440C

Spyderco “S” – Discontinued But not Forgotten

Jealousy is often referred to as the Green-Eyed Monster. Being a little sister, I am all too familiar with this emotion.

As a kid, my big brother always had the nicest and newest gadgets. He is also incredibly smart, so he had the best grades. I looked up to him and was inspired to think that maybe someday day I’d have the nicest and newest things. Maybe I would be even smarter than him…

That last one didn’t come to fruition, but to this day, I strive to get something nicer and newer This determination peaked one summer day before my freshman year in college.

On that day a window was opened into the world of extraordinary pocket knives when my brother showed me his newest purchase. It was a Spyderco “S” Black. When I saw it, my hazel eyes turned to green.

This knife didn’t have a solid metal handle, it was intricately carved out like a web. Once the blade was revealed, I was blown away. The whole knife was one incredible black and silver web. I had never seen anything that strong look as though it might fold under the slightest pressure.

How was this possible for Spyderco to combine a delicate façade with such interior strength? Well, that’s easy to explain. The almost 2.5” long blade has been shaped, not cut out, to look like a web by a process called metal injection molding.

Basically, there are four ingredients, steel (which is Taiwan produced 440C steel), a binder, metal powder, and heat. The first three ingredients are mixed together and then molded to shape. Once in the shape the ingredients are sintered, or heated, to combine into a solid material.

The “S” was produced with option to choose between two different handle colors, black or silver. Both are made of anodized aluminum that has been cut with the same web pattern as the molded blade. It should come as no surprise that the entire knife weighs only 2 oz.

A wire clip is attached to carry in the tip-up position only but can be changed for left or right-handed carry. It’s a great length at 3.5” but the wire clip is positioned somewhat low on the handle so the top is visible when carried in a pocket.

Opposite of the blade in the handle is a Compression Lock. This incredibly strong lock has been developed and patented by Spyderco. It compresses just behind the blade and pops into place once open. The lock releases by pushing in on the tab and folding the blade back down. With four finger grips, you can be assured of a secure hold when cutting.

Fortunately, my eyes didn’t stay green for long. A few years later I was able to purchase my very own shiny, and new, “S” Silver. By far the best purchase I’ve made and one of my top five favorite knives of all time.

Even though the “S” isn’t an everyday use knife for me, it’s perfect for a special occasion or when you want to impress your friends. Unfortunately, Spyderco no longer makes the “S”, but if you want one bad enough, you’ll find it. Don’t let that Green-Eyed Monster get the best of you.

Editor: I hope you enjoyed this guest post from Jennifer Wood. As the PocketKnifeHousWife, she definitely brings a different perspective from your average knife reviewer. Jennifer and her reviews can be found at PocketknifeHousewife.com. Follow her on Instagram @Pocketknifehousewife or Twitter @PktHousewife.

Boker Plus S2 Review

by Dan Jackson 18 Comments

Last Updated: August 30, 2019
I’ve been drooling over Sniper Bladeworks custom knives for a long time now. For the uninitiated, Sniper Bladeworks is the brainchild of Lance Abernathy and Jody Muller. Jody handles fabrication and Lance comes up with the designs. The result has been a number of award winning tactical knife designs and superbly built tools that are revered by collectors and users alike.

Buy the Boker Plus S2 at BladeHQ

Buy on Amazon

The Boker S2 is Sniper Bladeworks’ first collaboration with a production company. I recently got my hands on one of these knives and was really impressed by how well the knife worked and the level of fit and finish. The intriguing design lead me to contacting Lance himself in order to gain some insight on this unique knife. Lance was able to provide some of the details and explain why the S2 was built the way it was. It was a real pleasure speaking with Lance, and I hope our conversation helps provide a better review.

General Dimensions and Blade Details

It should be no surprise that Sniper Bladeworks focuses on tactical knives. Lance comes from a heavy law enforcement background and served on a SWAT team for over 11 years. The Sniper Bladeworks custom knives are all built with utility, ergonomics and aesthetics in mind. The S2 is no different. This is a big knife so I would put it in the tactical and/or utility role. I think it’s big for EDC, but it doesn’t look that threatening so it could be a good choice if you like to carry a bigger knife.

The S2 has an overall length of 8-3/4″, a 4″ blade, weighs 5 ounces, and is made in China. This is not a small knife. By way of comparison, I find it holds it’s own next to a Spyderco Military (which also has a 4″ blade, but has a total length of 9 1/2″).

