Tactical Knives

Kershaw Junkyard Dog II Review

Last Updated: August 11, 2019
To the average person the pocket knife has remained virtually unchanged over the years. But as collectors and enthusiasts know, this industry is full of innovation. In fact, I argue that there has been more innovation in knife design over the past 20 years than in the previous 200 years. The Junkyard Dog II Composite (JYD II) is a great example of this, with its ultra cool composite blade. Designed by Tim Galyean, the JYD II is a fantastic blend of fantasy and function and is proudly made in the USA.

No products found.

Purpose

The JYD II is not a small knife. I’ve read reviews where people are calling it a tactical. I’m not ready to call it that, and review it from that perspective, but I can kinda see where they are coming from. I would say the JYD II is more of a heavy duty EDC/utility knife. In a pinch it could be pressed into tactical use, but I think the blade shape was meant more for daily tasks (and hard tasks at that). Your mileage may vary.

General Dimensions and Blade Details

The Junkyard Dog II has a 3-3/4 inch blade and a closed length of 4 7/8 inches. This puts it right around 8 11/16 inches overall with a weight of 5.2 ounces. Like I said, the JYD II is not a small knife. You probably won’t want to bust this one out in the office, but it could make for a nice EDC if your job allows it. Some might find it a little on the heavy side but I think it is well worth it when you consider how much knife you are getting.

The blade is probably the first thing you will notice (assuming you get the ultra cool composite blade version – which I totally suggest doing if you are interested in this knife). This blade is in fact made of two kinds of steel. Kershaw chose a high end steel for the edge (CPM D2 tool steel), and a tough but decidedly less expensive steel for the rest of the blade (Sandvik 14C28N). From what I’ve gathered this is to reduce cost and make for a cool looking knife. Both reasons sound great to me.

On the subject of steel, the D2 edge steel is a great choice, with the CPM version being better. CPM stands for “Crucible Partice Metalurgy” and is a special process developed by the steel’s manufacturer, Crucible Metals. What Crucible does here essentially is powder the steel (by forcing the molten metal through a high pressure nozzle) and puts it back together so the grains are ultra tight on the molecular level. This was a poor explanation, but understand that the result is a finer steel and holds a better edge. Since D2 is already great stuff, we are talking about a pretty fancy piece of steel here.

Sandvik 14C28N is less impressive than the CPM D2, but it is still a great steel on its own (used in many popular Kershaw knives, like the Skyline and Scallion) and makes for an awesome “placeholder” for the D2.

So you are probably wondering how Kershaw puts these 2 pieces of steel together, and I was very curious myself. Apparently both pieces are laser cut, and then braze welded together with copper. The end result is a single piece of steel which is subsequently finished like any other Kershaw knife. The final bond is very strong. Kershaw claims it is as strong as a single piece of steel. I’ve never heard of the metal coming apart.

Ok, so a quick word on the blade shape. Again, I am hesitant to label this a “tactical knife” (not that my labels even matter – use the knife however you like) because of the blade shape. The tip is fairly blunt, and quite sturdy. Great for tough jobs, especially with that D2, but perhaps not the best choice for a defensive tool. Also, I gotta say the blade shape and overall “flow” of the knife kind of has a Ken Onion feel to it. Tim did work with Ken Onion at Kershaw, so perhaps that is where we get this design cue. Personally, I like it.

Handle, Ergonomics and Pocket Clip

The handle design and construction on the Junkyard Dog II is outstanding. We are looking at fairly typical handle construction: G10 over 410 stainless steel liners. The liners themselves are far less typical because they are some of the thickest I have seen on a liner lock knife. The addition of a FRN backspacer provides even more strength and rigidity (but makes the knife more difficult to clean). The result is a heavily built handle with a rock solid feel. Kershaw did attempt to lighten things up a bit by milling out the liners, and I think 5.2 ounces is pretty good considering how big the blade is and how thick these liners are.

The ergonomics are another outstanding aspect of this knife. The very nice (and unique!) design to the handle fits the hand comfortably and the textured G10 allows for a great grip. There is some jimping on the spine, but it is pretty “round” stuff. Probably due to the finish Kershaw puts on their blades. If jimping is your thing, you might want to modify this one, but I don’t mind it as is. Overall, I am very pleased with the handle design and ergonomics.

Now the pocket clip, well, that is probably my least favorite part of the knife. First of all, it isn’t reversible or ambidextrous, and I think it is far too big. I’m not a fan of the wide and flashy design either. The design is more a matter of taste (the look kind of “flows” with the rest of the knife) but I really hope Kershaw addresses the reversible and ambidextrous aspects of the clip. That said, this is an otherwise outstanding knife, and I would seriously consider getting the handle drilled/tapped and a custom low-rider clip made by a knifemaker like my friend STR.

