Emerson

Emerson La Griffe Review

The La Griffe, which apparently means ‘the claw’ in French, is designed by Fred Perrin and produced by Emerson. Fred Perrin is a French SpecOps veteran and martial arts practitioner who also designs knives on the side. Most of his designs are more or less designed to be weapons and his designs come from a martial arts background.

Buy the Emerson La Griffe at BladeHQ

Buy on Amazon

The La Griffe is really no different. It’s a short blade, with a short handle not necessarily designed for EDC tasks. Of course, a knife is a tool and is adaptable. Emerson makes a La Griffe called the White Water with an all serrated edge. As a kayaker, I can certainly see why one would want the finger hole for a good grip while on the water. I use the Gerber Remix as my kayak knife and it has a similar finger hole.

While it can be pressed into other tasks the La Griffe is a small, easily concealed weapon that most of us could find a way to carry with ease.

General Dimensions and Blade Details

The La Griffe sports a short 1.75-inch blade that blends into a 3.125-inch handle for a total length of 4.875 inches. It weighs only 1.5 ounces and is .125 inches thick. The knife is made from 154 CM steel that seems to be a favorite of Emerson and a good all-around knife steel.

It can get quite sharp, isn’t terribly difficult to sharpen, holds a decent edge and is very strong. Additionally, it’s corrosion-resistant which is an important feature if you are wearing it concealed against the body where it can be exposed to sweat.

Another Emerson calling card is the use of a chisel grind blade. That makes this a rough cutter for fine work but does make it easy to sharpen and supposedly it’s a stronger edge. As a knife designed to be a weapon, the chisel grind makes sense. It doesn’t need to be an edge designed for super fine and controllable cuts. It does need to be strong though, and being easy to sharpen is another excellent benefit.

The blade also comes in a stonewashed or black cerakoted finish. Mine, as you can see, is the stonewashed variant. The black cerakote adds a layer of additional protection and would likely be less eye-catching if accidentally exposed while being concealed.

The short blade and handle, as well as the relativeness thinness of the entire package, limits the scope of use for the knife. When a knife is purpose-built to be a small weapon it’s difficult to put it in play for other tasks.

Handle and Ergonomics

The handle is very thin and is designed to be easy to conceal. The downside to this is that it’s not extremely comfortable for heavy use or work. It’s very short as well and offers little leverage. It seems to be best suited for quick stabs and slashes.

The finger hole ensures the knife stays put. This is a must-have because the handle is so short and smooth. Without it gaining a grip on this knife would be near impossible. The handle does conform to the hands though. The curve in the middle goes around the middle finger and leverages out over the ring finger.

Overall it’s comfortable to hold, but it’s not going to be a heavy-duty worker. Splitting cardboard boxes quickly makes your hands tired. Fatigue and pain set in around the finger ring as well. I attempted to use the knife to help cut USPSA targets from sheets of cardboard and found the knife difficult to control.

The short and thin handle does make the knife easy and comfortable to conceal. It can be worn as a neck knife, or you can purchase an IWB loop as I did. The knife disappears and is invisible under a t-shirt.

Sheath

The included sheath is very simple and made from kydex. It covers the blade perfectly and locks in on the front portion of the finger ring. A distinct snap is heard as the knife locks in and its held in very tight. The majority of the finger ring is left exposed and you can easily fit your finger in and draw the knife.

The sheath also offers plenty of places to add accessories through the six holes that run from the top to the bottom. Plenty of places to add an IWB loop or necklace for carrying. The sheath is naturally ambidextrous and also very lightweight and thin. It won’t add much bulk if concealment is your goal.

Emerson La Griffe Review – Final Thoughts

The La Griffe by Fred Perrin and Emerson certainly succeeds as an easy to carry knife. It’s a vicious little tool that’s sharp enough to cut deeply. In a pinch, it would appear to be an excellent defensive weapon. Something you can use to cause injury, make space, and escape from an attacker. The simple design makes it impossible to drop and very difficult to have it taken from you.

My advice would be to purchase the knife if you want something easy and lightweight to carry as a defensive weapon. If you are looking for a standard EDC knife I’d look elsewhere. That’s not an insult to the La Griffe, just a reality-based observation. The La Griffe is easier to carry than most knives, especially for women who may not have actual pockets on their clothing. The La Griffe is well built and fearsome, and that’s what a defensive weapon should be.

Emerson La Griffe Neck Knife with Satin Blade

I recommend purchasing the Emerson La Griffe at Amazon or BladeHQ. Thanks for checking out the review.

