8Cr13MoV

CRKT Drifter Review

Last Updated: August 8, 2019
For those who can’t get enough high value EDC knives, or simply need a tool for every day use that is both well made and inexpensive, I think it’s going to be tough to ignore the CRKT Drifter. For some, this may be their first “real knife” that sends them down the slippery slope that is blade collecting. Others might want to spice up their EDC rotation without breaking the bank. I think that for many reasons this inexpensive offering from CRKT is a great ambassador for the knife world, and its review here is long overdue.

Buy the CRKT Drifter at BladeHQ

Buy on Amazon

General Dimensions and Blade Details

The Drifter comes in two major variants, a liner lock version with G-10 scales and a stainless steel (SS) framelock version. Both share the same overall length of 6.5″ and the same 2.88″ blade. The stainless steel handled version weighs 3.2 ounces while the G10 clad Drifter weighs a mere 2.4 ounces. If I had to pick between the two for EDC, I’d say the G10 version gets my vote. I love the ultra light carry weight, it really disappears in pocket. Regardless of the version that strikes your fancy the sub 3″ blade and reasonable weight make these ideal EDC knives.

The blade is a classic drop point shape that reminds me a lot of my Benchmade Griptilian. It features the same swedge and hollow grind that starts about 3/4 of the way up the blade. The Drifter is given a gentle recurve that adds a little spice without making it too difficult to sharpen. The tip is fine enough for detail work, but not too delicate. This is an all around solid blade shape.

The G10 version of this knife comes with a handsome gray Titanium Nitride (TiNi) coating while the stainless steel version comes satin finished. I really like the look of that TiNi coating – it’s a handsome gun metal gray and mine has held up pretty well considering.

The Drifter’s blade comes in 8Cr14MoV. Anecdotally 8Cr14MoV is considered to be slightly better than 8Cr13MoV, but I really haven’t noticed a difference… apparently that extra chromium molecule does something. Fans of 8Cr13MoV will like this steel and those who don’t like 8Cr13MoV may find a soft spot for its high Chromium counterpart. I like it because it’s easy to sharpen, holds an edge reasonably well and has decent corrosion resistance.

Handle, Ergonomics and Pocket Clip

Depending on what model you get, the handle will be full stainless steel or G10 over stainless steel liners. Either way the handle is a simple minimalist design with two pillars and a lanyard hole. On the G10 version the liners aren’t milled, which begs the question, how light would this thing be if they did that? Honestly my guess is any weight savings probably wouldn’t be worth the premium in price. Both handles are nicely finished, they did a great job here.

At 3.6″ long, the handle of the Drifter is a decent size and will comfortably accept a 4 finger grip, even with larger hands. The G10 version is definitely the grippier of the two, and the black G10 has been given a nice light texturing. The SS version lacks any meaningful texture, but I have no problem with it for EDC. There is jimping on the thumb ramp and choil. It’s not super aggressive, but it gets the job done. All in all I think the ergonomics here are quite reasonable.

The clip is my only real source of constructive criticism. It’s a right hand tip-down carry only clip – not my first choice for positioning. I’d love to see the option to carry tip down, and preferably 4 corners style clip, but really for a $20 knife I think what we have here works.

Perhaps the best part of the clip is that it’s removable, and the small size of the knife allows you to carry it loose in your pocket. There is a lanyard hole which could be a nice option if you decide to go the “clipless” route – it should take hollowed out 550 cord without protest. I will say it is a sturdy clip, it rides sorta low and it’s been darkened in both versions (gunmetal grey like the handle for the SS version, black for the G10).

Deployment and Lockup

Deployment for both Drifters is very smooth – almost surprisingly smooth for such inexpensive knives. Thanks to the oversize thumb studs and metal washers it takes very little effort to get this knife ready for work. One minor thing to note is that due to the size of these thumbstuds the knife can get caught up on your pocket. That’s the tradeoff with having nice big thumbstuds.

Lockup on both the G10 and Stainless steel versions is solid. My stainless steel version has broken in a bit, but there is no blade play at all. My liner lock version bites in nice and early. Some may feel that the frame lock is stronger, but honestly I don’t think it particularly matters with these little knives. Both should handle all your EDC tasks without issue.

CRKT Drifter Review – Final Thoughts

All in all I really like both the Drifters. For well under $25 a piece, these are two high value blades that have absolutely been done right. You get a nice no-frills design that totally works. Good deployment and lockup, nice materials, solid fit and finish. Everything you would expect from a much more expensive knife. If I had to find something to complain about, it would be the lack of placement options for the pocket clip, but even then I think the clip is passable. Again, for ultra light weight EDC I’d go with the G10 version, but you really can’t go wrong with either knife (or both!).

