Recommended Survival Knives

ESEE Junglas Review

Last Updated: July 21, 2021

Unlike a tattoo, a blog post is easy to edit. Easy to update. And that’s a great thing because I originally penned this review of the ESEE Junglas back in May of 2011. Currently it’s 2021. I’ve owned the knife for over 10 years now. That’s hard to believe. Time to update the review.

Buy the Junglas at BladeHQ
Buy on Amazon

Spoiler alert: Not much has changed. I loved the Junglas in 2011, and in 2018 I still love the knife. Only now I’ve beaten the hell out of mine for half a decade, so I can comment on all the experience I have with the Junglas. I’ve also added some new photography of the knife in it’s present condition. The handle has darkened with sweat and grime, and the coating of the blade shows considerable wear, but in my opinion this just adds character to a bad ass knife.

The Junglas remains my favorite big chopper. It’s the knife I reach for after a hurricane. Heck, it’s the knife I reach for as I get ready for a hurricane, as well as a knife I have used to break down countless branches, baton open logs for camp fires, and relieve a hell of a lot of stress.

General Dimensions and Blade Details

The ESEE Junglas has an overall length of 16.5″, a 10.5″ blade, and it weighs 22.5 ounces on its own, 33 ounces with the sheath. It’s a big knife. I can’t say I’ve brought it on any ultra light hiking trips. It mostly lives in my garage. But that size and weight make it a tremendous chopper, and it’s a very satisfying tool to heft and use. Although it shares some lines with a machete, it’s much stouter. Shorter and thicker stock. It’s more like a short sword. I like the dimensions and wouldn’t change a thing. If you need something smaller ESEE knives has an entire range of products for your consideration. This one is their big gun.

The blade is a long drop point made of a 3/16″ thick piece of 1095 high carbon steel. It does two things well: chopping and batoning. I have chopped a ton of tree limbs with this knife. My chopping technique isn’t the best, but if I’m concentrating I can get through a fresh 2″ thick limb in 3 swipes.

The knife comes with almost a full flat grind, so it’s not the most amazing knife to baton with (I prefer the Fallkniven A1), but what it lacks in geometry it makes up for with size. You can span large logs with this knife and beat the Junglas through pretty much anything. Mine has held up famously, although the powder coating is worse for the wear. I am glad it has worn down a bit, as it means less resistance when I am chopping.

The Junglas comes in 1095 high carbon steel. I am a big fan of 1095 for a big chopper like this. 1095 is tough, so it doesn’t chip easily, and it is easy to sharpen. It’s an excellent steel for chopping wood. Of course, being a high carbon steel it is more susceptible to rust than a stainless steel. ESEE mitigated this somewhat by applying a black powder coat. This coating wears well when compared to a cheaper teflon coating, but it will still wear. Regardless, the coating will help protect most of the knife from rusting. That said, you are going to want to keep this knife dry and oiled. I try to hose my knife down with WD-40 after every session. I have not had any major issues with rust following this protocol.

Handle and Ergonomics

The handle of the Junglas is simple, but it’s done right. The scales are 2 large slabs of canvas micarta, which provide good grip and durability. This knife is nicely finished. The edges of the handles are radiused (smoothed), and they line up flush with the tang. The micarta is held in place with 3 large allen bolts, so you can take this knife apart if need be. Extra steel protrudes from the pommel, and you can use that to crack nuts or the skull of a zombie invader.

The ergonomics of the Junglas are excellent. This is a knife I have chopped for hours and hours with. I’ve never had a problem with hot spots or discomfort. The handle fills the hand well, and the shape of the handle helps to hold your hand in place. The combination of the smart design and high traction micarta keeps the Junglas in your hand, even if you are a sweaty bastard like me, and near delerium from an afternoon of chopping in the 95 degree Florida heat. The ergonomics are outstanding and I can’t overemphasize that. It’s critically important for a big chopper like this, and the Junglas nails it.

