Dan Jackson

Dan is the creator of BladeReviews.com. He founded the site in 2010, and for the first 5 years Dan wrote all of the reviews and recorded all of the video reviews. He grew up using pocket knives, and the decision to start the website stemmed from his fascination of all things sharp combined with a deep passion for writing. At this point he has personally reviewed almost 300 knives of all shapes, sizes, and price points. He is widely recognized as an authority on daily carry knives and has consulted with knife companies on product design and has been featured on national media outlets including the WireCutter. In 2016 Dan decided to branch out and experiment with the website by reviewing watches, flashlights, and multi-tools. Today BladeReviews.com features a number of expert authors reviewing a wide range of daily carry gear. He is proud to write detailed long format reviews with original photography. The website remains largely independent with the vast majority of the products reviewed being purchased by Dan personally. When he isn't writing knife reviews from his home in Southwest Florida, or talking about himself in third person, he enjoys practicing law, reading, fishing, cigars, and weight lifting.

At this point he has personally reviewed almost 300 knives of all shapes, sizes, and price points. He is widely recognized as an authority on daily carry knives. He has consulted with knife companies on product design and his opinions on pocket knives have been featured on national media outlets including the WireCutter. In 2016 Dan decided to branch out and experiment with the website by reviewing watches, flashlights, and multi-tools. Today BladeReviews.com features a number of expert authors reviewing a wide range of daily carry gear. He is proud to write detailed long format reviews with original photography. The website remains largely independent with the vast majority of the products reviewed being purchased by Dan personally.

When he isn't writing knife reviews from his home in Southwest Florida, or talking about himself in third person, he enjoys practicing law, reading, fishing, cigars, and weight lifting.

Chris Reeve Knives Small Sebenza 21 Review

by Dan Jackson 23 Comments

Last Updated: June 2, 2019
I don’t think many people get into the hobby of collecting knives with the idea that one day they will buy a pocket knife that costs hundreds of dollars.

Well, at least I didn’t start out my little edged adventure with the thought of purchasing a $300+ knife. However, as I wandered down the rabbit hole, and became further consumed by my blade obsession, justification for more expensive knives became easier to find. Any reservations I once had about owning a $350 knife soon went out the window.

Buy the CRK Sebenza at BladeHQ

So that takes us here. You and me, about to discuss the Small Sebenza 21 made by Chris Reeve Knives (CRK) which retails for right around $350. In many ways this review is a challenge because for such an expensive knife, a lot of people have already given their opinion on it. It’s a very well known blade with an extremely loyal following.

But hey, it’s just a knife so I’m just going to treat it like I would any other, and try to provide you with a fair and honest review…

General Dimensions and Blade Details

The small Sebenza 21 is the little brother to the large Sebenza 21 (no surprises there, right?). This knife has an overall length of 6.9″ a 2.94″ blade and a weight of exactly 3 ounces. This is a great size for EDC and that is exactly what this knife was designed for – to be a high end edc knife.

The blade is a classic drop point shape. The knife has been given a high hollow grind (a very shallow one) and the spine has been rounded, a very elegant touch. Blade stock is 1/8″ thick, which is nice and stout for a smaller blade like this. The blade manages to maintain this thickness well, eventually tapering down to a sturdy point. Being a classic drop point there is plenty of belly for your EDC tasks, and the entire blade has been given a nice durable stonewashed finish.

Blade steel on my Sebenza is the tried and true S30V. If you are already reading a Sebenza review I think an in-depth discussion of S30V is probably unnecessary, but suffice it to say that this is a very fine steel with excellent all-around properties including good edge retention and corrosion resistance. However, my Sebenza was made in 2009. As of mid-2011 Chris Reeve has started making Sebenzas in S35VN, a slightly upgraded version of S30V. This is certainly a welcomed addition, and it’s great to see how CRK continues to refine and upgrade their knives.

Handle, Ergonomics and Pocket Clip

One of the great draws to this knife is that the handle slabs have been made entirely from titanium. Indeed there are two thick pieces of 6Al4V titanium here and they have been given a nice sandblasted finish. This finish will show wear, and I see some very light scratches on mine, but if you wanted to you could have the handles sandblasted again for a factory fresh finish. As far as construction goes, this is a minimalistic free-flowing design, and everything has been bolted together for easy take down.

That said, if you want to get fancy, CRK can give you fancy, and this knife is available with a lot of interesting hardwood and micarta inlays. CRK also offers these knives with a huge variety of different graphics engraved into the handle. This adds an additional layer of collectability to the knives.