Deployment and Lock

Like many Kershaw knives, the JYD II uses a flipper for deployment. I like flippers alright, but I’d love to see some thumb studs on here too – it’s what I’m used to most. That said, the flipper and the phosphor bronze bushings do a great job with deployment and the Junkyard Dog II moves very fast. Something to note is that this knife does not have the speed-safe assisted open mechanism common on a lot of Kershaw knives. I like the unassisted opening so I don’t count this against the knife. I know some people really like the assisted opening knives.

I’ve already commented on the liner lock, but just to reiterate, this is one of the more solid liner lock knives I’ve held. Kershaw did not skimp on the steel here and the liner covers almost 50% of the blade when the knife is open – very impressive. Despite this heavy liner, it is still an easy knife to close with one hand.

Kershaw Junkyard Dog II Review – Final Thoughts

One last thing to comment on is the value, and this knife has tons of it. If you go for the non-composite version the JYD II can easily be had for under $50. You will be hard pressed to find a new knife this big, strong and well made for under $50 folks, that’s just a fact (and it’s made in America too). The composite version is of course going to be more expensive at around $75, but even still that is a good deal for a very nice and unique knife with a high quality edge.

Well as you probably gathered, I really like this knife. Combine the heavy construction with a comfortable handle, a great blade and a cool innovation like the composite steel and there is not much left for me to desire. That said, the pocket clip definitely gives me some grief, but I can say that about a lot of knives on the market. All in all this is a very solid offering from Kershaw.

No products found.

Mcusta Tactility Review

by Dan Jackson 8 Comments

Last Updated: August 3, 2019
I recently reviewed a Mcusta MC-1 and I was impressed by this relatively little-known Japanese knife manufacturer. Based out of Seki, Japan, Mcusta is part of the city’s proud cutlery making tradition that began hundreds of years ago. If you haven’t checked out my MC-1 review yet, I loved the high end materials and modern manufacturing integrated into its classic design.

Buy the Mcusta Tactility at BladeHQ

Buy on Amazon

Today I am looking at another knife from Mcusta, the Tactility. I had high hopes for the Tactility and it didn’t let me down, so lets dive right into the review.

Purpose

As the name suggests, the Tactility is designed to be a tactical knife. However, I would narrow that down to “fighting knife” or “emergency tactical” – I would reserve it as a last ditch defensive tool. It is a very well made knife, but it is slim and lightweight and has a fragile tip. This isn’t a knife you would want to bring into the dark heart of war. Rather I see this as a highly specialized fighting blade.

Also, because this knife is so beautiful, it easily fills the role of a collectible. It’s an exquisite knife, balanced and light. Many people will want the Tactility just for their collection.

I do not recommend this knife for EDC. The blade is almost 4″ long and has little belly. The choil is set back on the handle and is designed to maximize reach. Sure, nothing is preventing you from EDCing this knife – and I certainly wouldn’t try and stop you, but to me this is not an EDC knife.

General Dimensions and Blade Details

The Tactility has an overall length of 8.2″ and a weight of 3.4 ounces. The 3.75″ blade is a modified drop point design with a partial hollow grind. The blade design has a very sharp point, ideal for for piercing movements, while the long swedge reduces weight and provides strength down to the tip. The hollow ground blade is pretty thin, which makes this knife an excellent slicer. This knife practically melts through paper, the point is so fine and the edge is so keen. It cuts like nothing I have seen before.

You have a couple options for the blade steel, both of which center around VG-10. You can get plain VG-10 or a laminated blade; damascus over a VG-10 core (shown in the photographs). VG-10 is a proven steel that I have written on at length. Suffice to say, I like VG-10 a lot. Mcusta applies an excellent heat treat so the extreme sharpness, edge retention and corrosion resistance that you expect from a VG-10 blade is in full effect with the Tactility.

Handle, Ergonomics and Pocket Clip

The handle of the Tactility is ultra slim and can come in a variety of different handle scale materials (various colors of corian or micarta in addition to several hardwood options) over solid steel liners. The handle is a pillar, or flow through design (which I love) that is held together by 3 torx bolts and provides for a clean look and easy maintenance. The liners haven’t been milled out, which would typically be a complaint, but the knife is still a mere 3.4 ounces so I can’t complain. One thing I like about liners that aren’t milled out is that they are very easy to clean.

