Dan Jackson

Dan is the creator of BladeReviews.com. He founded the site in 2010, and for the first 5 years Dan wrote all of the reviews and recorded all of the video reviews. He grew up using pocket knives, and the decision to start the website stemmed from his fascination of all things sharp combined with a deep passion for writing. At this point he has personally reviewed almost 300 knives of all shapes, sizes, and price points. He is widely recognized as an authority on daily carry knives and has consulted with knife companies on product design and has been featured on national media outlets including the WireCutter. In 2016 Dan decided to branch out and experiment with the website by reviewing watches, flashlights, and multi-tools. Today BladeReviews.com features a number of expert authors reviewing a wide range of daily carry gear. He is proud to write detailed long format reviews with original photography. The website remains largely independent with the vast majority of the products reviewed being purchased by Dan personally. When he isn't writing knife reviews from his home in Southwest Florida, or talking about himself in third person, he enjoys practicing law, reading, fishing, cigars, and weight lifting.

At this point he has personally reviewed almost 300 knives of all shapes, sizes, and price points. He is widely recognized as an authority on daily carry knives. He has consulted with knife companies on product design and his opinions on pocket knives have been featured on national media outlets including the WireCutter. In 2016 Dan decided to branch out and experiment with the website by reviewing watches, flashlights, and multi-tools. Today BladeReviews.com features a number of expert authors reviewing a wide range of daily carry gear. He is proud to write detailed long format reviews with original photography. The website remains largely independent with the vast majority of the products reviewed being purchased by Dan personally.

When he isn't writing knife reviews from his home in Southwest Florida, or talking about himself in third person, he enjoys practicing law, reading, fishing, cigars, and weight lifting.

Benchmade Nimravus 140BK Review

by Dan Jackson Leave a Comment

Last Updated: July 26, 2019

The Benchmade Nimravus is one of Benchmade’s original fixed blade designs. It has stood the test of time and remains popular to this day. A “Nimravus” is an ancient cat with large teeth. I’d say that’s fitting when you consider this blade’s profile.

Buy the Benchmade Nimravus at BladeHQ

Buy on Amazon

Benchmade has offered the Nimravus in a number of blade steels and colors over the years. Today I’m checking out a 154CM version that has been blacked out completely.

General Dimensions and Blade Characteristics

The Nimravus has a blade length of 4.5″, a total length of 9.45″, weighs 6.2 ounces, and is made in America. This is a lightweight tactical fixed blade. Generally, a tactical fixed blade is going to be primarily used as a utility knife, but it needs to be able to serve in a defensive role as well. The Nimravus has the ability to flex into both of those roles. The 4.5″ blade gives you plenty of options. This knife will get plenty of work done, but can also be used as a martial blade if necessary.

The Nimravus comes both tanto and drop point versions, and you can get it with a plain edge or partially serrated. I opted for the drop point with partial serrations. Partial serrations can be handy for cutting rope and other fibrous materials, and it doesn’t dull as quickly as a plain edge, which can be helpful for use in the field when you may not have ready access to a knife sharpener.

My drop point blade has been given a high flat grind. The blade gets thin behind the edge, and this knife can assist with food prep, baton smaller pieces of wood, and take care of the myriad of small tasks that crop up in the out-of-doors. There is a partial swedge, that is mostly for decoration. The tip is fine and must be used carefully.

My blade has been coated in BK1, Benchmade’s proprietary poly-ceramic coating. BK1 is tough stuff, but it does show wear. Personally, I’m not a big fan of blade coatings, and would prefer to see Benchmade offer this knife in a stonewashed or satin finish. Especially since this knife is offered in stainless steel.

Speaking of stainless steel, my Nimravus came in 154CM. 154CM is the same workhorse steel that Benchmade uses on their Griptilian. It’s an excellent all-round steel, exhibiting good edge retention, corrosion resistance, and easy sharpening. This is a proven steel that is a good choice for this smaller fixed blade knife.

Handle and Ergonomics

The Nimravus is a full tang knife that has two hard-anodized aluminum handle scales. Handle construction is simple and neat. The scales are fastened to the handle with large torx hardware. Everything has been meticulously finished. The edges of the handle are chamferred and sit slightly proud of the aluminum scales. The scales themselves are deeply textured for traction.

