g10

Review of the Spyderco Ouroboros (and a review of reviews)

Spyderco released Paul Alexander’s Ouroboros in 2016, and they discontinued the model last year. I waited until now to review it because I’ve carried and used the knife as my primary every day carry for several months—the only worthwhile review comes from someone who has actually cut something with the knife. Knife unboxings are fun to watch but they aren’t valuable reviews. And although the claim seems counterintuitive, I’m also reviewing the Ouroboros now because Spyderco discontinued it. Many reviews are nothing more than unwanted advertisements disguised as friendly advice. The Ouroboros provides an excellent option for a small EDC blade, and the reason you can be certain is that you can’t buy it from a retailer anymore.

An EDC blade should have a good steel in a versatile blade shape, and the Ouroboros has both. Even though VG-10 no longer excites steel junkies, its balance of toughness, corrosion resistance, edge retention, and ease of sharpening make it a solid all-round steel. There are better steels on the market, for sure, but VG-10 takes a mirror edge and holds it fairly well. Under light use such as slicing paper and cutting packing tape, VG-10 can hold an edge of 15 degrees per side, but the 20-degree factory bevel on my Ouroboros gives it the extra strength needed to push through cardboard and carrots. I wouldn’t try to baton through kindling with it but the blade has been tough enough for everyday use, and I haven’t seen a spot of rust.

Sharpening VG-10 with machine-guided stones followed by hand stropping has been about as easy as 440C, and much easier than notoriously hard steels such as ZDP-189 or S90V. The blade’s leaf shape and deep finger choil allow for a number of secure grips: you can rest your thumb on top of the blade with your forefinger behind the choil, pinch the thin tang near the Spyder-hole for kitchen tasks, or pinch-grip the handle just behind the tang to use the whole blade (just under 3 inches). The blade design also aids sharpening by avoiding Spyderco’s dreaded plunge grind where the edge bevel gets close to the ricasso, making it difficult to sharpen the blade along the entire edge.

The Ouroboros uses Spyderco’s patented compression lock, one of the most secure locking mechanisms on the market. We expect a folding knife’s lock not to fail, but the compression lock offers something that others don’t: it’s just plain fun to use! I Spyder-flick the blade with my middle finger and then press the liner tab to let the blade drop freely back into the handle. I hold the tab down and wrist-flick the blade back out. I shoot the blade back out with my thumb… It’s addictive.

The lock’s tab is the only visible part of the nested liners. The handle scales are grippy, but they aren’t the pattern of G-10 that shreds denim as you pull the knife out of your pocket. The Ouroboros fits snugly into the watch pocket of jeans because its handle is under a half-inch wide and it is just over 4 inches long. Once it’s clipped into the pocket, the lanyard hole and the paperclip-style pocket clip (the same size as the Dragonfly 2’s) are all that’s visible.

The knife’s specs and features make it a solid EDC choice, but it’s the subtle aesthetic details that make it not just my favorite knife to carry but also my favorite to admire. When it’s closed, the Ouroboros looks like it was designed to stay closed. Resting upright on a table, the knife balances on a few millimeters of G-10 behind the lock’s tab. Blade and handle look like an elongated oval, with the base of the blade’s spine emerging smoothly from the top of the handle, and the blade’s ample tip concealed within the narrow swirl at the handle’s base. The G-10 dips at the center of the handle, and a grind line—the transition from the thicker spine to the blade’s flat grind—cuts through the opening hole and across the blade at an angle that matches the handle’s sinuous line.

When the knife is open, it’s hard to believe that the tall blade came out of the narrow handle. The knife uniformly curves from tip to handle base, as if it were a few degrees taken from a large circle. In the hand, the spine’s curve rests comfortably along your palm. The balance point sits just below the lock’s tab, about where your middle finger rests in a standard grip. The curve and the balance point make an already light knife (just over 2.5 ounces) seem to be a weightless extension of your hand.

The Ouroboros is, for me, a perfect EDC. No two users will completely agree, but the foregoing review was my honest opinion, taken from months of enjoyment. Reviewers during the initial marketing push following the knife’s release had some fair criticisms: the knife was priced too high ($289.95 MSRP) for a small knife with a VG-10 blade, and Spyderco skimped when they used Teflon rather than phosphor-bronze
washers. In my experience, the washers have felt smooth and have been durable. The price kept me from buying the knife initially; I waited until the street price was well under 50% of MSRP before I bought one. With that said I’d pay full MSRP to replace it, if I had to.

New reviews all but disappeared shortly after the marketing phase, as they usually do. Some people reviewed the Ouroboros because they enjoy collecting or using knives and they wanted others to experience the same. They also might have done it because they hoped that attracting subscribers to their social media accounts would eventually allow them to quit their 9-5 grinds. Both are noble causes. But it has become more difficult to sort honest knife reviews from disguised advertisements.