The blade is a big piece of 440C stainless steel. Boker uses a lot of 440C in their plus line and I welcome it with open arms. It’s a good mid-range steel and an all around performer. The width of the blade is impressive and it has a large flat grind that begins almost at the top of the knife. The long curved spine drops off into a nice functional tip. This tip isn’t reinforced and the overall bladeshape is faintly reminiscent of a sheepsfoot shape. Naturally there is a lot of utility with this blade for day to day tasks. I also think this could possibly serve as a rescue knife. And naturally I think the knife could also be used as an emergency defensive tool too. The excellent slicing capabilities of the flat grind mean you could use this knife for anything from cutting seatbelts to preparing food.

Finally, I wanted to comment on the stone wash Boker applied to this blade and hardware. It’s a rough and tumble stonewash and it has created a nice effect. Between the design and finishes of this knife, I get a really utilitarian vibe, and this knife just begs to be used.

Handle Details

The handle is one of the most interesting aspects of the S2. It’s construction is simple enough, with black G10 over matte gray steel liners. The liners have been milled to reduce weight and a black G10 backspacer runs a little over half the length of the handle. All in all, construction is good and all the pieces line up flush with no gaps or irregularities.

Ergonomics on the S2 are pretty special, and it’s where the knife really starts to shine. At first glance the handle is boxy looking and doesn’t appear to be that comfortable. I’ve heard some go so far to say that the handle is “ugly” – I disagree, but to each his own. I’ll say it’s a somewhat unconventional shape, but it really works in your hand. First off, it’s a pistol grip, meaning that the handle attaches to the blade at an angle and naturally orients the blade towards the cutting surface. Lance told me they like this style of handle because it puts the tip on target without bending the hand. In my experience, this design totally works.

The flat back of the handle fits the palm perfectly and your thumb falls into a nicely jimped thumb ramp. When I first picked up the knife I felt like this was a blade I could get some work done with. The flipper also acts and integral guard/choil so your whole hand wraps around the knife nicely. It’s a clever design and the guys at Sniper Bladeworks made the handle plenty big so you have lots of room to move and use various grips.

As a final touch there are some grooves milled into one side of the handle. This provides some extra grip to the already nicely textured G10 and adds some visual interest as well. Lance told me that they like designing knives that look good open and closed – the lines to add a little something extra.

The S2 actually ships with 2 pocket clips, for tip up or tip down carry. Its a good size clip that rides low in the pocket. Retention is good and I found it to be easy to insert into my pocket. Unfortunately the handle has been drilled for right hand carry only.

Deployment and Lock-up

The S2 is deployed by a large flipper on the back of the handle. This knife quickly broke in and I find that deploying this big blade is effortless. I think a flipper was a good idea for this wide blade because your thumb would have to travel far to fully activate a thumb stud. No complaints with the deployment of this knife.

Lockup is achieved through a liner lock. This is a pretty thick liner lock and it engages early with a crisp snapping sound. I found it to be easy to disengage, but because the handle isn’t cut away it does take a little more effort than other knives with a cutout for your thumb. I think for most tasks the liner lock will be more than adequate.

Boker S2 Review – Final Thoughts

All in all I am very pleased with my S2. To be honest, I can’t find a major fault with the knife (the lack of an ambidextrous pocket clip would be my biggest complaint). I think Boker was smart to pick up this cool design from Sniper Bladeworks. When I spoke with Lance he said that they wanted to create something big and functional – just like one of their custom pieces. I think Boker executed that concept wonderfully, as the fit and finish is very high on this knife, with the country of origin being China.

When you consider that the S2 can be acquired for around $50, it’s a pretty good value. I won’t be able to afford a custom anytime soon so this is the closest I will be getting to a real Sniper Bladeworks knife for a while.

Boker 01BO160 Plus S2 Knife with 4 in. Straight Edge Blade, Black

Durable and sharp 440C stainless steel blade
Structured G-10 scales for maximum stability
Reversible clip for tip-up or tip-down carry
Blade Length: 4 inches. Overall length: 8 3/4 inches
Limited lifetime warranty

Buy on Amazon

I recommend purchasing the Boker S2 at Amazon.com and BladeHQ. Thanks for checking out the review.

Boker Plus Exskelibur I (01BO001) Review

by Dan Jackson 10 Comments

Last Updated: August 11, 2019
Every now and then I see a knife that I absolutely have to own. Now, believe it or not, my collection of knives is small in comparison to the size (and value) of many knife collectors, so I like to think I exercise some “restraint” in my purchases. This might have more to do with the size of my bank account than anything else, but my point is, this knife really struck me as something special, and I bought it. I am talking about the Boker Exskelibur, a collaboration between Boker Knives and South African custom knifemakers Mike Skellern and Fred Burger.

