the mid 90’s by custom knifemakers Mick Strider and Duane Dwyer. The company is headquartered in San Marcos, California, and their designs draw heavily from the strong military background at Strider. They make a number of fixed blade and folding designs, and have fulfilled contracts for the U.S. Military in the past.

Strider knives aren’t cheap, but the company has built a reputation on quality and has gained an extremely loyal following. I have always found the bold lines of their folders intriguing, and the rugged nature of the knives further piqued my interest. The SnG is their mid size folder, resting comfortably between the large SMF and the small PT.

General Dimensions and Blade Details

The SnG has an overall length of 8.25 inches, a 3.5 inch blade, and a weight of 4.4 ounces. The SnG could work well as a larger EDC, or as more of a large utility / tactical (self defense) knife. I will say that I was surprised at how lightweight the knife felt. With the SnG’s reputation as a hard use blade I expected some sort of folding brick to show up in my mailbox. Instead, I was pleasantly surprised with how manageable the knife felt. It quickly found its way into my pocket.

The blade on the SnG is a modified drop point design. My particular SnG happens to be flat ground, but I have seen hollow ground blades and tanto versions as well. Of course there are custom versions of the knife in every grind imaginable. Blade thickness on this knife is just over 4mm thick (.165″) and tapers down to a stout tip. Despite being a near full flat grind the SnG is quite thick behind the edge, and I found the cutting performance underwhelming. This is surprising considering the $400 price tag (intuitively, I would somehow expect the knives to cut better as the price went up), but when you consider the hard use nature of the blade it does make sense – this knife is designed to stand up to more than just cutting. The signature Strider tiger stripes are a result of a black oxide coating that has been partially sandblasted off. The tiger stripes are optional, but it’s a unique feature that is distinctively Strider.

Blade steel on this particular model is S30V. S30V is interesting because it was formulated specifically for knives, and is something of a collaboration between Chris Reeve and Crucible. S30V is a proven steel, and my experience with the steel has generally been very favorable. S30V sharpens without too much trouble, holds a nice edge, and is resistant to rust and corrosion. Strider’s heat treat for S30V was originally formulated by Paul Bos, an innovator in the world of heat treating who is perhaps best known for his in-house work with Buck (Strider used to collaborate heavily with Buck). Again, the thick geometry of the blade didn’t make this the most exceptional cutter, but S30V got the job done whether it was rope, cardboard, or wood.

Handle, Ergonomics, and Pocket Clip

The handles of the SnG are special because they feature a one-piece G10 scale and backspacer mated to a titanium integral lock. You do get a choice of color with the SNG (green, black, and brown are standard – various other colors are occasionally available), and Strider also offers them in concealed carry and Gunnar grip configurations as well. What is shown here is their standard “lego” style handle with brown G10 and a flamed titanium locking side. Everything is nicely cut out, well finished, and perfectly mated together. Oddly enough, what really impressed me about the handle of the SNG is the hardware. The body is held together with over-sized black domed screws, and the pivot is an equally beefy proprietary piece. However, I did notice one issue with the handle. The blade partially blocks the lanyard hole. C’est la vie if you want a Strider SnG.

From an ergonomics standpoint the SnG is a good size knife packed with features. I had plenty of room to maneuver my larger hand around this knife, and it accommodates a good number of grips. In the traction department the SnG is loaded down with jimping on both the spine and pommel for a secure hold in both forward and reverse grips. This is great if you plan on putting the SnG into a more “tactical” role, but I found the jimping extremely uncomfortable under hard cutting. Plan to wear gloves if you want to seriously test the SnG. The forward finger choil is great for choking up and does give you some versatility under use. All in all I found the SnG reasonably comfortable for a folding knife, but it’s not my first choice for sustained cutting.

Strider includes a removable right side tip-up carry pocket clip on every SnG. The clip is made of titanium, features good retention, and slips in and out of the pocket with relative ease. It’s a nice secure clip – a must when you are toting around a $400 folder. I’m sure many southpaws would prefer a reversible clip as lefty SNGs are quite rare and expensive.