Emerson Mini Commander Review

by Travis Pike 1 Comment

The Mini-Commander is my third Emerson folder and third in the line of CQC knives. I guess I’m an Emerson collector. I initially purchased a CQC-7BW during my Marine Corps days, then I purchased a Mini CQC-15 that I thought combined a cool tanto edge and a good belly to replace the 7. Now I have a Mini-Commander that I purchased for no real reason.

Buy the Mini Commander at BladeHQ

Buy on Amazon

Of course, it’s been serving as my EDC for several months now because you don’t buy a knife like this and not carry it. It’s a knife designed for guys and gals in the military as well as those who typically work in non-permissive environments, and its in a handier size. The Mini-Commander isn’t for everyone, and its combination of features do make it more or less suited for a niche group of users.

General Dimensions and Blade Details

The Mini-Commander loses half an inch of the blade from the standard Commander model and has a 3.4-inch blade with a deployed length of 8 inches. The Mini-Commander’s blade is .125 inches thick and is made from 154CM. The handle is 4.6 inches long and the knife weighs 4.5 ounces.

It’s a convenient and easy knife to pocket carry. The Mini-Commander features a recurve blade design that sports a very prominent belly. You get a lot of cutting edge in a very compact package. It’s got a standard drop point tip and has a black cerakote finish. A stonewash finish is also available.

The use of 154 CM is pretty standard with Emerson knives and a great overall steel. It’s an excellent compromise of features and specs, but also makes an outstanding metal if you deploy to harsh conditions with your knife. Soldiers, Marines, Sailors, wildland firefighters, Border Patrol, etc.

154 CM is very corrosion resistant, and it is tough steel. It’s relatively easy to sharpen and can get quite sharp. 154 CM steel seems to be excellent steel when paired with a chisel grind. A chisel grind is quick and easy to sharpen, something I appreciated with the CQC-7BW when I was in the field and deployed.

You can get a good sharp edge with minimal tools and effort. The blade will also last. A chisel grind is a strong grind and when combined with a strong steel it makes a very dependable knife. When logistics suck you want something you won’t need to replace.

A chisel grind is great for most things, but don’t expect super smooth cuts. It has some grind to it while cutting. While it does cut, it doesn’t give me that tactile satisfaction I get from a super smooth cut. The belly of this blade makes it a great slasher.

The CQC knives and Emerson knives, in general, are designed to be weapons and EDC tools. I’ve never used a knife as a weapon, and likely never will. However, the belly on this knife would deliver deep, penetrating slashes in such an encounter. From my purposes, it’s perfect for cleaning game or cutting apples up for my kid’s basketball team. I do suggest washing the knife in-between those activities.

Handle, Ergonomics, and Pocket Clip

The handle is designed to fully fit the hand and it does well. The handle curves slightly forward, reinforcing the blade’s slashing design. The grips are made from G10 material and its heavily textured for comfort and control. The finger guard is deep and ensures nothing will slip and cause an accident.

The rear of the grip has jimping on both the handle and blade. It’s quite a bit and the thumb feels comforting pushing on it. Combined with the deep fingerguard and you’ll have a hard time losing your grip. If you do the grip does have a lanyard hole to ensure you really can’t lose this knife.

The grip is very comfortable and the grip design is well suited for slashing and slicing.

The pocket clip is nice and robust, very durable and it clings to your pants well. It’s certainly strong and well made. As a reader and commenter pointed out in my Mini 15 review the knife is only tapped for right-handed use.

Left-handed models exist and a right-handed model can be tapped for left-hand carry but that costs money. However, for the price of this knife, it should be ambidextrous. Most of the knife is ambi so a left-handed clip option should be standard.

Deployment and Lockup

This model features the Wave opening system. This allows you to open the knife as you remove it from your pocket. It’s neat, and if you were about to get into a fight its faster than an auto knife. However, it takes practice to learn.

In addition to the wave feature you have a thumb disk that is ambidextrous and easy to use. A flick of the wrist and thumb will send the blade flying out and locking reliably with just the thumb disk. This takes time and a little wear. The blade is initially tight and opens slowly but over time mine has become easy to flick open with the thumb stud.

The lock is made from titanium and its slightly jimped for an easy push release. What’s interesting is that my Mini 15 seems to lock up all over the place. The Mini-Commander locks up in the same spot every time regardless of how fast or slow I open it.

The lock is nice and tight and hasn’t let me down yet. Titanium may wear with time but it seems like little pressure or force is exerted over this lock so I doubt we are going to see many issues. I still haven’t seen any of the CQC-7 I’ve owned for years.

