Recommended EDC Knives

Case Sod Buster Jr Review

Last Updated: July 20, 2019

I recently reviewed the Victorinox Cadet. This is a time honored knife, but frankly I was unsure whether many people would be interested in reading a review on it. The feedback was actually really good. So much so that it has encouraged me to write a review on another classic slip joint in my collection, the Case Sod Buster Jr.

Buy the Sodbuster Jr. at BladeHQ

Buy on Amazon

I got into the Sod Buster Jr after realizing how much I enjoyed carrying the Cadet, and wanted to venture further into the world of traditional slip joint knives. I’ve been into modern EDC and Tactical knives for 5 years now, but really know very little about traditional slip joints. So when I knew that I wanted to try another slip joint out it wasn’t long before I stumbled across the Sod Buster Jr. Three things really drew me to this knife: 1. It’s made in the USA 2. It’s under $25 and 3. it features a nice carbon steel blade (although you can get the knife in stainless steel if you want). Throw in the fact that it’s made by Case, a company that I know has a serious pedigree in the world of traditional American knives, and I figured it was a great starting point.

I have to say though, I’m not much of a historian. If you are looking for a definitive history of the sod buster pattern then this won’t be the place for it. My understanding is that the pattern or style of knife is anywhere from 100-130 years old, and emerged from Germany as a kind of a folding butcher’s knife or a clasp knife. It can be loosely classified as a type of peasant or farmer’s knife. Case apparently associated the name “sodbuster” with their knife design in the 1960s. If any historians want to correct me or drop some knowledge in the comments section, by all means be my guest. I’ll be approaching the knife purely from a utilitarian/general knife enthusiast’s standpoint.

General Dimensions and Blade Details

The Sod Buster Jr has an overall length of 6.45″, sports a 2.8″ blade, and weighs 2.19 ounces. For a mild mannered suburbanite these are great numbers. Much like my trusty Cadet, I can easily slip this knife into a pair of slacks and not miss a beat. Of course if you are looking for something a little larger, Case does offer the full size Sod Buster, and it could easily be carried as well.

The blade is a classic drop point design with a short belly and tough tip. The knife was designed to be used as a utility blade, and it certainly functions that way in the 21st century. The grind is a full flat grind, or something close to it, and it gets nice and thin behind the edge. It is a tool knife and it cuts quite well.

Case actually offers the knife with 2 distinct steel choices. You have their “TrueSharp Surgical Stainless Steel” and their Chrome Vandium (CV) high carbon steel. I opted for the high carbon steel version as the thought of a pocket knife with a carbon steel blade was intriguing (and, believe it or not, is actually a first for this website), and what little preliminary research I did do before buying the knife suggested that the CV steel superior to the TrueSharp stainles steel in the arenas of sharpening and edge retention. Whether that is true in practice is impossible for me to say at this point, but I did notice a good deal of info floating about the web comparing CV to TrueSharp, if that sort of question tickles your fancy.

In practice the CV steel exhibited a lot of the qualities I like about carbon steel. It was easy to sharpen and it held a decent edge. It’s not a super steel in the edge retention department, but for my purposes it got the job done.

I will say that the CV steel does patina (and will rust if you aren’t careful). The knife arrives from Case with something of a mirror polish to it. My blade started to get some color after cutting up an apple, and I actually noticed a couple little spots of rust forming on my knife when I left it in a drawer for a few weeks (without oiling it first). At that point it wasn’t the nicest knife to photograph so I tried my hand at forcing a patina with some mustard. My results were interesting. The knife definitely darkened and I think it looks pretty cool. It would be even nicer to “earn” that patina over decades of use, but I guess there is still plenty of time for that.

At the end of the day for a $20 slip joint the performance of the blade and steel definitely surpassed my expectations. This is a nice little cutter and you will have a hard time finding much else that will exceed it’s performance given the price tag.

Handle and Ergonomics

My Sod Buster Jr came with yellow synthetic handles. They offer the knife with black plastic handles, but there is a bunch of writing on the blade, and that didn’t appeal to me. The synthetic yellow material is actually quite dense and has a quality feel to it. The yellow has some old school charm to it, almost as if it were made of bone or ivory, and I enjoy that aspect of it. The handle is of pinned construction with brass pins and pivot and brass liners. The backspacer / spring is stainless steel.

Ergonomically, the chunky yellow scales fill the hand nicely and there is just enough room for a 4 finger grip (with large hands). There is no jimping or texturing anywhere on the knife. I wouldn’t call the handle slick, but it’s not a traction machine either. I was able to comfortably accomplish normal EDC tasks including opening my mail, cutting up fruit, and breaking down boxes. If I had a rocking chair I could easily spend an afternoon whittling on the porch with a corn cob pipe and a fat slug of whiskey.

While we are discussing the handle, it’s worth noting that the handle is pretty thick. For example, it is way thicker than my Alox Cadet:

This also isn’t a bad time to point out that the blade centering on this $25 knife is dead nuts center.

Deployment and Lock Up

For your “deployment” you have a nail nick, and the knife doesn’t have a lock, so this section once again proves to be a little off point. The action or, “walk and talk” as slip joint aficionados call it, seems pretty good. I don’t have enough slip joints to form a frame of comparison, so I won’t attempt to rank it on a 10 point scale (slip joint enthusiasts sometimes rank the pull or strength of the spring on a 1-10 scale). I will say that this knife sure as heck isn’t opening up by accident, and the blade makes a satisfying snap when it pops open. There is no half stop on this knife.

The lock up is pretty good considering that there is no lock. I didn’t have any issues with the knife closing on my hand, but I was careful in using it. If you mind your p’s and q’s and use the right tool for the job then you should be able to get a fair amount of work done with this knife.

Case Sod Buster Jr. Review – Final Thoughts

I am frankly very impressed that they can still make these in the US and sell them for under $25. Little details like a centered blade a sharp even edge bevel are present at a price point where these kinds of details often cant be found. Case in point, I bought a little plastic handled Buck lockback knife a couple years ago, and the thing was such a piece of junk that I didn’t even bother reviewing it. The Sod Buster Jr is legitimately a nice knife. Much like the Cadet, this would also make a great gift knife.