CRKT Drifter EDC Folding Pocket Knife: Everyday Carry, Gray Ti Nitride Blade, Thumb Stud Opening, Black G10 Handle, Pocket Clip 6450K

Exceptional Grip: G10 handle provides exceptional grip in all conditions
Enhanced Protection: Gray titanium nitride coating improves corrosion resistance
Easy Opening: Thumb stud allows for fast opening with one hand
Limited Lifetime Warranty covers any defects in materials or workmanship, see company site for details

CRKT Drifter EDC Folding Pocket Knife: Everyday Carry, Gray Ti Nitride Blade, Thumb Stud Opening, Stainless Steel Handle, Pocket Clip 6450S

Classy Appearance: Satin finish blade has a modern look
Ultimate Durability: Stainless steel handle withstands hard use
Brute Strength: Frame lock utilizes a thick lock bar to secure the blade
Limited Lifetime Warranty covers any defects in materials or workmanship, see company site for details

I recommend buying the CRKT Drifter at Amazon or BladeHQ. Thank you for reading!

CRKT Ripple Review

by Dan Jackson 17 Comments

Last Updated: August 4, 2019
The CKRT Ripple is a design that had me doing a double take. The flowing lines and sharp looks were very “Ken Onion-y” and upon closer inspection the knife was in fact designed by Ken Onion. It turns out Mr. Onion has parted ways with the folks at Kershaw and he has been picked up by competitor CRKT.

Buy the CRKT Ripple at BladeHQ

Buy on Amazon

The Ripple was one of Ken’s first designs for CRKT. It’s something of a gentleman’s EDC knife, with Ken’s signature flowing curves in a low profile package.

General Dimensions and Blade Details

The Ripple comes in a few sizes. What you see here is the large version with a 3 1/8″ blade, an overall length of 7 1/2″ and a weight of 2.9 ounces. This is a nice size for an EDC knife. Not only is the Ripple lightweight at under 3 ounces, but it’s thin too. The whole knife is less than 5/16″ thick. Plenty of blade in a lightweight package. It’s a slim design that begs to be carried.

The blade is an attractive drop point design. There is an absence of the typical organic curves that Ken Onion is known for, but it still has his style and I find myself wanting for nothing. This is a really slender and refined blade and it comes with an exquisite tip. The swedge running 3/4 of the top of the blade is another elegant touch and the high hollow grind makes this a nice slicer as well. Personally, I love this blade shape.

CRKT has released this knife in several different steels over the years, but 8Cr14MoV is going to be the most common configuration. 8Cr14MoV has been discussed at length before, but this is a Chinese steel that is best known for being expensive, easy to sharpen, and holding an adequate edge. It’s on par with AUS-8, but below VG-10 and 154CM in the steel hierarchy. Feel free to check out my knife steel article for more information on different types of steel.

Handle, Ergonomics, and Pocket Clip

The handle of the Ripple is either made of 420J2 stainless steel (the framelock version) or aluminum (the linerlock version – shown here). The handle pieces have first been CNC milled with a ripple pattern. The handle has then been either a blue or black titanium nitride coating and then has been rubbed to reveal the silver look of the steel. It is a very unique look and can be difficult to capture in photographs although darkchild69, our featured photographer, has done an excellent job here. Another design element is the series of 44 small holes milled into the side of the handle. This is more for decoration I think, although it does lighten the handle up slightly. Finally, the handle is bolted together with two pillars. Very simple and as always, very easy to keep clean. This is a very slim handle and all the detail is unlike anything else currently on the market.

This is a thin metal handle so logic would suggest that this won’t be the most comfortable knife. In fact, the ergonomics are surprisingly good. The handle has been rounded and the flipper helps define the choil. Additionally, there is nice jimping on both the thumb ramp and handle. This provides plenty of traction and makes this a very easy knife to use for general tasks.

The clip is another interesting component. It is mounted high for tip down carry. It sits flush with the top of the handle and follows the line of the handle. One gripe is that the pocket clip it is tip-down right hand carry only. With the assisted open and the flipper, I can totally see why CRKT opted for tip down carry, but with 44 holes already in this knife, they really need to drill a couple more and make this clip ambidextrous.

Deployment and Lockup

The Ripple is a non-assisted open knife actuated by a flipper on the back of the handle. Those familiar with Ken Onion’s Leek, Chive, ZT 302, etc will be very familiar with this style of deployment. The flipper has been given some aggressive jimping that really bites into your thumb, you will not be slipping on this flipper. There are no thumb studs.