I found myself confused during the time that I was reading and watching reviews, trying to decide whether to spend my hard-earned money on an Ouroboros. I struggled to answer simple questions: Is this a good knife, or have I just read an “advertorial”? A portmanteau of advertisement and editorial, an advertorial is a way for marketers to deliver ads that appear to be friendly advice. Search for a review online and you’ll encounter advertorials that conveniently offer a link to purchase the knife. Watch video reviews and the reviewers might mention that a manufacturer or a retailer provided the samples, or they might not. The most valuable PR is a consumer’s endorsement of a
product on social media, which appears to be unsolicited but is often just the opposite.

Knife addicts, steel junkies, edge snobs… all of us are susceptible to nefarious marketing schemes when we’re researching a potential purchase. One way to make a clearer decision is to avoid reviews of knives still available for purchase, or at least to maintain a healthy skepticism. Consider the reviewer’s or the website’s ethics. Does the reviewer pull the knife out of a box and tell you how great it is, with a few detractors added for credibility, or has the reviewer already carried and used the knife? Does the reviewer disclose who provided the knife and how that might influence the review? Does the website explain why there are links to purchase the knife within an article, or just following it? If you can’t answer those questions, then you should move on to another review.

My review of the Ouroboros arose from a deep enjoyment of the knife, and I wanted to share that with like-minded people. If you’d like to purchase any of the Ouroboroses that I’ve stockpiled since it has been DISCONTINUED, click on the link below to check out my online auctions…

Author: Christian Zawojski

Note from the Editor: Christian wanted to submit this as a guest review for publication, so I thought “why not?” It’s interesting knife and commentary on knife reviewers. Thank you, Christian for the entertaining and thought provoking article!

Spyderco Hundred Pacer Review

by Seth Vietti 7 Comments

At first, nothing about the Spyderco Hundred Pacer appealed to me. For someone intent on wringing maximum utility from every inch, every ounce, and every dollar’s worth of blade, the Hundred Pacer seems absurd: too big, too heavy, and too expensive. It’s also… weird. Impressively weird, even for Spyderco, whose catalog is persistently peppered with odd and ugly ducklings.

Buy the Spyderco Hundred Pacer at BladeHQ

Buy on Amazon

I guess it’s a good thing I had a chance to handle this odd and imposing design in person before buying one, otherwise I would have almost certainly missed out on one of the most useful and interesting knives I’ve carried this year.

General Dimensions & Blade Details

The Hundred Pacer is named after a venomous snake, a Taiwanese viper supposedly so deadly that – according to local folklore – whoever suffers its venomous bite will stagger just one hundred paces away before dropping dead. The name isn’t the only thing designer Jonny Liao borrowed from the snake; the knife’s blade shape is inspired by its characteristically upturned snout, and the two-toned texture in the G-10 handle is inspired by the rhomboid pattern of brown and tan scales running down its back.

The Hundred Pacer is such an oddly proportioned design that it’s hard to get a sense of this knife’s scale from pictures alone. Comparisons can help – here it is against the Spyderco Military family:

While it may be shorter overall than the full-sized Military, the Hundred Pacer manages to fit in a bit more edge thanks to an efficient use of handle space. The knife feels substantial, weighing in at just over five ounces, but given its sheer bulk it doesn’t feel disproportionate.

It’s hard to overstate just how broad the blade of the Hundred Pacer actually is. For a folding knife, it’s downright gratuitous: at its widest point, the blade of the Hundred Pacer is just a few millimeters shy of my classic Victorinox 8 inch chef’s knife. In use, however, it feels purposeful; intuitive, even. The edge begins below the handle, affording it near full-length contact against a cutting board. It slopes steadily from heel to point in a single uninterrupted arc, slicing aggressively but predictably, without abrupt changes in geometry that can cause cuts to push or pull away. The tip sits just above the centerline of the knife and feels precise and easy to control. And the extra-wide flat ground blade, coupled with an acute distal taper, makes for startlingly good cutting performance.

I have observed that a knife with good blade geometry will continue to cut comfortably through all but the most delicate materials even after the edge has dulled. Long after the Hundred Pacer had lost its hair-shaving sharpness from cutting in the kitchen, at the fireplace, and in front of the recycling bin, it continued to perform well.

No doubt Spyderco’s choice of blade steel, CTS-XHP, played a significant role here, too. It is said to be an advanced, stainless version of D2. I can’t speak to the science behind the alloy, but after more than a year of use I can say it has become a personal favorite for its well-balanced combination of good corrosion resistance, excellent edge retention, and ease of sharpening. It plays nicely with my cheap sharpening stones, polishes well, and seems to take a fine edge easier and hold it noticeably longer than comparable industry favorites S30V and S35VN.

Handle, Ergonomics, & Pocket Clip

In hand, the Hundred Pacer feels practically paleolithic, a fistful of G10 fit for a neanderthal’s fist. There’s plenty of room on the handle to accommodate different grips, but the hump above the pivot tends to push the hand away, either back on the handle for a natural grip:

or forward, with the thumb nestling down onto the sloped spine of the blade to apply pressure directly into a cut:

Both grips are useful and comfortable, but more often than not (and especially when working on a cutting board) I find myself using the knife in a pinch grip.