What else can I say? The Case Sod Buster Jr is an absolute classic. There are folks who have dedicated their collections to traditional slip joint knives, and could lend far keener insights than I have. So I hope I didn’t do it too grave of an injustice with this review. I still wanted to take an opportunity to talk about it, because I can appreciate the knife even as a relative outsider to the world of traditional folders. It’s a nice gateway knife, and a safe starting point for a traditional collection. I like and recommend it.

Case Sod Buster Pocket Knives, Yellow, Small

Chrome vanadium (CV) steel blade
Skinner blade; smooth yellow synthetic handle
Great everyday pocket knife for projects around the house, the outdoors, and hunting
Length: 3.63 inches closed and 2.1 ounces
Limited Lifetime Warranty

Editor: I recommend purchasing the Case Sodbuster Jr. at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Victorinox Alox Cadet Review

by Dan Jackson 18 Comments

Think back to your first experiences with a pocket knife. If you are anything like me, it probably came in the course of exploring your father or grandfather’s desk drawers or perhaps rifling through that treasure box of items many men keep. Invariably, you would come across at least one well-worn red handled Swiss army knife (SAK). For many that would be their first encounter with a pocket knife.

Buy the Victorinox Cadet at BladeHQ

Buy on Amazon

And for many more, their first practical experiences with a pocket knife may very well have have been at boy scouts. I vaguely recall my first pocket knife while camping as part of my tenure at scouts. I am unsure on the exact model number, but it was some sort of a classic SAK. I would use it to prepare tinder for a fire, get ingredients ready for the dutch oven, and even used it to try my hand at carving one of those wood handkerchief slides. These were some of my first experiences with pocket knives. When I pause to reflect on those moments I am instantly transported back in to a much more simple and wholesome time of my life, with much of it centering around the ubiquitous Swiss army knife.

Fast forward to me starting to seriously get into the hobby of knives. My first “real” knife was a Benchmade Griptilian. From there I then ran fast and hard down the rabbit hole. I have handled many many pocket knives. Hell I have reviewed over a hundred here on this website alone. In my search for a perfect pocket knife I have spent thousands of dollars. At this point I don’t think twice about spending several hundred dollars on a single knife if it catches my eye. I’ve traveled to Blade show, joined a knife collecting club, appeared on podcasts, videos, and guest blog posts all to advance my interests in the latest and greatest portable cutlery.

But my knife collecting came full circle when a little over a year ago I was given the gift of a Victorinox Cadet. Mine was the very same unassuming blade that I would find in my father’s dresser drawer. Red plastic handles. Unassuming blade complete with the usual cap lifter and can opener. Instinctively, upon unboxing this new blade and admiring the snappy action of all the little tools I put the Victorinox into my pocket. It has been over a year later, and I haven’t left the house without some sort of a SAK since.

For many I am surely preaching to the choir. This is after all, the quintessential pocket knife. An unwavering staple in the every day carry of men the world over. I still want to pay my respects, write this review, and share with you a tool that I hold quite near and dear; the humble Victorinox Alox Cadet.

General Dimensions and Blade Details

The Alox Cadet has an overall length of 5.75″, a 2.5″ blade, and weighs 1.6 ounces. Victorinox makes the Cadet in a number of variations, I happen to like the one with the silver aluminum “alox” handles because it keeps the knife nice and thin and seems to wear a little better than its plastic-scaled counter parts. It’s also worth noting that Victorinox makes larger and smaller knives with the Alox handles as well. Ones that quickly come to mind include the Pioneer (larger) and Classic (smaller).

The Cadet is the perfect size for daily carry. Mine rolls around loose in the bottom of my pocket every day. At a sub $25 price point, I could care less if it gets beat up by my flashlight and car keys. Even if by some freak accident the knife it were to fall out my pocket some day I would have no problem plunking down the coin for another one.

When I am at work this is the only knife I carry. I spend most of my day behind a desk banging away at a keyboard or talking on the phone, so this little slip joint is plenty of knife for the things I do, which is mostly opening letters and packages. At home the Cadet can often be found cutting up apples, smearing cheese onto crackers, or handling whatever other minor task I may have at hand.

The thinly ground blade of the Cadet slices as good or better than anything else I have handled. Seriously, it’s a little laser and it cuts really well. Whatever stainless steel Victorinox uses sharpens very easily and doesn’t stain. This is a softer steel so it doesn’t earn a blue ribbon for edge retention, but it holds a decent edge and a couple licks on a strop will restore it to hair shaving performance at the end of the day. I’d say it’s on part with 8Cr13MoV and other lower end steels. The only other maintenance I perform is regularly washing the knife out with hot soapy water.

When I’m not at work I may clip a larger folder to my pocket, but the Cadet still comes in handy as a secondary blade. It’s perfect for situations where you don’t want to bust out a large knife, and the extra tools are real handy too. Victorinox includes a nail file / phillips driver, a can opener, and a bottle opener/flat head driver. Next to the blade my bottle opener sees the greatest amount of use, but the drivers can come in handy and the file can maintain your fingernails in a pinch. In a sub 2-ounce package you won’t find much else that packs as much utility as the Cadet.

Handle, Ergonomics

Handle construction of the Cadet is simple, but everything is clean and nicely finished. The knife is pinned together. The tools and backspacer are given a high satin finish while the aluminum handles are given a matte finish. After a year of daily carry and use my Cadet does show some signs of wear, but it is still a handsome knife. The action for all the tools is still springy and satisfying and there is no play with any of the parts.

A discussion of the “ergonomics” of the Cadet is almost laughable, as I have never used the knife for tasks harder than breaking down a cardboard box, but the handle is big enough to get 4 fingers around and is plenty comfortable for my needs. The handle texture is pleasing to touch and visually interesting. It provides some traction without being obnoxious. The red Victorinox shield provides a splash of color and that extra touch of class.