There is nothing too complicated with the ergonomics of this knife either. But again, the handle just works. There is a nice thumb ramp with good functional jimping and a very shallow choil is also present. For a smaller handle it fits me pretty well; I’m able to get a 4 finger grip without any trouble and I can easily control the blade.

The pocket clip is pretty special. First of all, it is made of titanium and secures with a single bolt. It’s a very secure fit so I’m not complaining. More importantly this clip works – and it works very well. It has a kind of double retention system, which in a way acts like two pocket clips at once (a “double-dip” clip? Just came up with that one…). It’s difficult to describe so take a look at the pictures (and video) to get a better idea of what I am talking about, but in short it makes for a very secure fit into your pocket and a nice comfortable carry.

Lockup and Deployment

The Sebenza uses either single or dual thumb studs for deployment. My particular model has a single thumb stud (or thumb “lug” as they like to call them in the Sebenza circles) set up for right hand deployment. CRK does in fact make versions with double thumb studs and they even make an entirely left handed version of the knife. My thumb stud came with blue anodizing, and while the blue anodizing provides a striking contrast, it does wear off with use. Kind of a bummer, but what can you do.

Deployment is slow, smooth and extremely purposeful. This is not a knife that you can flick out easily, nor would you want to for fear of compromising the titanium framelock. The smoothness of the deployment is near legendary, and it’s not uncommon for people to compare the deployment of everything else to the Sebenza.

The Sebenza features a Chris Reeve Integral lock – or a “frame lock” if you prefer. This was the frame lock that started them all, as Chris Reeve designed the lock for this knife. An exercise in absolute minimalism, the lock is part of the handle and it engages with a very satisfying and forceful “click.” To me this kind of lock oozes strength and security and lockup is very strong.

Now, I need to say there have been a report or two that this lock has occasionally failed under spine whacks, but to be honest (and as respectful as I possibly can), I don’t really care. (I was never into “spine whacking” and certainly wouldn’t subject that to a little EDC knife. I think for cutting tasks this lock is going to be plenty strong for pretty much everything you would put it up to.

Chris Reeve Knives Small Sebenza 21: Final Thoughts

The small Sebenza is an excellent all-around edc knife. Hand made in the USA, this is the ultimate combination of an intelligent design, premium materials, and American craftsmanship. The Sebenza oozes quality and is an incredibly simple design done right. It is no wonder that most consider the CRK Sebenza the pinnacle of production pocket knives.

Perhaps the 900 lb gorilla in the room is the question, “is it worth the money?” Well, I think so, but then again I run a website entirely dedicated to cutlery, so perhaps I’m the wrong guy to ask. But really though, I hate answering this question.

Sure, you could just as easily carry a knife for a fraction of the cost. Lets face it, you don’t need a Sebenza to cut up a card board box, just like people don’t need a Ferrari to go from point A to point B, or a Rolex to tell the time – they buy these items because they want the best. In my mind this is a much cheaper thrill than a Rolex or a Ferrari so if you are someone who only wants the best, or someone who appreciates fine craftsmanship, or someone who has simply reached that point in your knife obsession where you have no where else to turn, then I think you will enjoy a small Sebenza.

Chris Reeve Knives Small Sebenza 21 – $350
from: BladeHQ

I recommend buying the Sebenza at BladeHQ or KnifeArt. If you purchase anything through any of the links on this website, I earn a small commission (at absolutely no additional cost to you) that helps keep the site running. Any support is greatly appreciated. Thank you very much.

Kershaw Volt II Review

by Dan Jackson 4 Comments

Last Updated: August 8, 2019
It has been too long since I’ve examined a nice budget EDC blade. This time around I picked up a Kershaw Volt II, and could immediately tell that I grabbed a real winner. First off, the original Volt is a true collectors piece. It’s not a particularly old design, but it’s a limited edition titanium framelock with a composite steel blade. It will to run you a few hundred dollars at least. And that’s if you can find one.

Buy the Kershaw Volt at BladeHQ

Buy on Amazon

Kershaw went in the opposite direction with the Volt II. Here they opted for everyday affordability with nice, but inexpensive materials. The two blades do share a lot of similarities, as they are both creations from designer R.J. Martin and have generally the same shape. The major differences are that the original Volt is much larger (1.75″ longer) and costs about 15 times as much as the Volt II. For right around $20 pretty much anyone can afford the Volt II, and to be honest I think you would be foolish not to. Lets take a closer look to see what I’m talking about.

General Dimensions

The Volt II has an overall length of 7″, a 3.125″ blade and weighs 3.4 ounces. This is a nice size for EDC and should be a fairly friendly looking carry regardless of where you live.