This is a very grippy knife. The handle scales provide excellent grip, there is a large finger choil to keep the knife securely in hand, and there is a row of toothy jimping. I find the jimping too toothy without gloves. It digs into the pad of your thumb, and can be uncomfortable. Thankfully, the aluminum handles have been milled so you can hold the knife in a pinch grip. I find that to be more comfortable.

The balance point of the knife is right behind the finger choil. It gives the knife a neutral feel and hand and helps the Nimravus feel fast and balanced.

Rounding things out is a metal pommel with a hole for a lanyard. While it isn’t designed to be a glass breaker per se, this pommel could be used to break some glass or as an impact device.

Sheath

The Nimravus a sturdy nylon sheath with a kydex insert. The sheath offers several methods of attachment and you can remove various straps and connections to modify the knife as you like, however, I much prefer the optional kydex (hard plastic) sheath.

As far as nylon sheathes go this one is top notch, but the durability of the kydex sheath is hard to beat. Keep in mind that it’s a $40 option, which may seem pricey but I assure you that it is money well spent if you are going to seriously carry this knife. In a perfect world I’d like to see this come with the knife.

A final thing to note about the nylon sheath is that it comes MOLLE compatible. For those that use MOLLE (a system of attaching gear to yourself and your equipment) this is a nice feature that you don’t find with a lot of sheathes and it is worth taking a moment to mention.

Benchmade Nimravus Review – Final Thoughts

The Nimravus is a lightweight and capable knife that could fit the role of a large EDC or tactical blade. One thing that I may not have communicated through the review is the quality and level of fit and finish. This knife is well built. The blade is thinly ground, the balance is good, and the finish is everything you would expect from Benchmade. This is a durable blade and a convenient size to get real work done.

Here is the Nimravus next to my Ka-Bar BK-16, a more inexpensive tactical fixed blade:

It is lightweight enough to be a backup blade, but it’s got enough length on it that you could use it as a primary field knife or tactical option. For those seeking a piece of Benchmade history, or simply a good fixed blade knife, the Nimravus is well worth considering.

No products found.

If you would like to buy a Benchmade Nimravus, I recommend purchasing it at Amazon.com or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Cold Steel AK-47 Review

by Dan Jackson 6 Comments

Last Updated: February 22, 2018
The AK-47 rifle was designed by Russian Gunsmith Mikhail Kalashnikov in 1946. These guns were designed to be simple and rugged, and for these reasons the AK-47 design has enjoyed much popularity for over 60 years. The Cold Steel AK-47 was designed with similar intentions. The original Cold Steel AKs were solid knives, but they received some severe criticism about their weight and durability.

Buy the Cold Steel AK-47 at BladeHQ

Buy on Amazon

A second generation of the knife has appeared on the scene and both AKs has received a complete overhaul with a new beefier Triad lock, a slimmed down handle and a solid aluminum glass breaker / striker to replace the old pommel made of Grivory, a type of engineered plastic from Switzerland, that was the subject of many complaints. It seems that Cold Steel has given us an entirely new knife so I am interested to see how the second generation of measures up with a Cold Steel AK-47 review.

General Dimensions and Blade Details

The full size Cold Steel AK-47 has an overall length of 9″, features a 3.5″ blade, and weighs 5.5 ounces. This is a large folder, suitable for work as a tough EDC knife and perhaps suitable in more tactical / self defense roles.

The AK-47 has a large clip point blade. What I find especially attractive about this knife is that it is pretty much all belly. From the choil to the tip, the blade arcs out providing tons of practical space to get work done. Speaking of tips, the tip is reinforced with a swedge, and allows for excellent penetration while still being fairly durable. Furthermore, the inclusion of a high hollow grind makes for a great slicer. This is a well thought out and functional blade design, that works well in a wide variety of situations.

Originally, this knife was offered in AUS-8 steel with a teflon blade coating. That’s the version shown in the pictures. In 2016 Cold Steel upgraded their entire line, and now their premium blades all come in CTS-XHP. The previously teflon coated blades now come with a black DLC coating. While this increased the price of the knives, the upgrades are well worth it. CTS-XHP is a superior steel, and DLC coatings are the best in the business. That, combined with this knife’s excellent deep hollow grind, make it a capable slicer.

Handle, Ergonomics and Pocket Clip

The handle on the AK-47 is completely linerless, and features thick slabs of G10 that bolt into an aluminum backspacer. Some people (myself included) would immediately question the strength and durability of a linerless folding knife handle. I can assure you that the handle design is extremely solid. These knives were made to take a ton of abuse, and I can’t make the G10 budge a millimeter, even when pushing on the handle with all my strength. Everything is very well finished, with all the corners rounded off and the parts lining up perfectly.