Sheath

The sheath is often the weakest link from a production fixed blade. Most manufacturers spend their money on the knife itself, and the sheath sometimes feels like an afterthought. Thankfully this is a non-issue here because ESEE made a sheath as good as the knife, if not better.

The sheath is made of a combination of kydex and cordura. The kydex portion runs the length of the blade up past the hilt. The cordura portion is the fabric part that attaches to your belt and is removable with 4 fasteners.

My favorite part of the sheath is the sound it makes. The knife slams into the sheath with a loud “crack” that reminds me of a 12 gauge racking a round. It’s a sound that means business. Maybe it’s the 12 year old boy in me or something, but it find it immensely satisfying. If you don’t care for the sound, you can adjust the retention so it’s a little quieter.

Regardless, once locked in place this knife isn’t going anywhere. The secondary retention strap is there for a little extra security, and if you were going to jump out of an airplane with this knife, there is a way to physically lash the blade into the sheath. My friends, blade retention is not an issue.

And the sheath comes with all the bits and bobs you would expect here. There is a water drain, tons of eyelets for running paracord, and it’s MOLLE capable. And everything is built to the highest standards. My sheath shows very little wear. I appreciate how the secondary retention strap falls away, so you don’t cut into it while drawing out the knife. I’ve inadvertently sawn through the retention straps of other sheathes before. You don’t have that problem with this sheath. In fact, you don’t have any problems with this sheath.

In conclusion, this sheath rocks. ESEE thought of it all and you have a sheath that wears just as well as the knife.

As a parting size comparison shot, here is a shot of the Junglas next to an ESEE-3:

ESEE Junglas Review – Final Thoughts

There is a reason I keep coming back to this knife. The Junglas is a beast of a knife. My collection has ebbed and flowed over the years, but the Junglas remains a constant piece of gear. At around $175 this is not a cheap knife, but when you consider what a quality folding knife goes for this is an easy one for me to justify. If I lost it today I’d buy another one tomorrow. No questions asked.

And I think you get what you pay for. Nothing else comes close. The Becker BK-9 is about $100 less and is a great tool for the money, but the Junglas is the knife I continue to reach for. After owning this blade for over 5 years this is the highest endorsement I an offer.

Even if you are just a mild-mannered suburban guy like me, if you do your own yard work or enjoy the occasional campfire you will get a thrill out of owning and using this excellent knife.

ESEE Authentic JUNGLAS-E Survival Knife, Kydex Sheath, MOLLE Backing

ESEE Tactical Suvival Knives.
Kydex Sheath w/ Cordura Backing.
Steel: 1095 Carbon, 55-57 Rc. Finish: Black Powder Coat.
Hammer Pommel w/ Lanyard Hole. Flat Grind.
For Full Specifications, Features, Survival Kit Contents, Care, and Warranty Info Please See Description Below.

I recommend purchasing the Junglas at BladeHQ or Amazon. Purchasing anything through any of the links on this site helps support BladeReviews, and keeps this review train running. As always, any and all support is greatly appreciated Thank you very much.

ESEE Izula II Review

by Dan Jackson 10 Comments

Last Updated: September 22, 2018

The ESEE Izula is one of the most iconic small fixed blade knives of our time. Named after an infamous South American Ant, the Izula was designed to be a small, sharp, and incredibly tough blade for outdoor and everyday use. In practice, the knife is just that. The simple design and solid build catapulted the Izula into fixed blade fame in very short order. More recently ESEE released the Izula II, a version of the knife with a slightly longer handle. Having larger hands I went with the Izula II, but 95% of this review applies just as well to the original Izula.

Buy the ESEE Izula II at BladeHQ

Buy on Amazon

As for the intended use (and my overall perspective of this knife for purposes of the review) I have carried my Izula II extensively as both a suburban EDC and as an outdoor knife. The Izula is a great size for the pocket and is something I have no issue pairing with a larger fixed blade, a folder, or just carrying it by itself.

