1095

ESEE-6 Review

It has been a while since I’ve reviewed a large fixed blade. Regular readers know I’m in S.W. Florida. It’s a nice place to live, but it’s not exactly a mecca of bushcraft. I mostly moved here to be by the beach. The land itself is either dry and scrubby, or dank and marshy. It’s a beautiful place to live in it’s own way, but was one of the last places in the USA to be settled for a reason.

Buy the ESEE-6 at BladeHQ
Buy on Amazon

And while I enjoy trimming trees on our tiny 1/4 acre lot and even having a bonfire a couple times a year, I’m no Ray Mears. Plus, I already have my big bushwacker – the ESEE Junglas. I’ll probably be buried with that knife. Maybe sooner than later depending on how this coronavirus plays out. Regardless, it’s my go to yard tool, and I’ve had it for almost a decade. Why mess with success?

Well, when you run a site like this, people have certain expectations. And they vary somewhat wildly. Since I’ve reviewed some outdoor fixed blades in the past (aka “survival knives“), some visitors may believe that I am duty bound to keep that section updated. And they make a good point.

So I want to keep reviewing survival knives. I enjoy them even if I can’t use them as much as I would like. So take the review with a pinch of salt. I don’t proclaim to be a bush master. I’m just a schlemiel with a knife review website and too much time on his hands.

One knife we have been missing from the website for years is the ESEE-6. And frankly, it’s missing from my understanding of the ESEE lineup as well. I’ve reviewed the smaller ESEEs, and the big Junglas, but haven’t touched anything between the 6 and 4. I’ve had Chad write on the ESEE-4, and Josh write on the Laser Strike, but I have to understand these knives as well. So here we go, a long needed review of the ESEE-6.

General Dimensions and Blade Details

The ESEE-6 has an overall length of 11.75″, a 6.5″ blade, and the knife itself weighs 12 ounces. This is a pretty big knife. It’s not a Junglas, which is more of a fortified machete, but it’s still pretty damn big. It could be a good choice if you are looking for something that packs a whallop for chopping tasks, something that can baton pretty big pieces of wood, yet is still reasonably packable, and is also usable as a knife rather than a machete or small sword.

Certainly this would be a good camp knife. It can carve, cut and chop with the best of them. And it’s stout. ESEE knives. are tough, and this ESEE-6 is almost 5mm thick.

Here is a family portrait with my Junglas and ESEE-3 for reference:

It could also be used in certain martial applications. While it’s not a dagger, I think this 6″ blade has pretty good reach for a hog hunt or in an emergency. So the ESEE-6 strikes me as a large all-round utility / combat knife. The trade off is the size and weight. I wouldn’t take this on the Appalachian Trail, but if I needed something robust for a camp out or day hike, then the ESEE-6 could be a good choice.

Let’s turn to the blade. Here you get 6″+ of powdercoated steel. The shape is ESEE’s classic drop point. It’s a subtle drop point, offering about 3″ of straight edge and a good 3″ of curving belly as well. Lots of room to work with the ESEE-6. The blade is simple. It’s fully flat ground and there are no swedges or anything like that.

Blade steel is 1095. 1095 is high carbon steel, and is the same steel found on their regular lineup. For those who don’t know, 1095 is not a stainless steel. In exchange for being not-stainless, you get a tough high impact steel that is easy to sharpen. 1095 holds a good edge when used on wood. I find it dulls pretty quickly when used to cut material like cardboard. However, it is very easy to sharpen. That said, you will get good life out of the edge assuming you will be using this knife more for wood and food prep rather than breaking down a pile of boxes.

The entire knife comes with ESEE’s thick powder coat. The offer the coating in various colors, but I prefer the classic look of black powder coat. I took pictures of this knife before I started using it. You can see how the coating looks new, and you can see on my Junglas how the coating will hold up after years of use. It wears pretty well, but it isn’t invincible. It will do a good job of keeping rust off of most of the knife.

Here’s another size comparison. This time I have it next to the Fallkniven A1:

It compares favorably to the A1, friends. That’s why I selected it. Also, both knives are quite thick.

Back to the blade. In practice this is an extremely capable knife. It’s big enough for significant chopping and batoning tasks, but it’s still small enough to use as a knife. Not my first choice for peeling potatoes, but you can certainly chop them up, whittle, etc. The trade off is that the ESEE-6 is significantly heavier than a knife like the ESEE-3. But with the 3 you won’t be chopping, and unless you are a talented woodsman you are going to have a hard time batoning anything significant with the ESEE-3 either.

Handle and Ergonomics

My ESEE-6 came with gray linen micarta handle scales with red liners. It’s a handsome look, and the gray linen micarta is beveled for comfort. ESEE also offers G-10 handles if micarta isn’t your thing, and their extra handle scales are reasonably priced.

Personally, I like the way micarta wears, and it offers excellent traction even when your hands get wet or sweaty. This is a full tang knife, meaning the blade and handle are one continuous piece of steel, and that tang extends down to the pommel. This provides room for both a lanyard hole and am impact tool. You can crack walnuts or crack skulls depending on what the situation requires. Nice.