The AK-47 feels great in hand. The knife was designed to provide an extremely secure grip, and to maximize reach. Unlike say, the American Lawman, you are not going to be able to easily choke up on this handle, but if you need to use the knife for a lot of slashing, it’s going to be almost impossible to take it out of your hand. The G10 is exceptionally grippy, but I will say that the thumb ramp is pretty smooth. The design couple probably benefit from some better jimping. However, because of the way the handle is shaped, I really don’t see the absence of jimping as a huge deal. It is going to be nearly impossible to slide forward on this knife.

The it is also worth mentioning that the AK-47 features an exaggerated pommel. This time the pommel is made of 6061 aluminum and is a big step up from the old plastic version. Not only is it light and strong, but it serves as a solid anchor point for the handle screws. This is what allows the knife to be linerless and so lightweight. Naturally, this pommel could be used as a glass breaker, a hammer, or some sort of non-lethal defensive option.

Rounding out our handle is the pocket clip. Cold Steel actually gives you two pocket clips; one for either side. The position of clip doesn’t allow for deep carry, and is instead optimized for easy of deployment. Also, this knife only allows for tip up carry. I have found retention to be very good with these clips, with the only downside being that the strong clip and rough G10 can tear up your pockets a little. Despite these perceived negatives I have found this to be a very sturdy and reliable clip. The AK actually carries really well for its size and the strong clip keeps the knife in place.

Deployment and Lock

To open the knife, the AK-47 utilizes a thumb plate and phosphor bronze washers. The thumb plate allows for ambidextrous opening of the knife. It is possible to flick this knife open, but it takes some skill and wrist action, because the backspring for the lock requires a good amount of force to overcome. If you really want to open this knife fast your best bet is to use the thumb ramp as a wave feature. By far this is the easiest way to quickly and consistently open the knife.

Now arguably the biggest change between this AK-47 and the old version is the brand new Triad lock. The Triad lock is a type of modified lock back designed by Andrew Demko. It includes beefier hardware and a stop pin, so force gets placed on the pin instead of the locking mechanism. In practice the lock on this knife is extremely strong and is capable of withstanding repeated spine whacks, batoning, and other common torture tests. The only issue with the Triad lock is that sometimes the spring can be too strong to use the knife comfortably. I will say that once you get the hang of it, disengaging the Triad lock isn’t bad (it also gets easier as the knife breaks in).

AK-47 vs. the Recon1 or the American Lawman?

Chances are, if you are interested in the AK-47, you may also be interested in the Cold Steel Recon 1 or the American Lawman. If that is the case, I recorded a video where I do a detailed comparison of these 3 models that you may find useful.

If you still have any questions or are interested in another comparison feel free to leave a comment or contact me.

Cold Steel AK-47 Review – Final Thoughts

I was very by these new versions of the Cold Steel AK-47. It’s great to see how CS listened to feedback and responded with a highly improved knife. In fact, since I originally published this review in 2011, Cold Steel continued the upgrade path and bumped up the blade steel from AUS-8 to CTS-XHP. A solid knife has kept getting better and better.

The relatively lightweight design, the improved handle and lock, the better pomel and pocket clip – it’s all been fixed up, and still at a good price. In the past, people would gripe about the the cheap AUS-8 steel, but now that the steel has been upgraded there is little to complain about. Some wont care for the aggressive styling of the AK-47 design, and for those folks I might recommend the American Lawman or the Recon 1.

Cold Steel AK47 Folding Knife, Black 58TLCAK

Blade thickness: 3.5 mm
Blade length: 3 1/2 inch
Steel: carpenter CTS xhp alloy with DLC coating

I recommend purchasing the Cold Steel AK-47 at Amazon and BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

ESEE-3 Review

by Dan Jackson 22 Comments

Last Updated: July 14, 2019
ESEE Knives specializes in outdoor fixed blade knives designed to take a beating and perform in a number of environments. Something special about ESEE knives is their no questions asked warranty that covers everything but rust. If anything happens to your knife through use or misuse, ESEE will replace it – no questions asked. This is great for a hard use tool because these knives aren’t cheap.