There is no pocket clip on the Cadet, which is just the way I like this knife. Unlike my $300 Strider PT, I have absolutely no reservations to pocket carrying the Cadet. It doesn’t need a little leather slip-sheath or anything like that, although Victorinox does include a split ring if you want to put a lanyard on it or attach it to your keys. It’s a beater knife and gets beaten up quite a bit in my pocket, but the slim design and durable aluminum scales allows the knife to age gracefully.

Victorinox Cadet Review – Final Thoughts

What is left there to say about the Cadet? Buy one. Seriously, this is an absolute must have knife. Buy a couple and give them as gifts to family and friends. You won’t find a nicer knife for $20 and you won’t find anything as functional and disarming either. That said, despite the small price tag this is still a very classy knife and it comes with an unexpected level of pride of ownership. And it performs too. This thinly ground edge can’t be beat for managing your mail and cutting up food. And all the extra tools are gravy… delicious, delicious gravy ladled on top of one of the finest little EDC knives money can buy.

If I had a gripe about the knife, it would be that I really like the little tweezers and toothpick included with the thicker plastic handled version of the knife, and sometimes miss that with the Alox Cadet. But there is a price to pay for style and durability, and the trade off is that Victorinox cant squeeze in those tools.

At this point I have waxed poetic about EDC knives for the better part of 5 years. This is the gold standard for EDC. Whether it’s your primary knife or a secondary blade paired with a larger folder or fixed blade, the Cadet is sure to get lots of use and will be appreciated by seasoned knife collectors and laypeople alike. I don’t say this often, but the Cadet is a must have knife.

Zero Tolerance (0450); With 3.25” DLC-Coated S35VN Stainless Steel Blade, All-Black Carbon Fiber and Titanium Handle Scales, KVT Ball-Bearing Opening, Frame Lock Reversible Pocketclip; 2.45 OZ., Silver, Small

Titanium frame lock houses hardened steel lockbar; frame lock secures blade in position so it does not close accidentally
Flipper works for left- and right-handed users; assists blade’s manual release with one-handed convenience
Finger guard, jimping and choil protect fingers during rigorous use while slicing, cutting, chopping, scaling, slashing, piercing or digging in any environment, in any conditions
Drop-point tip provides extra strength and chip resistance and eliminates pitch momentum
Overall length: 7.4 inches; closed length: 4.1 inches; blade thickness: 0.121 inches; weight: 2.9 ounces

$219.99
Buy on Amazon

I recommend purchasing the Victorinox Cadet at Amazon or BladeHQ. Please keep in mind that purchasing anything through any of the links on this website helps support BladeReviews, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Benchmade 940 Review

by Dan Jackson 37 Comments

Last Updated: September 4, 2019
If you are as obsessed with knives as I am, you may be on the hunt for “the perfect EDC knife.” You know, the one blade that has it all. Naturally, it is the perfect size, features great materials, is beautifully designed, and carries like a dream. But in my mind a perfect EDC needs to go beyond that. It has to be greater than the sum of its parts, and a little “X factor” never hurt either. Lets be real, for a knife to earn some time in the rotation is one thing, but to stand the test of time the knife has to work for you on another level.

Buy the Benchmade 940 at BladeHQ

Buy on Amazon

That is what drew me to the Benchmade 940. On paper it has all the basic requirements of a good EDC knife, which is always nice to see. But then the 940 had something else. Maybe it’s the unique handle, or the unconventional blade shape. Whatever it was, it drew me in like a moth to a flame, and I know that I am not the first to succumb to this emerald beauty. The 940 has been in Benchmade‘s catalog for well over a decade, and remains one of their most popular designs to this day. Needless to say, it is high time we gave this classic a thorough review.

General Dimensions and Blade Details

The 940 (or “940 Osborne”) has an overall length of 7.87″, a 3.4″ blade, weighs 2.90 ounces, and is made in the USA. In my mind these are real nice numbers for EDC, and that is exactly how I have been using my 940.

But I can also appreciate how the 940 could go beyond a mere EDC item. With an almost 3.5″ blade and an equally generous handle, the 940 could easily be pressed into a self defense role (although I sincerely hope you will never need to use it that way). On the opposite end of the spectrum, the 940 is a beautiful and elegant knife. In many ways exemplifies a modern gentleman’s folder. This is a knife that would do just fine in a suit pocket, or carried on special occasions. So I really like the versatility of the 940. It is fancy enough to make for an upscale EDC, but is big enough to get a lot of work done.

The blade on the 940 is a reverse tanto design. Popularized by the 940’s designer, Warren Osborne, this unique blade shape is best known for providing a sturdy tip, although I think the main draw is just the unique aesthetics. Warren has designed a few reverse tanto models for Benchmade, including the Benchmade Rift and I have generally been impressed by them. This particular blade has been given a high flat grind, and features a swedge running across the top. The 3mm thick blade holds it’s thickness pretty much to the tip thanks to the reverse tanto design. This is an interesting blade shape, and I found it quite capable for all my daily tasks.

The 940 Osborne makes use of S30V for the blade steel, an excellent USA made stainless from the folks over at Crucible. I have spoken about S30V many times before, but as a quick recap S30V is widely regarded as one of the best high end steels commonly found on production knives. When properly heat treated S30V is known for good edge retention, high corrosion resistance, relatively easy sharpening, and a good level of toughness for daily use. I am a big fan of S30V and Benchmade always does a fantastic job with heat treating their blades. Treated to 58-60 HRC, this 940 was no exception.

Handle, Ergonomics and Pocket Clip

The handle on the 940 is where things start to get interesting. First you have the striking aluminum handles. These have been bead-blasted to an attractive matte finish, and then anodized a deep green. I absolutely love the texture of these handles. They aren’t particularly aggressive, but they aren’t slippery either – given the intended use I found it to be a nice balance. Sandwiched between the aluminum handles is a single piece of anodized purple titanium. This backspacer compliments the green handles nicely, and provides a good deal of visual interest.