The snakeskin pattern milled into the G10 is attractive and substantially grippy, even when wet. Compared to the typical peel-ply stuff, it has a variegated, organic feel. And mercifully, Spyderco have opted to leave a patch of the handle smooth under the clip so the texture doesn’t gnaw away at your pockets.

When you need to apply some force, it’s nice to have a handle that your hand can stretch out on. However, there are some ergonomic drawbacks to such a broad, flat handle. Tasks that require deft rotation of the knife in the hand (e.g. peeling small fruit) are a little awkward, and the bulbous rear end of the knife can feel oversized in some grips.

Perhaps the biggest drawback of all is how the knife carries. Despite being equipped with Spyderco’s deep carry wire clip – a minimal, functional design that on any other knife I might call discreet – the Hundred Pacer carries… conspicuously. It dominates pocket space like a limo dominates curbside parking. The knife starts wide at the clip and gets even wider around the pivot, so the experience of reaching past it for something else in your pocket ranges from awkward to impossible. Thankfully, the clip is always cooperative. Once you cede control of your pocket over to the Hundred Pacer, getting the knife into and out of it is thoughtless; a real testament to the utility of Spyderco’s wire clip design.

Deployment & Lockup

Because most of the mass in the Hundred Pacer’s blade is centered around the pivot, flicking it open doesn’t have the weighty, wrist-snapping feel you might expect from such a big blade. Its unusual kinetics take a little getting used to, but thanks to generous access to the thumb hole and a firm – but not hard – detent, one-handed deployment is reliable whether you want to open it slow and sure, flick it out with your thumb, or “spydieflick” it with your middle finger. The pivot turns fluidly on robustly thick phosphor bronze washers.

The nested liner lock has been drama-free since day one, providing secure engagement with the blade at exactly the same spot today as it did when I first opened the knife. Unlocking it is simple, and more importantly, safe: unless you deliberately move your thumb away from the lockbar release cutout, there’s no way for the blade to cut your finger while closing.

Spyderco Hundred Pacer Review – Final Thoughts

It almost goes without saying, but the Hundred Pacer won’t be for everyone. Even for those it does appeal to, I suspect that its price ($234 on BladeHQ as of December 2018) makes it easy to choose something else. If this knife was under $200, I think it would be a much more compelling buy.

That said, if I lost my Hundred Pacer tomorrow I would not hesitate to replace it. There are knives that carry more discreetly (most of them), but in use, the Hundred Pacer might be the best all-rounder I’ve ever owned. It’s a superlative slicer, but it still has enough rigidity at the tip and strength behind the edge to handle forceful stabs and torquey cuts. The ergonomics on a cutting board are a huge practical advantage – when I expect to be cooking in an unfamiliar kitchen, I bring the Hundred Pacer.

It’s perfect for long trips away from home – or just long days – when it can flex fluently from pocket knife, to work knife, to kitchen knife. Just don’t forget to clean it in-between.

Spyderco Hundred Pacer Linerlock

Crafted from the highest quality materials
Built for performance and durability
Made in Taiwan

Editor: I recommend purchasing the Spyderco Hundred Pacer at Amazon or BladeHQ.

Fantoni C.U.T. Review

by Andrew Gene 6 Comments

Last Updated: November 3, 2019
The C.U.T. is a knife conceived by Dmitry Sinkevich and produced by Fantoni Knives. Sinkevich is an interesting Russian custom knife maker who creates a wide variety of designs, a folding version of this knife being one of them.

Buy the Fantoni C.U.T. at KnifeArt

C.U.T stands for Contrast Utility Tactical. I’m not really sure what that means but it doesn’t detract from the fact that this is an awesome knife.

General Dimensions and Blade Details

The C.U.T. has an overall length of 9.06″, a 4.00″ blade blade, weighs 6.173 ounces, and is made in Italy. Fantoni makes a production C.U.T. folder as well that comes in black with either a flipper or a stylized thumb hole. The fixed blade also comes in a ‘tactical’ variation with black G10 handle scales and a Kydex sheath. This version, which is marketed toward the outdoor crowd ships with a natural or black, top grain leather sheath.

The blade steel, S-30V, contains 1.46% carbon. With more than 1.2% it is enough to be classified as an “ultra high carbon” alloy. The addition of 14% chromium also makes it a stainless. 2% molybdenum and 4% vanadium has been added to improve the edge qualities through grain refinement and an even distribution of stable carbides.

The unique composition of S30V is achievable through a powder metallurgy (sintering) process that allows the combination of contrasting elements. The result garners the “super steel” classification. Although an impressive title, there are many other competitive super steels, notably Böhler M390, Damasteel RWL-34 and Carpenter CTS 204P.

The blade has an up-swept profile that increases the cutting surface and creates a long, sloping belly. This is similar to a trailing point except that the opposite edge drops to meet at the tip producing a straight point, rather than a hooked one. The steel has an over-all thickness of .154″ (4mm) and has been reduced with a high flat grind ending in a good sized choil for maintenance. A secondary bevel creates the keen, final cutting edge. A long swedge is ground along the majority of the spine for easy push cuts. From the side it would appear to be a double edge but it isn’t. Rounding things out is an interesting choil like notch at the ricasso.