Buy the ESEE-3 at BladeHQ

Buy on Amazon

The ESEE-3 is one of ESEE’s smaller knives designed for anything from general field and utility work, to use as a full on survival knife or bug out bag blade. These knives (like all of ESEE’s offerings) have been proven in their jungle survival training courses. If you are looking for a smaller survival knife, or simply want to add a versatile fixed blade to your system, the ESEE-3 could be an excellent choice.

General Dimensions and Blade Details

The ESEE-3 has a total length of 8.31″, a 3.88″ blade and a weight of 5.2 ounces without the sheath (9.3 ounces with the sheath). This is a great all purpose size and a lightweight carry for such a strong knife. Could see the ESEE-3 doing great in a variety of scenarios, from a day hike to life on a ranch.

The ESEE-3 is of full tang construction and comes powder coated in black or desert tan. This makes the knife both strong and durable. The blade is a drop point shape and features a full flat grind, excellent for slicing, and batoning. The point is reinforced on which is almost critical for use as a survival blade but it also serves well in defensive scenarios. I looked at the plain edge version although ESEE offers this knife in a combo edge as well.

The ESEE-3 is made of 1095 high carbon steel. 1095 is a durable tool steel that is very good choice for survival knives because it is easy to sharpen, holds a good edge, and doesn’t chip under hard use. It’s a high carbon steel, not a stainless steel, so one issue with 1095 is that it will rust if you aren’t careful. You must oil this knife. Something as simple as WD-40 will be adequate although some prefer specialized knife and gun oils.

Handle and Ergonomics

The handle scales on the ESEE-3 are made of micarta. They are fixed onto the tang with 3 allen bolts. The handle scales are nicely milled and rounded. They provide good grip and the knife feels good in the hand with no noticible “hot spots” after use. The level of fit and finish on ESEE knives is very high, and one way to confirm that is by examining how the handle and the tang meet together. Examining the handle and tang on the ESEE-3 reveals that everything is flush with no edges or gaps. This is a nod to the high quality control and production values ESEE adheres to. The overall length of the handle is very adequate, even for larger hands. For a knife that is meant to be used, a large and comfortable handle is very important and ESEE did a great job with the handle on the ESEE-3.

The pommel (butt) of the ESEE-3 is pointed and can be used as a glass-breaker. This is a cool little addition that I may never need but like to have. Naturally, it’s good for breaking glass but it is also as a potentially non lethal way to use the knife (although I think there is still great potential to seriously injure someone with it – be careful). There is also a lanyard hole drilled into the pommel which is essential for heavy chopping and other hard use tasks.

Sheath

The sheath on the ESEE-3 is also very well done. The standard sheath is made of molded kydex and has a boot clip. An optional MOLLE adapter is made of cordura and provides the option to mount the sheath with a MOLLE system. When you secure the knife in the sheath there is a nice snap as it fits together. There is a retention strap and a elastic cover which is used if you want to mount the sheath for upside down carry. There is a small drain hole at the base of the sheath which helps keep your blade dry (especially important with that 1095 steel).

ESEE-3 Review – Final Thoughts

The ESEE-3 is a very heavy duty and high quality fixed blade knife. If you are looking for something on the smaller side, I think the “3” combines a light weight with a lot of utility. That blade has a lot of belly and the full flat grind is always nice. I could see the ESEE-3 performing well as an EDC knife (if you can swing carrying a fixed blade), a tactical knife, a camp knife, a hunting knife or as part of your gear for bushcraft and wilderness survival.

I love how the ESEE-3 has been built in the USA to very high tolerances and is backed by one of the best warranties in the industry. I’m not sure I can say this knife is an outstanding bargain, but you will definitely get what you pay for. As long as you don’t lose the knife, or leave it in a bucket of salt water, the RC-3 will serve you well for the rest of your life.

ESEE Knives ESEE-3MIL-P Military Plain Black Edge / w Green Canvas Micarta Handles

Overall Length: 8.31", Blade Length: 3.875"
Blade Material: 1095 Carbon Steel
Handle Material: Canvas Micarta
Sheath: Olive Drab Molded Polymer
Made in USA

I recommend purchasing the ESEE-3 at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Benchmade 14210 Heckler and Koch Snody Review

by Dan Jackson 1 Comment

Last Updated: November 29, 2019
For those looking for a rock solid edc knife with a sub 3″ blade, the Benchmade 14210 may be just the ticket. This knife is part of Benchmade’s Heckler and Koch (HK) line, which is a partnership between the two companies where the knives are made by Benchmade and branded with HK insignia.