All in all, I found that the SnG carried really well. The pocket clip doesn’t carry the knife very deep, but the knife itself is slim and feels light for its size. While it isn’t my first choice for school or the office, I do not mind having this as my primary EDC, and didn’t find it overly bulky or uncomfortable in the pocket.

Deployment and Lockup

The SnG uses an oval thumb hole for deployment. The thumbhole is easy to get at and the knife opens fast and smooth. It’s not a knife that flies open, but with a little wrist action I can get it done. Inside there are two bronze washers surrounding that massive pivot. The action is smooth and very pleasant. There are what appears to be thumb studs on the blade, but they are actually stop pins and don’t work super well as thumb studs. The ball detent on this knife is very good and it’s fun to watch the blade get “sucked in” upon closing.

Lockup is of course established via a beefy titanium framelock. This particular knife is a 9th generation SnG, and benefits from newly redesigned flat cut lock geometry. I have heard stories about Striders developing blade play, but this knife has held up really well. I have a very slight amount of side to side play, and no up and down. I’d tune up the pivot, but it requires a proprietary wrench that I haven’t acquired yet (really, it should come standard at this price). Lockup is pretty early and the titanium lock bar doesn’t stick at all. It’s also worth mentioning there is a small Hinderer lockbar stabilizer on the handle to prevent over extension of the lock.

Strider SnG – Final Thoughts

For many knife collectors the SnG will be something of a final destination in their knife collecting journey. It is an iconic American hard use folder with bold lines, contrasting finishes, and that kind of rough and tumble bravado that pairs well with a low slung Harley Davidson, a strong cigar, and several fingers of really good bourbon. I can totally see the appeal, and it’s been a lot of fun carrying, using, and admiring this really sweet folding knife.

However, I gotta be real here for a moment. If you are looking at knives from a purely practical perspective the SnG is functionally no better than something like a Spyderco Paramilitary 2. It’s not going to cut any better, the lock isn’t going to be any stronger, and it won’t feel any better in hand. But that’s ok, this is the nature of a luxury good. My $40 Casio keeps better time than a $5,000 Rolex – but I’ll be damned if I don’t own a Submariner one day. You buy a knife like this because you want it, and have a few extra dollars to spare.

That said, as a collector and an enthusiast I do think you get something more with the Strider. The G10 backspacer seamlessly integrated with the handle scale, the beefy custom hardware, the flamed titanium lockbar – these are a few details that make the SnG stand out in a crowd. You get something unique, tough, capable, and strangely refined. The only issue I could spot was the partially blocked lanyard hole – besides that this is a really meticulously executed knife. When it comes to titanium framelock hard use folders the guys at Strider know how to do it right, and the quality, materials, fit, finish, warranty, and U.S. manufacturing are all there. Simply said, it’s a great knife.

So if you want to buy an SnG, I say buy an SnG. I don’t think it’s perfect, and it’s definitely a luxury item, but at the end of the day it’s a really nice knife. While it may be the first Strider in my collection, I guarantee it wont be the last.

Strider SnG – $400
From: BladeHQ

I recommend purchasing the Strider SnG at BladeHQ. Please consider that buying anything through any of the links on this website (including Amazon) helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Chris Reeve Knives Umnumzaan Review

by Dan Jackson 6 Comments

Last Updated: July 28, 2019
The ink had barely dried on my Small Sebenza review. I was sitting peaceably at my desk and distinctly remember saying how it would be a good while before I got my hands on another Chris Reeve knife. Shockingly enough it was only a couple weeks before the sweet Siren that is Chris Reeve Knives beckoned me back. Well, lets be real. The only thing that was really shocked by this purchase was my back account.

Buy the CRK Umumzaan at BladeHQ

This time around I picked up a CRK Umnumzaan (or “Umnum” for short). Right off the bat I could tell this was something special. Much like the small Sebenza the Umnumzaan was so attractive because of its simplicity. And in many ways the Umnum is even more simple than the Sebenza. But each piece is so carefully considered that the simple shapes belie an incredibly detailed design. It’s a really interesting knife, so lets dive on in and take a closer look.