As for actual construction, the 940’s handle is top notch. There are partial stainless steel liners, and they have been polished to a lustrous shine. I like how when you peer inside the knife the liners reflect the titanium backspacer. It is a little detail, but some times it’s the small stuff that gets you going. Everything has been screwed together with black hardware, and all the pieces line up perfectly. The overall fit and finish of this knife is exceptional.

In 2015 Benchmade released the 940-1, a premium version of the 940 with carbon fiber handles and a S90V blade. It’s a beautiful knife and well worth considering if you are a fan of the original 940. Check out our review of the 940-1 here.

In hand the 940 is surprisingly capable. I say “surprisingly” because at a glance we have a rather thin handle here. In practice I found the handle long enough to comfortably accept my larger hand, and the rows of jimping on both the thumb ramp and finger choil provide a good amount of grip. It is a comfortable knife in forward grips, and I can get some good work done with it. The 940 also works well in reverse grip, and in the closed position as well. Actually, when closed, the 940’s thin profile makes it an excellent choice as a kubotan – another nice option to have.

The pocket clip on the 940 Osborne is a standard Benchmade clip – the same kind you will find in models like their classic Griptilian and Mini Griptilian. I am a big fan of this style of clip. It is simple, sturdy, and works quite well. Benchmade drilled and tapped this model for ambidextrous tip up carry. In pocket the 940 carries wonderfully. Thin and lightweight, this is a knife that you forget you are carrying.

Here is your pocket clip shot:

Deployment and Lockup

The 940 makes use of a pair of ambidextrous thumb studs and an axis lock. Much like many of the other Benchmade knives that I have reviewed with this configuration, deployment on the 940 is extremely fast and smooth. The thumb studs are easy to access allowing you to flick the blade out with alarming speed and very little effort. Phosphor bronze washers aid in that regard, and the net result is reliable deployment in any situation.

Similarly, the axis lock on my knife has also been really well done. Lockup is tight with no blade play, yet the lock is easy to disengage with a single hand, and the blade rotates freely into the closed position. It is no secret I am a big fan of the axis lock, and the 940 is a great example of why. If true one hand operation is important to you (as a righty or a lefty) then I find the combination of thumb studs and an axis lock very tough to beat.

Benchmade 940 Osborne Review – Final Thoughts

The 940 combines excellent materials with smart design and wonderful fit and finish to produce an exceptional daily carry item. On paper this has always looked like an awesome knife, so I was very happy to find that the 940 was just as awesome in real life. Everything works, and it works well. The way I see it, the biggest potential downside here is that the knife isn’t particularly cheap, but for a made in the USA folder with these kinds of features, I actually think the price is quite reasonable.

But what about beyond the specifications? Do we really have a “perfect” EDC knife? I must admit, there is something special about this one. The 940 has really distinguished itself as a design and it has a little something extra that keeps me coming back. I don’t doubt that for many people this will be a perfect EDC knife.

Sale

Benchmade - Osborne 940 EDC Knife with Green 6061-T6 Aluminum Handle (940)

ALL-AROUND UTILITY: A quintessential EDC tool that combines simplicity with unmatched function, no matter the application; Ideal for pretty much everything.
AMERICAN MADE CPM-S30V STEEL: For first-rate edge retention and corrosion resistance; Reverse tanto blade is nimble, versatile, and made for the outdoors.
DURABLE 6061-T6 ALUMINUM HANDLE: Is anodized, fully ambidextrous, has a smooth satin grip, and is suitable for just about any environment that requires a blade.
AXIS LOCKING MECHANISM: Ensures safety and a smooth open and easy close; Standard reversible clip; Light as a feather for easy carrying and a comfortable grip.
EVERYDAY CARRY: With its slim profile and lightweight design, the 940 is the perfect addition to your EDC collection, backpack, survival kit, tackle box, and more.

$221.00
Buy on Amazon

I recommend purchasing the 940 at Amazon and BladeHQ. Buying anything through the links on this website earns BladeReviews a small commission at no additional cost to you. All proceeds generated are used to keep the site running. Thank you very much for your support.

Spyderco Paramilitary 2 Review

by Dan Jackson 50 Comments

Last Updated: July 13, 2019
Poll any knife reviewer, knife YouTube Channel, or knife forum, asking what the best Every Day Carry (EDC) knife is, and the Spyderco Paramilitary 2 is going to come up time and time again. It’s a rock star in the EDC world, and for good reason. It’s a form follows function design with great cutting ability, great ergonomics, and that difficult to describe “X” factor that keeps people coming back year after year.

Buy the Para 2 at BladeHQ

Buy on Amazon

I originally purchased and reviewed this knife in 2012. Looking back, the review is a little stale, but the knife continues to be in my personal rotation of daily carry blades, and it continues to have captured the hearts and minds of knife enthusiasts around the globe. So I am going to try to break down why the knife is so good in this updated Spyderco Paramilitary 2 review.

And let me assure you that this is not some flash in the pan hot take. I’ve owned this knife for over 5 years now, and have compared it to hundreds of knives. I’m giving the review a major update in 2018. So strap in and lets explore why this USA Made gem continues to hit all the buttons for edged enthusiasts.

General Dimensions and Blade Details

The Para 2 has an overall length of 8.3″, a 3.4″ blade, weighs 3.75 ounces, and is made in the USA. This is a larger knife, designed to be either a tactical knife or a heavy-duty utility folder. I also know that for many, this is an EDC knife. Personally, the Para 2 is a little bigger than what I typically like to carry, but my knife has seen plenty of use on the weekends.

I must not be alone in finding the Para 2 on the large side, because in 2017 Spyderco released the Paramilitary 3. Ben wrote a full review on it.

The Para 2 features a classic Spyderco drop point blade. It’s been given a full flat grind and is made from 3.5mm blade stock. The knife has a nice amount of belly, an excellent tip and has proven to be a tremendous slicer. Rounding things out is a well ground edge that came extremely sharp. I have found that this is a great knife for food prep. For example, I had to slice a lot of large ciabatta rolls, and the 3.4″ blade really made easy work of the task.