Buy on Amazon

A number of interesting designs have emerged from this line, all with a no-nonsense tactical feel. The HK 14210 is no different although this time Benchmade teamed up with custom knife maker Mike Snody to give us a really unique looking blade.

Purpose

For purposes of this review I am mainly examining the 14210 from an EDC knife standpoint. With a blade just under 3″ this knife could work well in areas requiring a smaller knife that doesn’t compromise strength and performance. I think the 14210 could function as an emergency tactical knife as well due to its stout design.

General Dimensions and Blade Characteristics

The 14210 has a blade length of 2.95″, an overall length of 6.80″ and a weight of 3.08 ounces. 3 ounces for an EDC knife is very reasonable, and the 14210 has a pleasant “heft” to it in hand. For those interested in, say, a Benchmade Griptilian but are looking for something a little more unique and exclusive this knife might fit the bill. The 14210 uses the same 154CM stainless steel as the Griptilian. As I have mentioned in other reviews, 153CM is a very good high end blade steel known for it’s all-around performance and good corrosion resistance.

Where the Snody 14210 departs from the Griptilian is with its very unique blade shape. This is a modified drop point blade, defined by a long swedge, a slight recurve and a hollow grind. The recurve makes the smaller sized blade cut like a bigger knife and I was pleased with how razor sharp this knife came out of the box. I also liked the grey finish on this knife; it wears well and looks good.

Handle, Ergonomics, and Pocket Clip

This handle benefits from a simple design. It has an open back with pilars. It also has sculpted G10 handle scales over 420J stainless steel liners. The liners have been milled out and help keep the weight of this stout blade manageable. This is a very simple handle design but it feels very strong.

The ergonomics on the 14210 are very nice for a smaller blade. The G10 scales are sculpted and a pattern of lightly textured lines run down the length of the blade. This texturing could be improved to provide a better grip, but I think it’s fine for most EDC tasks. There is a nice thickness to the handle and the edges of have been smoothed for a more comfortable grip. There is a large thumb ramp on the top of the blade with very aggressive jimping. That thumb ramp works really well with the shallow choil, providing excellent control over the knife. While this isn’t the most innovative handle shape I have seen, it certainly does the job here.

The pocket clip is a simple, unbranded Benchmade clip finished in a flat black. This is the “arrow” clip common on a lot of Benchmade’s knives. The clip allows for ambidextrous tip up carry and is retained with 3 sturdy screws. The retention is good and the clip is mounted high so that the blade rides low and unobtrusively in your pocket. All in all I am very pleased with this clip.

Lock and Deployment

The HK 14210 has Benchmade’s patented axis lock technology. The Axis lock is wonderful and it works flawlessly here. My deployment was a little stiff out of the box, but after breaking the lock in a bit it has really improved the deployment. The blade is fairly thick and heavy so it really builds some momentum and flings the blade out. I really feel that with a knife like this, you really don’t need an assisted or automatic knife. One handed opening is fast and easy, and it’s just as easy to close this knife one handed as well. The fast deployment and the axis lock are major features of the knife.

Benchmade 14210 Review – Final Thoughts

The 14210 is a great folding EDC knife with a sub 3″ blade. 154CM steel, a rock solid handle, smooth deployment and solid axis lock all make this a great knife to consider carrying. The size and weight are other pluses that make this a great EDC option. I find the axis lock and full liners to make this knife extremely durable. The overall quality and attention to detail created an extremely loyal following for the Benchmade HK 14210.

Benchmade 14210 Heckler & Koch Snody Design Axis 3.4in. Plain Edge Blade Tactical Folding Knife

Lengths: Blade - 2.95in., Overall - 6.8in., Closed - 3.85in.
Blade Material: 154CM. Plain Edge. Handle Material: Aluminum
Lock: patented AXIS locking mechanism. Black G10 Handle Scales.
Modified Drop-Point with Recurve and Dual Thumb-Studs.
Double 410 Stainless Steel Liners. Weight: 3.08 oz.

Editor: I recommend buying the Benchmade 14210 at Amazon. Thank you for reading.