One thing to notice is the absence of a lanyard hole with this knife. I would never put a lanyard on this knife, but I know some people like the option so I wanted to mention it.

As far as ergonomics are concerned, when you consider the primary purpose of the Tactility, Mcusta did a good job with this knife. The handle is spacious allowing for comfortable forward and reverse grips. I like how the wood has been nicely contoured and features 4 finger grooves that fit the hand very well. There is a large choil that sits about an inch back on the handle. It makes choking up on the blade unnatural but it maximizes reach – critical for a tactical knife like this.

There isn’t much of a thumb ramp, and the only jimping is found on the liner. Given the position of the choil, I find the jiming more than adequate.

The Tactility has a very nice pocket clip. I like how it allows for reversible tip up carry. It rides ultra deep and has a classy decorative look to it – more of that laser cut steel for you. I found clip retention to be very good.

Deployment and Lock

Depeding on if you get the VG-10 or Damascus version the Tactility has either dual thumb studs or a nice “modified spyder-hole” for deployment. The hole looks something like a half moon and allows for very easy ambidextrous one hand opening. The thumb studs (shown) are oversized and mine were made of blued titanium. Mcusta uses their signature teflon washer system for “buttery smooth” opening. This knife deploys quickly and quietly. While the teflon washers may be a departure from what we are used to seeing, they do an excellent job getting the blade out of the handle.

The Tactility uses a very strong liner lock. Mine locked up super early and there was no blade play at all. When you deploy the knife it makes a soft “click” – very stealthy. I was super impressed with the lockup and included a picture to show you what I am talking about.

Mcusta Tactility Review – Final Thoughts

The Tactility is just an outstanding knife. The tolerances, finish and materials are all top notch. It’s going to be hard to find a deadlier folding knife in this price range. If you are looking for an all out weapon of a knife and enjoy extreme craftsmanship, the Tactility could be the knife for you. That said, for those seeking a “hard use” folder or tactical knife, I don’t think this would be the best fit. I don’t think it’s a fragile knife, but find this knife better suited to the collector or someone wanting a high end EDC or a gentleman’s folder tactical knife.

As far as value is concerned, at the time of this article this knife can be found in the $130-150 range depending on configuration. At that price I think this knife is a great value. I would liken the build quality to a comparably priced Spyderco (which is superb), and I rank these among the highest quality production folders money can buy. For those on the fence, I suggest taking the plunge because you will not be disappointed with this knife.

Mcusta MCU122DR Damascus Tactility

Crafted from the highest quality materials
Built for performance and durability
Made in Japan

I recommend purchasing the Mcusta Tactility at Amazon or BladeHQ.

Emerson CQC-7 Review

by Dan Jackson 8 Comments

Last Updated: October 3, 2016
Tactical knives are trendy, and it’s easy to get swept up in the latest trends. While I have seen a lot of great new knives come out recently, I’m still drawn to the classics… and you can’t talk about classic folding tactical knives without mentioning Emerson Knives.

Buy the CQC-7 at BladeHQ

[easyazon_cta add_to_cart=”default” align=”center” asin=”B00W536APE” cloaking=”default” height=”42″ key=”tall-orange” localization=”default” locale=”US” nofollow=”default” new_window=”default” tag=”brdfkdfk-20″ width=”120″]

In fact, many credit Ernest Emerson with the original folding tactical knife and his decades of work as a custom knifemaker has brought numerous innovations to the industry. Thankfully, Emerson produces a line of production knives that puts his rugged designs within the grasp of the common man (his custom pieces are crazy expensive – if you can even find one for sale). One knife that showcases a lot of what Emerson Knives is all about is the Emerson CQC7. The CQC-7 is also the subject of today’s review.

“CQC” stands for “close quarter combat” and “7” identifies the model in this distinctive series of knives. The CQC-7 was actually based off of Emerson’s CQC-6 design (which is only available as a custom piece) and was licensed out to Benchmade in 1994. After that license expired, Emerson began producing the knife in his own factory. My point here is, this knife has been around the block. It’s a simple and brutally effective tool.

Over the years Emerson has produced a variety of sizes and styles of the CQC-7. I’ll be examining the standard CQC-7 with a 154CM combo edge, G10 scales, Emerson wave (more on that later) and a titanium liner lock.

Intended Use

The CQC-7 is fully intended to be a combat knife. The name alone should be enough to tell you that this knife is designed for up close, last resort, hand-to-hand combat, but I’ll be going into what specifically makes this a weapon. That said, you could also EDC this knife. Aside from its size, it has some interesting nuances that might dissuade you from wanting to carry this knife every day, but I know a lot of people who love the CQC-7 and use it for every day tasks.