The blade is a drop point shape, with a small swedge and nice sweeping belly. The entire blade has been bead blasted, which is familiar territory for a lot of Kershaw’s small EDC blades (like the legendary Kershaw Skyline). The tip on this knife is very good, holding a good amount of steel all the way to the very end. Kershaw finished this one off with a high hollow grind and a nice smooth edge.

Blade steel is the very high value 8Cr13MoV stainless from China. My experiences with 8Cr13MoV have been very good. For the money, I really don’t think you can beat it. It is capable of taking a very nice edge and has good rust resistance.

Handle, Ergonomics, and Pocket Clip

The Volt II features full stainless steel liners with injection molded plastic scales. The plastic is actually pretty dense (Kershaw calls it Polyimide) and I am quite pleased with it. An attractive triangle pattern has been emblazoned over the scales and the liners have been lightly milled out. I’m sure some would prefer G10, but for price I am not complaining. I really like how the liners have been given the same blasted finish as the blade – looks real sharp. Rounding things out is an almost full backspacer made of the same Polyimide material as the scales.

Ergonomics on the Volt II are nice. First off, it is a smaller handle (~3.8″) so I found it slightly cramped with my larger hands. That said, I managed a full grip and liked how the thick and rounded scales felt in hand. There are two shallow choils and an integral guard to keep your fingers from slipping. A nicely jimped thumb ramp provide addition support on top. My only suggestion would be to make the handle a little longer to provide some extra room but I think for most people the ergonomics are going to work really well.

The pocket clip is a kind of funky looking Kershaw clip. Having handled a number of Kershaw knives I’m no stranger to their somewhat unconventional clips. As you can see this one is quite interesting. In practice, the clip works just fine and is not nearly as funky as some of the others I have run into. I would have liked to have seen it be a little bigger, but it’s discreet and offers a low carry. On the subject of carry, this is a chunkier folder with a thickness of about half an inch. For some, this may be a little difficult to carry. I don’t mind it but everyone is different. One last thing to note is that this tip allows for tip up or tip down carry but it is right side only.

Deployment and Lockup

The Volt II takes advantage of a nice flipper for deployment. This knife uses Kershaw’s Speedsafe assisted opening technology. This knife fires open hard with a really satisfying click. The flipper also doubles as a guard – a feature I have really come to appreciate with a lot of Kershaw designs. I’m also a big fan of the Speedsafe – Kershaw has done an excellent job with all of the assisted opening knives that I have handled. I predict that if you pick this one up you will spend way too much time playing with this one (at least I did).

Lockup is accomplished through a liner lock. This is actually a pretty thick lock bar and it locks up nice and early on my example. I noticed zero blade play and I love how the knife has come perfectly centered. A small amount of jimping on the lock bar makes this an easy one to disengage when you want to, but it still feels very secure in hand. For EDC tasks this lock will be able to handle it all.

Kershaw Volt II Review – Final Thoughts

Sometimes I get a knife in and the review just writes itself. I was impressed with the Volt II the moment it came out of the box, and I still haven’t put it down. If you want an EDC knife in the $20-25 this is a very strong option in my book. What really makes this one for me is the way it’s been put together. The fit and finish are phenomenal. The knife locks up nice and early, the blade is perfectly centered, deployment is smooth, the grinds are nice, the handle feels great – I could go on and on.

To me this is a great example of what Kershaw does best – putting together a rock solid EDC folder that everyone can afford. My only issue would be that I’d like to see an ambidextrous clip and perhaps a slightly larger handle. Aside from that the knife has exceeded my expectations in every way. I want to note that the Volt II is made in China, but the quality control is excellent. I would put the level of fit and finish above my Spyderco Tenacious and wouldn’t hesitate to recommend this to anyone interested in the knife, or in need of an inexpensive folder that can take some real use.

Kershaw Volt II Pocketknife, 3.25" 8Cr13MoV Steel Drop Point Plain Edge Blade, assisted opening Folding EDC, Liner Lock System

KERSHAW VOLT II POCKETKNIFE: An updated version of the original, the Volt II is a workhorse of a pocketknife. With the same versatile blade and handle style, now with upgraded blade steel and textured handle to make it even more capable on the job.
DROP POINT PLAIN EDGE BLADE: Made from quality 8Cr13MoV stainless-steel that offers excellent edge retention, strength, and hardness. The bead-blasted blade finish provides a non-reflective, matte surface.
GLASS-FILLED NYLON HANDLE: The lightweight, black glass-filled nylon handle has textured scales and finger contours for a comfortable, secure grip during use. Includes a reversible pocketclip for right, tip-up, left, tip-down carry.
DESIGNED WITH SAFETY IN MIND: Equipped with Kershaw’s assisted one-handed opening with the built-in flipper for fast blade release. Liner lock secures blade in place to ensure safety while handling.
SIZE SPECIFICATIONS: Blade Length: 3.25in. Closed Length: 3.9in. Overall Length: 7.1in. Weighing in at 3.3oz. Backed by Kershaw’s Limited Lifetime Warranty. Suitable for EDC, hunting, camping, and more.

