Spyderco

Spyderco Domino Review

Last Updated: August 4, 2019
The Spyderco Domino is a knife that I almost wasn’t going to review. I’ve been following the Titanium Framelock Flipper Arms Race closely ever since the ZT 0560 took the production knife market by storm. Like pretty much everyone else, I’ve enjoyed these knives, but felt some initial hesitance to the Domino for some reason. I talk about this in my video, but I feel like the knife was almost too easy for Spyderco. After all, it parrots many of their already successful designs only this time we have a flipper, framelock, and bearings.

Buy the Spyderco Domino at BladeHQ

Buy on Amazon

Obviously I caved and bought the knife, and I am actually very happy I did. The Domino is a stellar performer and at a sub $200 price point I also think it’s a pretty decent value. Where else are you going to find the impressive feature set of the Domino, with a level of fit and finish that few companies can rival, with all the creature comforts of a Spyderco, for less than $200?

General Dimensions and Blade Details

The Domino comes in with an overall length of 7.68″, a 3.13″ blade, and weighs 4.1 ounces. The knife is a decent size for EDC. It’s a little larger and heavier than my Sage 1 (the quintessential EDC knife), but it still pockets well and makes for a reasonable daily carry.

The blade is a classic Spyderco leaf shape, and includes a full flat grind, a very fine tip, and a slight curving belly. It’s everything you need for an EDC blade. The 3mm thick stock is ground thin and the knife slices well. Although I must say that I find the wide blade is a little precarious tasks like carving apples, a task I often relegate to my trusty Victorinox Alox Cadet. Still, it will slice and dice with the best of them and I find it a good match to common tasks like opening letters and breaking down boxes.

Spyderco selected CTS-XHP steel for the Domino. CTS-XHP is made in America by Carpenter, and is supposed to be formulated with cutlery in mind. In practice I think it’s a good steel. It combines moderate edge retention with an ease of sharpening that I find lacking in steels like S30V. I had no issues with chipping or corrosion, and the steel took very well to both my strop and Spyderco stones. For those interested in extreme edge retention, I must confess that I found the steel a little lacking, but I am one of those people who prefers easy sharpening to ultimate edge retention so I wasn’t disappointed. I discuss this in greater detail in my video review.

Handle, Ergonomics, and Pocket Clip

The handle of the Domino sports a faux carbon fiber scale over a titanium liner with a titanium frame lock. You also get flow-through construction, a sleeved lanyard hole, and a steel lockbar insert that doubles as a lockbar stabilizer. My biggest beef with the knife has to be the ridiculous handle scale. I suppose Spyderco wanted to step it up a bit with an unusual handle appearance, but I could have done without the Domino patterned carbon fiber. Ruminating on this further, I think the knife would have been even nicer if they went for a full titanium handle rather than the carbon fiber (which is really just a thin veneer of carbon fiber over black G10 anyway). Some may appreciate this “unique” handle material, but I think the after-market knife modifier crowd will be in business for a very long time if companies continue to release knives with such blatantly distasteful handle materials.

The ergonomics of the Domino are good. This is what you would expect from a mid-size Spyderco. The bulbous handle fills the palm, while the double choils give you plenty of options for finger placement. There is a mild run of jimping on the spine of the blade that provides a little feedback without being overly aggressive, making the knife acceptable for extending cutting while still appealing to the TNP and mall ninja crowds. Although every folding knife handle is a study in compromise, I still found the knife reasonable to use in hard cutting situations like 1/2″ rope cuts and carving into bamboo.

The pocket clip of the Domino is sturdy and functional, although it won’t win any beauty contests. Spyderco selected a standard hour-glass clip and gave it a lustrous black chrome finish. It definitely beats a satin finished clip, while the chromed finish gives it a little depth and character. The handle is drilled and tapped for 4 corner carry, and the knife doesn’t ride too deep in any of the positions. On these more expensive knives I tend to like a knife with a one or two position clip over a knife with tons of holes in it, but functionally speaking there is no reason to complain. This knife itself is relatively thin and light and isn’t too obtrusive in the pocket. While the pocket clip and carry isn’t anything outstanding, the knife will certainly be able to get from A to B without issue.

Deployment and Lockup

Of course the Domino features a flipper, after all, that’s probably why you are interested in the knife. I am very pleased to report that the knife flips phenomenally. The detent is so well tuned that the blade practically explodes out of the handle when you press down on the flipper tab. I am very happy Spyderco took the time to ensure this aspect of the knife was squared away, as the action alone makes the knife worth the price. The over-sized pivot and caged bearing system certainly doesn’t hurt the performance either, and the knife is very fluid even when using the thumb hole.

For lockup you have a very nice stonewashed titanium framelock that includes a steel lockbar insert. In theory this steel insert should prolong the lifespan of the lock, and if things ever wore out you could (again, theoretically) replace the insert. In practice the knife is rock solid, without even a suggestion of blade play in any direction. Much like the other titanium framelocks I have seen come out of Spyderco’s Taichung factory, they got the geometry right and the lockup is worry free.

The steel insert also performs double duty as an overtravel-stop mechanism (sometimes called a “lockbar stabilizer”). This prevents you from hyper-extending the titanium when disengaging the lock. I’ve never had this problem, it’s a nice touch and aesthetically it doesn’t detract from the knife.

Spyderco Domino Review – Final Thoughts

In conclusion, the Domino is one hell of a knife. Here we have classic Spyderco fare like a thumb hole, 4-corner pocket clip, and good ergonomics coupled with the latest crazes in modern knifemaking. That alone should be reason enough to give this one a try, but I am very happy to report that they really executed this right. As I mentioned alone, for a flipper aficionado the action alone will be worth the price of admission, and Spyderco has once again turned out a very high quality product from Taichung Taiwan.