Emerson Mini-Commander Review – Final Thoughts

This is an expensive knife, with the price being close to 200 dollars. There are admittedly knives out there at that price that cut smoother, are thinner, and have left handed pocket clip options. However, the Mini-Commander’s combination of features does fill a certain role in the military and frontier world.

It’s nice to have a traditional point with a deep belly for slicing when fall deer season comes around and for tasks with a bigger cutting emphasis. It’s better for EDC than the CQC-7 and the mini designation makes it more comfortable than the standard Commander.

It’s a rock solid and well-made knife and it joins what appears to be my ever growing Emerson Collection with its own rightful place.

Emerson Mini Commander SF Plain Stonewashed Blade

Editor: I recommend purchasing the Emerson Mini-Commander at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Emerson Mini CQC-15 Review

by Travis Pike 4 Comments

The Emerson CQC line of folding tactical knives are downright legendary. Mr. Emerson’s knives were the first folding tactical knives and are common to see among the armed forces, with police, and of course average Joes like me. CQC stands for ‘close quarters combat,’ and these knives are designed to be used as weapons as well as useful EDC tools. This particular model is the Mini CQC-15.

Buy the Mini CQC-15 at BladeHQ

Buy on Amazon

The Mini CQC-15 is a compact option that retains the legendary quality and reliability of Emerson’s knives. The CQC series is quite expansive these days, and the knives come in various sizes, colors, and configuration. The Mini CQC 15 is a hybrid of the two most popular knives in the CQC line, the Commander and the CQC-7.

General Dimensions and Blade Details

The Mini CQC-15 is smaller than the CQC 15, but it isn’t a small knife by any means. It’s an average size EDC knife with a 3.5-inch blade. The overall length with the blade deployed is 7.9 inches, and total weight is light 4 ounces. The blade is .125 inches thick and is made from 154 CM.

The Mini CQC 15 sports the piercing tanto point of the famed CQC-7B and the recurve blade of the Commander. This odd combination does give you a versatile knife blade that stabs and slices easily. The belly isn’t as prominent as the Commander, but it’s still enough to make it a good choice for skinning deer. You also get that extra cutting edge in a shorter profile. The tanto blade is, of course, a great piercer. If used as a weapon in a military scenario it will make quick work of clothing, web gear, or uniform shirts.

The blade is made from a durable and corrosion resistant 154 CM steel. Its Emerson’s steel of choice for these knives and is a good steel for these knives in particular. It’s tough, but not hard to sharpen. The blade is a chisel grind which has some strengths, but also weaknesses. It’s very strong, easy to sharpen and the edge lasts a good while. A chisel grind is a rough cutter and feels like it catches and jumps when you are trying to do precise cuts.

In my time as a Marine, I carried an Emerson CQC-7BW. At that time I knew nothing about knives, but I knew the CQC-7BW was ‘the’ tactical knife. Over time I grew to appreciate 154CM steel and the chisel grind as something that was easy and quick to sharpen in the field. Often I had nothing more than the sharpening rod on my bayonet sheath.

Getting the Mini CQC-15 ready can be done quickly with minimal tools, time, or effort. In the tactical world, you might not have the tools and time to get a nice sharpening in. Your day patrol may turn into a three-day mission, and all you have is what’s on your back and in your pockets. You also want the edge to last and the blade to be strong. If it breaks in country, you can’t exactly go online and order another

Handle, Ergonomics, and Pocket Clip

The Mini CQC-15 is a fat bottom girl, and I love it. The handle is wide and fills my paws well. The knife has a palm swell, and a decent jimping for the thumb. The handle fills my hand very nicely, and I have no complaints about its design or shape. The grip design reminds me of a more subtle version of the ancient Greek kopis handle. It’s designed to aid in retention when cutting or stabbing.

The G-10 grips panels are aggressively textured, and some people might find it uncomfortable. You should bear in mind that by order gloves are part of the personal protective equipment of the uniformed services. Gloves can challenge grip, so this aggressive texturing is a must have for a knife like this.

The clip is nice and straightforward. It’s robust and has never bent or accidentally grabbed my chair as I go to sit. It’s tight, so the knife stays planted in the pocket. As the mini variant, it’s a bit more pocket-friendly. I never noticed any discomfort when carrying the knife. I never notice its even there until I need it. Unfortunately, it’s for righties only, but left-handed models of these knives are available. Seems a little ridiculous not to tap the knife for lefties

Deployment and Lockup

The Mini CQC-15 has a titanium liner lock that’s strong, but the knife seems to lock-up at different points. This is especially true if you use the wave method of opening these knives. Sometimes it goes extremely far and other times barely at all. However, I have never had the lock fail me in any way. I will admit I find myself subconsciously checking to make sure the blade is locked before getting the work.