General Dimensions and Blade Details

The Umnumzaan sports a 3.675″ blade, has an overall length of 8.445″ and weighs 5 ounces. This is a larger knife, suited for utility work or perhaps as an emergency defensive tool. I think most people will use the knife as an EDC item. On paper 5 ounces may seem kind of heavy, but in my hand the knife feels light for its size.

This Umnumzaan comes with a tanto blade shape. This was actually a special limited run of the knife that is completely sold out. The Umnumzaan traditionally has a drop point blade. Truth be told, I’m a bigger fan of the drop point version, but I couldn’t resist this unique tanto shape. The tanto shape is very powerful looking and quite aggressive with the hollow grind, swedge, and wonderful flat ground tip.

Speaking of grinds, everything has been ground with laser-like precision. I can spend hours staring at the blade alone, it’s really very satisfying. The blade stock is 3.56mm thick and the edge of the tanto version has a slight amount of belly. The blade on my Umnum has been given a nice stonewash. This is a beautiful finish that doesn’t show wear as easily as other finishes and will resist rust.

The steel on this particular Umnumzaan is CPM S30V which has been hardened to 58-59 RC. In 2011 CRK started to make these knives in S35VN. This is supposed to be an improvement over the original S30V, but I have no experience with it and there has been some controversy as to whether S35VN truly is superior. Apparently CRK worked closely with Crucible (the manufacturer of both S30V and S35VN) to develop this steel. I would expect S35VN to perform as well as S30V, if not better. Knowing CRK, they didn’t take the switch from S30V to S35VN lightly. Once I’ve had more experience with the steel I can provide my thoughts. I will say that S30V is excellent stuff, so if you snag an older version of the knife expect it to perform very well.

Handle, Ergonomics and Pocket Clip

The handle of the Umnumzaan is simple, but it is wonderfully refined and beautifully finished. CRK started with two slabs of 3.8mm thick 6AL4V titanium. There is a single stand off (pillar) near the pommel, so the knife is held together only at 2 places (at the standoff and at the pivot screw). The edges of the handle have been wonderfully rounded and contoured. A lanyard hole has been sunk into the back of the handle and on my knife a leather lanyard has been threaded through. All the stainless steel hardware has been polished to a bright sheen and the titanium scales have been sandblasted, which is attractive but will quickly pick up small scratches (unavoidable given the material).

Ergonomics on the Umnum are also very nice. The handle easily accommodates my larger hands. An attractive pattern has been milled into both sides of the handle. This provides both visual interest and extra grip. However, the bare titanium itself is also fairly grippy. It’s obviously not rough like G10, but definitely resists slipping. Additionally, there is nice, totally functional jimping on the spine of the blade and there is even something of a choil. I have no problem at all with the ergonomics on this knife.

The pocket clip is the legendary CRK “double dip clip” which is so good it’s almost beyond description. When you insert the knife into your pocket, the first dip is quite sturdy. However, once it reaches the second dip, the knife is totally locked in place. The best part is, the knife is still very easy to insert and withdraw from the pocket. Simply put, this is a big improvement over a standard clip. I happen to think that this is the best pocket clip currently on the market.

Deployment and Lockup

The Umnumzaan has dual thumb studs. These studs also double as the stop pin in both open and closed positions. The thumb stud is only useful for deployment from the right hand, but the left hand stud is too close to the lock bar to work as an opening mechanism. As a southpaw I was a little disappointed by this, but I understand that this was necessary if the thumb studs are to double as an integral stop pin.

However, I did notice that the nub that CRK refers to as glassbreaker can be used to open the knife left handed. If you push on this glassbreaker, it opens the knife enough so you can access the thumb stud and full engage the knife. It’s a less than perfect solution, but in a less than perfect world I’m totally willing to accept it – especially since CRK also makes a dedicated left hand version of the Umnumzaan.

As for the deployment itself, the Umnum moves with a feeling of purpose. The action is exceptionally smooth and the blade locks into place with a soft yet satisfying “click.” I like the deployment a lot. The knife features phosphor bronze washers that have been perforated and loaded with fluorinated grease to reduce friction.