The grinds are well rendered and the blade has received a fine stone wash finish. Fantoni and Sinkevich’s logos and word marks along with the steel type are tastefully laser etched on the sides of the blade.

While .25″+ blade stock has been popular in fixed knives these days, it is apparent that this thinner blade is a great choice for users who don’t abuse their tools and want performance over brawn. That’s not to say that the C.U.T. won’t hold up to serious use. It’s just well balanced, with a slight lean toward high cutting efficiency.

Handle and Ergonomics

For the handle scales Fantoni has used G10. This glass reinforced epoxy laminate has a high resistance to solvents and is extremely tough. The material has a slightly abrasive finish that provides good grip.

As with many higher end fixed blades the C.U.T. has a full tang construction. This means that the handle is backed up by the same piece of steel that makes the blade and travels to, or extends past the handle scales. While a full tang construction normally adds some weight, it is superior in strength to a partial, hidden “stick tang”. To keep things lean, Fantoni has removed a substantial amount of stock beneath the handle scales to keep the knife at a modest 6.2 oz.

The ergonomics one the knife are also well thought out. There is a row of jimping on the thumb ramp with more on each edge of the pommel working to add traction in a standard or reverse grip. The inner edge of the handle has subtle finger grooves that help to lock the hand in place without feeling restrictive. Toward the blade there is a front guard that prevents your hand from sliding forward. The detailing here is exceptional. The way that the guard appears to be wrapped by the blade and blends into the grind is beautifully executed.

The back side of the handle has a slight peak that creates a convex shape that nests against your palm. While slightly angular it doesn’t create a noticeable hot spot for my medium sized hand. The scales are a good, filling thickness. All edges have been contoured for comfort and the corners are cleanly chamfered. The same is true for the edges of the tang which extend slightly past the orange G10’s edges. An exposed pommel includes a lanyard cut-out and can be leveraged as an impact tool.

It’s welcome that there isn’t a heavy texture on the handle nor is the jimping saw-like. The features that the handle has are already enough for extended, safe use and won’t abrade your hands.

Sheath

For carry the knife ships with an elegant top-grain leather sheath. The belt loop and two sides are made from one piece of leather. This smart construction is form fitted to the handle then glued and stitched for strength.

The version in this review has a classic, natural color with a fine glossy finish. Fantoni’s logo is embossed on the front side with “Made in Italy” on the back. The sheath also comes in black but this version has a more dynamic look in my opinion.

Fantoni C.U.T. Review – Final Thoughts

When everything is considered the C.U.T. is an exceptional belt knife. The materials are a solid choice while the fit and finish is outstanding. The design has some elements that remind me of classic eastern European hunting knives. That aside the clean, angular lines and precise execution of all the elements are very modern. They could easily have the C.U.T., along with other Sinkevich knives, comfortably residing somewhere in the future.

Fantoni has done a great job teaming up with talented designers like Tommaso Rumici and William Harsey in the past. Their collaboration with Dmitry Sinkevich also falls into this category, combining key elements in a effective, winning combination.

Fantoni CUT
From: KnifeArt

Editor: I recommend buying the Fantoni C.U.T. at KnifeArt. Please consider that purchasing anything through any of the links on this website, including links to Amazon and BladeHQ, helps support BladeReviews.com, and keeps the site going. Any and all support is greatly appreciated. Thank you very much.

Additional Specifications:

Overall length: 9.06″(230 mm)
Weight: 6.173 oz (175g)

Blade

Length: 4″ (102 mm) (measured to out most point of the scales to the tip)
Thickness: 0.154″ (4 mm)
Blade: CPM S30V
Hardness: HRC 61-62
Finish: Stonewashed

Handle:

Length 4.92″ (128 mm)
Full Tang Construction
Orange or Black G-10

Sheath: Black or Tan Leather or Kydex

Made In Maniago, Italy

Manly Patriot Review

by Dan Jackson Leave a Comment

Oddly enough, I find myself writing the first draft of this review of the Manly Patriot on the morning of the 4th of July. Fitting to write a about a knife called the Patriot on a day set aside for patriots. But then again, I’m not sure how patriotic it is for me to write about a knife made in Bulgeria on Independence Day. I should probably be reviewing this Patriotic Eagle Head and USA Flag Folding Knife instead.

Back to the Patriot. I reviewed it’s folding cousin, the Manly Peak, a few months ago, and enjoyed its clean, utilitarian design.

The Patriot is even simpler. Not surprising given it was designed to be the fixed blade version of the Peak. I’ve had my heads in the clouds recently reviewing high end folders, so it’s almost odd to hold something this simple and spare. But let’s face it, these kinds of designs are the most practical, and most likely to see some use. Accordingly, my Patriot has seen a good deal of action. It’s one of those blissfully simple knives you can’t help but use. I’m ready to write about it.

This knife was provided by the manufacturer for review and long term testing. All thoughts are my own.