Of course an obvious comparison would be with their previous flipper, the Southard, and it’s worth taking a second to differentiate the knives. First of all, the action on the Domino is vastly superior to the Southard. The detent on the Southard is acceptable, but it is weak in comparison to the crisp action in the Domino. Also, the design of Southard may be a little “out there” for classic Spyderco fans. Personally, I find the Southard to be a far more interesting knife, but to each their own. I am sure the Domino will appeal to traditional Spyderco fans.

Of course I do have a few issues with the knife, and I might as well re-cap them now. Mainly I wish they went a different route with their handle scale, but I could also do without 4-corner carry on a $200 knife, and same with a sleeved lanyard hole. I think both the lanyard sleeve and funky carbon fiber detract from the appearance of the knife. The pocket clip could use a little work too. But by and large this is a solid effort for Spyderco, and I think it will be an excellent addition to anyone’s collection of high end production knives.

Spyderco Domino Plain Edge Knife

Category name: locking-knives
Country of origin: taiwan
Brand name: Spyderco
Tip Carry Position Tip-Up/Down

I recommend purchasing the Spyderco Domino at BladeHQ or Amazon. Thanks for checking out the review.

Spyderco Southard Flipper C156GBN Review

by Dan Jackson 17 Comments

Last Updated: July 30, 2019
If you have been following the production knife scene the past couple years, then you know that titanium framelock flippers have gotten extremely hot. This has a lot to do with custom and mid-tech makers that often set the trends, which eventually trickle down into production knives. Larger companies have finally taken notice, and now they want their piece of the framelock flipper pie.

Buy the Spyderco Southard Flipper at BladeHQ

Buy on Amazon

This has resulted is something that Andrew and I refer to as the “framelock flipper arms race.” When Zero Tolerance released their 0560 model not too long ago, it upped the ante in terms of materials selection, build quality, and technology. ZT loaded their knife to the gills with features like a caged bearing system, 3D contoured handles, and even going so far as to pocket out the titanium to lighten the knife. The 0560 continues to be a technological marvel as far as the production knife industry is concerned, but other companies, including Benchmade and Spyderco, have stopped to take notice – to the point where both companies have released their first models featuring a flipper in 2012-2013.

In this case we have Spyderco’s addition to the framelock flipper arms race: the Spyderco Southard Flipper. They decided to damn the titanium torpedoes and embark on a high-end collaboration with acclaimed custom knife maker Brad Southard. Known for his practical and well engineered designs, Brad has slowly carved a name for himself since he started making knives full time in 2009. Brad subscribes to the ideology that form should follow function, and he ultimately believes that good design is a marriage of aesthetics and performance. Technology also plays a key role in his knives, and this collaboration with Spyderco is a veritable cornucopia of the latest and greatest. Unfortunately for the consumer the price tag reflects this as well, with the knife arriving with a whopping $399.95 MSRP.

Does the fabled Southard Flipper deliver enough bang for the buck to make it worth adding to your collection? How does it stack up to something like the ZT 0560? Lets find out…

General Dimensions and Blade Details

The Southard Flipper has an overall length of 7.96″, features a 3.46” blade, and weighs a solid 4.1 ounces. This is a jewel of a knife, beautifully manufactured for Spyderco in Taichung, Taiwan. Proud Americans may dismiss the knife offhand for having both a $250 retail price and the words “Taiwan” laser engraved on the blade, but I assure you the quality is 100% there. The knife is beautifully made and has a reassuring heft to it – made possible by thick slabs of steel, titanium, and G10.

As for the knife’s intended use, I mainly see the Southard Flipper as a collectible or high end EDC option. I have mostly been carrying mine on the weekends, as I find it a little too chunky to be paired with slacks in an office EDC. Your mileage will certainly vary.

The blade is a signature Brad Southard modified drop point design. Cut from a thick piece of Carpenter CTS-204P stainless steel, the profile swoops and slopes into an abrupt tip. The partial hollow grind terminates at a neatly applied edge, and the entire blade has been given the ever popular stonewashed finish.

CTS-204P is apparently the latest in a line of high performance steels from Carpenter. According to their data sheet this steel has been specifically formulated for high end cutlery applications. This is the part of the review where more sophisticated reviewers would spend a few moments to wax poetic about the chemical structure and technical merits of the steel, but I have neither the time nor the inclination for such diversions. Instead, I elected to simply start cutting stuff. Hey, at least I’m honest.

My knife came with an extremely sharp and aggressive edge. It almost reminded me of the M4 on my Gayle Bradley in how razor sharp and aggressive it was out of box. I actually moved to a new house in the middle of my testing phase, so the Southard Flipper got a chance to open up many cardboard boxes. It zipped through cardboard with alarming speed and efficiency. I decided at this point I wanted to try a more formal cut test to get a better feel for the knife and the steel.

I started out with a 6″ length of 3/8” sisal rope. I made cuts every inch. In some cases this is a difficult and painful test for me to get through. The Southard Flipper crunched through the rope without even blinking. It was one of the easier rope cut tests I have done, and the knife could have easily handled 2-3x as much rope.

I then moved on to some more cardboard boxes. The Southard flipper once again worked with impressive speed and agility as I cleanly cleaved a couple pieces of 3-ply commercial grade cardboard into confetti. At this point in the test I felt the edge could use some help, so I stropped it briefly. The 204p came back to factory sharpness with little effort – surprising considering how the blade has likely been heat treated to well over 60 hrc (Spyderco does not list the actual hardness of the steel).

I wrapped things up by whittling some 2x2s. It worked through the wood, but I was not super impressed with the carving performance of this knife. This shouldn’t be too surprising as the blade is 4mm thick and features a partial hollow grind. I found it was not the most efficient tool for cutting up apples either.

At the end of the day I was pleased with the performance of both the knife and the 204p steel. The steel is capable of taking an amazing edge, I had no issues with rust or corrosion, and the edge held up well. It’s a nice knife and is well suited for EDC tasks.