You have the option of a satin finish (shown here) or a diamond like carbon (DLC) coating for the blade on your Paramilitary 2. I like DLC coatings a lot, they are about as good as a knife coating can get, but I have no experience with Spyderco’s formulation. I can say that everything I read about their DLC coating was favorable, and I love my satin finished version.

Blade steel is the very capable S30V. Knife enthusiasts won’t need me to say much about S30V, it has been popular for close to a decade now. But for the uninitiated this is an all around excellent steel. It has been usurped by S35VN and other even more premium steels over the year, but S30V remains more than adequate for most people. S30V is relatively easy to sharpen, takes a very nice edge, and can hold a good working edge for a very long time. It’s also quite resistant to rust and corrosion.

Spyderco has released a number of sprint runs of the Paramilitary 2 over the years in a wide range of exotic steels and handle colors. I’d like to see them upgrade the standard Para 2 to S35VN or CTS-XHP at some point. For the time being a premium version of the knife in S110V with blurple scales is available (apparently as a non-sprint run on Spyderco’s regular lineup for the foreseeable future).

And here is a size comparison with the Para 2 next to my Sage 1:

Handle, Ergonomics and Pocket Clip

The Paramilitary 2 handle is black G10 over nested stainless steel liners. The liners have been milled out somewhat to reduce the weight, and at 3.75 ounces the knife is very light overall. The corners have all been nicely rounded and the liners sit flush with the G10. Everything is screwed together and you have an open construction design with 2 pillars and a very large lanyard loop. All in all, handle construction is top notch.

The ergonomics on the Para 2 are outstanding. Spyderco has once again made excellent use of a 50-50 choil to give you more options and better control over your knife. A 50-50 choil is a finger choil made from both the blade stock and the handle. What I like about this is that you have the option of setting your hand back on the knife to maximize reach, or you can choke up for more detailed cutting tasks. Either way the handle is plenty big and extremely comfortable.

The 50-50 choil is part of the reason why so many Spyderco knives consistently get excellent ergonomic ratings from me. Rounding things out is perhaps one of the best jimped thumb ramps I’ve ever come across. The jimping is just phenomenal on this knife. It practically super-glues your thumb in place without being so toothy it’s uncomfortable.

The pocket clip is a standard Spyderco hour-glass shaped clip. It’s large and has a bright satin finish. It offers good retention and a decently deep carry. The clip works, but I’d love to see a blackened deep carry clip to come standard. That would make the knife more discreet in your pocket. Casey Lynch has developed a deep carry titanium pocket clip for the Para 2, and frankly I think I should get one of these. The standard Spyderco clip works, but it’s not my favorite.

The Spyderco Paramilitary 2 carries great in the pocket. Although this is a larger knife, the Para 2 is thin and relatively lightweight, so it doesn’t weigh down your pockets and doesn’t create much bulk. It’s no Dragonfly II, a knife I routinely forget I’m carrying, but the Para 2 carries surprisingly well for a larger knife thanks to the thin design.

Deployment and Lock

Deployment on the Paramilitary 2 is accomplished via an oversized Spyder-hole. And I really do mean oversized. At 14mm in diameter it is really a much bigger thumb hole than I am used to – but I quickly grew accustomed to it and now I absolutely love it. Deployment is incredibly, fast, smooth and consistent. This is a great knife to use with gloves and it ensures a smooth and effortless deployment with every flick. Backing up that oversized thumb hole is a pair of large phosphor bronze washers. These washers are very smooth and only get better as the knife breaks in. So deployment is just outstanding.

The Spyderco Paramilitary 2 makes use of a compression lock to lock the blade open. This is my first review of a knife with a compression lock, and my impressions of the mechanism are extremely favorable.

At first glance this might just appear to be a liner lock on the back of the knife – in practice that really couldn’t be further from the truth. The compression lock works by wedging a piece of the liner between the tang and a stop pin. As force is applied to the knife (from either the spine or the edge) the lock compresses and the sandwich of tang, liner and pin hold the blade firmly in place. The harder you push on the knife, the tighter the lock gets. It’s an incredibly strong design and is really quite ingenious.

There is no blade play of any kind with my knife, and the compression lock is easy to use with one hand. I like how you can disengage the lock and fold away the blade without placing your fingers within the path of the blade.

Another thing I really like about the compression lock is how easy it is to disengage with one hand. It may take a little practice at first, but it’s easy to close the knife one hand without putting your fingers anywhere near the path of the edge – a total impossibility with a liner lock or frame lock. This makes the knife infinitely fun to manipulate. In terms of pure blade-flicking enjoyment I rank it right up there with an axis lock. I’ve heard some accounts of the lock being sticky, I have not experienced that personally and would think that any stickiness would go away as the knife breaks in.

Here is a parting shot of my Para 2 next to the Benchmade Griptilian. And while I’m at it, here is a link to an article I wrote on the Spyderco Paramilitary 2 vs. the Benchmade Griptilian if you are trying to decide between the two.

Blade centering on my knife is perfect.

Spyderco Paramilitary 2 vs. Para 3

I’m sure many readers are looking for a size comparison between the Para 2 and Para 3. Ben reviewed the Para 3 back in 2017, and I acquired and reviewed a Para 3 Lightweight in 2019. Here is a size comparison between the two knives:

As you can see the Para 3 is significantly shorter. Now, I’ve got the LW version of the Para 3 so this isn’t exactly an “apples to apples” comparison, but the major difference between the Para 2 and 3 that I noticed is the shorter handle of the Para 3. It’s a good deal shorter. I’ve found the ergonomics aren’t quite as good on the Para 3, but it’s much more pocketable. That’s the biggest trade off.

You sacrifice some comfort and blade length for a smaller, easier to carry knife. True Spyderco fans will inevitably acquire both.

Spyderco Paramilitary 2 Review – Final Thoughts

The Spyderco Paramilitary 2 is just an outstanding knife. It’s no surprise that this is the EDC of a lot of serious knife collectors. If you poll a group of people who routinely purchase $100-500+ knives, odds are very good that a Paramilitary 2 is a serious part of their EDC rotation. This is for very good reason. You have a tough knife with premium steel that is wonderfully balanced, highly ergonomic, and extremely functional. When you factor in the ~$100 price tag and fact that it’s made in the USA, well, the knife just speaks for itself.