Deployment can be done through a top thumb disk that’s ambidextrous, well textured and feels strong. It’s a slow deployment method, but a functional one. If you want to go a little faster, you have the wave method. The wave is based on that little hook on the thumb rest that is supposed to catch on your pants and open the knife as you draw it.

It’s a neat feature, but it doesn’t always work. It seems to work better in some pants than others. Pulling the knife like that is not dependable enough to trust in a self-defense scenario. I will say it works way better in jeans than in the typical material uniform pants is made of, which is odd seeing as who these knives are designed for. I may also be bad at opening a knife this way. The utility is there, but I can’t seem to master the wave.

Emerson Mini-CQC 15 Review – Final Thoughts

The lens you view this knife through is likely going to significantly affect your opinion on it. It’s not a graceful tool, and for the cost, you can get a knife that cuts smoother, features an ambidextrous pocket clip, and a more natural method of deploying the blade.

The Mini CQC-15, as well as the rest of the CQC series, is designed for folks in uniform. They have a broad set of features that make them an excellent knife for those in uniform. I still love it, and my CQC-7BW, but I am aware of my own bias and nostalgia. That being said its an objectively good knife, and one I would suggest if strength and simplicity are your main desire.

Emerson Mini CQC-15 with Plain Black Blade

If you are thinking of buying an Emerson Mini CQC-15, please consider purchasing it at Amazon or BladeHQ. Thanks for reading.

Kershaw Emerson Collaboration Review

by Andrew Gene 3 Comments

For 2014 KAI USA and Emerson Knives have teamed up to deliver the first high volume, overseas produced Emerson designed ‘CQC’ knives. The release targets a thirsty market of consumers looking for the designer’s distinct ‘tactical’ aesthetic coupled with the wave opening feature at an affordable price point.

Buy the Kershaw Emerson Collaboration at Amazon

The CQC in the name stands for Close Quarter Combat suggesting a professional application amongst LEOs, Military Personnel, First Responders etc. They are also commonly sold as a self defence products. Regardless of the implied market I think that these will be popular with the EDC crowd and collectors who are fans of the category.

A total of eight 2014 models fall under the Kershaw brand. There will also be two knives positioned in the higher end market, the 0620 and 0620CF. These premium versions have their own designs and will be released with Zero Tolerance which is also a KAI property. The topic of this review will be the Kershaw models : CQC 1K through to the CQC 8K. They are roughly designated their model number (1-8) by overall dimensions (length, width, weight) and cost. They can also be visually differentiated by lock type, handle construction, blade style and finishes.

General Dimensions and Blade Details

The 1K, 2K and 3K models are quite small and range from 6.35” in overall length to 7.45”. The 4K and 5K’s are slightly larger in over-all dimensions and weight, but not quite as large as the designer’s standard line. The 6K, 7K and 8K will probably be the models that people will find the most like Emerson’s typical offerings. These are near to the size of the Mini-Commander or CQC 7’s, ranging from 7.75” to 8.1”. The Roadhouse that is being used as a comparison is an inch bigger than the largest Kershaw coming in at 9.1” in Overall Length.

All of the blades are made from the steel 8Cr13Mov. This is a stainless that has both reasonable edge retention and corrosion resistance for the price point. If you are looking for added corrosion resistance the black oxide models would be a better choice than the stone-washed editions. That said, I much prefer the aesthetics and well wearing surface of a stone-washed blade. The stone-wash covers the entire surface (not just the flats) and is a little less defined than a US made Emerson but it still looks good.

Patterns range from three tantos (CQC-3K,CQC-7K, and CQC-8K to four modified clip points (CQC-1K, CQC-2K, CQC-5K and CQC-6K) to one drop point (CQC-4K).

A flat grind produces a durable yet keen edge. Each has a standard V grind and edge bevel with the exception of the 8K where a chisel grind has been utilized. While all eight knives come sharp, the thicker stock favors strength over delicate slicing, typical of this genre. To make another comparison, Emerson uses a .125” (3.14mm) blade stock. The Kershaws are slightly thinner at 0.113” (2.9 mm). A model number and the manufacturer logo is etched on one side of the blade and a modified Emerson logo and skull appear on the other. Skulls aren’t for everyone but it’s pretty small. If you’re into skulls, you’ll be happy to know there’s one on the clip too.

Handle and Ergonomics

The handles are a partially closed back construction that uses an injection molded back-spacer. Since some models are liner locks and others frame-locks, finishes vary. All models have a grip thickness of .4 to .5” making them feel stout in hand and present in pocket. The CQC 4K and 5K are the only two with colored scales, all the rest have black G10 with black-coated frame or liner locks. The stone washed editions have bead blasted 410 stainless frame locks. The CQC 8 scales have some milled in surface detailing.