Handle, Ergonomics and Pocket Clip

The handle of the Southard Flipper is primarily comprised of titanium and g10. On the locking side you have a full titanium frame lock with a G10 overtravel prevention mechanism. On the non-locking side there is a brown G10 scale over a thick titanium liner. Everything is screwed together, and features flow-through (pillar) construction.

The knife is immaculately finished. The hardware gleams, every corner has been meticulously finished, and the knife feels like an absolute gem. The titanium liner has been drilled out to reduce the weight somewhat, but this is still a knife that I feel in my hand and in my pocket.

One thing to note is the asymmetry of the thickness of the handle; the non-locking side is noticeably thicker than the locking side. I am not sure if this was a conscious design decision, or if Spyderco was not willing to have the G10 side 3d machined like on the ZT0560. Since the knife is equipped with an internal stop pin and captured ball bearing system, it is necessary to have a metal liner of some sort. At any rate the asymmetry is interesting. In my video review I talk about the character of the knife and the odd juxtaposition of high end materials and meticulous finish next to the somewhat quirky and almost primitive design. I think it’s an interesting contrast, although I’m sure the asymmetrical handle will drive some people nuts.

Moving to ergonomics, I find the Southard Flipper to be extremely comfortable. A rope cut test is always a good workout for the handle of a knife, and hard carving / whittling can also quickly reveal hot spots and ergonomic issues. I found that the Southard performed fantastically in the rope cut, and was decently comfortable when carving. The knife is pretty thick and that chunkiness serves it well when putting some extra force behind the edge. The jimping on the spine of the blade is damn near perfect in my book. It’s got a little bit of traction without being obnoxiously sharp or painful. It’s just a comfortable knife.

In contrast, the pocket clip is a little underwhelming. Stylistically it looks cool, and is plenty sturdy / well made. However, I find it’s a little sharp on the tip, doesn’t exactly run with the lines of the handle, and doesn’t carry particularly well. I think a thick and heavy knife like this could benefit from a deeper carry clip. Although none of this strikes me as a deal breaker, I’ll openly confess that I feel the pocket clip is the weakest link.

Deployment and Lock

The more reviews I write the more I wonder how painfully obvious this section is. Of course what we have here is a flipper mechanism, and Spyderco’s first at that. I find it generally works pretty well.

When you have a firm grip on the flipper the detent is strong enough to easily pop the knife open. That said, I’ve flubbed the flip many many times, and wonder if an even stronger detent would be appropriate here. I’ll be the first to admit that this is me being nit picky, but on a knife of this caliber I might as well provide the entire story.

The knife does open nicely however, and the blade rotates smoothly around an over-sized pivot and caged bearing system. There is also the “trademarked” Spyderco thumb hole on the blade, but it’s impossible to use with your left hand, and a challenge to actuate with your right, so I find myself not having a whole lot to say about it.

Lockup is exceptional. My lock engages around 40-50%, and has been like that since the day I bought it. The lock engages easily, has no stick at all, and the knife is absolutely rock solid in every direction. The pivot must have some industrial strength [easyazon-link asin=”B0043EK14O” locale=”us”]loctite[/easyazon-link] on it, because I have been opening the knife obsessively for weeks and have yet to have a need to adjust it.

There is also a small g10 lock bar stabilizer inset into the framelock that matches the G10 scale on the opposing side. It looks interesting and does a good job of preventing the lock bar from over-extending. All said and done I am impressed with the lockup on this knife.

Spyderco Southard Flipper Review – Final Thoughts

So, Spyderco’s first flipper… did they nail it or fail it? I have to say, I like the knife a lot. Brad’s design is sexy and sophisticated, and the Taichung factory has once again produced an amazingly well built knife. Say whatever you want about overseas manufacturers, but the Southard Flipper is immaculately made.

The Southard Flipper also performs. It’s comfortable, balanced, and cuts nicely. I had a blast working through rope and cardboard. It’s not the keenest slicer, so chores like cutting apples and carving wood won’t be it’s forte, but overall the Southard Flipper is a capable tool.

If I had to point out the weaknesses of the knife, I’d say the pocket clip could use a little work, the flipper could benefit from a stronger detent, and I could live without the lanyard tube. Aside from that I find little fault with the knife. I will say once again that this is a heavier knife and in my pocket it is more appropriate for jeans or casual clothing – this is not a gentleman’s folder.

And lets spend a moment on the “value proposition” of the Southard Flipper. Some will balk at the $220 price tag, and I can appreciate that – this is an expensive knife, and it isn’t for everyone. But frankly, discussions about value don’t interest me much. Sure, I appreciate a good deal, and understand the value of a dollar, but much like a Chris Reeve Sebenza or a Strider SNG, we are looking at luxury items. No one ‘needs’ a Southard Flipper.

As someone who owns a wide range of folding knives I think the Southard Flipper will be well worth it to fans of high end Spydercos, and fans of titanium framelocks / flippers. It’s a beautiful knife.

And where does it stand next to the ZT 0560? Personally, I prefer the Southard. The 0560 is a cool knife, but I prefer the size of the Southard more and the knife has this wonderfully solid and well balanced feel to it. Practically speaking I find it more comfortable to cut with too. Sure, the 3D machining on the 0560 is nice, and it’s great to see the 0560 being made in the USA, but I still prefer the Southard more. Have an opinion? Feel free to leave it in the comments section below.

Spyderco Southard Folder G-10 Plain Edge Knife, Brown

Made using the highest quality materials
Tested for quality and durability
The most trusted name in you cutlery needs
Flipper blade opening device
CTS 204P hollow-ground blade

I recommend purchasing the Southard Flipper at Amazon, or BladeHQ. Purchasing anything through any of the links on this website helps support BladeReviews. As always, any and all support is greatly appreciated! Thank you very much for reading.

Spyderco Techno Review

by Dan Jackson 17 Comments

Last Updated: August 4, 2019
The Spyderco Techno is a small titanium framelock folder with all the fixings. It is designed by Polish maker Marcin Slysz, who doesn’t seem to have much in the way of background information on the internet. According to Spyderco, Marcin is an extremely talented knifemaker of international repute.