General Dimensions and Blade Details

The CQC-7 has an overall length of 8.0″, a blade length of 3.3″, a weight of 4.0 ounces and is made in the USA. The CQC-7 comes in a couple blade shapes. I’m reviewing the version with the tanto blade shape (CQC-7B) although you can also opt for a drop point version (the CQC-7A) in various finishes. The tanto shape has an inherently strong tip which makes the knife ideal for stabbing and thrust cuts – the kinds of cuts you would be performing in a defensive situation. A downside to the tanto is that I find it harder to sharpen.

There are 2 very interesting features about the CQC-7 blade that I need to talk about; the wave and the chisel grind.

The Emerson Wave Feature

The Emerson wave is a small protruding piece of metal on the top of the blade (back by the thumb disk) designed for rapid one hand deployment of the knife. It works by catching the wave on the edge of your pocket and forcing the knife open. Operated correctly wave deployment is the fastest way to open up a folding knife. If I did a poor job explaining the wave feature here is a video. (I didn’t film this so don’t blame me if the music isn’t exactly your thing.)

The wave is a great feature if fast deployment is your thing. Other knife manufacturers employ a wave feature but Emerson is the original. One thing to keep in mind is that you have to be careful deploying a knife like this in public because it snaps open so quickly – the average person probably hasn’t seen anything like it.

Chisel Grind

The other major feature with the blade is that it is chisel ground. For those unfamiliar with a chisel grind, it’s exactly what it sounds like – the knife is sharpened on one side only like a chisel, and the “back” of the blade is completely flat. Emerson apparently has their reasons for doing this including that it is easier to sharpen, holds an edge longer, and it has become something of a trademark for them. If you hunt around they do make knives in the more common “V” grind, but the CQC-7 I am reviewing does not have this kind of grind. One issue with the chisel grind is that it is hard to get a straight cut, the blade tends to drift towards the chisel side of the knife. If you are going to use this knife for long and precise cuts you may want to consider a version with the “V” grind.

Blade Steel

Emerson went with CPM-154CM steel for the blade. Benchmade uses a lot of 154CM and it is an all around excellent steel. That said, when you consider the price of this knife new (in the $120 range) a lot of people like to see more exotic steels. Honestly, this is another point that I will leave for you to consider. Of course I would like to see a more exotic steel but I think 154CM is very good. I certainly wouldn’t make it into a deal-breaker.

Handle, Ergonomic,s and Pocket Clip

The handle of the CQC-7 is made of G-10 scales over titanium liners. The handle has a glass laminate backspacer and is held together with phillips screws. I always prefer the pillar, or flow-through, construction knives but I know that this knife was meant to be tough so a partial backspacer makes sense as it probably affords more rigidity. I also think that titanium was an excellent choice for the liners. It is both strong and light and is a big part of what keeps this full size folder nice and light. The phillips screws are an interesting touch. Emerson reportedly uses phillips screws for easy take-down in the field – it’s a little different and I like it.

The ergonomics on the CQC-7 is where this knife really shines. The handle is spacious and the edges are perfectly contoured to meet the hand. The G10 is nicely textured to provide good grip. There is some jimping on the large thumb ramp as well as the choil although the thumb ramp jimping is still pretty smooth. This knife feels great in both forward and reverse grips and is built like a tank. These are major concerns for a fighting knife so it’s no surprise that “the original tactical knife” has great ergonomics and solid construction.

The pocket clip is superb if you are right handed. It is blackened, and has great retention. Unfortunately, the clip is not ambidextrous. In my opinion this is a major misstep. Also, the clip isn’t reversible from top to bottom so you are left with tip up carry only. If you are right handed and want to use the wave feature this should be fine, but for everyone else the non-positional clip leaves something to be desired.

Deployment and Lock

The CQC-7 has two main deployment options, the wave and the thumb disk. I’ve already spoke at length about the wave method of deployment and there isn’t a whole lot to say about the thumb disk. It is a disk that sits on top of the blade and functions like a thumb stud. It is big and the edges are ridged and provides a lot of room for you to easily deploy the knife with your thumb. I like the thumb disk, and with a little practice it becomes very natural to open the CQC-7.

The pivot screw of the CQC-7 is actually a flat head screw. This is another departure from most “normal” folding knives where you will find a torx or allen head pivot screw. Again, Emerson selected this for ease of take down in the field. I find the slot of the screw to be a little thin and impractical, but if you had to take this knife apart in the field it could be done.