The ESEE-6 comes with a comfortable “Cadillac” of a handle. There is plenty of room, and there is a forward finger choil if you need to choke up on the blade. The micarta handle fills the hand and offers plenty of traction. ESEE included an inch or so of jimping on the spine of the blade. It’s aggressive jimping and is the kind that is better suited for gloved hands. Personally, I find the jimping to be a bit much for a naked hand, but that’s just me.

In practice I found this handle to be comfortable for extended use. This whether you use gloves or not. I tend to avoid gloves and did not run into issues with hot spots. The jimping I could live without, especially for crunching cuts, but I understand why ESEE put it there. All in all, it’s a comfortable handle. However, I prefer the edge radiusing (contouring) on the handle of the Junglas over the ESEE-6.

Sheath

The ESEE-6 comes with a high density thermoplastic sheath. It’s riveted and is built similar to a kydex sheath (pancake style). As usual, the quality is there. The sheath is nicely finished and holds the knife securely in place. There is a small amount of rattle, but nothing crazy. It takes a fair amount of force to pop the knife out of the sheath with your thumb, and ESEE included a short run of serrations on the sheath for that purpose. This knife is not coming out accidentally. They also included a drain hole in the bottom of the sheath and plenty of rivets for mounting options.

While you can lash this sheath to something or use MOLLE clips, I suspect most people will want to use the included belt clip. It mounts easily and securely to the sheath with the included hardware and allows for amibidextrous up or down carry. All the components of the sheath and belt clip are simple and of high quality. The plastic is dense, the steel clip offers a good blend of ease of use and high spring strength, and everything is set up to provide years of trouble free use.

Here is a better shot of that spring clip. The spring clip easily slides over a belt, so you can add or remove the sheath without taking your belt off. Once you have a sheath with a clip like this, it’s hard to go back to your standard sheaths with a belt loop.

ESEE-6 Review – Final Thoughts

Once again ESEE demonstrates their ability to make a high quality fixed blade knife and sheath. Everything is thoughtfully designed, made of high quality materials, and finished neatly. Oh, and it has all been made in the USA and is backed by one of the most comprehensive warranties in the business. They are on the expensive side, but I’ve found when you buy an ESEE fixed blade you are going to get a no-bullshit product that is designed for the long term. My Junglas and ESEE-3 are excellent examples of that, and I’m happy to add this ESEE-6 to the permanent collection. I have no doubt that it will serve me well for years. That said, if something happens I’ll update the review.

Perhaps the hardest part of selecting a knife within the ESEE catalog is settling on a single piece. The ESEE-6 is substantial, so that’s arguably it’s biggest potential problem. If you are looking for a knife to take on extended hikes, then you will likely want to give this one a pass. But if you are looking for something to use on a campsite, or packed into a truck, or even used in the yard, then I think the ESEE-6 has a lot to offer. Also, while I’m fond of my Junglas, it’s not usable as a knife. The ESEE-6 strikes more of a balance between a compact chopper and a utility knife.

ESEE Knives 6P Fixed Blade Knife w/Molded Polymer Sheath

Editor: I recommend buying the ESEE-6 at BladeHQ or Amazon. Thank you for reading.

ESEE Laser Strike Review

by Josh Wussow 9 Comments

Alright, I’ll admit it – I’m a huge fan of ESEE Knives. I own a Candiru, Izula-2, and JG3, and I’ve had the pleasure of reviewing an exquisite PR4. So, when the opportunity to sample their Laser Strike model landed in my inbox, you can guess the speed of my reply.

Buy the ESEE Laser Strike at BladeHQ

Buy on Amazon

While I’m hardly alone in this enthusiasm, much of the halo surrounding ESEE comes from inside the blade-enthusiast bubble. Their American-made pedigree and bulletproof warranty are great for nerds like me, but what about the regular folks who buy their camp knives at Walmart? Tell them you spent $115 on an outdoor blade, and they’ll shoot you some pretty strange looks.

I know this, because it’s exactly what I did. After a few weekends racing around the yard, the Laser Strike’s final lap came on an overnight trip to Devil’s Lake State Park in Wisconsin. A few of my friends were testing their camping kits, and they invited me along for the ride. We had a wonderful evening exchanging questionable decisions: Me, teaching them how to baton through logs and them introducing me to, well…

Don’t drink and play with knives, kids. Now, onward before that stuff kicks in.

General Dimensions and Blade Details

In a brand known for its rugged offerings, the Laser Strike stands out as a damage-duty champ. You’re looking at 10-inches of full tang 1095 carbon steel, with a blade nearly as thick as three US quarters stacked together (0.188-inches).

The blade length is a rangy 4.75-inches, 4.5 of which are sharpened. Its flat grind features ESEE’s rugged “Black Textured Powder Coat” over a 1.38-inch width, broken only by the maker’s marks. The knife’s total weight is 9.5-ounces, which is around half as much as a youth-sized aluminum baseball bat.

Now, let me be clear about the provenance of this particular tool. ESEE was kind enough to send it to notorious Youtuber and (I’m directly quoting him here) “big piece of doo doo” Advanced Knife Bro, who agreed to send it my way after mercilessly pummeling it.