Buy the Spyderco Techno at BladeHQ

Buy on Amazon

I must admit, the knife designer’s pedigree isn’t what drew me to this one. Rather, I was taken in by the Techno’s charming design. Featuring bold lines and plenty of personality, this one really struck a chord with me. The fact that this knife also includes CTS-XHP supersteel and 6AL-4V titanium handles further piqued my interest. And when I learned it would be produced at Spyderco’s now legendary Taichung Taiwan facility, well, that sealed the deal.

General Dimensions and Blade Details

With an overall length of 6″, a 2.55″ blade, and a weight of 3.6 ounces the Techno falls firmly into what Spyderco likes to call “little big knife” territory. This a nice little nugget of a knife. It’s a great size for EDC and would also do well in anyone’s collection of titanium framelock folders.

The drop point blade has been fully flat ground from a very thick (4.5mm) piece of steel. Out of the box I wasn’t super impressed with how this knife cut paper, but I quickly gained respect for the Techno after attacking some super tough 5/8″ manilla rope, and carving up a pressure treated piece of pine. While the thick blade is not the most amazing slicer, the knife is ground relatively thin so you still have a capable cutter on your hands. The thick stock carries out all the way to the tip, leaving you with a stout blade able to handle a large variety of tasks.

Spyderco selected CTS-XHP steel, which has previously never been used on a production level Spyderco knife. This is also my first experience with CTS-XHP, and I was eager to try it out.

So far my experience with CTS-XHP has been extremely favorable. It’s a powdered stainless steel with an ultra fine grain structure. When I sharpened the knife I didn’t have any issues and it has held a hair shaving edge through a number of nasty cutting chores including the aforementioned rope and wood tests, a good deal of cardboard, and a number of little EDC tasks that I encountered in my several weeks of carry time. The edge holding was extremely impressive, I had no issues with chips or rolling, and saw no signs of rust or staining either. I would definitely place CTS-XHP above something like S30V, and I look forward to spending more time familiarizing myself with this steel.

Handle, Ergonomics, and Pocket Clip

The handle slabs are full titanium, and they have been given a tumbled finished for an attractive and easy wearing look. The handles have a smooth feeling to them (contrast it with a blasted finish on something like the small Sebenza), but it feels really high quality, and there actually is a decent amount of grip. There is a partial backspacer made of blue G10. I know some guys will really like the blue G10. Personally, I would have preferred to see titanium or carbon fiber instead. This is one of those “your mileage may vary” situations, so feel free to disagree. Overall, handle construction is rock solid. Everything screws together and all the edges have been nicely chamfered and meticulously finished. It’s really very impressive, and difficult to describe in a single paragraph.

The ergonomics on this knife are surprisingly good. It’s a small blade so naturally I wasn’t sure how it would fit my larger hand, but I can get a comfortable 4 finger grip here without issue. There is a run of coarse jimping on the spine that looks good and provides a little traction for your thumb. The back of the blade is also wide enough to accommodate your thumb, giving you plenty of room if you desire it. There is more jimping on the backspacer. Again, it is more for decoration than anything, but it does offer some traction. There are definitely more comfortable knives on the market (consider the Sage 2 if you want to keep it reasonably small and also in the Spyderco titanium framelock family), but all in all I am very pleased with how this knife feels in hand.

The pocket clip is the excellent Spyderco wire clip. This is a proven clip design that I personally have had a lot of experience with. This one has been sandblasted for a unique finish that will wear well, and it is positioned for ambidextrous tip up carry. I happen to be a big fan of the wire clip, and think Spyderco did an excellent job integrating it with the Techno. The knife rides very deep, and makes for an extremely discrete carry. At 3.6 ounces I did tend to notice this one in my pocket but, it’s not going to weigh you down.

Deployment and Lockup

Since this is a Spyderco, deployment is made possible by a thumb hole – this time of the 13mm variety. It is well placed for right hand access, and is easy enough to get at with your thumb. Unfortunately, lefties will have a slightly different story. The thumb hole is partially blocked by the titanium lock bar, and it is difficult to access with the left thumb. I can pinch out the blade with my thumb and middle finger, but don’t expect to open this like a normal Spyderco. I can also sort of flick the knife open with my index or middle finger, but really it is a design with right handed people in mind. I still like the knife despite these issues, but it’s definitely something to consider if you are a lefty eying this design.

The detent is firm, but the blade gives way to very smooth action aided by the phosphor bronze washers. Initially the knife was a little stiff, but that is because the tolerances are so tight. Mine almost immediately started to break in, and within a week or so of use it is became very smooth.

For lockup we have a titanium frame lock. Spyderco pays homage to the lock’s designer Chris Reeve, and refers to it as a Reeve Integral Lock (RIL) in the Techno’s documentation. This is a nice touch in an era of intellectual property shenanigans.

Practically speaking, I am extremely impressed with how this knife locks up. I hate to use hokey catch phrases like “this knife locks up like a bank vault,” but this knife locks up like a bank vault. It’s really impressive to slowly move the blade and hear the chunky framelock fall into place. My lock engages early (around 25%), hasn’t budged a millimeter (even after hard use and repeated flicking of the blade open), and there is zero blade play to speak of. Much like the finish of the titanium handles, you just have to feel this one for yourself to truly appreciate how nice it really is. It blows the Sage 2 out of the water, and gives the Chris Reeve Knives I’ve owned a good run for their money.

Spyderco Techno Review – Final Thoughts

Spyderco has another winner on their hands here. From a fit and finish perspective this knife is immaculate. If you have owned any of Spyderco’s other Taiwanese knives you will begin to understand where I am coming from, but even for their Taiwanese factory this knife is impressive. No doubt fans of Spyderco and titanium framelocks will find a lot to like with this little knife. It’s just really well done.