Emerson selected a titanium liner lock for the CQC-7. The lock is adequately thick and does a good job holding the blade in place with zero play in any direction. That said, for a combat knife you might want something more substantial like a frame lock, axis lock or even a lock back. Knifemakers are raising the bar and I have reviewed a number of knives with solid titanium frame locks. The CQC-7 might be a little behind the times here although I think if Emerson added a frame lock it would probably push the price right up to the $200 mark.

Emerson CQC-7 Review – Final Thoughts

After handling a number of production blades, I can safely say that the CQC-7 is a really unique folding knife. The wave feature, chisel grind, and nuances in design and construction make this a “love it or leave it” type of blade. Some guys only carry Emerson knives while others have had a few and decided to trade or sell them off.

Personally, the quality and history behind the knives intrigues me but I am somewhat turned off by the chisel grind, relatively high price tag, and especially the non-ambidextrous pocket clip. That said, Emerson does make dedicated lefty models and there is plenty left to appreciate about this knife. The rugged design, solid build quality, and details that make an Emerson, well, an Emerson continue to please a large number of tactical knife enthusiasts.

[easyazon_block add_to_cart=”default” align=”center” asin=”B00W536APE” cloaking=”default” layout=”top” localization=”default” locale=”US” nofollow=”default” new_window=”default” tag=”brdfkdfk-20″]

I recommend purchasing the CQC-7 at Amazon or BladeHQ. BladeHQ has a great selection of CQC-7s and their prices are very competitive. Purchasing anything through any of the links on this site helps support BladeReviews at no additional charge to you. Any and all support is greatly appreciated – thank you very much.

Photo Credits: Many thanks to Mr. Smashy for the great pictures of the CQC-7. Thanks again Smashy!

Please note that these pictures are actually of the Mini CQC-7 but the knives look very similar (with the only difference being the overall size of the knives).

Benchmade 710 Review

by Dan Jackson 23 Comments

Last Updated: December 29, 2018

I recently reviewed the Benchmade Griptilian, a model I consider to be a classic Benchmade knife. The Benchmade 710 is another one of those classic Benchmade knives.

No products found.

The 710 was designed by knife makers Bill McHenry and Jason Williams. This is a father and stepson team that invented the Axis lock. They subsequently and then sold the rights to the Axis lock to Benchmade. Benchmade asked McHenry & Williams to design a knife to feature this new locking mechanism and the 710 is what they came up with. The 710 is the first Benchmade knife to ever feature the Axis lock.

Since it’s introduction the 710 has received a lot of praise. Most notably the 710 earned the Shooting Industry Magazine’s Knife of the Year Award after it was introduced in 1999.

Needless to say both the 710 and the Axis lock went on to become big hits, and now more than a decade later both the knife and the locking system are still wildly popular among users and enthusiasts alike.

General Dimensions and Blade Detail

The 710 is on the large side. The overall length is 8.8″ with a 3.9″ blade, a blade thickness of .115″ and a weight of 4.5 ounces. Obviously this is not a feather light every day carry (EDC) blade. Personally I find this more of a “nights and weekends carry” when I can carry a bigger knife. That said I know plenty of people EDC the 710.

The blade is a modified clip point shape with an elegant unsharpened swedge that comes to a fine point, ideal for piercing and thrust cuts. The edge has a slight recurve which helps with draw cuts and allows the already long blade to perform like a slightly larger knife. The 710 has a hollow grind which begins high on the blade and makes this an excellent slicer.

Benchmade went with D2 steel for the blade. D2 is a “semi-stainless” high carbon tool steel known for its toughness and edge retention. Benchmade has heat treated the blade to a rockwell hardness of 60-62 which is quite hard, especially before the introduction of super steels like S90V. The nice thing about D2 is that it can actually handle this kind of hardness without becoming brittle and chippy.

One potential issue with D2 is because it is such a hard and tough steel it is more difficult to sharpen. The recurve doesn’t help. This is the kind of knife that you will want to maintain regularly. Allowing this knife to get completely dull will make it difficult to resharpen without diamond stones. I would recommend a Spyderco Sharpmaker with diamond rods to maintain this knife. While I am able to keep a decent edge on my 710, I readily acknowledge that it is not the easiest knife to sharpen.