General Dimensions and Blade Specifics

The main differences between the Izula and Izula II are the handle length, weight, the color selection, and the fact that the Izula II comes standard with micarta handle scales while the scales are optional with the original Izula. The handle of the Izula II is exactly half an inch longer than the Izula, giving the knives a total length of 6.75″ and 6.25″ respectively. Both have a blade length of 2.75″. The Izula II has a weight of 3.2 ounces and the Izula has a weight of 2.0 ounces. Both knives are made in the USA.

Both knives are forged from a single piece of 1095 High Carbon steel (the same steel used in all ESEE knives). 1095 is a very tough tool steel that is great for outdoor and survival knives because it is very tough (less likely to chip or break), sharpens easily, and takes a very nice edge. The biggest disadvantage to 1095 is that it is not a stainless steel and will rust if you aren’t careful. In order to help combat rust ESEE coats the knives in a textured powder coat. 1095 is a proven steel that I have written at length about, and Rowen (the manufacturer for ESEE) knows how to heat treat this steel (to 57 HRC).

The Izula and Izula II share the same drop point blade shape. This is a great shape for all around utility, with plenty of belly, a stout tip, and a full flat grind. What impresses me the most is how thick the blade is at .156″ (~4mm). The thick steel holds up well to batoning, tip torture tests, and everything else I could throw at it. “Indestructible” is a word that readily comes to mind when I ponder the Izula II’s blade. Of course the thick geometry means that this won’t be your best slicer – it’s no chef’s knife for sure. But the Izula does a good job cutting and will make quick work of most EDC tasks, camp chores, basic food prep, and carving.

Handle and Ergonomics

The regular Izula comes “naked” without any kind of handle material. The skeletonized 1095 is perfect for wrapping paracord around it, or you may opt for the canvas micarta handle scales ESEE sells separately (they can be had for around $15). The scales beef up the knife a bit and it provides a great feel to the knife. Even without any kind of handle scales the Izula is a reasonably comfortable knife. A paracord wrap is an attractive and inexpensive option that will add additional comfort to the handle and also allow you to carry a couple extra feet of cord on you with the knife.

The Izula II comes with canvas micarta scales that feel good and wear well. They are attached to the handle with two sets of allen bolts – making them fully removable. Having used the knife hard in the outdoors I do wish the bolts were flathead bolts. That would make them much easier to service with something like a multi-tool, coin, or even the spine of another knife. That is probably my biggest complaint with the Izula II, and I generally feel they did a great job with this handle. The micarta is lightly textured, and it provides a good comfortable grip in wet or dry conditions. One thing about canvas micarta is that it will soak up sweat, oils and moisture and it will darken over time. I happen to think this looks cool and adds a little character to the knife.

As for overall ergonomics, you will want the Izula II if you have larger hands. I take a large glove and the Izula II fits me perfectly. In my opinion anything less would feel cramped. I also really like having micarta scales on this knife, it fills the hand well and makes for an extremely comfortable tool. Both knives have a nice spot for your index finger and functional jimping on the thumb ramp. It gives you good control over the knife and feels very natural. If you are the kind of person with smaller hands, in need of a neck knife, or want to take a crack at making your own handle scales then the original Izula might be a better choice.

Sheath

Both knives come with black injection molded plastic sheathes. These are lightweight sheathes made of a dense polymer that is very durable. Blade retention with these sheathes is excellent – the knife locks into the sheath with a very satisfying audible “snap.” The fit is nice and tight (no rattle), but it is not impossible to pop the knife out with your thumb. This is about perfect in my book because the knife is secure but it is also easy to get at when you need it.

The sheath on the Izula (and Izula II) allows for multiple mounting options. The sheath has 2 smaller eyelets for paracord, a slot for belts or webbing, and a large eyelet near the tip of the sheath for a lanyard. My favorite way to carry this knife is in my pocket. I’ll sometimes loop a largish (18″ or so) lanyard through the large eyelet of the sheath and secure the other end to my belt. It makes retrieval of the knife easier and you don’t have to worry about misplacing your sheath.

All in all I am extremely pleased with the versatile and durable sheath that comes with the Izula / Izula II. This is easily one of my favorite small fixed blade sheaths.