The G10 texture is less aggressive than the standard Emerson peel-ply stock. Some people may criticize this and others will appreciate the lack of pocket wear. I fall into the latter. The stainless frame-lock editions don’t have any texture so there will be little to no pocket wear. Addressing the pocket clips, it’s important to note that they are all tip up and unlike stock Emerson’s, reversible for ambidextrous carry. Retention is great and works well with the wave.

The ergonomics are varied throughout the line. The smaller editions feel a bit small in my hands with their 3 finger grip. The 1K and 3K’s straighter handles feels more comfortable since there’s less of a curve on the inner edge toward the pommel. All of the models above the 3K feel great to me with the exception of the 8K which has some pretty specific lines. That’s not to say it won’t fit like a glove for some, but I would suggest holding it in person first if possible.

Once again I feel that the 6K and 7K’s hit a sweet spot. The deep finger groove adds excellent retention and the rest of the handle’s contouring nests comfortably in hand. The jimping on all models is fairly smooth yet still provides some feedback and traction in use. On all the models, the wave also doubles as a thumb ramp for finer control.

Deployment and Lockup

For deployment all models have both a knurled thumb-disc and the patented “Wave”. The Waves are, as far as I can tell, all the same size. Being familiar with the technique, I haven’t had a problem repeatedly and reliably opening the knives this way.

While most people who read this site know what the wave is, I’ll dial it back and briefly explain. The wave opening feature consists of a protrusion on the blade’s spine. When drawing the knife from a closed and clipped-on position, it catches on the rear seam of your pocket. With a quick up and backward movement the blade opens without additional manipulation. Because it all happens at the same time you produce the knife, it’s the fastest way to open a folder. This has made the wave a popular option on back-up or self defense knives as it combines easy carry with very fast deployment.

On the down side ‘waving’ a knife will undoubtedly be seen as an aggressive act if you’re doing it at the office. You’ll probably want to use the thumb-disc which allows you to deploy your CQC without the attention in those situations.

When open both liner and frame locks are solid and without play. Lock-up contacts close to, or at 100% of the lock face. I think that this is a good move. When opening with the wave is important to have a full and audible engagement for safety.

The fasteners used for construction are standard flat heads for the pivot and Phillips heads for the rest. This is great for easy adjustment when necessary. Any standard multi-tool or typical at hand screwdrivers will do.

Over-all the fit and finish of the knives is quite good. Some may be surprised that there are some areas where the Kershaw models are more resolved than their higher end counterparts. On the originals there is often rough tooling around the perimeter of the handles, liners and blade edges. The Kershaw models are quite clean. Blade centering on all eight of the knives received for review was spot on. Below are a couple of details that show differences in the fit and finish.

Kershaw Emerson Collaboration Review – Final Thoughts

All in, Kershaw did an excellent job bringing these designs to market. With all of the differences in sizes, shapes and finishes there should be something here for everyone. Releasing eight new models from one designer is a pretty bold statement but one that will likely be backed by excellent sales.

Personally I like the 4K through to the 7K, their ergonomics felt the most comfortable. The 6K and 7K stone-wash looks the slickest in my opinion. Personal taste aside, these are 30 to 40 dollar knives. About a quarter to a fifth of the price of a US made Emerson.

Kershaw Emerson Collaboration
From: BladeHQ

Editor: I recommend purchasing the Kershaw / Emerson collabs at Amazon. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Photo Credits: Andrew Gene

Emerson PUK Review

by Travis Pike 1 Comment

Last Updated: August 5, 2019
Emerson is well known for producing a wide variety of knives, but they are most famous for producing a tactical folding knife known as the CQC 7. The CQC 7 is popular among spec ops troops around the world. The CQC 7 is what caused Ernest Emerson to turn the company from a garage operation to one of the most well-known knife companies in the world.

Buy the Emerson PUK at BladeHQ

Buy on Amazon

By trade I’m a gun guy, and as a gun guy I find it easy to identify guns in movies. I’ve slowly become more and more of a knife guy and now I’ve started to notice knives in movies. Does this influence my interests? Sometimes… So, was Bruce Willis and Tears of the Sun on my mind when I snatched up an Emerson PUK? Sadly no, but once Tears of the Sun hit Netflix I got a little confirmation bias.