Another potential issue is corrosion. Like all steels, D2 can rust. D2 has a high chromium content, which helps to prevent rust, but there is not enough chromium to classify it as a stainless steel. D2 is comprised of approximately 12% chromium, and a stainless steel is usually classified as 13% or above. This is why D2 is often referred to as a “semi-stainless” steel. Regular cleaning and a little preventative maintenance will go a long way to combating issues with corrosion. However, you can see in the pictures of my knife some patina and staining that has formed.

Handle, Ergonomics and Pocket Clip

The 710 has a G10 and stainless steel handle with a Fiberglass Reinforced Nylon (FRN) backspacer. The 410 stainless steel liners have been skeletonized to reduce the weight and the machined G10 is very handsome. Generally, I like the handle a lot, although I do have some criticisms. First of all, I prefer open (pillar) construction with my handles. It makes the knife much easier to clean so to see a FRN backspacer here is a bit of a disappointment. That said, this isn’t a deal breaker and ultimately what we have here is a very strong handle.

What may be more concerning is the texturing on the G10 handle. The texturing is not that aggressive and the handle can become slippery when wet. On a tactical knife, this bothers me. Also, there isn’t a finger choil, which again can compromise the integrity of your grip. The McHenry and Williams flared the handle (in both the thumb ramp and finger choil area), this does help the grip, even in the absence of any functional jimping (which is typical for Benchmade and not an issue for me). If you are seriously considering the 710 as a weapon, I would try one out in person before committing the $140+ this knife retails for.

That said, the handle feels great with it’s rounded edges and lightly textured scales. For an EDC / user knife, the handle will be adequate for most purposes. I imagine Benchmade went with a slightly less grippy texturing to give the knife a more refined look and in order to appeal to a wider audience.

The pocket clip is a standard blackened Benchmade clip. The 710 allows for ambidextrous tip up carry. Some might lament the lack of a “4 corners” pocket clip, but personally, I only use tip up anyways so this is not a big deal (I’d love to hear some comments if this is truly an issue for you). The knife rides low in the pocket, with about a half inch of the handle poking out of the top. For me, this is perfect. I like something to grip onto when I am trying to pull the knife from my pocket.

Deployment and Lock

Not a whole lot needs to be said here, the deployment and lock of the 710 is excellent. This is largely due to the Axis lock and Benchmade’s stellar quality control. If I was writing this review back when the 710 first came out, this probably would have been the longest part of the review, but the Axis lock has been proven and I have written at length about it.

Just to cover a couple points however, the axis lock on the 710 is as smooth as butter. The knife has beefy phosphor bronze bushings which provide a low friction environment to allow the blade to fly out when deployed. With a little practice this knife can deploy almost as fast as an automatic. The lockup is very solid with out any play. I’ll also say the blade retention on this knife is also very good so you don’t need to worry about it accidentally opening in your pocket.

Benchmade 710 Review – Final Thoughts

The Benchmade 710 is a true workhorse of a knife. I have put my 710 through a lot over the years, and it has never failed me. It’s large and comfortable handle matches up to an equally large and sharp blade. The end result is a tool that is ideally suited for outdoorsmen, law enforcement, and military personnel. I enjoy the simplicity of the 710. It sort of reminds me of Glock handguns. It’s not a fancy design, but it works, and it forged the way for many excellent Benchmade knives featuring the axis lock.

With that said, the 710 is far from perfect. D2 steel was probably a great choice back when this knife first came out, but these days there are better options. Also the recurve makes this knife more difficult to sharpen. The recurve adds subtle elegance to the 710, but I’d be willing to sacrifice some classiness for ease of sharpening. Finally, the texturing on the handle is a little weak. For a work knife I’d like to see grippier G10.

The 710 is a classic with much deserved reputation. This is a design that has stood the test of time, and is still an excellent knife after all these years. At the end of the day, the 710 it cuts well and feels good in the hand. What else do you need from a big folding knife? If you are a fan of folding tactical knives, then you should check out the 710 at some point. This modern classic still gets the job done.

No products found.

I recommend purchasing the 710 from Amazon and BladeHQ. Buying anything through any of the links on this website earns BladeReviews.com a small commission (at absolutely no cost to you) and helps support the site. Any and all support is greatly appreciated. Thank you very much.

Spyderco Endura Review

by Dan Jackson 15 Comments

Last Updated: July 14, 2019
The Spyderco Endura is a knife that you won’t fully appreciate until you hold it in your hand. I remember when I first saw this blade at a local gun show. I had heard a lot about the Endura from friends and on various knife communities but it didn’t click until I picked it up and flicked it open. This knife has a 3.75″ blade, yet it is deceptively thin and light.