Buy on Amazon

I recommend purchasing the Kershaw Volt II at Amazon or BladeHQ. Thanks for checking out the review.

SOG Ops Review

by Dan Jackson 10 Comments

Last Updated: September 6, 2019
For those in need of a sleek fixed blade tactical knife with a proven pedigree, the SOG Ops may be just the ticket.

Buy the SOG Ops at BladeHQ

Buy on Amazon

SOG describes the Ops as an evolution of their very popular SEAL Pup line of fixed blade knives. I wrote a SEAL Pup review a while back and was very impressed with this classic outdoors knife. Now that I have an Ops in hand I can say that there are some nice refinements that help this blade stand out from behind the shadow of it’s mighty predecessors. Lets take a closer look and see what the the Ops is all about.

General Dimensions and Blade Details

The Ops has a similar footprint to the SEAL Pup (and SEAL Pup Elite) with an overall length of 9.5″ a 4.85″ blade and a weight of 5.4 ounces. This is a great size for tactical and utility use. While we are on the subject of what this knife might be used knife for, it doesn’t strike me so much as a survival blade. I’m mainly drawing this from the blade shape, it seems much more purpose built for military and police use. Of course, your mileage may vary.

The curving blade is made from .185″ stock. This is a modified drop point design, and this unique blade shape features a nice recurve and long slender swedge forming a very capable tip. In my opinion this is a blade that was designed for penetration and slicing, and will not make a particularly good chopper. The recurve helps push material through the blade and aids in slicing tasks. The swedge enhances penetration while preserving the tip. SOG finished off the blade with a nice hollow grind and a beautifully ground edge.

You have your choice of either a plain satin finish or the Titanium Nitride (TiNi) coated version shown here. This coating will show wear with use but is a substantial improvement over a cheap teflon coating.

SOG used cryotreated AUS 8 stainless steel for the blade, a Japanese mid range steel that I’ve talked about at length. It’s a softer steel, so it won’t hold its edge forever, but for a smaller fixed blade I think AUS 8 was a good choice here.

Handle and Ergonomics

The handle on the Ops is exactly like the handle on a SEAL Pup (or Elite). The handle is made from glass-reinforced nylon (GRN). This is a very solid handle material giving the knife a pleasant amount of heft and a nice sturdy feeling. This is a handle designed to take a beating.

The ergonomics on the Ops are excellent. The handle is covered in medium texturing that provides good grip and response. The handle is formed with a series of finger grooves that accommodate my larger hands very well. One substantial difference between the SEAL Pup series and the Ops is the thumb ramp and aggressive jimping on the spine of the blade. This feature really locks your thumb in place, and in my mind, it completes the ergonomics on this knife. With your thumb locked up you can really control this knife for detailed tasks and it allows you to really dig into some of your harder cuts.

Sheath

The sheath on the Ops is just as nice as the knife itself. SOG started off with two thick pieces of kydex that have been riveted together with eyelets. The knife fits into the sheath with a snap and feels secure without being too difficult to remove. I didn’t notice any rattle but you can adjust retention to your level of preference. Topping things off, a small drainage hole has been drilled into the bottom sheath to help avoid corrosion.

Bolted onto the sheath is a belt loop and retention strap made of cordura and kydex. The retention strap secures the handle with both velcro and a large button strap. This portion of the sheath is removable and allows you to reverse the entire sheath for left side carry. If you aren’t a fan of belt loops, the eyelets allow you to mount a variety of attachments (such as MOLLE clips) or simply lash the sheath down. All in all this is a very high quality sheath that is designed to provide great blade retention and multiple carry options.

SOG Ops Review – Final Thoughts

All in all, the Ops is a solid piece of gear. This knife was made in Taiwan and the fit and finish is excellent. Honestly, I’m really struggling to find any kind of fault with the knife. Perhaps my only parting advice is that in my opinion this is a specialized knife designed mainly for tactical use. Some other ideas for the knife include home defense, something for the bug out bag or perhaps even hunting. Really though I think most people probably won’t find a ton of regular uses for a SOG Ops.