Now that I am done gushing over the knife I do have some caveats for you. First of all, it is expensive and small. I don’t necessarily have a problem with either of those things, but I’m not going to say this knife is for everyone either. From a cutting perspective the geometry is a little chunky. Spyderco did thin the blade out, but the relatively narrow profile and thick stock has its limitations. Also, the ergonomics are good, but not outstanding. So the Techno is far from a perfect knife – at least on paper. However, if you are willing to overlook that sort of thing, and approach the knife from a wider perspective, then I think you will be very pleased with the Techno. It’s one of the most solid folding knives I’ve had the pleasure of reviewing, and the feeling of quality I get from this knife is difficult to describe.

I also have to “keep it real” for my fellow lefties. This really isn’t a knife designed for us. I’ve managed to overcome the opening adversity, but unless you really like the design I don’t think it is worth the struggle.

All in all I’m really impressed with the Techno. If you like smaller knives and have the money, check it out. It’s a very cool little knife.

Spyderco Techno Titanium Plain Edge Knife

Collaboration with knifemaker Marcin Slysz
Fully flat ground CTS-XHP blade
Titanium handle with blue spacers
Chris Reeve Integral Lock (RIL) with a deep pocket wire clip
Closed Length (Inches): 3.43, Overall Length (Inches): 5.98, Blade Length (Inches):2.55, Blade Steel: CTS XHP, Grind: Full-Flat

I recommend purchasing the Spyderco Techno at Amazon or BladeHQ. Thanks for checking out the review.

Spyderco Lum Chinese Folder Review

by Dan Jackson 13 Comments

Last Updated: August 4, 2019
I have always enjoyed Bob Lum’s elegant approach to designing knives. I have previously reviewed a couple of Bob Lum’s creations, including the Spyderco Lum Tanto and the Benchmade Onslaught.

Buy on Amazon

The Lum Chinese Folder is another elegant knife, and in some ways it is even more special than his other designs. To start, I love the sheer simplicity of this knife. The Chinese Folder is a single graceful curve in the both open and closed positions. There is a real feeling of balance with this design, and it results in a knife that is both a pleasure to view and to hold.

Spyderco has released many versions of the Chinese Folder over the years, but what you are looking at in this review is one of the original versions of the knife, manufactured in 2000. Furthermore, this knife has been serialized. That designates it as part of Spyderco’s first manufacturing run, also known as a Spyderco “Collector’s Club” knife. So what we have here is a very special version of the Lum Chinese, and I couldn’t be more pleased to share it with you.

General Dimensions and Blade Details

The Lum Chinese Folder has an overall length of 7-3/16 inches, features a 3-5/32 inch blade, and weighs a mere 2.8 ounces. The Chinese Folder could work as an EDC knife, a gentleman’s folder, or simply a collectible. Either way the size-to-weight ratio of the knife is pretty wild. A sub 3-ounce carry weight on this relatively large and sturdy knife is incredible. And I have to say, the Chinese folder feels impossibly light in hand. If this all sounds a little too delicate, Spyderco also makes a large version coming in at a beefier 4.3 ounces.

The blade of the Chinese Folder is often referred to as “leaf shaped.” What we have here is a graceful arcing blade that has been given a full flat grind, and a very small swedge running pretty much the entire length of the spine. This is not only a pretty blade to look at, but it is highly functional as well. The Lum Chinese is an exceptional slicer with its full grind and 3mm thin blade. Speaking of thin, this blade is very thin behind the edge, and is a big part of what makes the knife cut so well.

My Lum Chinese is made in Seki City, Japan and features Japanese VG-10 for the blade. A stainless steel, VG-10 is easy to sharpen and is capable of taking a razor sharp edge. It is also highly resistant to corrosion. I am a big fan of VG-10, and think it is a natural choice for the Lum Chinese. Fans of higher performance steel may be interested to learn that the Lum Chinese has also been previously offered in ZDP 189 as well.

Handle, Ergonomics and Pocket Clip

The handle on my Chinese Folder is aluminum, and has been given a green almite coating. Almite is simply a type of finish for aluminum (like hard anodizing). Over the years Spyderco has released the Chinese Folder in a number of different handle materials including carbon fiber, various colors of aluminum, titanium, and G10. I happen to really like the dark green color of this knife. It’s a deep green, and from a collector’s perspective I find the unique color to be extremely intriguing. As for actual construction, my knife is screwed together. There is a black G10 backspacer, and a single steel liner. Overall, construction is lightweight, but solid.

In hand the Lum Chinese fits surprisingly well, but is not without it’s caveats. The curvature of the handle matches the contours of my palm and the knife is quite comfortable to hold. Despite this, I wouldn’t recommend the Chinese Folder for anything beyond medium duty. The aluminum handles are somewhat slippery and there is no thumb ramp, finger choil, or any kind of jimping. For light to medium use I think the ergonomics are quite alright, but lets be honest – this isn’t a knife you will want to take to war, or be in your pocket aboard a commercial fishing boat. I really don’t mind that as the knife market is already well saturated with those kinds of knives.

The pocket clip is a simple stainless steel Spyderco clip. It offers good retention and makes the knife easy to insert and remove from your pocket. For carry options you have the choice of right side tip-up or tip-down carry. All-in-all I really like the way the Lum Chinese carries, it’s extremely light and very thin. This is a knife you will forget is in your pocket.

Deployment and Lockup

The Chinese Folder features a 12mm thumb hole that is easily accessible from either side of the knife. The Chinese isn’t the fastest deploying knife in my collection, but it opens easily and feels very smooth. Thin phosphor bronze washers aid in deployment.

The Lum Chinese has a thin linerlock and it snaps open crisply. It’s a very satisfying sound from such a small knife. Lock engagement is early, and I detected no zero blade play. I know that the somewhat thin liner lock will disappoint some, but given the intended use I have found it to be quite adequate.