The Emerson PUK, or Police Utility Knife, is one of the few fixed blades Emerson produces. The PUK is not a big knife. It’s short and thin, but easy to carry. If Rambo has set the baseline for your commando knife, you’ll be disappointed at the subtle and small nature of the PUK. The PUK was made for police use, but according to Emerson has found its way into the hands of elite units like the British SAS.

I’m sure it’s a great knife for Bruce Willis’ Navy SEAL, but I wanted to find out what the PUK offered the everyday Joe.

General Dimensions and Blade Details

The Emerson PUK has an overall length of 8.5 inches with a 3.6-inch blade and weighs only 5.5 ounces. The PUK is one of the many Emerson knives made in the USA.

The Emerson PUK blade is only .125 inches thick. This thin blade helps keep the knife both balanced and lightweight. The blade is designed for heavy duty cutting and is made from a single piece of 154CM steel. 154CM is better suited for heavier cutting than standard stainless steel and has excellent edge retention. The biggest downside to this steel is its corrosion resistance. It’s far from perfect, but Emerson took steps and coated the blade to protect it against corrosion.

With the words Police and Utility in the name it’s safe to say this knife was designed to be more tool than weapon. However, I wouldn’t want to find myself on the wrong end of the PUK. The intent of the blade is for tactical use and the situations most police will find themselves in.

The cutting work of police is likely going to be heavy duty. Officers may be tasked with cutting through seat belts, through clothing, into the seats of cars and trucks, and much more. This kind of cutting requires a strong and capable knife. This is one of the advantages of using a fixed blade over a folding knife. With this in mind the blade’s V grind makes a lot of sense. V grinds tend to be better suited for heavy duty cutting. The PUK certainly has no qualms about slicing through materials both thick and thin.

I’ve taken the PUK to task by cutting through cardboard, an old pair of jeans, a ratchet strap, and some half inch thick rope. It glided through the cardboard and jeans, and only took a little effort to rip through the rope and ratchet strap. I’d like to try it against a seat belt but the Highway Patrol likely wouldn’t accept that as an excuse for why I’m not buckled up.

The blade’s short length makes it nice and handy. A 3.6-inch blade is something more common on folding knives, but it makes the PUK compact enough for easy carry. For plain clothes officers or civilians this thin and relatively short knife is easy to conceal.

Handle and Ergonomics

The handle is made of two pieces of G10 glass laminate material. G10 is a tough and easy to texture material. Oh boy, are the PUK’s grips textured. The grips are heavily scalloped and between the scalloping is a rough stippling. Near the inside of the grips is a step style texturing all the way to the center of the handle. The combination of these three-different grip texturizations gives you a one helluva grip on the knife. This grip isn’t shy about being rough.

In the hand this is nice because the knife isn’t going anywhere. You can chop, slash, and stab and the knife is staying put. The downside is that heavy work sans gloves really starts to rub into the hand. I developed a few hot spots during testing. This is one knife where tactical gloves are a must have for long term use.

Another downside occurs when carrying the knife concealed. It really rubs against the body to the point where it’s just plain painful. I would suggest an undershirt between the knife and body.

The handles form and shape is nice and comforting. It gives you a sure grip and the handle naturally forms a bit of a cliff to protect the index finger. On the opposite side a slight ridge rises and provides you a good point to rest the thumb for extra leverage.

Sheath

The old PUK’s came with nylon sheaths and this is what you see in Tears of the Sun. The new PUKs come with I’ve found to be one of the most robust and versatile sheaths options out there. It’s a kydex sheath that comes complete with a Tek Lok belt attachment.

The Tek Lok, from Blade Tech, is an incredibly versatile sheath mounting system. With the appropriate sheath you can easily change the orientation of the knife. You can do anything from add a little forward cant to mounting and carrying the knife horizontally.

The Sheath uses a passive retention system that ensures the knife stays put. It doesn’t take much to remove the knife, but it feels secure. I’m comfortable running the knife horizontally, and even upside down on tactical gear. The sheath is even compatible with MOLLE Lok components if you want to attach it to a vest or battle belt.

Emerson PUK Review – Final Thoughts

The Emerson PUK is a nice working mans fixed blade knife. It does nothing but excel at its role as a compact fixed blade utility knife. This short, but strong knife is an excellent companion for police and soldiers who want something more compact than your average fighting knife. I could see it being an excellent knife for first responders as well. The PUK could be a camping knife, but a heavier, more robust knife like the ESEE 4 would likely be a better outdoors option.

It’s not exactly a cheap knife, retailing at over 200 dollars. I will say I think the knife is worth the money, but it may not be a knife needed by your everyday Joe. If you are looking for a compact, lightweight and dare I say easy to carry fixed blade utility knife the PUK fills that role. It’s a high quality blade that lives up to its namesake.