As expected, the blade arrived in need of some love. But, that’s one of the beauties of 1095 – It’s easy to whip back into shape. A quick cleaning and Sharpmaker session were all it took to bring the edge back to shaving sharp. But, with a pile of firewood in the garage and a camping trip on the horizon, it didn’t stay that way for long.

So, how did it do with fire prep? Come on – It’s an ESEE. It powered through a half-dozen camp logs without so much as a hiccup. What really shocked me was its prowess at the picnic table. Our menu on this mosquito-rich evening featured ribeye steaks and flame-grilled veggies. I was recruited to help slice onions, peppers, and mushrooms on a small cutting board, which was probably just as thick as the ESEE’s blade. Here’s how things turned out:

Surprised? I certainly was. While it’s certainly no santoku, the Laser Strike turned out to be a more than adequate prep tool. And this was after I’d batoned through several pieces of damp firewood. You won’t be producing translucent onion slices, but for rustic fare like this, the ESEE is surprisingly adept.

Handle and Ergonomics

I love the way that ESEE’s tend to hold my hand. Is that creepy? Too bad, the statement stands. The company’s canvas micarta is on point, and the forward choil fits my index finger perfectly. I also enjoyed the widely spaced jimping, positioned at the step-down transition from blade to handle. It provides excellent traction for my thumb without any discernable discomfort.

A quick aside, for the sake of comparison: I took several knives on this camping trip, including my beloved L.T. Wright GNS and the Condor Swamp Romper (which I gave away to a buddy who didn’t know any better). I encouraged my friends to handle each blade, and the Laser Strike’s scales were the runaway favorite. This could be considered anecdotal, sure, but it was interesting to get some perspective from folks who’re just getting into the knife hobby.

Now, let’s take a moment to discuss the stuff inside the handle. See that metal washer hanging from the base of the sheath? Well, it’s not just for show. This metal disc acts as a flathead driver, allowing you to remove the handle scales. Stowed within are a fire steel and a couple tinder pellets, all included as part of the overall package.

This further pushes the Laser Strike’s “Survival Knife” image, though I do have a few qualms. While certainly serviceable, this small fire steel is pretty difficult to spark. And, given the powder coat, the only available striking surface is (shudder) the blade edge. Sure, the sharpening choil might work, but I’d need to be in a real-life “Fire or I perish” sort of situation before doing that much damage to the cutting surface.

The Laser Strike has another option built in. See that divot on the right handle scale? That’s for a bow drill, allowing you to make fire in an even more bushcraft-friendly fashion. Inefficient? Sure, but 100% cool.

Sheath

The Laser Strike ships with a black Kydex sheath setup, including an ambidextrous clip plate and the aforementioned lanyard/washer combo. It’s a far cry from the leather of the Camp Lore knives I’ve been testing, falling more into the ESEE’s number-knife family (3, 4, 5, etc.).

Retention on the Kydex is good, though it’s absolutely possible to shake 9.5 ounces of knife out of its grip with enough downward thrust. Tension can be adjusted using the sliding screw and washer above the choil area, so you can tighten things up if you feel the need. I like ride height, despite my usual preference for leather danglers. It also manages to be fairly slim, making the knife carry much easier than one would expect from a blade of this heft.

ESEE Laser Strike Review – Final Thoughts

Going into this review, I had no doubts about the Laser Strike’s capabilities as a field-first tool. But it impressed me in every application, from batoning to carving to cooking. Expectations aside, part of the joy of this particular test came from the look on my friends’ faces as they watched me hammer it through our firewood, and the smiles when I handed it over and said “Give it a shot.” Being able to follow up with “You’re not going to break it” and watching them realize it was true – Man, that was a neat moment.

Sufficed to say, I’m completely sold on the Laser Strike as a heavy-duty hacker. It’s not going to replace your smaller blades for ultralight outings and day hikes, but it’s a super-solid addition to a hard-use loadout or car camping kit.

Thanks again to ESEE Knives and Advanced Knife Bro for allowing me to check it out.

Sale

Laser Strike Knife, Black Blade, Micarta Handles, Kydex Sheath

Made in: USA
Category name: knives
Made in USA or imported

Editor: I recommend purchasing the ESEE Laser Strike at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

GEC #15 Tidioute Boy’s Knife

by Aaron Shapiro Leave a Comment

I was just reading some statistics about Great Eastern Cutlery: in 2007 GEC produced approximately 7300 knives whereas in 2017 it’s nearly 30,000 pieces. This is remarkable in today’s hyper competitive EDC pocket knife market. That’s a 310% increase over ten years for a traditional knife company. Admittedly, these numbers are based on hearsay, but a glance at the production totals on GEC’s site show there’s some basis for them.

Buy the Boy’s knife at BladeHQ | KnivesShipFree | GP Knives

I’d like to think that the focus on traditional knives is born out of a perspective shift within the EDC community, perhaps away from the overbuilt tactical to the purpose-based smaller utility folders? It’s hard to say at this point, but just from observing the ripe secondary market it’s clear that slipjoint fever is on fire these days.