Spyderco Lum Chinese Folder Review – Final Thoughts

The Lum Chinese is a graceful knife that is a delight for all the senses. I have greatly enjoyed mine, and spend a fair amount of time admiring the clean lines, the beautiful handles, and the crisp action. The knife works, and it will certainly cut, but the form-over-function approach to the ergonomics keeps this knife from becoming a real user for me. That doesn’t mean I don’t like the knife, but I just want to “keep it real.” If I had to pick one EDC knife to take to the grave, then the Lum Chinese wouldn’t be it. But if I was looking to add an elegant and unique Spyderco to my collection, well, I’d be all over this one. I feel that the Chinese Folder is a very special knife, and it has been an absolute pleasure to spend some time with this gem of a folder.

At the time of this review the Lum Chinese Folder can be had in both a carbon fiber version and a large version in black G10. If you really like the knife then I recommend picking up a couple. Like my original green-handled beauty, you never know when the knife might slip out of production.

Spyderco Lum Chinese Folder – $139.95
Retail Price: $219.95
You Save: $80.00
from: BladeHQ

I recommend purchasing the Lum Chinese Folder at Amazon or BladeHQ. Thanks for checking out the review.

Spyderco Paramilitary 2 Review

by Dan Jackson 50 Comments

Last Updated: July 13, 2019
Poll any knife reviewer, knife YouTube Channel, or knife forum, asking what the best Every Day Carry (EDC) knife is, and the Spyderco Paramilitary 2 is going to come up time and time again. It’s a rock star in the EDC world, and for good reason. It’s a form follows function design with great cutting ability, great ergonomics, and that difficult to describe “X” factor that keeps people coming back year after year.

Buy the Para 2 at BladeHQ

Buy on Amazon

I originally purchased and reviewed this knife in 2012. Looking back, the review is a little stale, but the knife continues to be in my personal rotation of daily carry blades, and it continues to have captured the hearts and minds of knife enthusiasts around the globe. So I am going to try to break down why the knife is so good in this updated Spyderco Paramilitary 2 review.

And let me assure you that this is not some flash in the pan hot take. I’ve owned this knife for over 5 years now, and have compared it to hundreds of knives. I’m giving the review a major update in 2018. So strap in and lets explore why this USA Made gem continues to hit all the buttons for edged enthusiasts.

General Dimensions and Blade Details

The Para 2 has an overall length of 8.3″, a 3.4″ blade, weighs 3.75 ounces, and is made in the USA. This is a larger knife, designed to be either a tactical knife or a heavy-duty utility folder. I also know that for many, this is an EDC knife. Personally, the Para 2 is a little bigger than what I typically like to carry, but my knife has seen plenty of use on the weekends.

I must not be alone in finding the Para 2 on the large side, because in 2017 Spyderco released the Paramilitary 3. Ben wrote a full review on it.

The Para 2 features a classic Spyderco drop point blade. It’s been given a full flat grind and is made from 3.5mm blade stock. The knife has a nice amount of belly, an excellent tip and has proven to be a tremendous slicer. Rounding things out is a well ground edge that came extremely sharp. I have found that this is a great knife for food prep. For example, I had to slice a lot of large ciabatta rolls, and the 3.4″ blade really made easy work of the task.

You have the option of a satin finish (shown here) or a diamond like carbon (DLC) coating for the blade on your Paramilitary 2. I like DLC coatings a lot, they are about as good as a knife coating can get, but I have no experience with Spyderco’s formulation. I can say that everything I read about their DLC coating was favorable, and I love my satin finished version.

Blade steel is the very capable S30V. Knife enthusiasts won’t need me to say much about S30V, it has been popular for close to a decade now. But for the uninitiated this is an all around excellent steel. It has been usurped by S35VN and other even more premium steels over the year, but S30V remains more than adequate for most people. S30V is relatively easy to sharpen, takes a very nice edge, and can hold a good working edge for a very long time. It’s also quite resistant to rust and corrosion.

Spyderco has released a number of sprint runs of the Paramilitary 2 over the years in a wide range of exotic steels and handle colors. I’d like to see them upgrade the standard Para 2 to S35VN or CTS-XHP at some point. For the time being a premium version of the knife in S110V with blurple scales is available (apparently as a non-sprint run on Spyderco’s regular lineup for the foreseeable future).

And here is a size comparison with the Para 2 next to my Sage 1:

Handle, Ergonomics and Pocket Clip

The Paramilitary 2 handle is black G10 over nested stainless steel liners. The liners have been milled out somewhat to reduce the weight, and at 3.75 ounces the knife is very light overall. The corners have all been nicely rounded and the liners sit flush with the G10. Everything is screwed together and you have an open construction design with 2 pillars and a very large lanyard loop. All in all, handle construction is top notch.

The ergonomics on the Para 2 are outstanding. Spyderco has once again made excellent use of a 50-50 choil to give you more options and better control over your knife. A 50-50 choil is a finger choil made from both the blade stock and the handle. What I like about this is that you have the option of setting your hand back on the knife to maximize reach, or you can choke up for more detailed cutting tasks. Either way the handle is plenty big and extremely comfortable.

The 50-50 choil is part of the reason why so many Spyderco knives consistently get excellent ergonomic ratings from me. Rounding things out is perhaps one of the best jimped thumb ramps I’ve ever come across. The jimping is just phenomenal on this knife. It practically super-glues your thumb in place without being so toothy it’s uncomfortable.

The pocket clip is a standard Spyderco hour-glass shaped clip. It’s large and has a bright satin finish. It offers good retention and a decently deep carry. The clip works, but I’d love to see a blackened deep carry clip to come standard. That would make the knife more discreet in your pocket. Casey Lynch has developed a deep carry titanium pocket clip for the Para 2, and frankly I think I should get one of these. The standard Spyderco clip works, but it’s not my favorite.

The Spyderco Paramilitary 2 carries great in the pocket. Although this is a larger knife, the Para 2 is thin and relatively lightweight, so it doesn’t weigh down your pockets and doesn’t create much bulk. It’s no Dragonfly II, a knife I routinely forget I’m carrying, but the Para 2 carries surprisingly well for a larger knife thanks to the thin design.