ESEE Izula II Review – Final Thoughts

The Izula II is a great little knife. The simple design and sturdy construction make for a very versatile tool that works just as well around the house as it does out on the trail. If you need a small no-nonsense utility knife then I would say to look no further. The sheath is excellent, the handle is comfortable, and the 4mm blade stock holds up to even the toughest tasks.

The Izula goes for around $55 for the knife and the sheath ($16 more for handle scales) while the Izula II can be had for around $65. I’d say these are fair prices. Remember that these knives are made in America and that ESEE has a no questions asked lifetime warranty so if anything happens to the knife (besides rust) ESEE will replace it. Some will argue these knives are expensive. I think in this case you get what you pay for.

Finally, if I could go back in time and pick between the Izula and Izula II again I would stick with my Izula II. I like the standard micarta handle scales, and greatly appreciate the slightly larger handle of the Izula II. That said, if you are looking to make your own handle scales, have smaller hands, or want to keep the weight down then the regular Izula is probably your best option.

ESEE Knives Izula-II Fixed Blade Knife, Micarta Handle, Molded Sheath, Clip Plate (Black)

Overall Length: 6.75″
Blade Length: 2.63″
Steel: 1095 High Carbon, 55-57 Rc.
Weight: 3.2 Oz. w/o Sheath
Molded Sheath & Clip Plate

I recommend purchasing the Izula II at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

ESEE-3 Review

by Dan Jackson 22 Comments

Last Updated: July 14, 2019
ESEE Knives specializes in outdoor fixed blade knives designed to take a beating and perform in a number of environments. Something special about ESEE knives is their no questions asked warranty that covers everything but rust. If anything happens to your knife through use or misuse, ESEE will replace it – no questions asked. This is great for a hard use tool because these knives aren’t cheap.

Buy the ESEE-3 at BladeHQ

Buy on Amazon

The ESEE-3 is one of ESEE’s smaller knives designed for anything from general field and utility work, to use as a full on survival knife or bug out bag blade. These knives (like all of ESEE’s offerings) have been proven in their jungle survival training courses. If you are looking for a smaller survival knife, or simply want to add a versatile fixed blade to your system, the ESEE-3 could be an excellent choice.

General Dimensions and Blade Details

The ESEE-3 has a total length of 8.31″, a 3.88″ blade and a weight of 5.2 ounces without the sheath (9.3 ounces with the sheath). This is a great all purpose size and a lightweight carry for such a strong knife. Could see the ESEE-3 doing great in a variety of scenarios, from a day hike to life on a ranch.

The ESEE-3 is of full tang construction and comes powder coated in black or desert tan. This makes the knife both strong and durable. The blade is a drop point shape and features a full flat grind, excellent for slicing, and batoning. The point is reinforced on which is almost critical for use as a survival blade but it also serves well in defensive scenarios. I looked at the plain edge version although ESEE offers this knife in a combo edge as well.

The ESEE-3 is made of 1095 high carbon steel. 1095 is a durable tool steel that is very good choice for survival knives because it is easy to sharpen, holds a good edge, and doesn’t chip under hard use. It’s a high carbon steel, not a stainless steel, so one issue with 1095 is that it will rust if you aren’t careful. You must oil this knife. Something as simple as WD-40 will be adequate although some prefer specialized knife and gun oils.

Handle and Ergonomics

The handle scales on the ESEE-3 are made of micarta. They are fixed onto the tang with 3 allen bolts. The handle scales are nicely milled and rounded. They provide good grip and the knife feels good in the hand with no noticible “hot spots” after use. The level of fit and finish on ESEE knives is very high, and one way to confirm that is by examining how the handle and the tang meet together. Examining the handle and tang on the ESEE-3 reveals that everything is flush with no edges or gaps. This is a nod to the high quality control and production values ESEE adheres to. The overall length of the handle is very adequate, even for larger hands. For a knife that is meant to be used, a large and comfortable handle is very important and ESEE did a great job with the handle on the ESEE-3.