General Dimensions and Blade Details

The Manly Patriot has an overall length of 8.66″ (220mm), a 3.70″ (94mm) blade, and weighs 4.4oz (126g) ounces. Manly is a Bulgarian knife company, and that’s where the Patriot was both designed and manufactured.

I think the knife is a great size for general utility purposes. It wouldn’t be out of place if you lived on a rural property, and could accompany you on a hunting or fishing trip. Certainly it would work well on a camp site, and it’s perfectly fine for tooling around in the back yard. It has a good heft to it, so it’s not ideal for ultra lightweight backpacking, but it’s fine for day hikes. It’s too large to be an urban EDC fixed blade. It was designed to be an all-purpose utility knife and I think it’s dimensions are appropriate with that in mind.

The blade is an ultra simple drop point with a full flat grind. There is no swedge. The tip is fine without being delicate. The edge has been evenly applied and there is a small sharpening choil. The entire knife has been given a something of a satin finish. All of this is simple but nicely executed.

Perhaps the most remarkable feature of the blade is how it has been ground from 4mm thick stock. It’s relatively thick stock for a small knife like this. Still, the Patriot is ground thin behind the edge and is a capable slicer. I’ve used this knife quite a bit for cutting apples. It cuts beautifully in that capacity, and the simple fixed blade design makes the knife much easier to clean than a folder.

Just like the Peak series of folders, Manly offers the Patriot in a variety of blade steels, including S90V, 154CM and DIN 1.2379. My particular knives came in DIN 1.2379. DIN 1.2379 is a German steel and is equivalent to ANSI D2. Here is a link to the full data sheet for 1.2379 where you can review the chemical composition. Here is a link to DIN 1.2379 on the excellent ZKnives Steel Composition Chart. With a Chromium content of 12%, 1.2379 is more stainless than other variants of D2.

My experience with the Patriot in DIN 1.2379 has proven it to be a capable cutter multiple times. The toothy steel and full flat grind means the knife cuts aggressively. It’s a wonderful knife for breaking down large cardboard boxes, and tackling other large utility oriented chores. I’ve found the knife to be a capable carver, easily peeling off large strips of wood from some ficus logs I have in my back yard. It isn’t great for batoning, as it’s a relatively short blade, and a full flat grind, but you can baton little sticks and stuff with it.

I haven’t had any issues with rust or corrosion. I wouldn’t have guessed this steel came in a D2 analog. It’s nothing like the D2 on my old Benchmade 710. This DIN 1.2379 is easier to maintain and seems to be more stainless.

Handle and Ergonomics

The Patriot features contoured G10 handle scales permanently fastened to the handle with epoxy and eyelet rivets. Fit and finish is excellent. The parts all line up and are flush. The edges of the handle scales have been sanded down for comfort and rounded to provide some palm swell. The eyelet rivets are simple yet effective. The eye holes themselves are large and you can easily thread a couple strands of paracord through them. Perfect if you want to attach a lanyard or lash the knife to a stick for some reason. Rounding things out is a small amount of exposed tang at the pommel. This could be used as an impact tool.

The ergonomics of the Patriot are excellent. As I mentioned earlier, there are no sharp edges on the handle and the handle design itself is simple. The combination of contoured handle scales and thick blade stock fill your hand nicely. There is sharp jimping on the thumb ramp, and the secondary finger ramp right before the sharpening choil. This provides excellent grip, even in slippery situations. The G10 itself has a very light texture to it. Most of the grip comes from the jimping.

In practice I found this to be a comfortable handle. The knife has a natural feel in both forward and reverse grips. The balance point is about an inch behind the forward eyelet rivet, giving the knife a neutral feel if you choke back. Snugged up on the handle it has a slightly forward feel to it. The jimping strikes that nice balance of being present but not obnoxious. You can cut for an extended period of time without your thumb wanting to fall off.

All said this is a comfortable knife that will be easy to use in a wide variety of circumstances.

Sheath

The Patriot comes with a molded kydex sheath. The sheath has been finished in the same simple yet thoughtful manner that the knife has, and it serves as a good counterpoint to the knife. There is a large eyelet rivet so you can tie a lanyard to the sheath, or you can attach the included belt loop to any one of the 7 small eyelet rivets and thread a belt or strap through the loop and carry it that way.

The fit and finish on the sheath is excellent. It has been crisply cut, and it’s sturdy. There is a drainage hole near the tip. Retention is great. The knife slides in with a solid “snap” and the knife is held firmly in place. There is no rattle or shake of any kind.

This is the kind of sheath I would like to see with pretty much every production fixed blade knife. It’s a simple kydex sheath with good knife retention and plenty of mounting options. What else could you ask for?

I’m not as impressed with the belt loop. It’s the kind where you need to take your belt off to pass your belt through the loop, vs. a quick release system. It’s basic and it works, and I suppose if you wanted something fancier you could always mount a tek-lock to the sheath. But it’s not something I see myself using. I prefer to instead pass a length of paracord through the large eyelet rivet and tie that to my belt and then carry the knife in my waistband or pocket.