That said, if you are in the market for a fixed blade tactical I think it’s a very well built knife with a great sheath and a highly functional design.

SOG Specialty Knives & Tools M40K-CP SOG Ops Knife with Straight Edge Fixed 4.85-Inch AUS-8 Steel Drop Point Blade and GRN Handle, Satin Finish

Compact fixed blade tactical knife
4.85 inch blade made from aus 8 steel
Drop point tip
Recurved edge and large thumb scallops deliver unparallel control and a longer cutting length
Straight edge, fixed 4.85-inch AUS-8 steel blade has a drop point shape with a satin finish

Buy on Amazon

I recommend purchasing the SOG Ops at Amazon or BladeHQ. Thanks for reading.

Cold Steel Hold Out II Review

by Dan Jackson 22 Comments

Last Updated: August 23, 2019
Cold Steel has really been making a statement in 2011 with their new and improved lines of lightweight and ultra strong folders. Their updated series of Cold Steel Voyagers has really built up some buzz, and rightfully so. But keep in mind that the Cold Steel 2011 roster runs much deeper than that. Today I’d like to share another one of their light weight high value folders: the Holdout II.

Buy the Cold Steel Hold Out at BladeHQ

Buy on Amazon

General Dimensions and Blade Details

The Hold Out II sports a 4″ blade, has an overall length of 9″ and weighs 4.2 ounces. This folder could work as a large EDC or tactical folder. Cold Steel also makes a smaller version, the Hold Out III. This knife has a 3 inch blade and weighs a mere 2.5 ounces. This would make a really sturdy EDC option/emergency tactical.

The blade on the Hold Out II is 3.5mm thick and tapers into a nice fine tip. It’s a simple drop point design and has been given a full flat grind. Thanks to the offset tip there is a good amount of belly on this knife and the Hold Out works well for a variety of tasks. The edge is beautifully ground and out of the box sharpness on my knife was excellent.

Cold Steel selected AUS 8A for the blade material, a mid range stainless steel that they use on a lot of their folders. I like AUS 8 alright as it is easy to sharpen and it helps keep the cost down. That said, I often wonder if Cold Steel would consider upgrading to something like 154CM. It would add some cost but I’d love to see the option of slightly better steel for improved edge retention.

Handle, Ergonomics, and Pocket Clip

Modeled after Skean Dhu knives carried by ancient Scottish warriors, the Hold Out has a long and slender handle. The handle is a linerless design made of two thick pieces of G10 bolted into steel and aluminum backspacers. The G10 feels very solid and I can just barely flex the handles when pressing down hard on them. This is a strong and lightweight handle design that I can really appreciate – especially after lugging around some heavy folders.

Ergonomics on the Hold Out II are good. It’s a big handle so you have plenty of room to position your fingers in a variety of grips. The G10 is very rough and provides a lot of traction. There is a small choil and the knife has neither a hilt nor a thumb ramp. Fairly sharp jimping has been applied to the bottom of the handle and less aggressive jimping has been applied to the top. There is no lack of traction with this knife.

At first, the lack of a thumb ramp or really aggressive choils was seen as something of a negative. But I noticed that when you consider Cold Steel’s entire lineup of knives there are a ton of blades in Cold Steel’s catalog that have much more aggressive ergonomics. So instead of knocking the knife for this, I’m going to note that it’s simply different. I will say I love the look of this handle, and the overall look of the knife. It’s a sleek design. Crazy ergonomic features would definitely spoil the clean lines of this knife.

The pocket clip on the Hold Out II is excellent. This is a simple polished clip but it allows for ambidextrous tip up carry. It rides deep and provides a good amount of retention. I like the clip a lot.

Deployment and Lockup

Deployment of the Hold Out is accomplished through a large thumb stud. This thumb stud is not 100% ambidextrous, but it is reversible with a flat head driver. I need to first mention here that the Tri-ad lock requires a good amount of force to overcome the spring tension and get the knife open. With that in mind, at first I found the thumb stud to be kind of slick and it took quite a bit of effort to flick the knife open quickly.

As the lock broke in (and I got some practice) it became easier to open the knife. Today I can flick the blade open pretty much every time. I still think some improvements could be made to the thumb stud to catch your thumb a little better, but I was happy with the way the lock broke in and the knife ended up deploying.

The Hold Out II uses Cold Steel’s Tri-Ad lock, which is just a beast of a lock (and I discussed it in many of my previous Cold Steel reviews). In a nutshell, this is an improved back lock that is able to withstand a ton of force. I regard this as the strongest locking mechanism on the market. So naturally lock-up on this knife was rock solid with no blade play at all.