If you want a workhorse of an EDC or a robust folding tactical knife, I think that the Paramilitary 2 should be very high on your list. It easily makes my best EDC knives list and receives my highest endorsement.

Spyderco Para Military 2 Signature Knife with 3.42" CPM S45VN Steel Blade and Durable G-10 Handle - PlainEdge - C81GP2

An Improved Classic: Undeniably one of Spyderco's most popular and in-demand designs, the Para Military 2 distills the world-class performance of our legendary Military Model into a more compact, Pocket-Friendly package.
Superior Quality: We kept the same high-performance full flat-ground blade but we've also lengthened the blade's tip and added additional surface jimping to both the spine and finger coil.
A Secure Grip: The G-10 handle is narrowed at the end improving the Ergonomics. The handle and blade have been profile thinner; removing uncomfortable angles when in the closed position.
Easy-to-Use: The Para Military 2 features extreme strength, reliability, and ease of use of our patented Compression Lock mechanism and versatility of a 4-position pocket clip.
Dependable: Refinements to overall construction may not be drastic but from the G-10 textured handle to the steel full flat blade, everything is sharper, smoother and guaranteed to provide performance and user comfort.

Buy on Amazon

I recommend purchasing the Spyderco Paramilitary 2 at Amazon or BladeHQ. Purchasing anything through any of the links on this site helps support BladeReviews.com, and keep this review train running. As always, any and all support is greatly appreciated.

Benchmade Mini Griptilian 556 Review

by Dan Jackson 26 Comments

Last Updated: November 30, 2019
As much as I enjoy discussing the latest and greatest knives, sometimes we need to stop and appreciate the modern classics. As someone who tries to stay on top of all the new stuff coming out, I can tell you that the knife world moves at a breakneck pace. Companies are constantly introducing new and exciting models vying for our attention and dollars.

Buy the Benchmade Mini Griptilian at BladeHQ

No products found.

As much as I can appreciate their desire to shower us with awesome new products, I try to occasionally pause and reflect on the real classics in the world of modern folding knives.

Without a doubt one of these classic knives is the Benchmade Mini Griptilian. The little brother to the full size Benchmade Griptilian, the Mini Griptilian takes a lot of what makes the full size so great and shrinks it down into a package that is perfect for urban EDC. For most people this knife is everything you need, and nothing you don’t.

Lets take a closer look at this “modern classic” knife, and see what the Mini Griptilian is all about.

General Dimensions and Blade Details

The Mini Griptilian has a 2.91″ blade, an overall length of 6.78″ and a weight of 2.5 ounces. These dimensions make the Mini Grip ideal for EDC. This is a knife that is small enough to comfortably carry, friendly enough to use in public without questions, and still big enough actually get some work done when you need it to.

However, if you need something that is capable of bigger tasks can also work as a defensive knife, I recommend checking out the full size Griptilian. Here’s a size comparison between the two:

The blade on the Mini Griptilian is a classic drop point shape. This is a timeless design that features a hollow grind and a swedge. This gives you a nice tip for piercing and detail work, along with plenty of belly for common utility tasks. You have a choice of a satin finish (shown here) or a black coated blade. Benchmade also makes a tanto version of the knife and a sheepsfoot, and you have your choice of plain edge or partial serrations. All in all, you have an excellent blade here, with tons of options to make it your own.

The steel on the Mini Griptilian is 154CM. This is a nice all-around steel. It’s not quite a super steel by today’s standards, but definitely a mid to high end steel. I like how it is easy to sharpen and how it holds a nice edge for a good amount of time. 154CM is a proven blade steel that still gets used. Benchmade also offers this knife in S30V. Benchmade’s S30V is excellent, but I find little reason to upgrade from 154CM.

In practice, the Mini Griptilian performs great. I’ve carried and used mine for years. It has performed countless daily tasks. Whether that’s breaking down a box, or helping out with a car or construction project, the Mini Griptilian can get it done. When the edge eventually dulls, it’s easy enough to bring back on my Spyderco Sharpmaker.

Handle, Ergonomics, and Pocket Clip

The Mini Griptilian has a solid handle made of fiberglass reinforced nylon (FRN) over full stainless steel liners. Just so everyone is on the same page, FRN is fiberglass reinforced plastic. I have no problem with this handle material, although many consider it to be inferior to G10. It’s a lightweight and strong material that I have had a lot of experience with and have never had any issues (at all).

If the FRN bothers you, then pick up a G-10 Mini Griptilian. It’s more expensive, but a great upgrade if you have the money.

Underneath the FRN we have nested stainless steel liners. This is a solid handle design, with no flex. All the parts line up flush and are of high quality. Everything is bolted together for easy take down. Like the full size Grip, this is a closed back design.

Ergonomics on the Mini Griptilian are good for a small EDC knife. With larger hands I was able to get a firm 4 finger grasp without an issue. It’s a tighter fit than the full size, but it’s definitely doable (and remember, this is the Mini). Of course, being a Griptilian, this thing is tricked out in the texture department. Benchmade included tons of jimping, a nice thumb ramp, a good choil, and a tight diamond pattern on the handle scales. This knife isn’t going anywhere – in forward or reverse grips.

The pocket clip is the exact same clip found on the full size Griptilian, which is great. I am a huge fan of this clip, it’s a good size, offers good retention and buries deep. Benchmade gives you the option of ambidextrous tip up carry. The attractive flat black coating will wear off with use, but if you ever send this knife into Benchmade for service (or just email em) they will hook you up with a brand new clip.

As far as actual carry goes, the Mini Grip is effortless. The knife is fairly slim and at 2.5 ounces you will hardly feel it. This is a knife that you will want in your pocket every day. Here is a photo of what the knife looks like in your pocket:

Deployment and Lockup

Like the full size Grip, the Mini comes with either thumb studs or a thumb hole. I like the look of the thumb studs (plus it matches my full size Grip) so I went with that. Both options provide near effortless ambidextrous deployment. There are large phosphor bronze washers in the knife that account for the incredibly smooth deployment. Both my full size and Mini Grip rank the fastest deploying blades in my collection. Also, blade centering is perfect.