Here is a parting shot of the Patriot next to my Benchmade Nimravus:

I recently repurchased the Nimravus and have an updated review coming soon. It’s a bigger knife, and seems far more complicated than the Patriot.

Many Patriot Review – Final Thoughts

I’m a fan of the Patriot. It’s everything you need from a small fixed blade knife and nothing you don’t. At around $75.00 I think it is priced appropriately. You get a thoughtful design that has been nicely executed with high quality materials. The blade cuts well, the handle is comfortable, and the sheath is excellent. DIN 1.2379 is something of an unknown quantity here in the States, but I have found it holds a good edge, is easy to maintain, and I haven’t had any issues with rust or corrosion.

I have found myself reaching for the Patriot again and again. It’s great for dirty jobs whether they are big or small. While a simple knife like this won’t attract the attention of a high end production folder, it’s perfect for people that want a simple no-nonsense fixed blade for general use. Recommended.

My understanding is that Manly Knives are mostly sold through their distributors at this point. So I recommend purchasing the Manly Peak and Peak 2 at ManlyUSA if you live in the States or Manly Canada if you are in Canada.

I recommend buying knives at Amazon and BladeHQ. Thanks for checking out the review.

Manly Peak Review

by Dan Jackson 2 Comments

I have a couple Manly knives for you today. That’s not a typo. Manly is a Bulgarian knife manufacturer. More recently they have started distributing knives in the USA through their aptly named Manly USA distributor.

A couple articles on Nemo Knives Review put their products on the map for me, and I quickly became attracted to their spare yet functional designs.

I reached out to their US Distributor, Lubo, and and was kind enough to provide these knives for review free of charge (full disclosure). What you are looking at is actually their Peak and Peak 2 models. The Peak features the thumb hole, while the Peak 2 is a two hand opening design. That’s the biggest difference so I’ve decided to put them both into one review. I also have their fixed blade, the Patriot, and will perform a write up on that later on.

General Dimensions and Blade Details

The Peak has an overall length of 8.66″, a 3.7″ blade, weighs 4.0 ounces, and is made in Bulgaria. This is a big work knife, but it’s slim and lightweight for its size. It reminds me of a beefed up Spyderco Endura, and strikes me as a hybrid between that knife and the Cold Steel Broken Skull.

The Peak came with a thin full flat grind, while The Peak 2 came with a partial flat grind. Both blades are cut from 3mm thick stock and share a similar elongated clip point profile. The long and thin blade profile provide plenty of cutting edge, some belly, and a fine tip. Manly included small sharpening choils on both models. The edges are evenly ground, and Manly states on their website that the edges are 15 degrees inclusive. It’s nice to see that information provided by the manufacturer. The blades are left with a light stonewashed finish.

Manly offers this knife in a variety of blade steels, including S90V and D2. My particular knives came in DIN 1.2379. DIN 1.2379 is a German steel and is equivalent to ANSI D2. Here is a link to the full data sheet for 1.2379 where you can review the chemical composition. Here is a link to DIN 1.2379 on the excellent ZKnives Steel Composition Chart. With a Chromium content of 12%, 1.2379 is more stainless than other variants of D2.

Lubo told me these knives were designed for use and asked me to put them through their paces. Right on. I so happened to have a couple large cardboard boxes at the house, and that is where I started. The Peak 1 was especially good at cutting through cardboard with its full flat grind, but both performed admirably. I also used the knives outside and whittled extensively with them. They aggressively removed large chunks of wood, and were handy for a morning of yard work. Finally I tested the knives on some apples. I try to have some fruit after dinner each night, and find cutting up an apple to be a good test of edge geometry and stain resistance. Both knives cut cleanly, although again the original Peak was a slightly better slicer due to that full flat grind.

Edge retention was good on both of my knives. Cardboard is an extremely abrasive material, and by the end of my box break down session both knives needed a tune up. Neither could shave hair. I used the coarse and fine rods on my Spyderco Sharpmaker and was able to freehand these back to shaving sharp in under a minute. This was surprising as D2 can be a notoriously tough steel to sharpen. I had no issues.

I also haven’t had any issues with staining, rust, or corrosion. I never cleaned this knife after cutting up fruit and I took the pictures after weeks of testing. The extra Chromium in this blend has to be why. Frankly, I would have never guessed the blade steel in this knife was an analog to D2. It behaves nothing like the steel on the Benchmade 710. In my opinion that is a good thing as I found the 710 tough to sharpen.

Handle, Ergonomics, and Pocket Clip

The Peak features full G10 handles with nested stainless steel liners, and a steel black lock. Everything is held together by a series of allen head fasteners. Fit and finish are good. The G10 has been crisply chamferred, all the hardware has been given the same bright stonewash of the blade, and all the parts line up neatly. This is like a reinforced version of the Endura.

Manly offers the Peak in 2 grades of G-10. A coarse peel-ply G10 shown with the black Peak 2, and a finer, less abrasive G-10 as featured on the orange Peak. Both offer good traction without being overly abrasive. In addition to the orange and black colorways, Manly offers these knives with desert camo G10 scales as well.