Buy the Spyderco Endura at BladeHQ

Buy on Amazon

Spyderco has had the Endura in its catalog for decades, and the latest version features several refinements over its predecessors, and is offered in a variety of handle colors. As a lover of large EDC knives the Endura spoke to me, and it wasn’t long before I had one in my pocket.

General Dimensions and Blade Details

The Spyderco Endura has a 3.75″ blade, a total length of 8.75″, weighs of 3.6 ounces, and is made in Japan. The appeal to the Endura is that it is a large knife, but is still lightweight and pocketable. You can use this as an Every Day Carry (EDC) knife, although I prefer its little brother the Spyderco Delica or the Dragonfly II for suburban EDC.

Here is a size comparison with the Delica:

The Endura features a long slender blade. It’s a pretty simple drop point shape, perhaps the biggest detail is that Spyderco has produced the 4th generation Endura with a full flat grind. A full flat grind is when the knife is one continuous grind from the spine down to the secondary bevel (the bevel that the edge sits on). Full flat grinds are very common in kitchen knives because they are so effective at slicing. The Endura is a great slicer, and the long slim blade is also good at penetrating soft targets. However, you will want to take care with the tip as it is fairly thin.

Spyderco selected VG-10 for this edition of the Endura. In my opinion, this was a decent choice. VG-10 is a Japanese steel that sharpens easily, offers good edge retention, and has great corrosion resistance. There are many higher end steels on the market these days, but given the price of the knife and its intended use as a working tool, I think VG10 was a reasonable choice here.

Handle Design, Ergonomics, and Pocket Clip

The Endura has a handle made of fiberglass reinforced nylon (FRN) with nested steel liners that have been milled to reduce weight. Generally, I like the FRN handle, it keeps the knife light, is comfortable, and comes in a variety of colors, including blue, white, gray, green, brown, orange and yes, even camo. I will say that it isn’t the strongest handle design, even with the steel liners, and that is probably my biggest issue with the FRN Endura. But for light to medium use, the Endura handle should hold up well and provide the user a lot of use.

Ergonomics on the Endura are good. It’s a long knife so you have plenty of room for multiple styles of forward and reverse grips. You can set you hand back on the knife to maximize reach, or choke up and make use of the well jimped thumb ramp for detail work. The FRN has rounded and contoured corners that work well with the aggressively textured flats. The texture is Spyderco’s proprietary “bi-directional texturing” and allows for a firm grip in almost any condition. All in all, the Endura has a solid handle design backed by smart ergonomics.

The Endura has a well implemented pocket clip. It’s a standard Spyderco spoon style clip, and it has been given a black coating. The clip rides decently low and offers good retention in the pocket. I especially like how the clip can be mounted on any of the 4 corners of the knife. This is truly a well done ambidextrous pocket clip.

Deployment and Lock

The Spyderco Endura makes use of a large 13mm thumb hole for deployment. Fans of thumb holes will no doubt be very satisfied with the one on the Endura. The “Spyder Hole” is well placed and provides lots of room for your thumb. My knife opens easily with the flick of a thumb thanks to the smart design and low friction phosphor bronze washers. Spyderco also makes a waved version of the knife, so if you like that kind of deployment you could consider the waved version.

The Endura utilizes a lock back to lock the blade in place. The knife I am reviewing began developing some blade play after months of daily carry. Today the bladeplay can be removed if the pivot is tightened down further, but it makes the deployment more difficult. Having done some research I’ve concluded that slight amounts of up and down blade play are not uncommon on the Endura.

I think this is due to the design of the knife. When you have a knife as long and as lightweight as the Endura with FRN scales and nested liners, it’s just not going to be able to hold up to hard use as well as other designs. If you are looking for a more hard use folder from Spyderco, I recommend checking out the Paramilitary 2.

Speaking of the Para 2, here it is next to the Endura:

Spyderco Endura Review – Final Thoughts

The Spyderco Endura has been a staple in Spyderco’s lineup for decades, and with good reason. This is a knife that is easy enough to carry every day, but big enough to be used as a serious tool or defensive option. Like with many of Spyderco’s offerings the company has been slowly refining it’s designs to improve their products and meet consumer demands. The current iteration of the Endura features an attractive full flat ground blade, a removable 4 position pocket clip, and it comes in a number of different handle colors. These are nice improvements on an already solid design that is based around Spyderco’s philosophy of making useful tools that can be appreciated every day.

I like pretty much everything about the Endura. The materials and fit and finish are both very good, I love how everything is fully ambidextrous, and the choice of handle color is fun. Generally speaking the Endura is a well thought out knife that gets the job done. Spyderco has massaged this design over the years and it remains a classic choice among enthusiasts. Although there are a lot more “gee whiz” options out there today with super steels and fancy materials, the Endura remains a no-nonsense choice for a larger EDC or tactical offering.