I also want to discuss the pivot on this knife, which is quite unique. This is a very thick pivot screw, and it has a special 4 hole bolt pattern that requires a special tool to unscrew it. Thankfully CRK sends you all the tools needed to take this knife apart along with detailed full color instructions. This is great because most companies really don’t want you to take apart your knife. In some cases it will void your warranty. I like how CRK acknowledges and encourages the responsible disassembly of your knife. In my mind this shows how much CRK stands behind their products.

As far as lockup goes, the Umnumzaan makes use of a modified framelock. I say “modified” because the frame of the knife doesn’t actually come in contact with the tang. Instead, a ceramic ball has been inset into the face of the lock bar. This ball is what comes in contact with the tang, not the titanium frame itself. This ball also doubles as your blade detent. This is great because now you don’t need to worry about the titanium on your lack bar wearing out. Lockup on my knife is excellent with no blade play at all.

Disengaging the lock is also worth talking about. The handle is shaped in a way so that there is a slight lip on the lock bar, so you can easily catch the bar with your thumb and disengage the knife. This lip doubles as the choil. The blade slides into the closed position with another soft “click.”

Chris Reeve Knives Umnumzaan Review – Final Thoughts

The CRK Umnumzaan is just an absolutely fantastic knife. There is no way around it. The materials are all top notch, the fit and finish is incredible, the design is absurdly well thought out, and the overall style of the knife is just super super cool. At $425 new it definitely isn’t cheap, but I do feel like you are getting something for the price premium.

I tried to touch on some of the extra details that make this knife special, but there is only so much I can do in a ~1,500 word review or a 10 minute video. Let me just restate how precise this knife has been engineered. Every day of Chris’s 20+ year knifemaking career shows with this knife – absolutely no stone has gone unturned here. I am impressed with the Umnumzaan and recommend it if you like the knife and can get around the price tag.

Chris Reeve Knives Umnumzaan – $425
from: BladeHQ

I recommend purchasing the Umnumzaan at BladeHQ or KnifeArt. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Chris Reeve Knives Small Sebenza 21 Review

by Dan Jackson 23 Comments

Last Updated: June 2, 2019
I don’t think many people get into the hobby of collecting knives with the idea that one day they will buy a pocket knife that costs hundreds of dollars.

Well, at least I didn’t start out my little edged adventure with the thought of purchasing a $300+ knife. However, as I wandered down the rabbit hole, and became further consumed by my blade obsession, justification for more expensive knives became easier to find. Any reservations I once had about owning a $350 knife soon went out the window.

Buy the CRK Sebenza at BladeHQ

So that takes us here. You and me, about to discuss the Small Sebenza 21 made by Chris Reeve Knives (CRK) which retails for right around $350. In many ways this review is a challenge because for such an expensive knife, a lot of people have already given their opinion on it. It’s a very well known blade with an extremely loyal following.

But hey, it’s just a knife so I’m just going to treat it like I would any other, and try to provide you with a fair and honest review…

General Dimensions and Blade Details

The small Sebenza 21 is the little brother to the large Sebenza 21 (no surprises there, right?). This knife has an overall length of 6.9″ a 2.94″ blade and a weight of exactly 3 ounces. This is a great size for EDC and that is exactly what this knife was designed for – to be a high end edc knife.

The blade is a classic drop point shape. The knife has been given a high hollow grind (a very shallow one) and the spine has been rounded, a very elegant touch. Blade stock is 1/8″ thick, which is nice and stout for a smaller blade like this. The blade manages to maintain this thickness well, eventually tapering down to a sturdy point. Being a classic drop point there is plenty of belly for your EDC tasks, and the entire blade has been given a nice durable stonewashed finish.

Blade steel on my Sebenza is the tried and true S30V. If you are already reading a Sebenza review I think an in-depth discussion of S30V is probably unnecessary, but suffice it to say that this is a very fine steel with excellent all-around properties including good edge retention and corrosion resistance. However, my Sebenza was made in 2009. As of mid-2011 Chris Reeve has started making Sebenzas in S35VN, a slightly upgraded version of S30V. This is certainly a welcomed addition, and it’s great to see how CRK continues to refine and upgrade their knives.