The Peak is a simple design. What it lacks in finger choils and curves, it makes up for with a simple handle design that is sure to accommodate most hands. It doesn’t get much more basic than this, with the gentle curve of the handle meeting easily with the palm of your hand. The corrugated G10 provides plenty of traction, and the inclusion of a short run of jimping on the bottom of the handle works perfectly for capturing your index finger. You don’t see jimping placed here on most folding knives, but I like it. It doesn’t wear out your thumb, but it also prevents your fingers from slipping forward on the blade. Smart.

The pocket clip is yet another example of simple, practical design. The pocket clip is a fold over deep carry clip, mounted on the very edge of the handle to ensure the knife buries as deeply and discreetly as possible. It’s swappable for tip up right or left hand carry, and a “filler tab” a-la Hinderer Knives is included to fill the space for the side you aren’t using.

In practice the Peak and Peak 2 both carry well. They are relatively thin and light knives, and the strong pocket clip anchors them securely in your pocket. The only possible issue is the prominent inclusion of the word “manly” on the clip. More self conscious readers may find that to be a message they would rather not broadcast from their hip, but like every other aspect of the knife, I think the branding has been done tastefully and I don’t mind it.

Deployment and Lockup

For deployment you have your choice of the thumb hole clad Peak, or the two hand opening Peak 2. Your choice will of course depend on your preference, but also perhaps where you live. As a Bulgarian company I am sure Manly has many European customers, and some of these countries don’t allow one hand opening knives. As an American who has grown quite fond of the one-hand-opening feature of modern folding knives, I tend to prefer the Peak, but the Peak 2 is kind of fun in its own way.

For the Peak, the thumb hole is actually a slight oval. In speaking with Lubo, my understanding is that this is done in part to avoid any issues with Spyderco and their Round Hole trademark. It works well, and you can easily snap the blade open with your thumb. However, the strong back lock will prevent you from flicking the blade open.

And on the subject of Spyderco, here is a shot of the Peak vs. my Paramilitary 2:

The Peak 2 is easy enough to unfold with two hands. There is plenty of room to grab the blade, and both knives are equipped with phosphor bronze washers. They operate smoothly.

For lockup we have the tried and true back lock. This is one of man kind’s oldest locks, and it remains relevant for good reason. It’s simply, sturdy, and secure. Here the lock back has been executed crisply. The spring is strong and the blade locks in place with a satisfying “snap”. There is no blade play on either of my knives. When it’s time to close the knife back up, the lock is easy enough to disengage with your thumb. All in all there is little to complain about when it comes to the lock on these Peak knives.

Blade centering is a mm or so off on my Peak, and perfectly centered on my Peak 2. No complaints given the price point.

Manly Peak Review – Final Thoughts

The Peak and Peak 2 are charming every man folders from Manly. I like the simple design. The knives are left with everything you need and nothing you don’t. They are built nicely from quality materials. All of this adds up to no-nonsense work knives. These may not win the “Most Innovative Knife of the Year” award any time soon, but they are comfortable in hand and cut really well.

Long time readers know I’m a fan of no-nonsense work knives like the Cold Steel American Lawman, and ESEE Zancudo. Humble work knives that get the job done. This Manly Peak is cut from the same cloth. But it’s also a very thoughtful design. Elegant, really.

I thought I would enjoy the Peak, otherwise I wouldn’t have requested a review sample, but I was surprised at exactly how much I enjoyed it. It’s hard to believe a simple knife like this didn’t already exist in a market crowded by thousands of models. I’m glad I checked it out.

These knives start at $80, and top out around $120 if you want S90V blade steel. I think Manly is offering good value for money here. $80 isn’t much more than what an Endura will run you these days, and in this case you get a superior steel, a deep carry pocket clip, and a full G-10 handle.

I like and recommend both these knives.

That said, please consider that buying anything through any of the links on this website, including Amazon and BladeHQ, helps support BladeReviews.com, and keeps the site going. Any and all support is greatly appreciated. Thank you very much.

Emerson PUK Review

by Travis Pike 1 Comment

Last Updated: August 5, 2019
Emerson is well known for producing a wide variety of knives, but they are most famous for producing a tactical folding knife known as the CQC 7. The CQC 7 is popular among spec ops troops around the world. The CQC 7 is what caused Ernest Emerson to turn the company from a garage operation to one of the most well-known knife companies in the world.

Buy the Emerson PUK at BladeHQ

Buy on Amazon

By trade I’m a gun guy, and as a gun guy I find it easy to identify guns in movies. I’ve slowly become more and more of a knife guy and now I’ve started to notice knives in movies. Does this influence my interests? Sometimes… So, was Bruce Willis and Tears of the Sun on my mind when I snatched up an Emerson PUK? Sadly no, but once Tears of the Sun hit Netflix I got a little confirmation bias.