Zero Tolerance 0300 Review

by Dan Jackson 10 Comments

When Zero Tolerance first came on the scene the 0300 is one of their knives that really caught my eye. The graceful curves reminded me of some deep sea mammal while the construction reminded me of a semi truck. So I wasn’t surprised to learn that the 0300 was a collaboration between Ken Onion and the Strider Knife Corporation. Ken Onion is known for making a lot of really nice designs for Kershaw (and now CRKT) and Strider is known for making some of the toughest folders in the world. When you get two powerhouses like this in the same room working on a knife that is made in the USA with the fit and finish Kershaw is known for – well, I start to pay attention.

Before we go forward I need to say that “0300” is used to designate the coloration of the knife. All the knives in the 0300 Zero Tolerance line (which include the 0300, 0301 and 0302) are identical except for the color schemes. Pictured in this review is the black on black 0300. The ZT 0301 has a Forest Green handle and Tiger Striped blade finish and the ZT 0302 has a Coyote Brown handle with a Tiger Striped blade finish. All 3 knives are made in the USA.

General Details and Blade Dimensions

The size and heft of this knife are the first things you notice. The 0300 has the profile of a bulldozer and it is incredibly stout. The total length is 9″, the blade is 3-3/4″ and the weight is a solid 8.6 ounces. This is a heavy knife and the weight may deter some people from wanting to carry it. I’ll admit, it’s not my ideal EDC and this is definitely a knife that you don’t forget that is in your pocket, but I have carried it no problem with a sturdy pair of shorts or jeans. I feel that whether the knife is “too heavy” is up to you, so I’m not going to pass judgment in that regard.

The blade is a modified drop point, marked by Ken Onion’s signature styling. It features a high flat grind, and a partial swedge near the top. What I really like about this knife is the big belly on the blade. This is great for utility tasks. The blade steel is thick (4mm) and it holds the thickness all the way to the tip. This knife wasn’t designed for stabbing, it was designed to hold up to hard use tasks. There is a nice subtle recurve for enhanced slicing power and the Zero Tolerance logo and various other insignia has been laser etched onto the blade.

The steel on the 0300 series is a large piece of S30V. For those unfamiliar with S30V, it is one of the finest knife steels available, and it’s been this way for a number of years now. More expensive steels have arrived on the scene but it’s really tough to match the combination of ease of sharpening, edge retention and corrosion resistance that S30V is known for.

The blade has been further treated with a Tungsten DLC (Diamond Like Carbon) Coating. This is a high quality blade coating that will hold up a lot better than more inexpensive painted coatings. The tiger stripes on the 0301 and 0302 are really killer and quite unique in the production knife world.

Handle, Ergonomics and Pocket Clip

The handle of the 0300 is really well done. As far as construction goes, on one side we have textured G10 over a stainless steel liner. The other side (the lock side) is made of a single piece of titanium. There is a G10 spacer between the two sides and everything has been screwed together. Everything lines up flush, and it’s all been beautifully finished with no rough edges or anything of that nature.

Ergonomics on the 0300 are excellent. The handle has the same wide profile of the blade and it feels very satisfying in the hand. The flipper doubles as a choil and there is a generous amount of jimping on the thumb ramp and pommel. Both sides of the handle are machined with a very aggressive textured pattern. All of these elements combine to provide superior grip and response. I am not worried about my hand slipping forward on the knife at all. It is very comfortable to hold this knife, with zero hot spots. The 0300 is a large knife so I expected good ergonomics, but the designers really went out of their way to cover all of the bases. I am very impressed with the ergonomics of this knife.

The pocket clip of the 0300 is straight out of the Kershaw parts bin. I have an almost identical clip on my Skyline (and a number of other Kershaw knives). That is ok though, because this is a proven clip design, it’s simple, and it totally works. This is a very stiff clip, which works well with the flat and wide profile of the knife; it will hold the knife in place anywhere in your pocket. Heavy knives have a tendancy to sink down to the corners of my pants pockets, which can interfere with some of the other gear I carry (like my flashlight). The stiffness of the 0300’s clip avoids that issue.

Another great thing about the clip is that it is mountable on all 4 corners of the knife. This gives you the freedom to carry your knife the way you want to. I also like how the clip has been blackened. All in all this is a very secure and discreet carry, I am very pleased with how well everything works considering it such a heavy knife.

Deployment and Lock-up

First of all, the 0300 is an assisted opening knife, making use of Kershaw’s SpeedSafe assisted opening technology. With the 0300 you have the option of either deploying the knife with the thumbstuds or flipper. This is really cool because the thumb studs actually work as the stop pin here, and often it’s very difficult to get at the thumbstuds on this type of knife. For me, I had no problem – even left handed, getting at the thumbstuds. Either way you want to deploy the knife, the SpeedSafe quickly engages and moves this big blade out with a good amount of speed. It’s a fun and satisfying knife to open and the SpeedSafe is a proven assisted opening mechanism. Of course, you could always disable this feature if you preferred 100% manual operation.