Here’s a size comparison with a Spyderco Delica and Spyderco Endura:

As far as lockup is concerned, the Mini Grip makes use of the now legendary Axis lock. I’m a huge fan of this style of lock because it is incredibly easy to operate with either hand, is strong and is incredibly elegant. Hands down this is my favorite style of lock. The axis lock on the Mini Grip has been flawlessly executed.

If you live in the US or Canada I really cant think of enough nice things to say about the Axis lock. However, if you are an international reader, you may need to consider that if the spring on the axis lock breaks (which has never happened to me), you would have to send in the whole knife for repair. This would be a hassle, and rather expensive. That is the only downside I can see to the axis lock.

After owning dozens of axis lock knives for years and years, I’ve never had an issue with an Omega spring breaking. But I do occasionally get comments from international readers saying that this has happened to them. It would be great if Benchmade reconsidered their policy in these conditions, and just shipped out a new Omega spring.

Here is a size comparison of the Mini Grip with a Kershaw Skyline:

Full Size Benchmade Griptilian vs. Mini Griptilian

Now if you are anything like me, you might be interested in the Griptilian series, but are unsure whether you want the full size or the Mini. To help you out I recorded a little video comparing the two knives. I hope this helps.

Benchmade Mini Griptilian Review – Final Thoughts

I originally published this review in 2012. In 2019 I performed a major update to the review, complete with better pictures, and updated thoughts after owning the knife for the better part of a decade. The Mini Griptilian is an outstanding knife, and it has remained in my daily carry rotation over the years. This smaller version of the Griptilian makes for a great discreet EDC. I have had zero issues with my knife. It has stood the test of time.

The Mini Griptilian is an absolutely fantastic EDC option. It’s lightweight, sturdy, and very well made. It should be no surprise that this is one of Benchmade’s most popular and iconic designs. Perhaps the only issue is the price. This isn’t a cheap knife, but it is wonderfully made and I think you get what you pay for. Plus, it’s made in the USA.

The Mini Griptilian is a knife with a proven track record and has earned its place as one of the Best EDC knives. I can recommend it without hesitation.

No products found.

I recommend purchasing the Mini-Griptilian from Amazon and BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Cold Steel Voyager Review

by Dan Jackson 34 Comments

Last Updated: February 25, 2018

New in 2011, the updated Cold Steel Voyagers took the knife world by storm. There was a lot to like about the original CS Voyagers, but as technologies advance old classics need updating. And I gotta say, the new version really packs some nice improvements. Lighter, faster, with better locks and beautiful details – there is a lot to love about these knives. With 3 sizes, 3 blade shapes and the option of fully or partially serrated edges there is something for everyone.

Buy the Cold Steel Voyager at BladeHQ

Buy on Amazon

I have one of each size for your consideration here (the Medium Voyager, Large Voyager, and the XL Voyager). After testing them all I can safely recommend any one of these knives. Take the “voyage” with me and learn why I like them so much.

General Dimensions and Blade Details

Since I’m reviewing 3 knives here I figured it would be easiest to throw the dimensions into a table instead of listing them out.

Model:
Blade Length

Overall Length

Weight

Extra Large
5-1/2″

12-1/4″

7.2 oz

Large
4″

9-1/4″

4.6 oz

Medium
3″

7-1/4″

3.1 oz

All the knives feel light for their size. Especially the Large and XL.

The 2011 Voyagers come in 3 major blade shapes. You have the classic clip point shown here, you also have a nice tanto version, and a version known as the “Vaquero.” The Vaquero is a modified clip point with a serious recurve. The knife you decide on comes down to your personal preferences. I think they are all pretty good, but the Vaquero will the hardest to sharpen due to the extreme recurve. I probably should have bought one of each blade style, but what can I say, I’m a sucker for a nice clip point.

And this clip point is really well done. Cold Steel started things off with a full flat grind. You also have a small swedge that forms a nice tip. There is plenty of belly and the edge is beautifully ground. Topping things off is an excellent stone wash. This blade finish really sets this knife apart. I greatly prefer the stonewash over Cold Steel’s teflon coating or blasted finish blades. All said and done the blade is really nice, especially when you consider the modest price tag.

Steel on the 2011 Voyagers is AUS 8. This changed to BD1 in 2015-2016. Both are softer steels. Cold Steel got a lot of feedback from customers wanting something with better edge retention than AUS-8, so they upgraded their premium line of knives to CTS-XHP (and then S35Vn in 2018), and their more budget oriented knives they upgraded to BD1. I don’t have a lot of experience with BD1, but it’s a softer steel. Easy to sharpen, and presumably holds a better edge than AUS-8. I think it was a good option for the Voyager series as the price is still reasonable.

Handle, Ergonomics, and Pocket Clip

The handle on the Voyager is a combination of grivory (Cold Steel’s proprietary high density plastic) over aluminum liners. Aluminum strikes me as a great choice for liner material here. It’s been hardened so we have good strength, and it’s nice and light. Grivory on its own is pretty tough stuff too, so we are left with a very robust handle design.

In addition to the materials, I’m a big fan of the way these handles have been put together. Everything is screwed together for easy take down. The aluminum liners are neatly nested into the grivory. Everything lines up well and has been well finished. This is a high quality handle and it really shows.

The ergonomics on the entire Voyager line are also very nice. Naturally you would expect the XL to work in your hand (and it does, in a variety of positions). The Large also functions quite well. The Medium had me most concerned as it was the smallest and was a knife I wanted to EDC. Poor ergos would have kept me from doing that. Thankfully, I was pleasantly surprised with how well the Medium fit in my hand. I wear a large glove and the Medium rested comfortably, with my pinky taking residence on the shelf making up the back part of the handle. I was even able to choke up a little (which I only recommend for light tasks). All the knives have deep finger choils and light jimping on the spine which give you a nice grip.