Deployment and Lock

Deployment on the Paramilitary 2 is accomplished via an oversized Spyder-hole. And I really do mean oversized. At 14mm in diameter it is really a much bigger thumb hole than I am used to – but I quickly grew accustomed to it and now I absolutely love it. Deployment is incredibly, fast, smooth and consistent. This is a great knife to use with gloves and it ensures a smooth and effortless deployment with every flick. Backing up that oversized thumb hole is a pair of large phosphor bronze washers. These washers are very smooth and only get better as the knife breaks in. So deployment is just outstanding.

The Spyderco Paramilitary 2 makes use of a compression lock to lock the blade open. This is my first review of a knife with a compression lock, and my impressions of the mechanism are extremely favorable.

At first glance this might just appear to be a liner lock on the back of the knife – in practice that really couldn’t be further from the truth. The compression lock works by wedging a piece of the liner between the tang and a stop pin. As force is applied to the knife (from either the spine or the edge) the lock compresses and the sandwich of tang, liner and pin hold the blade firmly in place. The harder you push on the knife, the tighter the lock gets. It’s an incredibly strong design and is really quite ingenious.

There is no blade play of any kind with my knife, and the compression lock is easy to use with one hand. I like how you can disengage the lock and fold away the blade without placing your fingers within the path of the blade.

Another thing I really like about the compression lock is how easy it is to disengage with one hand. It may take a little practice at first, but it’s easy to close the knife one hand without putting your fingers anywhere near the path of the edge – a total impossibility with a liner lock or frame lock. This makes the knife infinitely fun to manipulate. In terms of pure blade-flicking enjoyment I rank it right up there with an axis lock. I’ve heard some accounts of the lock being sticky, I have not experienced that personally and would think that any stickiness would go away as the knife breaks in.

Here is a parting shot of my Para 2 next to the Benchmade Griptilian. And while I’m at it, here is a link to an article I wrote on the Spyderco Paramilitary 2 vs. the Benchmade Griptilian if you are trying to decide between the two.

Blade centering on my knife is perfect.

Spyderco Paramilitary 2 vs. Para 3

I’m sure many readers are looking for a size comparison between the Para 2 and Para 3. Ben reviewed the Para 3 back in 2017, and I acquired and reviewed a Para 3 Lightweight in 2019. Here is a size comparison between the two knives:

As you can see the Para 3 is significantly shorter. Now, I’ve got the LW version of the Para 3 so this isn’t exactly an “apples to apples” comparison, but the major difference between the Para 2 and 3 that I noticed is the shorter handle of the Para 3. It’s a good deal shorter. I’ve found the ergonomics aren’t quite as good on the Para 3, but it’s much more pocketable. That’s the biggest trade off.

You sacrifice some comfort and blade length for a smaller, easier to carry knife. True Spyderco fans will inevitably acquire both.

Spyderco Paramilitary 2 Review – Final Thoughts

The Spyderco Paramilitary 2 is just an outstanding knife. It’s no surprise that this is the EDC of a lot of serious knife collectors. If you poll a group of people who routinely purchase $100-500+ knives, odds are very good that a Paramilitary 2 is a serious part of their EDC rotation. This is for very good reason. You have a tough knife with premium steel that is wonderfully balanced, highly ergonomic, and extremely functional. When you factor in the ~$100 price tag and fact that it’s made in the USA, well, the knife just speaks for itself.

If you want a workhorse of an EDC or a robust folding tactical knife, I think that the Paramilitary 2 should be very high on your list. It easily makes my best EDC knives list and receives my highest endorsement.

Sale

Spyderco Para Military 2 EDC Folding Utility Knife - 3.42" CPM S45VN Steel Blade and Durable G-10 Handle, PlainEdge - C81GP2

Robust Yet Lightweight Build - Weighing just 3.8 ounces with an overall length of 8.26 inches, the Para Military 2 combines durability with portability. Perfect for EDC enthusiasts, outdoor adventurers, and tactical users.
Superior Blade Performance - Features a 3.45-inch full flat-grind CPM S45VN stainless steel blade for exceptional edge retention, precision cutting, and corrosion resistance. Its razor-sharp edge excels in everyday and heavy-duty tasks.
Ergonomic G-10 Handle for Comfort - The black G-10 handle is contoured for an optimized grip, ensuring comfort and control during prolonged use. Lightweight yet durable, it balances functionality with a sleek, refined design.
Excellent Compression Lock System - Spyderco's innovative Compression Lock provides rock-solid locking strength with one-handed ease. It ensures secure blade deployment and prevents accidental closure during rigorous use.
Customizable & Versatile Pocket Clip - The steel clip supports both tip-up and tip-down carry options, ensuring convenience for right-handed users. Whether for work or casual use, it allows for easy access and quick deployment.

I recommend purchasing the Spyderco Paramilitary 2 at Amazon or BladeHQ. Purchasing anything through any of the links on this site helps support BladeReviews.com, and keep this review train running. As always, any and all support is greatly appreciated.

Spyderco Dragonfly II Review

by Dan Jackson 21 Comments

Last Updated: March 29, 2020

Back in the day, I didn’t think I would like the Spyderco Dragonfly 2. I’m a big guy, and tend to carry medium size folding knives. I always felt that I would be under-equipped with a small knife. Maybe it’s a macho thing, I really don’t know. I like a good size knife. Something I can use comfortably.

Buy the Spyderco Dragonfly 2 at BladeHQ

No products found.

So the thought of packing a massive 5-7/16″ folding knife with me that weighs a whopping 1.2 ounces wasn’t super appealing. That is, until I got my hands on the Dragonfly II. It took me about 2 seconds to realize how badly I had underestimated this little knife. It punches well above its weight, and is one of the best EDC knives on the market. I originally wrote this review back in 2011, and I still carry and use my Dragonfly 2 to this day. This is a long term review that benefits from a decade of ownership. How many reviewers can say that? Let’s give this awesome EDC blade the full run down.