I noticed some reviews on Amazon where people were saying it was very hard to disengage the lock. It will take a little force, but as the lock breaks in it becomes much easier. Compared to my Cold Steel Spartan, this lock was a piece of cake.

Cold Steel Hold Out II Review – Final Thoughts

There is a lot to like about the Hold Out II. The gently sloping shape of the blade and handle has timeless appeal. I like the overall size and proportions and have no complaints with the strength of construction or the materials themselves. That said, I did find flicking the blade open to be difficult given the shape of the thumb studs and the powerful spring on the Tri-Ad lock. A version with upgraded blade steel would be really cool too (and I think it would sell well).

All in all, this is a solid offering from Cold Steel. For folks wanting something a little smaller I think the Hold Out III will be a very attractive option too. If you like rock solid folders, the Hold Out II is very deserving of your consideration.

Cold Steel 11HL Hold Out II Plain

Plain Edge
Blade Length: 4"
Handle 5" Long, G-10
Japanese AUS 8A Stainless
Overall length: 9"

Buy on Amazon

I recommend purchasing the Cold Steel Hold Out at Amazon or BladeHQ. Thanks for reading.

Spyderco Dragonfly II Review

by Dan Jackson 21 Comments

Last Updated: March 29, 2020

Back in the day, I didn’t think I would like the Spyderco Dragonfly 2. I’m a big guy, and tend to carry medium size folding knives. I always felt that I would be under-equipped with a small knife. Maybe it’s a macho thing, I really don’t know. I like a good size knife. Something I can use comfortably.

Buy the Spyderco Dragonfly 2 at BladeHQ

No products found.

So the thought of packing a massive 5-7/16″ folding knife with me that weighs a whopping 1.2 ounces wasn’t super appealing. That is, until I got my hands on the Dragonfly II. It took me about 2 seconds to realize how badly I had underestimated this little knife. It punches well above its weight, and is one of the best EDC knives on the market. I originally wrote this review back in 2011, and I still carry and use my Dragonfly 2 to this day. This is a long term review that benefits from a decade of ownership. How many reviewers can say that? Let’s give this awesome EDC blade the full run down.

General Dimensions and Blade Details

The Spyderco Dragonfly 2 or “DF2″ has a 2-5/16″ blade, an overall length of 5-7/16” and a weight of just 1.2 ounces. You hear about knives that “disappear” into the pocket. This is one of them. I’ve literally forgotten I’ve had it in the pocket many times. It’s been few the wash a few times too. I love the Dragonfly 2 for Every Day Carry (EDC), it’s perfect for almost any kind of urban environment and it’s got a big enough blade (and more importantly, a comfortable enough handle) for most EDC tasks.

Here is a size comparison with the Delica and Endura:

You can see how the Dragonfly II is significantly smaller than both knives. Here’s a video review I did many years ago:

The DF2 comes with a beautiful little leaf shaped blade. The blade almost resembles a dart with its triangular shape. The small swedge running across the top softens the feel of the spine and the whole blade has been given a full flat grind. There is adequate belly and the tip is both fine and strong. This blade excels at opening mail and packages. My only gripe with the blade shape, is that it lacks a sharpening choil. A small notch at the end of the edge that allows you to easily sharpen the entire length of the edge. You don’t have a sharpening choil here, so it will be difficult to sharpen the heel of the blade with a flat stone. Instead I’d recommend a rod sharpener like the corner of a Spyderco Sharpmaker stone.

This knife was made in Japan and like many of Spyderco’s Japanese production knives this one features VG-10 blade steel. VG-10 is a good choice as it holds a good edge and is capable of getting extremely sharp. I say “good” choice, not great, because these days there are better blade steels out there. VG-10 was fine back when this knife was first released, but times have changed. Still, VG-10 is serviceable blade steel and it certainly still works. What I like about VG-10 is how easy it is to sharpen, and how it is resistant to rust and corrosion. Newer, more exotic steels will hold an edge longer, but VG-10 gets the job done. I think it’s fine here, but wouldn’t complain if Spyderco upgraded it to S35VN or something along those lines.

In practice, the Dragonfly 2 cuts well and is an imminently useful knife. I have used my knife for years and years. Mostly for pedestrian things like opening mail and packages, and light food prep. I’ve never prepared dinner with just my DF2, but the knife has no problem with tasks like cutting fruit and cheese. It’s a small blade, but it’s all you need for basic stuff. And it’s a nimble blade. I reach for it when I have a delicate task. The tip is fine, and the angled thumb ramp allows you to get great control over the blade. This knife is a workhorse and it cuts great.