The Emerson PUK, or Police Utility Knife, is one of the few fixed blades Emerson produces. The PUK is not a big knife. It’s short and thin, but easy to carry. If Rambo has set the baseline for your commando knife, you’ll be disappointed at the subtle and small nature of the PUK. The PUK was made for police use, but according to Emerson has found its way into the hands of elite units like the British SAS.

I’m sure it’s a great knife for Bruce Willis’ Navy SEAL, but I wanted to find out what the PUK offered the everyday Joe.

General Dimensions and Blade Details

The Emerson PUK has an overall length of 8.5 inches with a 3.6-inch blade and weighs only 5.5 ounces. The PUK is one of the many Emerson knives made in the USA.

The Emerson PUK blade is only .125 inches thick. This thin blade helps keep the knife both balanced and lightweight. The blade is designed for heavy duty cutting and is made from a single piece of 154CM steel. 154CM is better suited for heavier cutting than standard stainless steel and has excellent edge retention. The biggest downside to this steel is its corrosion resistance. It’s far from perfect, but Emerson took steps and coated the blade to protect it against corrosion.

With the words Police and Utility in the name it’s safe to say this knife was designed to be more tool than weapon. However, I wouldn’t want to find myself on the wrong end of the PUK. The intent of the blade is for tactical use and the situations most police will find themselves in.

The cutting work of police is likely going to be heavy duty. Officers may be tasked with cutting through seat belts, through clothing, into the seats of cars and trucks, and much more. This kind of cutting requires a strong and capable knife. This is one of the advantages of using a fixed blade over a folding knife. With this in mind the blade’s V grind makes a lot of sense. V grinds tend to be better suited for heavy duty cutting. The PUK certainly has no qualms about slicing through materials both thick and thin.

I’ve taken the PUK to task by cutting through cardboard, an old pair of jeans, a ratchet strap, and some half inch thick rope. It glided through the cardboard and jeans, and only took a little effort to rip through the rope and ratchet strap. I’d like to try it against a seat belt but the Highway Patrol likely wouldn’t accept that as an excuse for why I’m not buckled up.

The blade’s short length makes it nice and handy. A 3.6-inch blade is something more common on folding knives, but it makes the PUK compact enough for easy carry. For plain clothes officers or civilians this thin and relatively short knife is easy to conceal.

Handle and Ergonomics

The handle is made of two pieces of G10 glass laminate material. G10 is a tough and easy to texture material. Oh boy, are the PUK’s grips textured. The grips are heavily scalloped and between the scalloping is a rough stippling. Near the inside of the grips is a step style texturing all the way to the center of the handle. The combination of these three-different grip texturizations gives you a one helluva grip on the knife. This grip isn’t shy about being rough.

In the hand this is nice because the knife isn’t going anywhere. You can chop, slash, and stab and the knife is staying put. The downside is that heavy work sans gloves really starts to rub into the hand. I developed a few hot spots during testing. This is one knife where tactical gloves are a must have for long term use.

Another downside occurs when carrying the knife concealed. It really rubs against the body to the point where it’s just plain painful. I would suggest an undershirt between the knife and body.

The handles form and shape is nice and comforting. It gives you a sure grip and the handle naturally forms a bit of a cliff to protect the index finger. On the opposite side a slight ridge rises and provides you a good point to rest the thumb for extra leverage.

Sheath

The old PUK’s came with nylon sheaths and this is what you see in Tears of the Sun. The new PUKs come with I’ve found to be one of the most robust and versatile sheaths options out there. It’s a kydex sheath that comes complete with a Tek Lok belt attachment.

The Tek Lok, from Blade Tech, is an incredibly versatile sheath mounting system. With the appropriate sheath you can easily change the orientation of the knife. You can do anything from add a little forward cant to mounting and carrying the knife horizontally.

The Sheath uses a passive retention system that ensures the knife stays put. It doesn’t take much to remove the knife, but it feels secure. I’m comfortable running the knife horizontally, and even upside down on tactical gear. The sheath is even compatible with MOLLE Lok components if you want to attach it to a vest or battle belt.

Emerson PUK Review – Final Thoughts

The Emerson PUK is a nice working mans fixed blade knife. It does nothing but excel at its role as a compact fixed blade utility knife. This short, but strong knife is an excellent companion for police and soldiers who want something more compact than your average fighting knife. I could see it being an excellent knife for first responders as well. The PUK could be a camping knife, but a heavier, more robust knife like the ESEE 4 would likely be a better outdoors option.

It’s not exactly a cheap knife, retailing at over 200 dollars. I will say I think the knife is worth the money, but it may not be a knife needed by your everyday Joe. If you are looking for a compact, lightweight and dare I say easy to carry fixed blade utility knife the PUK fills that role. It’s a high quality blade that lives up to its namesake.

Emerson Police Utility Fixed Blade Knife, Stonewashed Finish, 3.60 in Blade, PUK-SF

If you are thinking of buying an Emerson PUK, please consider purchasing it at Amazon or BladeHQ. By purchasing things through any of the links on this website you support BladeReviews.com, keep the website free of annoying banner ads, and help produce future reviews. Thank you very much.