Today, we’re looking at the GEC #15 Tidioute Boy’s Knife, a well rounded and sized EDC slip-joint at a very accessible price point. Based around the traditional “Sleeveboard” pattern, these are sometimes also made into barlows with full steel bolsters. A “Boy’s Knife,” is generally characterized by their diminutive size (generally between 2.75″ and 3.25″ closed), the idea being these could be a child’s first pocket knife. These were most often spearpoint bladed pieces, but we’re seeing a lot of variety now in the modern iterations. But, before we get too far into that, let’s hit some specs:

Blade: 2.5”
OAL: 6.187”
Thickness: .43”
Blade Thickness: .09”
Steel: 1095 Carbon Steel
Weight: 1.8oz
Lock: Non-Locking Slipjoint

(These are my personal measurements made with my calipers and my faithful (pink) ruler. The manufacturer’s published numbers may vary.)

Blade

The #15 pattern by Great Eastern Cutlery is an amalgamation of several different knives they offer in the same size. I’m aware of a Wharncliffe version (Navy Knife), Wharncliffe with a cap-lifter/prybar type tool (Crown Lifter), Special Run Barlows (TC’s), and then the Spearpoint (Boy’s Knife) featured here. There are very likely other versions that I am not aware of out there, the world of GEC’s is deep and wide.

In my opinion the Boy’s Knife in spear point offers one of the more versatile blade shapes out of the GEC offerings. The blade has a straight back for nearly three-quarters of the length before descending into a fine point. GEC has also opted for a small swedge running nearly the entire length of the blade. I think that this offers a little dimensionality to what would otherwise be a very simple blade shape. In practice what I have found is that most of the knives that Great Eastern makes have very nice, thinly ground blades. Case in point, the #15’s blade I have has been taken down to .012 behind the edge… this thing screams through paper.

In practical use, I’ve found the #15’s blade to be a generally good fit for most of what I do. I think the spear point works well for piercing tasks and the thinness of the edge really excels for slicing. I wind up breaking down a lot of boxes at work and it only takes the lightest touch to break the tape.

As for steel, 1095 is a tried and true performer, high carbon, generally taken to 58-60HRC, I’ve had great experiences with it both in cutting and sharpening. It will stain or rust, so I’d suggest oiling the blade and spring with mineral oil or something similar (but not too much, some good use patina is cool.)

Handle and Ergonomics

The Boy’s Knife handle is a simple teardrop shape with micarta scales and a short steel bolster over steel liners. Construction is pinned. There are many options for scale material, but I opted for a micarta handle.

The handle offers a full grip for me, which is surprising to me since the knife appears to be so small on paper. The small teardrop shape doesn’t offer what I’d call a “secure grip,” but in the use case scenario for a small slip-joint, I tend to think this is more than adequate. When the #15 gets put to work cutting up cardboard boxes I’m careful with it as this is a smaller handle and the grip is not as secure as a full size knife.

I’d recommend a full size GEC if you intend to use the knife routinely for harder tasks like breaking down lots of boxes, but this knife is fine for light EDC use and the occasional package.

There is no pocket clip on this knife, so no need to comment on that. Often these knives are carried in leather slip sheathes. Either way this will be a small and slim carry.

Another option with this knife is to pick one up with a bail and chain. This is kind of like a wallet on a chain. It won’t walk off on you. Traditionally these bail knives were for sailors, and they continue to practical for marine applications and other times when you want to keep your knife on you.

Walk and Talk

Talking about the “lockup” on a traditional folder like this always presents a challenge, but I think it might be more applicable to talk about it’s fit and finish since those will directly relate.

The areas that are often talked about with traditionals generally are flushness of the spring and centering. I would expect a handmade custom Slipjoint to be flush in all three positions and perfectly centered, whereas I give a little grace to production knives.

The #15 is flush in the open and closed, but the spring does stick up a little at the half-stop. This would only become apparent if you stopped mid opening or closing to look at it. Centering, however, is right on the money.

Since this is a non-locking slip joint, we don’t talk about deployment and lockup. Instead we talk about “walk” and “talk”. The walk is the feel and tension of the blade moving against the spring, while the talk is the sound of the knife snapping open/closed.

The walk and talk on most GEC’s I’ve handled is pretty decent. My only gripe is that I don’t think that nail nicks are a viable method to open knives. My only interest in a nail nick is if it allows some portion of my finger to “stick” to the blade so I can pinch the knife open, and it barely functions as such on the #15. I’d love a more pinch-able blade.

GEC #15 Tidioute Boy’s Knife Review – Final Thoughts

All in all, my experiences with the GEC #15 have been very good. It’s a solid knife that performs well in the context that I think it was designed for. I think that most traditional knives perform pretty light duty tasks for everyone. Slice an apple here, open some mail there, maybe break down a few boxes as the need arises, but most of us won’t be carrying a GEC for a survival knife except perhaps as a tertiary backup to other gear. GEC’s have also maintained a good collector base, so if you’re the “Gotta Catch’em All,” type you will do well in this world.

If you are looking for a small and simple GEC slip joint, the #15 Boy’s Knife is well worth considering.