An interesting feature of the Ripple is the IKBS opening system. IKBS stands for “Ikoma Korth Bearing System” and means just that. There are a total of 16 ball bearings (8 per side of the blade). The bearings are uncaged and sit in little grooves machined into the handle and are used in place of teflon or phosphor bronze washers. Initial impressions are very good – the bearings make for a very fast and smooth deployment. This is one of the smoothest opening knives currently on the market (production blades at least). The IKBS combined with the assisted feature makes for effortless blade presentation. And apparently the bearings do not need much maintenance, which is good because I would not want to take this knife apart.

Here is an update from 2019: Over the past 8+ years I’ve owned countless bearing equipped knives. Generally they have held up real well. The versions with caged bearings are easier to take apart. This IKBS equipped knife includes loose bearings. You can take these knives apart too, but you need to be careful. Here is a great video from CRKT on how to clean an IKBS equipped knife.

The Ripple uses a steel frame lock, which is plenty strong for the kind of EDC tasks this knife was designed. Due to the intricate design on the handle you can hardly tell the framelock is there. I like how this looks and I also like how the framelock and adds to the simplicity of the design. However, I have noticed on multiple knives, the framelock extends very far over (see below) while others lock up early. Frame locks are designed to slowly break in and will travel over with extended use. Having the lock engage “late” from the start means that you may get less life out of the lock. If you get a Ripple with this late lock up, I would recommend talking with CRKT and getting it fixed because in my opinion, this shouldn’t happen with a new knife.

Here is a parting size comparison with my Boker Plus Urban Trapper:

CRKT Ripple Review – Final Thoughts

The Ripple is a beautiful knife. Ken Onion took a sexy blade shape and melded it with a wonderful handle. This knife “flows” from an aesthetic standpoint and I think the design is just phenomenal. The IKBS is both interesting and functional, long term testing will tell if this is a mere novelty or truly a revolutionary way to deploy a blade. The Ripple is made in Taiwan, which we now know (thanks to Spyderco) is capable of making some great higher end blades at a terrific value.

All things considered the CRKT did a great job with the Ripple. I would prefer if they re-worked the pocket clip so that it was ambidextrous, and a little less weird, but beyond that you get a lot of nice knife for the money. The Ripple is one of the knives that laid the foundation for Ken Onion / CRKT collaborations, and continues to be a great lightweight high value option for folks years after its original release.

CRKT Ripple EDC Folding Pocket Knife: Gentleman Everyday Carry, Satin Blade, IKBS Ball Bearing Pivot, Liner Lock, Textured Aluminum Handle, Pocket Clip K415KXP

Fast Opening: IKBS ball bearing pivot deploys the blade fast
Fast Opening: The flipper deploys the blade fast
Strong And Lightweight: Aluminum handle combines strength with minimal weight
Designed by Ken Onion in Kaneohe, Hawaii
Limited Lifetime Warranty covers any defects in materials or workmanship, see company site for details

I recommend buying the CRKT Ripple at Amazon or BladeHQ. Thanks for reading and Stay Sharp.

Spyderco Tenacious Review

by Dan Jackson 19 Comments

Last Updated: December 1, 2019
I found the Spyderco Tenacious when I was looking for a good sized EDC knife on a budget. I did some research and saw that the Tenacious ticked a lot of my boxes.

Buy the Spyderco Tenacious at BladeHQ

Buy on Amazon

At the time I was interested in a knife with a full flat grind, a large plain edge, G10 handle scales and pillar construction. The Tenacious had that and more – all for under $50. So I ordered the knife and had it at my door a couple days later. The following are my thoughts on the Tenacious after using it as a daily carry for several months.

General Dimensions and Blade Details

The Tenacious has an overall length of 7-3/4″, a 3 3/8″ blade, weighs 4.0 oz, and is made in China. The blade is not only long but it is fairly wide (from edge to spine) at almost an 1.5″ inches. This is a large knife for EDC (Every Day Carry), and people contemplating the Tenacious for that use may prefer it’s smaller brother, the Persistence or the Ambitious. Here is a size comparison with the Mini Griptilian and Kershaw Skyline so you can see what I mean:

It’s a big knife. Not so much how long it is, but the combination of how long and wide it is. It’s a little more at home next to a full size Benchmade Griptilian and a Spyderco Paramilitary 2:

For this reason, the Tenacious is more of a large utility knife than a true EDC. Sure, it can be carried every day, but it’s a good size knife.

The leaf shaped blade of the Tenacious is made of 8Cr13Mov Stainless steel. 8Cr13Mov is a more inexpensive steel that is comparable with Aus 8. However, Spyderco does an excellent job with the heat treat on this steel and my experiences have found that 8Cr13Mov sharpens well and holds a good edge. That said, compared to harder, more expensive steels you will have to sharpen the knife more frequently.