The pommel (butt) of the ESEE-3 is pointed and can be used as a glass-breaker. This is a cool little addition that I may never need but like to have. Naturally, it’s good for breaking glass but it is also as a potentially non lethal way to use the knife (although I think there is still great potential to seriously injure someone with it – be careful). There is also a lanyard hole drilled into the pommel which is essential for heavy chopping and other hard use tasks.

Sheath

The sheath on the ESEE-3 is also very well done. The standard sheath is made of molded kydex and has a boot clip. An optional MOLLE adapter is made of cordura and provides the option to mount the sheath with a MOLLE system. When you secure the knife in the sheath there is a nice snap as it fits together. There is a retention strap and a elastic cover which is used if you want to mount the sheath for upside down carry. There is a small drain hole at the base of the sheath which helps keep your blade dry (especially important with that 1095 steel).

ESEE-3 Review – Final Thoughts

The ESEE-3 is a very heavy duty and high quality fixed blade knife. If you are looking for something on the smaller side, I think the “3” combines a light weight with a lot of utility. That blade has a lot of belly and the full flat grind is always nice. I could see the ESEE-3 performing well as an EDC knife (if you can swing carrying a fixed blade), a tactical knife, a camp knife, a hunting knife or as part of your gear for bushcraft and wilderness survival.

I love how the ESEE-3 has been built in the USA to very high tolerances and is backed by one of the best warranties in the industry. I’m not sure I can say this knife is an outstanding bargain, but you will definitely get what you pay for. As long as you don’t lose the knife, or leave it in a bucket of salt water, the RC-3 will serve you well for the rest of your life.

ESEE Knives ESEE-3MIL-P Military Plain Black Edge / w Green Canvas Micarta Handles

Overall Length: 8.31", Blade Length: 3.875"
Blade Material: 1095 Carbon Steel
Handle Material: Canvas Micarta
Sheath: Olive Drab Molded Polymer
Made in USA

I recommend purchasing the ESEE-3 at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Schrade SCHF9 Extreme Survival Knife

by Dan Jackson 12 Comments

Last Updated: July 31, 2019
I’ve always been into big survival knives. I especially like a large, “do it all,” survival knife because it can substitute the need to carry an axe and a smaller knife. One such knife that has been getting a lot of attention lately is the SCHF9 Extreme Survival Knife. I really liked the design of this knife so I knew I had to get one in for a review. Below are my impressions of the knife.

Buy the Schrade SCHF9 Extreme Survival Knife at BladeHQ

Buy on Amazon

General Dimensions and Blade Details

This is a medium-large knife with an overall length of 12″, a blade length of 6.4″ and a weight of 15.9 ounces. There are three features that I find especially important with the blade. SCHF9 has a blunted tip, a deep full flat grind and a plain edge.

I prefer a blunted tip over a pointed one with a survival knife because it makes for a much stronger tip that is less likely to break. Tip strength is very important when you don’t have the luxury of a garage full of tools. Despite having a blunter tip than say, the Schrade SCHF1, the knife can still be very effective as a defensive or tactical tool and will perform thrust cuts well. I find my main use with a large survival knife is chopping and slicing, not stabbing – therefore a strong tip is important to me.

The full flat grind is also a very important blade characteristic that I like to see in a large survival knife. The full flat grind (vs. a saber or hollow grind) makes for a much tougher edge. Not only does this avoid blade chipping but it is excellent for chopping. The steel on the SCHF9 is a good 6mm thick at its widest point and the blade comes with a deep full flat grind. The thick steel and deep full flat makes the knife very hatchet like. This knife excels at splitting wood and other chopping and slicing tasks.

A final blade characteristic that I really like about the Schrade SCHF9 is that it’s a plain edge. Specifically, I’m happy it’s not a partially serrated knife. Serrations have their place and I own several serrated knives, however, I feel that for a survival knife combo edges have disadvantages. Partially serrated blades are A) difficult to sharpen (especially in the field) and B) provide neither the advantage of a full serrated knife nor the advantage of a full plain edge. What you get is a poor compromise. The last thing you need in the woods is a tool that can “kinda” work. You want a couple quality tools that will get you home safe. A big plain edge lets you use the full leverage of the knife for chopping tasks and allows you to to also work in close with the edge for detail tasks. I carry a lightweight pocket chainsaw for when I require serrations.