GEC #15 Boys Knife
From: BladeHQ

Editor: I recommend purchasing the GEC #15 Boys Knife at BladeHQ, KnivesShipFree, or GP Knives. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Great Eastern Cutlery #71 Bullnose Review

by Benjamin Schwartz 3 Comments

Traditional knives are like genre fiction: they’re expected to follow certain tropes. These conventions are more restrictive than those we impose when we say things like ‘tactical knife’ or ‘EDC knife,’ maybe because they’ve been cultivated over a longer period of time. However, as with a fantasy or horror novel, it’s possible for a traditional knife to transcend its label and achieve greatness, whether it’s working outside of its associated tropes or within them. When a traditional becomes great outside its tropes you get things like the Spyderco Roadie. When it achieves greatness within them, you get Great Eastern Cutlery.

Buy the GEC Bullnose at BHQ Buy the Bullnose at KniveShipFree

GEC makes traditional knives, not as they actually were back in the day, but as we fondly remember them to be (or are told to remember them). Operating out of historic Titusville, PA, GEC turns out batches of knives ritualistically grabbed up by collectors and enthusiasts eager to own these tangible remembrances of a perceived better time.

But GEC doesn’t just peddle nostalgia porn. They make truly great knives, with fantastic fit and finish, in a variety of materials both man-made and (sadly) natural. And among patterns both original and obscure, GEC also puts out classic styles, often with some slight tweaks to them. Such is the #71 Bullnose, which is GEC’s gentle revision of the Sodbuster pattern.

I picked up a Bullnose in 2017. GEC produces their knives in batches, and the latest run of Bullnoses has hit the market. Should you buy one?

General Dimensions and Blade Details

GEC’s Bullnose has a blade length of 3.1 inches, a handle length of 3.8 inches, and a weight of 2.4 oz. It is made in the United States.

This take on Sodbuster doesn’t exactly reinvent the wheel, but you get a few little perks not seen on most Sodbusters: a wider butt end, and a big lanyard hole. The Bullnose hovers pleasantly in that arena of decent-sized knives that still maintain high pocketability. It can tackle most any cutting chore and yet drops into a pocket without a second thought.

Superlative fit and finish is a hallmark of a GEC knife. These are lovingly crafted knives, pleasures simply to hold. I’ve had some very nice GECs including two different Tom’s Choice Barlows, and they’ve all been beautifully finished, but my Bullnose is the nicest of the lot. The layers are airtight, the corners chamfered, the blade centered. The swedges are somewhat uneven, but I haven’t seen any outfit get something like that consistently perfect. Basically it’s all good, no matter which way you turn it or where you look.

Presumably we get the name ‘Bullnose’ from the blade shape: a drop point, but with a squat front end, squashed in like the face of a pug. I suppose the idea is to add some meat to the tip without compromising piercing power, and it mostly succeeds in that. The Bullnose isn’t exactly a needle point but it punches through material easy enough. Another effect of the blade shape is to reduce the belly to a compressed section just below the tip, meaning that most of the working edge is a straight line. Not a bad thing, and when I needed the extra cutting muscle of a belly I angled the knife so that portion was pushing down into the material and went to town.

1095 steel is one of the traditional knife tropes. It’s a carbon steel, so you have rust to worry about – but you know that going in so I’m not going to fault it for that. Once you get a patina forming, the blade turns a smoky, cloudy gray and receives a noticeable boost in corrosion resistance. It holds an edge well if you’re cutting softish things like thread or food, but on rougher media like cardboard, edge retention isn’t going to be phenomenal.

Simply put, 1095 is mediocre. Not bad, but not great – not even merely good. GEC used to implement 440C on some of their blades and I would like to see that on the Bullnose, at least as an option for those who want it. If the Bullnose is sincerely meant as a working knife, I think the rust resistance and boosted edge retention would be worthwhile.

On a side note: I think I’m alone in this, but this is my fourth GEC and I’ve always found their 1095 exceptionally difficult to sharpen. Like, harder to get sharp than VG-10. From what I understand they run the steel a little harder than normal, and maybe this, combined with the thin edge geometry on these traditional blades, stymies my sharpening skills. But it’s definitely another black mark against the steel choice.

A Brief Digression into Warranty Stuff

You may be able to tell from my pictures, but there’s a nick in the blade of my Bullnose. Turns out that the blade was smacking against a portion of the backspring in the channel, where it rises to accommodate the pin that keeps it in place. Basically, it folded over a bit of the cutting edge.

Once I figured this out, I sent the Bullnose to GEC, and they called me when they received it with a diagnosis. They said they could fix it, but because they don’t have a dedicated warranty department the turnaround wasn’t going to be lightning quick. A few weeks later, I got it back, and it seems like they fixed it, seemingly by sharpening the blade itself down a bit – not an elegant solution. The fold wasn’t completely sharpened out, just enough to stop it from happening anymore.

All of this isn’t to hate on GEC’s warranty work. Given the nature of how they operate, the full fat warranty departments of the big production companies isn’t feasible. But just be warned that if you have an issue, the resolution of that issue is going to be a little more homespun than what you’d get with LifeSharp, for example.

Handle, Ergonomics, and Carry

The Bullnose’s handle starts with a sizable butt end that tapers into a narrow, square neck. The finger side of the handle describes a gentle arc from tail to tip, with a flattened region just below the pivot where your index finger goes in a natural grip.