Emerson Police Utility Fixed Blade Knife, Stonewashed Finish, 3.60 in Blade, PUK-SF

If you are thinking of buying an Emerson PUK, please consider purchasing it at Amazon or BladeHQ. By purchasing things through any of the links on this website you support BladeReviews.com, keep the website free of annoying banner ads, and help produce future reviews. Thank you very much.

Emerson Sheepdog Review

by Dan Jackson 10 Comments

Last Updated: July 30, 2019
Having reviewed many Emerson knives over the years, and reaching largely the same conclusions, you would think I am a glutton for punishment in selecting the Emerson Sheep Dog for review. However, the Sheepdog brings something new to the table. This is the first Emerson flipper I have reviewed, and it features their new ball bearing system. Plus the handle has been drilled and tapped for ambidextrous carry. This is big news from a company that is very much set in their ways.

Buy the Emerson Sheepdog at BladeHQ

Buy on Amazon

This isn’t the only flipper Emerson has done. They also released the CQC-7 flipper. The CQC-7 flipper seems interesting on paper, as flippers have been in vogue for years now and the CQC-7 is the knife that put Emerson on the map, but the design is uninspired and the end result is literally a CQC-7 with a gigantic shark fin flipper pasted onto it. I can understand the appeal to some, but personally I wasn’t interested.

In contrast the Sheepdog isn’t a model where the flipper was an afterthought. The knife was designed to be a flipper, per the specifications of Lt. Col. David Grossman, the man who approached Ernest Emerson about collaborating on a knife and designing something for David’s company Sheepdog Knife and Gun.

David Grossman is the author of On Killing: The Psychological Cost of Learning to Kill in War and Society, a seminal text on the psychology of the act of killing, how most men are reluctant to kill, and how law enforcement and military have trained people to overcome this reluctance. I’m sure On Killing makes for stimulating beach reading, but I didn’t pick up the Sheepdog to write a book report.

General Dimensions and Blade Details

The Sheepdog has an overall length of 8.4″, a 3.5″ blade, and it weighs 5.54 ounces. This knife is made in the USA. This is a purpose built utility and self defense knife geared towards law enforcement (hence the name). Grossman wanted something functional for a Police officer’s daily work, yet relatively non-threatening. The handle is generous, while the blade is big enough to get work done without being over the top. As usual this won’t be practical for your average urban or suburban EDC, but no Emerson is. I have carried my knife primarily on evenings and weekends.

The Sheepdog comes with your choice of a clip point or spear point blade. Personally, I like the look of the spear point a little more. I think that visually the spear point blade it balances out the handle a little better. It’s also a little less aggressive looking than the clip point. Both designs provide good all round utility and come with partial flat grinds. Both blade shapes are cut from 1/8″ thick blade stock.

As usual the blade on this Emerson is immaculate. Crisp lines, beautiful satin grinds, a generous sharpening choil, and sparkling stonewashed flats. The tip on my clip point is needle fine, while the spear point version appears to have a little more meat behind it. The primary grind is “V” ground, while the edge is only applied to the show side.

Like all the other Emerson’s I have reviewed, the Sheepdog comes in 154CM. At this point the 154CM stainless steel is a known quality. It comes sharp and stays sharp for a good while. Maintenance is easy. You sharpen the bevel side as you normally would, and that quickly raises a prominent burr. I then knock the burr off with a single swipe on a ceramic rod, and the blade is good to go. I have a suspicion that Emerson heat treats their 154CM on the softer side. It makes it an easy knife to sharpen, but you lose a little edge retention and the blade shows wear without much effort.

The Sheepdog takes a nice toothy edge, and has no problem with boxes, and I broke down plenty in the wake of assembling furniture and appliances for my rental house. I also used the knife on wood and for some mild food prep. The clip point is a practical blade shape, although it’s a little aggressive for use in public. It slices well, but also offers excellent penetration ability. Corrosion resistance is pretty good, but 154CM will stain if you aren’t careful with it.

Handle, Ergonomics, and Pocket Clip

The handle is classic Emerson: coarse peel-ply black G10 scales over a stainless steel non-locking liner, a titanium locking liner, black stand offs, Phillips head body screws, and a slotted pivot. Fit and finish is good on my knife. Emerson got a bad rap for their knives a few years ago for off-centered blades, tooling marks on the liners, late lockups, etc. These days those issues have largely disappeared. All the parts line up, the body screws are counter sunk, the edges are chamferred, and the pocket clip screws don’t stick out past the liners. If I had to nit-pick, I’d say that one of my liners is about .1 mm proud on one spot of the handle, but beyond that I can’t complain. This is a solid knife and it isn’t horrible to look at either.