Deployment is not only fast, but it’s very smooth. The 0300 uses a pair of very large phosphor bronze washers. These low friction washers are very smooth. Also, the pivot pin is very big. It’s actually a large bolt that requires a 3/8″ driver to loosen it. This may be problematic in the field, but everyone owns a 3/8″ driver so for my use it wasn’t an issue. I think it’s a pretty cool look and is appropriate given how overbuilt the rest of the knife is.

The lock on the 0300 is a titanium frame lock. This is a very sturdy style of lock and ZT really put this one together correctly. As you can see, mine engages nice and early, with plenty of room to break in with use. It almost goes without saying, but there is absolutely no blade play in this knife. Despite the strength of the lock, it is still easy to disengage when you want to fold the knife up. A cool detail is that they included a Hinderer lockbar stabilizer (that dark circular portion) on the side of the lock. This handy feature prevents you from overextending the titanium frame lock, which could compromise the integrity of the knife.

Zero Tolerance 0300 vs. Zero Tolerance 0350

A common question a lot people have is whether they want the ZT 0300 or the smaller Zero Tolerance 0350. If you are one of those people, I made a video comparing the two knives.

Zero Tolerance 0300 Review – Final Thoughts

The ZT 0300 is an incredible knife. The build quality is superb, the selection of materials is top notch and the design and features are outstanding. The knife retails for around $230, which is actually an outstanding value when you consider that this knife is very similar in both design and build quality to several Strider knives selling for $400-$500. I don’t think you will be able to find another folding knife as well built and feature rich as the ZT 0300 in the $230 range.

Perhaps the biggest complaint would be the weight. It is not a light knife. However, if you want a large, beautiful, hard use folder with premium materials made in the USA then I can safely recommend the 0300 or any of it’s siblings.

I recommend purchasing the Zero Tolerance 0300 at Amazon.com.

[easyazon-block asin=”B0017SC9H6″ align=”center”]

Spyderco Caly 3 Carbon Fiber Review

by Dan Jackson 18 Comments

Last Updated: August 7, 2019
Hands down the best part about operating a website like this, is the excuse to play around with bad ass knives like the Spyderco Caly 3.5 in Carbon Fiber. This special version of the Caly3 uses exotic Japanese laminated steel and carbon fiber handle scales to give the original Caly3 an extra touch of class. The original Spyderco Caly (short for Calypso) was introduced in 1998 and featured a 4″ blade and micarta scales. Spyderco has refined the knife over the years in their quest to get this knife to become “part of the hand”.

Buy the Spyderco Caly 3 at BladeHQ

Buy on Amazon

Before I launch into the details of this review let me just say, this knife is really nice. I got one mainly as a collectible but this thing is built like a bank vault and Spyderco considered every detail so if you intend to use the knife for Every Day Carry (EDC) it will perform. My first impressions leave me with nothing but good things to say about this blade although I will do my best to find some weaknesses for those seeking the dirt on this high end production knife.

General Dimensions and Blade Specifics

The Spyderco Caly3 CF has a total length of 7 inches, a blade length of 3 inches, weight of 3 ounces, and is made in Japan. The knife is slender with a total thickness a hair under 3/8 of an inch. These strike me as ideal dimensions for an EDC knife and I think EDC is exactly what Spyderco had in mind when they put together the Caly3. It also makes a handsome gentleman’s folder.

The blade on this knife is very interesting. It’s a standard Spyderco leaf shaped blade with a thumb hole for deployment and a long curving belly for plenty of cutting space. The blade stock starts at 1/8″ thick and it tapers down to a fine, razor sharp point. The entire blade has been given a beautiful full flat grind and a 12.5 degree edge.

The blade steel Spyderco selected for the Caly3 CF is ZDP189/420J2, a Japanese laminated steel. This is accomplished by sandwiching a piece of ZDP189 between two pieces of 420J2. The 420J2 outer layers are incredibly tough. 420J is commonly used by high end knife manufacturers for liners due to the strength and corrosion resistance of the steel. The cutting edge is ZDP189, an ultra high end steel that is extremely hard. This steel gets incredibly sharp and holds it’s edge very very well. The problem with ZDP189, is that it’s extreme hardness makes it difficult for some to sharpen.