General Dimensions and Blade Details

The Spyderco Dragonfly 2 or “DF2″ has a 2-5/16″ blade, an overall length of 5-7/16” and a weight of just 1.2 ounces. You hear about knives that “disappear” into the pocket. This is one of them. I’ve literally forgotten I’ve had it in the pocket many times. It’s been few the wash a few times too. I love the Dragonfly 2 for Every Day Carry (EDC), it’s perfect for almost any kind of urban environment and it’s got a big enough blade (and more importantly, a comfortable enough handle) for most EDC tasks.

Here is a size comparison with the Delica and Endura:

You can see how the Dragonfly II is significantly smaller than both knives. Here’s a video review I did many years ago:

The DF2 comes with a beautiful little leaf shaped blade. The blade almost resembles a dart with its triangular shape. The small swedge running across the top softens the feel of the spine and the whole blade has been given a full flat grind. There is adequate belly and the tip is both fine and strong. This blade excels at opening mail and packages. My only gripe with the blade shape, is that it lacks a sharpening choil. A small notch at the end of the edge that allows you to easily sharpen the entire length of the edge. You don’t have a sharpening choil here, so it will be difficult to sharpen the heel of the blade with a flat stone. Instead I’d recommend a rod sharpener like the corner of a Spyderco Sharpmaker stone.

This knife was made in Japan and like many of Spyderco’s Japanese production knives this one features VG-10 blade steel. VG-10 is a good choice as it holds a good edge and is capable of getting extremely sharp. I say “good” choice, not great, because these days there are better blade steels out there. VG-10 was fine back when this knife was first released, but times have changed. Still, VG-10 is serviceable blade steel and it certainly still works. What I like about VG-10 is how easy it is to sharpen, and how it is resistant to rust and corrosion. Newer, more exotic steels will hold an edge longer, but VG-10 gets the job done. I think it’s fine here, but wouldn’t complain if Spyderco upgraded it to S35VN or something along those lines.

In practice, the Dragonfly 2 cuts well and is an imminently useful knife. I have used my knife for years and years. Mostly for pedestrian things like opening mail and packages, and light food prep. I’ve never prepared dinner with just my DF2, but the knife has no problem with tasks like cutting fruit and cheese. It’s a small blade, but it’s all you need for basic stuff. And it’s a nimble blade. I reach for it when I have a delicate task. The tip is fine, and the angled thumb ramp allows you to get great control over the blade. This knife is a workhorse and it cuts great.

Handle, Ergonomics and Pocket Clip

The handle on the Dragonfly is made of fiberglass reinforced nylon (FRN) and is covered in Spyderco’s bi-directional texturing. This is the same kind of texturing found on both the Delica and Endura and I find that it offers exceptional grip in both wet and dry situations. Unlike the Delica and Endura, the Dragonfly does not have stainless steel liners. That is not a problem for me because the handle feels plenty strong and it is a big part of the reason why this knife weighs so little. Fans of G10 and steel can rejoice because Spyderco also makes a G10 version. All in all handle construction is solid, I like that they used screws for easy take down and everything feels very well finished.

Ergonomics is where we really start to see this little knife shine. Most smaller blades suffer from poor ergonomics and get kicked out of my pocket pretty quickly. The Dragonfly has extremely refined ergonomics and squeezes big grip out of a small knife. First of all, you have a 50/50 choil and large thumb ramp. Both have been given a large amount of jimping. I am a huge fan of 50/50 choils, it really can transform the way a knife handles and what it’s done for the Dragonfly is no exception. But perhaps my favorite ergonomic feature is the way the back end of the handle has been shaped to support the pinky finger. This gives you a true 4 finger grip and allows for awesome leverage on the knife. In my mind, this little section of FRN is what really makes the Dragonfly work.

The pocket clip is another home run. This is a Spyderco wire clip and is perhaps my favorite pocket clip design of all time (really). Small, but very secure, this little piece of hardened steel gives you a deep and reliable carry. The handle has been designed to allows for ambidextrous tip up carry. My only suggestion would be to anodize it black like on my Sage 1 – then it would be virtually invisible riding in a pair of blue jeans or dress pants.

Here is your pocket clip shot:

Deployment and Lockup

The Dragonfly takes advantage of a 11 mm Spyder-hole. This is a good size for the knife and has been left kind of sharp, which ensures that you thumb will catch on it every time. Deployment is smooth and reliable and you can easily flick this knife open if you like. I have zero complaints with the deployment.

Lockup is achieved through a small lock-back positioned in the middle of the handle. I like the lock-back on this knife, it’s easy to get too and the spring isn’t too heavy. The lock-back makes this a fully ambidextrous knife as well (always a plus – especially when a lefty is writing the review). Lockup is rock solid on the FRN version, with zero play in any direction.

Here is a parting size comparison with a Benchmade Mini Griptilian and a Kershaw Skyline, two other all-star EDC knives:

Spyderco Dragonfly II Review – Final Thoughts

This has been the story of the little knife that could. I seriously have nothing bad to say about the Dragonfly. I am totally impressed by how well this thing works as an EDC blade. Since it weighs nothing I also like pairing this with a larger tactical folder; that way I always have the right tool for the job.

Perhaps the only downside is the price. With a price tag hovering in the $50 range, you are looking at Delica (and almost Endura) territory. Some might have a hard time justifying spending that kind of money on such a small knife, especially given the rest of Spyderco’s product line.

However, I love my Dragonfly II and it has remained one of my all time favorite EDC knives. It is hard to beat this small, lightweight package for daily carry. The knife is imminently useful when you need it, but disappears into your pocket. It has stood the test of time for me, and easily makes my best edc knives list. For fans of Spyderco and ultra lightweight EDC knives, the Dragonfly II is a no-brainer.

No products found.

If you would like to buy a Spyderco Dragonfly II, I recommend purchasing it at Amazon.com or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.