Buy the Boker Plus Exskeliber at BladeHQ

Buy on Amazon

The Exskelibur is part of Boker’s “Plus” Line which is their line of high quality value knives. For purposes of the review I would classify the Exskelibur as a EDC knife, and perhaps even a collectors knife. I know mine wont be seeing much use even despite the very reasonable price tag – I simply want to keep this knife nice for my collection. What we really have here is a gentleman’s folder; it’s simple lines and rich titanium accents make the Exskelibur an exercise in minimalism and elegance that will feel very at home in an office or carried during a formal event.

I have found the attention to detail and build quality on this knife to be extraordinarily high. What may be most surprising to some readers is that this knife is made in China. Now, my Spyderco Tenacious review showed that Chinese manufacturing isn’t always synonymous with low quality, but the Exskelibur isn’t just well made for a Chinese knife – it’s well made for any knife.

General Dimensions and Blade Details

The Exskelibur I has a 3 5/8″ blade, an overall length of 8″ and a weight of 3.3 oz. Due to the advanced handle construction almost all of that weight is in the blade. And speaking of the blade, what a beautiful piece of steel. It’s a large and simple drop point design with a high hollow grind. The blade has been given a nice satin finish that glows under the light of my studio. What strikes me about the blade is how big it is relative to the handle. The blade to handle ratio is very impressive and has to be close to 1:1.

The steel chosen here is 440C, which is a mid grade steel that is very popular in European knives. Seeing how this is a mid range knife I was very happy to find 440C here, it is one of my favorite all purpose knife steels. 440C is capable of taking a very keen edge and my Exskelibur I came shaving sharp right out of the box. The blade is beautifully finished and has a “Boker Plus” logo on one side and a Skellern logo on the other.

Handle, Ergonomics, and Pocket Clip

The handle follows the same minimalist approach of the blade, while weaving in a couple interesting features that really elevates the style and sophistication of the knife. The handle is made almost entirely out of black G10. The G10 is very lightly textured and doesn’t offer much in the way of friction, however the there very good jimping on the spine of the knife and the handle has been contoured to allow your fingers to wrap around it comfortably. The resulting grip is very good for normal EDC tasks. I think the texturing is adequate and fits very well with the overall classy theme of the knife.

The construction of the handle is not open, a piece of G10 runs the entire back length of the handle and in between that piece and the handle slab is a thin strip of red G10. This is purely for aesthetics and is a very interesting detail that makes the Exskelibur a little special and is really quite cool.

The pocket clip is a piece of titanium that has been finished in a dark matte blue. It’s a little stiff but it performs well and is reversible for tip up or tip down carry (right side only). The clip is held in place by 3 small Phillips screws which is a bit of a departure from the allen or hex screws we often see. Another thing to note here is that there isn’t a lanyard hole in this knife. Since this is a larger EDC knife, I really don’t miss the lanyard hole, but I thought it was worth pointing out.

Deployment and Lock

The Exskelibur deploys with an unobtrusive flipper located on the back of the blade by the pivot. This is a very simple yet effective method of deployment. The blade moves easily and I find that I can quickly and easily open this knife with 1 hand. The bushings on this knife appear to be phosphor bronze and everything is very smooth. The knife opens quietly with a soft click as the blade snaps into the titanium liner lock.

There is only one liner on the Exskelibur and it is made of the same blued titanium that clip is fabricated from. It makes the knife incredibly lightweight and it provides another interesting detail that sets the Eskelibur apart. I have found the lock to be strong and it locks in the middle of the open blade with no danger of slipping.

Boker Exskelibur I Review – Final Thoughts

The Exskelibur I is an outstanding folding pocket knife. The knife oozes style and is a simple and beautiful folder. I appreciate the great design and quality manufacturing and am not put off by the fact that this knife is made in China because the quality control here is outstanding. The titanium liners, the big sweeping blade and lightweight handle are all very appealing. I think 440C was an excellent choice for bladesteel and love how big and practical the blade is. It’s hard to find fault with the knife, I think if you use it as an EDC or gents folder you will be very pleased with the Eskelibur.

Boker Plus Exskelibur I Knife

440C satin finished blade
Blue anodized titanium liner
Contoured G10 scales
Red fiber spacer
Reversible titanium pocket clip

Buy on Amazon

I recommend purchasing the Boker Exskelibur at Amazon.com or BladeHQ. Thanks for reading.

Filed Under: Boker, Collectable Knives, EDC Knives, Folding Knives, Gentleman's Folder Tagged With: 440C, Fred Burger, Made in China, Mike Skellern