That’s a lot of words to describe what, in practice, is about as simple a handle as you can get – and the simplicity works. I was worried the beak would bite into my largish hands, but there’s enough room so that it keeps my hand in place without digging into it.

GEC releases its models in a gaggle of different handle materials, so the ‘grippiness’ of your particular choice may vary from my own. I chose the natural canvas Micarta which, despite its burlapy appearance, is pretty smooth – there’s just a hint of traction, more than enough for my uses, but you can probably find grippier options in the lineup. Something that may not be clear in pictures is that the Bullnose is a thick knife: the handle is half an inch wide. Wideness doesn’t always equate to comfort, but in this case it does. All work knives should be comfortable and the Bullnose handily makes the grade.

I lavished many words on the Bullnose’s simple handle, so I’ll be more concise in describing how it carries: perfectly well. Drop it in your pocket of choice and forget about it.

Deployment and Lockup

We’re back into trope land here – nail mark, two-hand deployment; you know the drill. I don’t really get nail marks. And I don’t mean that I find them outdated. For me, they just don’t work well. Is there any knife where sliding your stubby, frangible nail into a shallow divot is easier than just pinching the blade and pulling?

Well, I guess you can deploy the Bullnose either way without undue fuss. Pull is a stiffish 7, about perfect for a knife of this size and intent. I also appreciate the half stop. We’ve all had regular folding knives come down on our fingers when we close them negligently – but imagine the blade coming down with the force of a backspring behind it. Half stops are a safety feature that makes sense to me.

The strong backspring keeps the Bullnose’s blade open with surety, too. We associate the term ‘hard use’ irrevocably with locking knives, but the Bullnose feels like it could do rigorous chores without any danger of failure, as long as it’s used sensibly.

GEC #71 Bullnose Review – Final Thoughts

The Bullnose is without a doubt my favorite GEC knife. I don’t truck with multibladed traditionals, and while GEC makes quite a few single blade patterns, the Bullnose in particular enjoys a harmonious alchemy between size, utility, and (most importantly) affordability.

It checks all the GEC boxes – old school materials, delectable fit and finish, refined traditional patterns – without any specialized characteristics and extras, and it comes out in a large enough quantity that you can get one without having to queue up in a raffle or face a hardy gouging on the secondary market. You may end up getting more GECs after the Bullnose, but I don’t think you’ll ever find a better one.

GEC #71 Bullnose
From: KnivesShipFree

Editor: I recommend purchasing the GEC 71 Bullnose at BHQ or KnivesShipFree. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Great Eastern Cutlery Tidioute 43 Oregon Trapper Review

by Aaron Shapiro 1 Comment

I’ll never forget when my family was cleaning out my late Grandfather’s house after he passed. I found an old band-aid tin that was full of a variety (in both style and age) of small multi-bladed slip joints. They were all he carried and on most of them one blade was worn down to a nub, whereas the rest were shiny and like-new. He was a true EDCer, he didn’t think about the concept of carrying things like I do, he just made sure he had what he needed. A traditional knife was always included.

Buy the GEC Oregon Trapper at KnivesShipFree or GPKnives

Slipjoints, or traditional knives, have seen a bit of a resurgence in the last couple years with the knife community at large. So much so that you see dedicated slip joint knives being made by brands like Spyderco, Benchmade, and Lionsteel.

Great Eastern Cutlery while being relatively new on the slip joint scene when compared with the likes of Queen, or Imperial, have been generating new levels of interest and collectibility with traditional knife collectors since their founding in 2009. They’ve reborn some classic brands such as Northfields and Tidioute and honor a lot of the classic production patterns that have been in pockets for decades. All that to say, today we are going to be looking at the Great Eastern Cutlery Tidioute 43 – Oregon Trapper. Now, before we get too far into this review, I want to be upfront and say that I am not a history expert on traditional knives, so please forgive some discrepancies in that regard. This review will take into consideration actually putting the knife in your pocket and carrying it in your day-to-day life. So, without further ado, some specs:

Blade Length: 3.25”
Closed Length: 4.25”
OAL: 7.5”
Steel: 1095 Carbon Steel
Weight: 3.8oz
Handle Materials: “Frontier Bone” handle scales, I think this is just a form of cow bone, but I’m not sure.

I’ve owned a handful of GEC’s knives over the last few years, even been able to get my paws on some of their much sought after Tom’s Choice (or TC by the cool kids) special factory runs. So, when I got the Oregon Trapper in hand I was struck by one thing right off the bat, this knife is large for a slip joint. I was, obviously, aware of the size when I ordered it. The specs were clearly listed on knivesshipfree.com but it wasn’t until I got the knife that I realized exactly how big it is. Now, depending on where you fall in the slip joint community that could be a good thing, or that could be a bad thing. As a tactical knife carrier in recovery, I dig the larger size. I think it’s easy to feel, “under-gunned,” for some reason when you’re carrying a small slip joint knife by itself, but this Oregon Trapper dispels that feeling.