Another potential problem with the 420J2/ZDP189 combination is that 420J2 scratches relatively easily. That said, 420J2 is very stain and corrosion resistant, so the blade is less likely to rust. For those considering the Caly3 CF for EDC, scratching will happen with any knife. Arguments on the pros and cons of the 420J2 outer layer could go on for days, so I’ll just leave it at that.

And on the subject of scratching, one concern with this knife is that the tang rubs up against the knife when deploying and you get very fine circular rubbing marks on the tang. I’ve noticed that this doesn’t only happen with my knife, others have reported it too, and from a collectors standpoint it’s a bit problematic. Perhaps these marks can be carefully buffed out; I will update the review if I try this.

A very cool result of this laminated process is that you can see where the the 420J2 ends and the ZDP189 begins. At first glance, it almost appears as if the knife has been given a saber grind, but upon closer inspection you can see that it is in fact one full flat grind.

Handle, Ergonomics and Pocket Clip

The handle has steel liners (that have been painstakingly and attractively milled out to reduce weight) and polished carbon fiber scales. The carbon fiber is lightweight and handsome however it doesn’t provide the kind of grip a textured G10 handle does. The handle does feel a little slippery when wet. Again I think if Spyderco was going for all out utility they would have selected a different handle material (they did in fact do that for their regular Caly3.5). Even with the lightweight carbon fiber the handle has a little heft to it.

As far as ergonomics are concerned, the knife has excellent jimping on both the thumb ramp and the finger choil. The design of the thumb ramp and choil make the knife fit very well in the hand. Despite the absence of textured handle scales when you are gripping the knife you feel in control, largely due to the excellent ergonomic design. The carbon fiber scales have been radiused and there are no sharp edges in the palm. I think Spyderco came very close to their goal of making the knife an extension of the hand.

The pocket clip is simple yet elegant. It is a single blackened piece of wire that is held in place with a star bolt. I like this style of clip for smaller knives because it is plenty strong and very discrete. Spyderco designed the Caly3 for tip up carry and the clip is reversible. The knife rides low in the pocket and the clip has good retention.

Deployment and Lock

The Caly3 CF uses the signature Spyderco thumb hole for blade deployment. I have found the deployment of the Caly3 to be slow. There is quite a bit of blade retention and it appears to be impossible to flick open. Maybe I need to loosen my pivot screw up? I’d love to hear some opinions. When you do open the knife it clicks in place very forcefully with a nice snap.

The Caly3 is a lockback knife and the lockback is positioned in the middle of the handle. There is absolutely zero blade play and it almost feels as if you are working with a fixed blade knife. This is one of the most solid locking knives I have handled and I am very impressed by the way this knife engages.

Spyderco Caly 3 Carbon Fiber Review – Final Thoughts

The Spyderco Caly3 CF is one hell of a knife. Beautiful materials, rock solid construction and an amazing attention to detail make this a near perfect EDC option. However, the steep price, slow deployment and non-textured handle scales may make people think twice about making this their go to blade. I will say that if you end up deciding on a Caly3 CF, you won’t be disappointed.

Spyderco Caly Prestige Knife with 3.40" ZDP-189 Stainless Steel Blade and Black Carbon Fiber Handle - PlainEdge - C144CFPE

Iconic Design: The Calypso is one of the classic mainstays that spawned numerous variations and converted legions of knife buyers to the benefits of flat-ground, thick leaf-shaped blades.
More To Love: Available now in a premium variant, is the Caly 3.5 with a ZDP-189 blade and carbon fiber handle. The Caly 3.5 combines beauty and functionality into a new Spyderco classic.
Superior Blade Steel: The leaf-shaped blade is made of three layers of steel. The core is high carbon ZDP-189 Japanese powdered steel, the outer laminated layers are softer, pliable 420J2 steel.
Pocket-Friendly: It comes with a gray carbon fiber handle and a mid-positioned back-lock. Its low-seated wire clip designed for right-hand deep-pocket, tip-up carry.
Ergonomic: Great Ergonomics means more control over the cutting edge. The Caly 3.5 accomplishes this with a substantial finger choil located where the handle and blade meet.

I recommend purchasing the Caly 3 Carbon Fiber at Amazon or BladeHQ. Thanks for checking out the review.