Also, I really like the full flat grind on this knife. It is like a small kitchen knife and is great for slicing, especially through cardboard. That full flat grind just zips through cardboard. The shape is fairly generic, but there is enough belly for EDC tasks

Handle, Ergonomics and Pocket Clip

The handle is a of pillar construction, which I really like because it makes the knife easy to clean. The handle is layers of steel with G10 scales. The steel has been milled out to reduce the weight, which is a great touch that I love to see on a cheaper knife. The G10 is lightly textured and feels good. It isn’t super abrasive so your pockets will be spared, but it offers nice tactile feedback. I haven’t had any problems with the knife slipping out of my hand, probably because the ergonomics are so good. The G10 has been contoured around the liner lock and there is very good jimping on the thumb ramp and the lock, this makes the knife very easy and comfortable to use.

The ergonomics on the Tenacious are quite good. It has a pretty big handle and it has been well designed. My palm fits nicely and the corners have been rounded slightly for comfort. Also the knife is designed to provide the user good traction, which I find to be important for a mid sized folding EDC knife like this. Since it is a cheap knife, I have a tendency to have it do my “dirty work” that I wouldn’t subject some of my more expensive knives too. The large thumb ramp and jimping really helps keep your thumb in place and maintain control when putting some power behind the blade. I’ve used this knife pretty hard and “Tenacious” is an apt name because it keeps on ticking.

Pocket clips can be a problem with expensive knives, let alone cheap ones, so I was really pleased with the clip on the Tenacious. It’s a signature Spyderco Hourglass shaped clip that provides good pocket retention without shredding your pants up. Also the clip is mountable on all 4 corners of the knife, so you can carry this knife in your left or right pocket, tip up or tip down. As a lefty on a budget, I loved this feature. The knife rides pretty low in your pocket.

I will say that my clip had a tendency to come loose until I hit it with some lock-tite. My guess is that you are going to want to do the same.

Deployment and Lock Up

The deployment on this knife is very nice. The thumb hole (“Spyderhole”) makes it easy to access the blade with bare hands or gloves – in rain or shine. The action is smooth, thanks in part to phosphor bronze bushings. The bushings on this knife are apparently pretty thin, but I’ve been flicking this knife open for months and it still deploys very smoothly.

Also, the lock on this knife is solid. The Tenacious uses a thick liner lock that bites deep into the blade. I detect zero up and down movement when the knife is locked and a tiny amount of side to side movement.

Here is a parting size comparison with the Delica and Endura:

Overall Fit and Finish

So one thing that kind of concerned me about this knife was that it was made in China. At the time the Tenacious originally came out, there was a lot of stigma regarding Chinese manufacturing and Chinese knives. Today, with the advent of high end Chinese knife manufacturers like Reate, there is less of a concern, although certainly some of that original stigma still exists.

I will say that the build quality of the Tenacious is impressive considering the price. I am pleased with the fit and finish and whoever manufactured this for Spyderco did a good job.

Spyderco Tenacious Review – Final Thoughts

As I turn to my final remarks on the Tenacious, I think we should consider the topic of “value” – as that often plays in to the commentary on the Tenacious, and many consider this to be a “value” knife. To be honest, I think the knife is well priced right around $30. It’s a good amount of knife for the money, it’s well designed, the materials are adequate, the fit and finish is adequate – I really cant complain. That said, I would likely not pay $50, or $75 for this knife, and think it is priced appropriately for what it is.

The Tenacious rounds out Spyderco’s product line nicely and is an affordable knife that has all of the design elements and features Spyderco is known for. I like the Tenacious and recommend it for someone seeking an affordable larger EDC knife, or a hearty utility knife that can be used hard guilt free.

Spyderco Tenacious Folding Utility Pocket Knife with 3.39" 8Cr13MoV Stainless Steel Blade and Durable Non-Slip G-10 Handle - Everyday Carry - PlainEdge - C122GP

Game Changer: Being tenacious means you are persistent and cohesive. It's being tough and tireless in achieving your best performance; all worthy descriptive words for a hard-use knife
Superior Blade Steel: The 3.39" 8Cr13Mov stainless blade is leaf-shaped and ground flat from spine to cutting edge for non-stop cutting performance.
A Secure Grip: It has a black G-10 laminate handle, Ergonomically milled with prolonged fatigue-free cutting in mind.
Easy-To-Use: The blade's shape coupled with an oversized Spyderco Round Hole and textured spine jimping allows you to open the blade and position your thumb on the spine in slip-proof confidence ready for work.
Pocket-Friendly: The Tenacious includes a Walker Linerlock and a 4-way pocket clip lets the folder be set in a variety of carry and draw positions: Tip-up/tip-down left-hand/right-hand.

I recommend buying the Spyderco Tenacious at Amazon or BladeHQ. Buying anything through any of the links on this website helps support BladeReviews.com and keeps the website going. Any support is greatly appreciated. Thank you very much.