Handle, Ergonomics and Pocket Clip

One of the great draws to this knife is that the handle slabs have been made entirely from titanium. Indeed there are two thick pieces of 6Al4V titanium here and they have been given a nice sandblasted finish. This finish will show wear, and I see some very light scratches on mine, but if you wanted to you could have the handles sandblasted again for a factory fresh finish. As far as construction goes, this is a minimalistic free-flowing design, and everything has been bolted together for easy take down.

That said, if you want to get fancy, CRK can give you fancy, and this knife is available with a lot of interesting hardwood and micarta inlays. CRK also offers these knives with a huge variety of different graphics engraved into the handle. This adds an additional layer of collectability to the knives.

There is nothing too complicated with the ergonomics of this knife either. But again, the handle just works. There is a nice thumb ramp with good functional jimping and a very shallow choil is also present. For a smaller handle it fits me pretty well; I’m able to get a 4 finger grip without any trouble and I can easily control the blade.

The pocket clip is pretty special. First of all, it is made of titanium and secures with a single bolt. It’s a very secure fit so I’m not complaining. More importantly this clip works – and it works very well. It has a kind of double retention system, which in a way acts like two pocket clips at once (a “double-dip” clip? Just came up with that one…). It’s difficult to describe so take a look at the pictures (and video) to get a better idea of what I am talking about, but in short it makes for a very secure fit into your pocket and a nice comfortable carry.

Lockup and Deployment

The Sebenza uses either single or dual thumb studs for deployment. My particular model has a single thumb stud (or thumb “lug” as they like to call them in the Sebenza circles) set up for right hand deployment. CRK does in fact make versions with double thumb studs and they even make an entirely left handed version of the knife. My thumb stud came with blue anodizing, and while the blue anodizing provides a striking contrast, it does wear off with use. Kind of a bummer, but what can you do.

Deployment is slow, smooth and extremely purposeful. This is not a knife that you can flick out easily, nor would you want to for fear of compromising the titanium framelock. The smoothness of the deployment is near legendary, and it’s not uncommon for people to compare the deployment of everything else to the Sebenza.

The Sebenza features a Chris Reeve Integral lock – or a “frame lock” if you prefer. This was the frame lock that started them all, as Chris Reeve designed the lock for this knife. An exercise in absolute minimalism, the lock is part of the handle and it engages with a very satisfying and forceful “click.” To me this kind of lock oozes strength and security and lockup is very strong.

Now, I need to say there have been a report or two that this lock has occasionally failed under spine whacks, but to be honest (and as respectful as I possibly can), I don’t really care. (I was never into “spine whacking” and certainly wouldn’t subject that to a little EDC knife. I think for cutting tasks this lock is going to be plenty strong for pretty much everything you would put it up to.

Chris Reeve Knives Small Sebenza 21: Final Thoughts

The small Sebenza is an excellent all-around edc knife. Hand made in the USA, this is the ultimate combination of an intelligent design, premium materials, and American craftsmanship. The Sebenza oozes quality and is an incredibly simple design done right. It is no wonder that most consider the CRK Sebenza the pinnacle of production pocket knives.

Perhaps the 900 lb gorilla in the room is the question, “is it worth the money?” Well, I think so, but then again I run a website entirely dedicated to cutlery, so perhaps I’m the wrong guy to ask. But really though, I hate answering this question.

Sure, you could just as easily carry a knife for a fraction of the cost. Lets face it, you don’t need a Sebenza to cut up a card board box, just like people don’t need a Ferrari to go from point A to point B, or a Rolex to tell the time – they buy these items because they want the best. In my mind this is a much cheaper thrill than a Rolex or a Ferrari so if you are someone who only wants the best, or someone who appreciates fine craftsmanship, or someone who has simply reached that point in your knife obsession where you have no where else to turn, then I think you will enjoy a small Sebenza.

Chris Reeve Knives Small Sebenza 21 – $350
from: BladeHQ

I recommend buying the Sebenza at BladeHQ or KnifeArt. If you purchase anything through any of the links on this website, I earn a small commission (at absolutely no additional cost to you) that helps keep the site running. Any support is greatly appreciated. Thank you very much.