Speaking of grip, all of the knives feature a kind of “iron cross” pattern on the grivory. This pattern is nice and grippy, but is not so abrasive that it tears up my pockets (although some people have had some issues with this – which sanding lightly under the clip would fix). All the corners have been rounded and all the knives fill the hand really well. All in all I am very satisfied with the ergonomics on these knives.

The pocket clip on the Voyager generally great, but comes kind of stiff. It worked well with the thin shorts I wear down here in Florida, but I found the stiff clip a bit of a pain with thicker materials. However, it will naturally bend out with use, and if you want to you could always bend the clip out slightly yourself. You can only carry this knife in the tip up position, but I like how Cold Steel included 2 clips (for left or right side carry). I also like how CS gave these clips a black coating. The coating held up well in my 2 months of carry, although it finally started to wear off when I scraped it on some concrete.

As far as actual carry goes, the Voyagers are pretty good considering their size. They are thicker knives, and the Large and XL are quite big, but they are very light so they are more manageable than they appear. I know several people who regularly carry an XL around and I gotta admit the knife slips into my jeans really well. Between the three sizes the Medium Voyager was my personal favorite for every day carry. The stiff clip kept the knife in place in my pocket. All in all these knives carry well.

Deployment and Lockup

The Voyagers all use ambidextrous thumbstuds for deployment. They are good size thumbstuds, and it doesn’t take much effort to get any of the knives open (even the XL). I had my concerns that the backspring on the tri-ad lock would be too strong for easy deployment, but it really isn’t the case. I can even shake these knives open (with a good amount of force). CS put some high quality phosphor bronze washers in these knives and they feel very smooth. All in all I’m quite pleased with deployment.

All of the Voyagers feature the now legendary Tri-Ad lock. I’ve spoken at length about these locks. They are basically an improved backlock. They actually feature a stop pin, so any force applied to the blade goes to the stop pin instead of the rest of the lock. This feature, combined with a very beefy lockback, make the strongest lock on the market. Performance is excellent – to the point where these knives will almost act like a fixed blade.

But perhaps the biggest positive to these particular Tri-Ad locks is how Cold Steel adjusted the back spring. The Tri-Ad locks on both my Spartan and Hold Out II were very stiff. It took a lot of effort to disengage these locks, even after breaking them in. I was really concerned this would be the case for the Voyager. Again, I was absolutely wrong (man, sometimes it’s great to be wrong). The locks were very easy to disengage with one hand. Of course, they are still safe and stay locked when you want it locked, but when the time comes to put the knife back in your pocket, it won’t take a ton of pressure to disengage the lock bar. This is a huge win for the Voyagers.

Cold Steel Voyager Review – Final Thoughts

Cold Steel has really raised the bar here. The entire Voyager line is extremely well done. These are Taiwanese knives and I’ll tell you the fit and finish is fantastic. The various Voyagers sell in the $40-65 range depending on the size. At that price I think it’s a great value. Especially the Large Voyager. It’s hard to find a full size utility knife built this well at this ~$50 price point.

I continue to be impressed with how perfectly everything lines up, how wonderfully everything has been finished, and how smooth the deployment, lockup and disengagement is. From a design standpoint there is a lot to like. The great choice of blade shapes, the comfortable lightweight handles, the excellent lock, the awesome pocket clip, the great materials – I could go on and on.

So in conclusion, I like the Voyager series lot. It was one of the best releases in 2011, and when the upgraded the steel in 2016 they made the knives even better. In 2018 I still have my Medium Voyager. I find it a little thick for EDC, but it’s a hell of a work knife. If you are looking for a large utility knife then pick up a Large Voyager. Tough to beat. And if you are looking for a folding sword then snag the XL. The XL is a fun knife, but it’s not a gimmick.

Cold Steel 29TMCH Voyager Med

Blade Length: 3-Inch
Blade Thickness: 3 mm
Overall Length: 7 1/4-Inch
Weight: 3.5 oz (approx.)

Buy on Amazon

Sale

Cold Steel Voyager Large 4" AUS10A Clip Point Razor-Sharp Blade 5.25" Griv-Ex Handle Everyday Carry Tactical Folding Knife, Boxed

CLIP POINT BLADE - Lightweight, comfortable, and super sharp, the Cold Steel Voyager Large Clip Point folding knife is rugged, dependable and perfect for hunting and camping as well as general utility and daily cutting chores
AUS10A STEEL BLADE - The Cold Steel Voyager Large folding knife's blade is crafted from premium Japanese AUS10A steel, renowned for its outstanding corrosion resistance and remarkable ability to maintain a sharp and durable edge over time
ERGONOMIC HANDLE - The ergonomic Griv-Ex handle is reinforced with heat-treated 6061 aluminum liners to ensure ultimate durability; This handle provides great comfort and a secure grip even under extended use in tough conditions
TRI-AD LOCK - Equipped with Cold Steel's renowned Tri-Ad locking mechanism, the Voyager Large folding knife offers unparalleled strength and shock resistance; This locking mechanism enhances the knife's reliability and safety during heavy-duty tasks
SPECS - Weight: 5 oz (141.7 g); Blade Thickness: 3.5 mm; Blade Length: 4"; Blade Steel: AUS10A; Handle Length/Material: 5.25" Griv-Ex; Overall Length: 9.25"; Knife Type: Folder; Blade Shape: Clip Point; Locking Mechanism: Tri-Ad Lock

$46.00
Buy on Amazon

Sale

Cold Steel Voyager Clip 5.5 inch Plain Edge Knife

Blade thickness: 4 mm, Blade Length :- 5.5 Inches
Handle: 6.75 Inches long. Griv-ex
Blade style: Clip point
Steel: carpenters cts Bd1 alloy with stone wash finish
Pocket Clip: ambidextrous pocket/belt Clip

$80.80
Buy on Amazon

I recommend purchasing the Cold Steel Voyager at Amazon or Buy the Cold Steel Voyager at BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.