The ergonomics of the Sheepdog may be inspired by Grossman, but they are pure Emerson. Like most of his designs the handle has an almost orthotic quality to it. The simple shape comes with decades of experience and the end result works great. Your index finger sinks into a deep finger groove while the flared pommel catches your pinky perfectly and the gently sloping spine supports your palm. This handle design would keep your hand in place work without excessive handle texturing, but of course Emerson offers the knife with sandpaper like G-10, and a broad thumb ramp with mild jimping. The end result is an undeniably comfortable and functional handle, but the G-10 will shred your pockets if you aren’t careful.

I know not everyone will share in my excitement, but I think the craziest feature on this knife is the fact that the handle has been drilled and tapped to accept a pocket clip on either side of the handle. Holy shit, what a concept. Some people may be less enthusiastic about this great advance in technology, after all these days you can get a $5 gas station knife that is drilled and tapped for ambidextrous carry, but for Emerson this is a big freaking deal. I’m glad Grossman got more than his company logo on this knife. Congratulations on getting this thing to come ready for ambidextrous placement of the pocket clip.

The clip is the same black parkerized stainless steel spring clip that you will find on every other standard Emerson. It’s a nice functional clip. Here it has been placed on the high on the handle for relatively deep carry. It’s not super deep carry, but you can easily retrieve the knife. The Sheepdog carries pretty well. It’s a relatively big knife, and it is thick, but it’s not going anywhere with this pants-shredding G-10. It carries as you would expect it to.

Deployment and Lockup

While the three extra holes in the handle are a big step forward, the flipper is what truly sells the Sheepdog. Since this is one of Emerson’s first flipper I wasn’t sure how successful of a flipper this would be. I was pleasantly surprised with what arrived. The Sheepdog flips well thanks in part to a large flipper tab, relatively heavy blade, and GTC bearing system. The detent doesn’t feel an stronger than your typical Emerson, and you can use the thumb disk or wave if you want, but it still provides enough resistance for the blade to flip open every time. The blade doesn’t pop like a Zero Tolerance flipper, but it isn’t a wet noodle either. I’d say it’s a solid 6 on a 1-10 scale, with a 5 being a Spyderco Domino, and a 10 being a ZT 454.

The GTC bearing system is worth another paragraph. Regular readers know I am not a fan of the teflon washers found in the regular Emersons. These bearings are like night and day in comparison. While the teflon washers are slow and gritty, these bearings are fast, smooth, and a pleasure to operate. This is is a caged bearing system designed by Brazilian custom knifemaker Gustavo Cecchini of GTC Knives. Gus knows what he is doing, and Emerson has done a great job implementing this bearing system into their knives.

Here is a parting size comparison with my Spyderco Paramilitary 2:

For lockup we have your typical titanium liner lock. As usual I found my lock was sticky out of the box. I applied a little Sharpie marker to the tang of the knife, and it helped tremendously in alleviating the lock stick. I have to re-apply the Sharpie every couple weeks but it makes the knife much more pleasurable to operate.

Blade centering is perfect on my knife.

Emerson Sheepdog Review – Final Thoughts

I think this is the Emerson knife a lot of people have been waiting for. While the company has made minor incremental improvements to their products over the years, the knives have remained largely unchanged. This Sheepdog is still very much a traditional Emerson, but the inclusion of bearings and an ambidextrous pocket clip are big steps. The flipper is successful as well. This isn’t the sleekest flipper design, and the action won’t rival a ZT, but the flipper is functional and less clumsy looking than the CQC-7 flipper. I think they did a good job with it.

I find little to complain about here. I am ecstatic about the switch to bearings. I wish they did this for all their knives. The extra pocket clip holes are nice too. The liner lock still sticks but there is a workaround if you are willing to periodically apply Sharpie marker to the tang of the knife.

I suppose the biggest hangup for me is the bulkiness of this knife. That shouldn’t come as a surprise as Emerson knives are always big and thick. You notice them in the pocket and people will notice you if you use the knife in a public setting. If you already realize that going into the purchase, then I think you will find a lot to like with the Sheepdog. It features significant improvements over past Emerson knives.

I easily recommend the Sheepdog for Emerson fans. But I also recommend it for someone seeking a large folding “tactical” knife. This is my favorite Emerson to date, and is a successful collaboration with Lt. Col. Grossman. I hope it inspires the company to try more new things.

Emerson Sheep Dog - Spear Point Blade - Folding Knife with Wave SF

I recommend purchasing the Emerson Sheepdog at Amazon, and BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.