GEC’s chosen steel is the venerable 1095 high-carbon steel. 1095 is like a bowl of vanilla ice cream when it comes to knife steels. It’s really all ya need, but there’s nothing really special here. It’s high-carbon, so it will take and hold a fine edge very well, but it will also stain and rust if you let it. To add onto that, there is also a whole “sub-culture,” that forces patinas on their blades, and I have to admit, a well-done patina (or a naturally formed one over a long period of honest use) looks really, really nice. The steel thickness on the GEC starts at 0.113” and is ground to a blistering 0.018 before the final edge. There are sharp knives, and then there are “sticky” sharp knives where when you lightly touch the edge your skin sticks to it. This knife is the latter.

Handle, Ergonomics, and Carry

As I stated earlier the handles of the GEC 43 Oregon Trapper are made from a material GEC calls it’s “Frontier Bone,” which is a vaguely frightening term that makes you think of bleached buffalo bones in a sandy Arizona desert landscape, however, the truth is less menacing. Frontier Bone is a portion of light cow bone that’s burnt or toasted, and then polished. I think it looks pretty cool and is generally cheaper and easier to find compared to something like stag or jigged bone handles.

The one catch with GEC’s (and really all traditionals) is that these type of bone handles can vary greatly in thickness. Looking straight down at my example shows that the right-hand scale is slightly concave, whereas the left is convex. So that will always be a gamble with this particular handle material, something like micarta will not have this issue. The handle shape itself is simple, straight back with a slight swell and negative angle at the tail. This allows a solid purchase in hand but doesn’t have any choils or jimps to provide texture.

It terms of carrying the GEC 43, I use a leather pocket sheath. knivesshipfree.com include their own branded buffalo leather pocket slip, that I used for a while. I have a custom pocket slip made by a friend of mine that carries a slipjoint and a Muyshondt Maus. Due to the fact that the knife is a bit larger than your normal slipjoint it may not work with all your carry methods, but it seems to work well with these. I generally suggest some sort of pocket organizer to keep the knife vertical in your pocket, there’s nothing worse than knife sitting sideways in your pocket.

Walk and Talk

Lastly, the action. Slipjoints are measured on a scale of 1-10. 1 being the blade having zero resistance on it from the spring, and 10 being it needs the screaming He-Man strength to open it. Most GEC’s are a 6-7, they have a stronger pull than I like, but are usable and manageable. The Oregon Trapper clocks in at a solid 5, nice and smooth action with a pinch-able blade. I found the walk and talk to be a little spongey, but there is still a good positive half-stop and audible snap when closing/opening. Once opened the knife is solid and doesn’t have any movement side to side. For a production, this is perfectly acceptable.

Great Eastern Cutlery Tidioute 43 Oregon Trapper Review – Final Thoughts

So, would I suggest this to someone else? Sure, if what you want is a larger slip joint that could serve as your only EDC knife. I think the decision to transition from a locking folder to a slip joint as part of your EDC is one that takes some consideration. I would personally say that non-locking folder of any sort is more of a lighter-duty knife. So if you’re in law enforcement, construction, fire fighting, etc – I think that you’d need to think long and hard about what the lack of a lock would mean on your knife.

If you’re like me and you work in an office, and primarily open mail, packages, and cut food with your EDC knife, this is an obvious choice; and a great way to introduce some variety into your EDC rotation. As always our preferred source of everything sharp is either from knivesshipfree.com or bladehq.com both of which have this particular Great Eastern Cutlery 43 Oregon Trapper in stock.

GEC #73 Oregon Trapper
From: KnivesShipFree

Editor: I recommend purchasing the GEC 43 Oregon Trapper at KniveShipFree or GPKnives. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Schrade Frontier SCHF52 Review

by Josh Wussow Leave a Comment

Sometimes, you just need a big, dumb knife. Thus was the rationale behind my purchase of the Schrade Frontier SCHF52, a tool designed “with extreme wilderness survival situations in mind.” While I don’t consider myself an extreme sort of guy, I do certainly enjoy both the wilderness and the thought of surviving.

Buy the Schrade SCHF52 at BladeHQ

Buy on Amazon

I tested this full-tang terror over a few blustery days in New Mexico, tackling fallen trees and dry timber on the banks of the San Juan River. It was, like many of the best things in life, a truly surprising experience. Let’s dive in.

General Dimensions and Blade Details

As always, we begin with some stats. This is one of the larger offerings in Schrade’s Frontier line, with a reach of 13-inches overall. Seven of these make up the coated blade, with 6.25-inches worth of sharpened surface. The handle adds another five, with the downward sweep of the pommel rounding out its foot-plus length. As expected on a survival-minded knife, the blade stock is wide across the shoulders – 0.23-inches, to be exact. The grip is fairly substantial, with 0.83-inches of girth where the rubber meets the palm. All told, your $30-$36 buys just over a pound of drop-point, hollow ground 1095 steel. That’s a heck of a lot of tool for not a lot of money.

Here’s something you’ll hear echoed a few times throughout this review: I did not expect the SCHF52 to slice worth a damn. I figured chopping, cleaving, and other brute force tasks would be the Frontier’s forte. But the first time I swiped its edge across a branch, I was shocked to see a long, thick strip of wood go flying through the air. The hollow grind bit deep beneath the bark, leaving a flattened swath of wood in its wake. I did this over and over until I’d completely stripped a foot-long stick. Then I picked up another and did it again.