The combination of the blunt tip, deep full flat grind and plain edge is an absolute winner. I think it’s an ideal combination for a large survival knife, especially paired with a pocket chain or wire saw.

Blade Steel

The SCHF9 is made from a single solid piece of 1095 High Carbon steel. 1095 is a very popular knife and tool steel and is an excellent choice for a survival blade. A high carbon steel is generally harder and will hold an edge longer than a stainless steel. This is very important if you do find yourself in a survival situation. The 1095 will take a beating and hold it’s edge very well. However, because it is a high carbon steel (instead of a stainless) it will be more prone to rust. Keep in mind that all knives, even stainless steel knives, can and will rust without proper maintenance. Rust is easily avoided by keeping the blade dry, storing it outside of the sheath, and oiling occasionally (I like gun oil but WD-40 works in a pinch). Schrade also applied a tough teflon coat to the blade to help minimize the chance of rust.

Handle

A lot of attention went into designing the handle of the SCHF9. Schrade selected Kraton scales for the handle material. Kraton is a hard rubber that provides excellent grip, wet or dry. The handle is lightly textured and my experiences with the knife have found it to be very grippy.

The ergonomics of the SCHF9 were well thought out. The handle on the SCHF9 has 3 finger choils and a large palm swell making the handle very easy to hold with or without gloves. Additionally, the combination of the handle shape and tough rubber scales make this a very comfortable knife to use. I find that the Kraton absorbs a lot of the shock when chopping hard wood. Speaking of chopping, the blade’s weight and balance make it ideal for chopping and splitting while the well-designed handle keeps the knife in your hand.

The finger choils on the handle and the the un-sharpened portion of the blade give you a variety of gripping options. I’ve found that this larger knife will allow for detail work of a smaller knife (a such as making feather sticks to start a fire) because of the great handle design.

Sheath

The sheath on the SCHF9 is very good for such a large and inexpensive survival knife. Now a bad sheath can sometimes be a deal-breaker for me so I understand the importance of a good sheath. Fortunately, the SCHF9’s cordura sheath is well made and has a heavy duty plastic insert with an adjustable retention strap for right or left hand carry.

The sheath has the option of attaching with a strong snap on strap or a more permanent threaded belt loop. Velcro and eyelets for para-cord provide additional mounting choices. So what this means is that you can strap this sheath to your belt, leg, vest, pack, whatever you want. I like options in a sheath, and this one has plenty. Here is a shot of the back side of the sheath:

The sheath also has a large pocket on the outside for extra storage. What I like about this particular pocket is that it is removable – so, if you only want to carry the knife, you can. Additionally, the pocket has a belt loop so it can be strapped to you or your gear separately from the sheath. It’s not a bad little system and depending on what I am doing that day, I will sometimes use the pocket. For a relatively simple cordura sheath, Schrade has really put the time and effort into making the most of it.

Final Thoughts

For a “do it all” survival knife this blade really impressed me. You can tell a lot of thought went into getting the most out of a single tool. I can see this knife replacing a secondary small knife and a hatchet in those instances where you want to travel light. If you combine this with a survival saw and a fire steel you can accomplish most common survival tasks.

Schrade Delta Class Reckon Tini Fixed Blade with 1095 High Carbon Steel Blade, 6.4in Fixed Blade for Buschcrafting, EDC

DIMENSIONS: Blade length: 6.4in (16.3cm), overall length: 12.1in (30.7cm), weight: 15.7oz
DURABLE: Constructed out of durable 1095 Steel
SECURE: Have confidence that the blade will not slip with the security of the finger choil
BE PREPARED: Knife features a leather lanyard for added security when in use
Includes: Knife, sheath, and lanyard

I recommend purchasing the SCHF-9 at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.