Handle, Ergonomics and Pocket Clip

The handle on the Dragonfly is made of fiberglass reinforced nylon (FRN) and is covered in Spyderco’s bi-directional texturing. This is the same kind of texturing found on both the Delica and Endura and I find that it offers exceptional grip in both wet and dry situations. Unlike the Delica and Endura, the Dragonfly does not have stainless steel liners. That is not a problem for me because the handle feels plenty strong and it is a big part of the reason why this knife weighs so little. Fans of G10 and steel can rejoice because Spyderco also makes a G10 version. All in all handle construction is solid, I like that they used screws for easy take down and everything feels very well finished.

Ergonomics is where we really start to see this little knife shine. Most smaller blades suffer from poor ergonomics and get kicked out of my pocket pretty quickly. The Dragonfly has extremely refined ergonomics and squeezes big grip out of a small knife. First of all, you have a 50/50 choil and large thumb ramp. Both have been given a large amount of jimping. I am a huge fan of 50/50 choils, it really can transform the way a knife handles and what it’s done for the Dragonfly is no exception. But perhaps my favorite ergonomic feature is the way the back end of the handle has been shaped to support the pinky finger. This gives you a true 4 finger grip and allows for awesome leverage on the knife. In my mind, this little section of FRN is what really makes the Dragonfly work.

The pocket clip is another home run. This is a Spyderco wire clip and is perhaps my favorite pocket clip design of all time (really). Small, but very secure, this little piece of hardened steel gives you a deep and reliable carry. The handle has been designed to allows for ambidextrous tip up carry. My only suggestion would be to anodize it black like on my Sage 1 – then it would be virtually invisible riding in a pair of blue jeans or dress pants.

Here is your pocket clip shot:

Deployment and Lockup

The Dragonfly takes advantage of a 11 mm Spyder-hole. This is a good size for the knife and has been left kind of sharp, which ensures that you thumb will catch on it every time. Deployment is smooth and reliable and you can easily flick this knife open if you like. I have zero complaints with the deployment.

Lockup is achieved through a small lock-back positioned in the middle of the handle. I like the lock-back on this knife, it’s easy to get too and the spring isn’t too heavy. The lock-back makes this a fully ambidextrous knife as well (always a plus – especially when a lefty is writing the review). Lockup is rock solid on the FRN version, with zero play in any direction.

Here is a parting size comparison with a Benchmade Mini Griptilian and a Kershaw Skyline, two other all-star EDC knives:

Spyderco Dragonfly II Review – Final Thoughts

This has been the story of the little knife that could. I seriously have nothing bad to say about the Dragonfly. I am totally impressed by how well this thing works as an EDC blade. Since it weighs nothing I also like pairing this with a larger tactical folder; that way I always have the right tool for the job.

Perhaps the only downside is the price. With a price tag hovering in the $50 range, you are looking at Delica (and almost Endura) territory. Some might have a hard time justifying spending that kind of money on such a small knife, especially given the rest of Spyderco’s product line.

However, I love my Dragonfly II and it has remained one of my all time favorite EDC knives. It is hard to beat this small, lightweight package for daily carry. The knife is imminently useful when you need it, but disappears into your pocket. It has stood the test of time for me, and easily makes my best edc knives list. For fans of Spyderco and ultra lightweight EDC knives, the Dragonfly II is a no-brainer.

No products found.

If you would like to buy a Spyderco Dragonfly II, I recommend purchasing it at Amazon.com or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Cold Steel Bushman Review

by Dan Jackson 16 Comments

When I ordered a Cold Steel Bushman I wasn’t sure what to expect. My previous experiences with Cold Steel knives have all been good, but for under $20 I had no idea what I was in for.

Buy the Cold Steel Bushman at BladeHQ

Buy on Amazon

All I knew for sure was that the knife was popular and cheap, which, as a reviewer, made it an easy purchase to justify. I was pleasantly surprised with the quality, and having now owned and used the knife for a while I’m a little closer to understanding what this blade is all about.

Purpose

The Bushman is billed as a survival blade, and I think it’s capable of all the major tasks. First of all, it can chop and baton – no surprises there. It’s also lightweight and easy to carry, a big plus for me. It could also easily be fashioned into a makeshift spear, very valuable in a survival situation. Finally, the knife is tough as hell and is pretty much indestructible. So yeah, it could certainly work as a survival knife.

I also think this could be a decent choice for a bug out bag – especially one done on a budget. This could also be a handy tool for the yard, clearing brush and general messing around type jobs. Finally, this could be great for the cabin, truck or anywhere else you would want to stash an inexpensive but highly functional fixed blade knife.