Once this initial delight wore off, I set to testing the tasks for which the Frontier was ostensibly designed. As expected, its substantial weight and durable steel make it an excellent chopper. The heft of the blade and security of its rubber grip allows you to generate impressive force on the swing, and the edge bites hard into fallen timber. The hollow grind also proved to be surprisingly durable. After bashing through a log or two, I was still able to generate some pretty fine wood shavings.

Next up was every internet troll’s favorite use for an outdoor blade – Batoning. While I generally avoid this with smaller blades, the SCHF52 is built for these sorts of tasks. So, driving it through a three-foot length of dead timber should be no problem, right?

Right.

So, what can’t the 52 do? Well, it’s not going to be the greatest asset when it comes to food prep. The hollow grind will do better than others, but the overall thickness isn’t terribly helpful at the cutting board. And, as you can see, the blade coating will rub off when driven through slabs of wood. But overall, the performance of this sub-$40 knife blew me away. I expected it to be good, but not this good.

Handle and Ergonomics

The overall ergos on the SCHF52 are excellent. The texturing on its rubber cladding locks into the palm, inspiring confidence through a variety of uses. The pistol-grip style forward finger choil is excellent for delicate maneuvering, and the downward curve of the pommel fits well against the heel of my hand. You can even use this area for increased chopping leverage, wrapping your ring and middle fingers against its gentle hook. This allows for a bit more force on the swing, though the impact can be rough on gloveless hands.

Speaking of rough, the lone sore spot here is the jimping just aft of the upper blade guard. It works fine during light carving work, but it bites at the webbing of my thumb during heavy use. It’s not the end of the world, but I’d recommend wearing gloves for impact tasks.

In addition to my rubber model, Schrade offers the Frontier 52 in Micarta, as well. Personally, I think the slightly spongy texture of the rubber is better suited to impact tasks, while being more attractive to my particular eye.

Sheath

Sheaths tend to be the weakest point on most budget fixed blades. Happily, I found Schrade’s sheath to be markedly better than expected. The nylon strap and body hold the knife securely, with a surprisingly comfortable ride for such a hefty blade. The knife slides in and out effortlessly, once you find the narrow slot in the integrated plastic sleeve. This takes a bit of attention, so be careful until you’ve developed a feel for it.

The biggest weakness I see here comes from the belt loop. It’s secured by what amounts to two pieces of folded over Velcro, pressed together around the pass-through. I think anyone who’s ever had a long-term pack, pouch, or pair of shoes with this sort of closure can see where this is going. Eventually, those sticky surfaces attract dust, fabric, and all sorts of material to their tiny claws. This limits the lifespan of the material, especially on what I consider to be a hard-use tool. If you’re looking to the Frontier as long-term companion, you may want to fuse these strips together somehow.

Other than this one issue, however, the sheath appears to be up to snuff. Even the little leg-loop at the bottom works well despite, as my wife and her friend put it, looking “really silly.” They’re right – Walking around with a boot lace tied around your thigh does look kinda dumb. But in the wild (or your own back yard) who really cares?

Let’s quickly touch on the included ferro rod and sharpening stone. In truth, I expected both of these add-ons to be junk. And while I was half right (the included striker steel is garbage), I was able to make fire using the ferro rod and the back of the blade. The spark output isn’t massive, but it was enough to catch the dry tinder I pulled from the side of a fallen tree. The rod is pretty thin, though, so don’t expect it to last for more than a handful of trips.

As to the sharpening stone, I haven’t had occasion to test it. The 1095 held its edge quite well, and a quick visit to the strop set it back to hair-shaving sharp. While it may not generate the polished edge of a bench stone, I have no doubt it’ll be serviceable in the field.

Schrade SCHF52 Review – Final Thoughts

This is a knife I expected to like from the get-go. It wasn’t, however, one I expected to love. But from the first slice across its very first twig, I really fell for this blade. It’s a simple, straightforward, and eminently capable design, backed with materials that walk the line between durability and disposability like no tool I’ve ever tested.

What I mean is this – I’m confident that the 1095 can hammer through a log. But, should it fail, I also know that I’m only out $30. This sort of confidence is very liberating, allowing you to focus on the fun of your outdoor adventures without babying the blade. I even brought along my Steel Will R300 Roamer for comparison, a D2-bladed knife costing twice as much. And you know what? I think I actually prefer the Schrade.

Overall, the SCHF52 gets an unqualified recommendation from me. It plays the part of the big, dumb knife to perfection, while packing just enough smarts to keep things interesting. At this price point (or even twice that), you’d be hard pressed to do any better.

Schrade Delta Class Bedrock High Carbon Steel Fixed Blade Knife with 7in Drop Point Blade for Buschcraft

DIMENSIONS:Blade Length 6” - Handle Length 7” - Overall Length 13” - Weight 23.4 oz
MATERIALS: AUS-8 steel drop point style blade
SECURE: Overmold handle for confidence in your grip
BE PREPARED: Injection molded sheath for convenient carry
WARRANTY: This knife includes a limited lifetime warranty. If you have questions or concerns please contact Schrade Customer Service

Editor: I recommend purchasing the Schrade SCHF52 at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.