General Dimensions and Blade Details

The Bushman comes in two flavors, the bowie blade shown here and a more traditional shape. Both are 12-1/4″ long, have 7″ blades and weigh around 10 ounces. These are slender and light knives, not designed to be serious choppers, but capable of chopping, batoning and being fashioned into spears. If I could go back and buy the knife again, I would have gone with the non-bowie version. I think it would be easier to baton with it and I might be able to choke up and control it a little better for detail work.

The blade has a hollow saber grind that starts about 3/4 of an inch up the blade. Cold Steel supplies you with a good out of box edge and the knife has a nice tip for piercing, that held up really well to some of my prying tests. I took this knife to the wood pile in my back yard and went to town chopping, batoning and carving. I processed wood for a couple fires and generally tested the knife the best I could. The blade is 2.5mm thick and has a large flat portion due to the saber grind. I found it batoned “ok” – it would jam easily in dense pieces of oak but could tackle dry pieces of 4-5″ diameter pine without a problem. For batoning in my back yard I would prefer a wider blade with a higher bevel, but the Bushman got the job done.

The entire knife is made from a single piece of SK-5 high carbon steel. My research indicates that SK-5 is close to 1080, a durable tool steel. Being a high carbon steel, the blade will rust (and my knife shipped with prodigious amounts of grease on the blade and handle) so Cold Steel elected to provide a black powder coating. The black powder coating is attractive and durable but began to show signs of wear – totally expected. Cold Steel tempered the knife to 54 HRC. The result is that you have an edge which is pretty soft but incredibly tough – excellent for hard chopping without chipping or breaking. I found that the edge held up quite and came back very easily with a couple swipes on my strop.

One thing I noticed is that I actually managed to bend the edge a little in testing. Again, we appear to be flirting with the limitations of a thin survival knife made from a softer steel. I don’t think this really hurts anything but is worth noting – I’d much rather see the steel bend a little than chip out or break.

Handle and Ergonomics

The Bushman’s handle is about as simple as they come; it’s a single piece of steel that has been folded into a tube and welded together. What I like about this handle is that you can really beat on it. I would often strike directly on the handle and pommel as I tried to drive the knife through larger logs. Cold Steel claims that the handle / blade transition is capable of withstanding 2000 pounds of force. You could hit this handle all day and it’s not going to break.

Another great benefit to this design is that it is very lightweight. Depending on what you like to carry this could potentially serve as a backup knife and is a good option for camping trips and day hikes. I also like how you can easily convert the knife into a spear. This is something I didn’t try out myself, but it seems easy enough to do.

As far as ergonomics go the handle is surprisingly comfortable. After working with the knife for an hour I didn’t notice any hot spots. However, the handle doesn’t provide much in the way of traction. If it’s a hot day and your hand is sweaty I highly advise using a lanyard as there is no texturing to speak of. Perhaps you could wrap the handle with some sort of athletic tape or paracord and add some texture. That said, I personally had no issues with slipping and I found the handle to fill the hand well and offer a decent grip considering.

Sheath

The sheath is almost as simple as the knife. It’s made of Cordura and reinforced with plastic sheeting, stitching and rivets. My biggest problem with the sheath is the absence of any means of retention. If you turn the sheathed knife upside down, the blade will fall out. In my mind really this is more of a “pocket” than a sheath. Speaking of pockets, there is a large pocket on the front of the sheath with a velcro flap – could be handy. I’d throw a small strop or stone in there and maybe a fire steel. The only mounting option is a belt loop. Honestly I think given the price the sheath works, but a retention strap would make it work so much better. It might jack the price up a little but I think it would be worth it.

Cold Steel Bushman Review – Final Thoughts

This is a sturdy offering from Cold Steel. This is a no frills knife, but for around $25 shipped, I doubt anyone would be disappointed with this simple and hearty blade.

In fact, there is a lot to like about the Cold Steel Bushman. It uses a good high carbon steel, is pretty much indestructible, doesn’t weigh much and takes a keen edge. The ability to easily convert the knife into a spear is also really cool. Add a retention strap to the sheath and you have a very capable survival knife that could be pressed into a variety of roles.

Cold Steel 201052 Bowie Bushman 95Bbuskz

Made of highest quality material
Manufacturer: Cold Steel
Cold Steel bowie bushman 95Bbuskz

$33.70
Buy on Amazon

I recommend purchasing the Cold Steel Bushman at Amazon or BladeHQ. Thanks for reading.