My only real gripe is that there is a potential for blade play to develop. For that reason I don’t recommend the Endura as a hard use tool, but rather as a light to medium use EDC knife. If you want a larger EDC or folding tactical knife that is slim and light weight, then the Endura should be high on your list of knives to consider.

Spyderco Endura 4 Lightweight Signature Knife with 3.80" VG-10 Steel Blade and Purple FRN Handle - PlainEdge - C10FPPR

Front-Runner: The Endura 4 sets the standard as one of the best-selling folding knives ever made. All members of the Endura 4 family include a four-position clip, a high-strength back lock mechanism, and Trademark Round Hole.
Wide Spectrum of Handle Colors: Whether you enjoy bright colors or neutrals, our Endura 4 Flat Ground knives are designed to suit every taste. We offer Black, Blue, Green, Gray, Orange, Purple, Zome Green and Brown.
Light and Durable: This Endura handle is fabricated with Fiberglass Reinforced Nylon. FRN is a polymer mixed with glass fiber that is injection molded and formed into a sleek textured handle, creating a lightweight yet high-strength knife handle.
Low Friction: This knife features a blade ground with flat bevels that extend from the spine all the way to the cutting edge. This grind reduces drag during cutting and decreases overall weight.
A Secure Grip: To provide a non slip grip, these knives are molded with our patented pattern, Bi-Directional Texturing. This texture pattern consists of opposing graduated steps radiating outward from the center of the handle.

If you would like to buy a Spyderco Endura, I recommend purchasing it at Amazon.com or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Benchmade Griptilian 551 Review

by Dan Jackson 29 Comments

Last Updated: November 30, 2019
The Benchmade Griptilian is a household name in the knife world. It is one of Benchmade’s most popular designs and it appears in countless variations.

Buy the Benchmade Griptilian at BladeHQ

No products found.

For many, this will be their first “real knife”. A gateway blade into the world of high end pocket knives. It was one of my first nice pocket knives, so it holds a special spot in my heart. What’s interesting, is that I still have and use this knife almost a decade later. I originally wrote this review back in 2011, so this is a very long term hands-on review of the Benchmade Griptilian.

General Dimensions and Blade Details

The full size Griptilian has an overall length of 8″, a 3.45″ blade, weighs 3.25 ounces, and is made in the USA. This isn’t a small knife, but Benchmade has managed to keep the weight down. By way of comparison, the Mini Griptilian has a a 2.9″ blade, an overall length of 6.78″ and a weight of 2.56 ounces.

If you are at all like me, you may be on the fence about whether to get this full size Griptilian or the Mini Grip. I actually purchased a Mini-Grip first, but I ended up swapping it out for a full size because I wanted something with a full size handle. I know a lot of people who prefer the Mini-Grip for an EDC knife. It’s all a matter of preference.

Depending on whether you are looking at the thumb hole version or the thumb stud version the knife will have either a sheepsfoot blade with a thumb hole or a drop point blade. Both blade shapes come in 154CM stainless steel and both blade types will have a long hollow ground edge with plenty of belly. The drop point edge is very attractive to me, so that is what I ended up purchasing. It has a swedge that finishes in a fairly stout tip – good for piercing tasks. The knife was extremely sharp out of the box. All in all this is a very nice blade which is great for EDC chores.

The standard Grip comes with a blade made of 154CM stainless steel. 154CM is a highly regarded stainless steel manufactured by Crucible Industries in the USA. While fancier (more expensive) steels have come on the market in recent years, I still appreciate 154CM because it takes a nice edge and is easy to sharpen. I actually prefer 154CM over S30V in many applications because 154cm is so easy to sharpen, while S30V can be stubborn to sharpen. 154CM is a proven steel and is a good fit for a working man’s knife like the Griptilian.

Handle, Ergonomics, and Pocket Clip

The handle of the Griptilian is made of Valox, which is an injection molded high density resin. It’s plastic. I know some people don’t care for the Valox handle because it has a lightweight and the plasticy feel. Personally, I think it is a practical choice for the handle as the material is both lightweight and tough, but I understand how fans of more substantial knives could be turned off by the product.

After years of people complaining, Benchmade finally issued a G-10 version of the Griptilian and Mini Grip in late 2015. I still like the original plastic handled version, but the G-10 version is beautiful and definitely an upgrade. Check out my review of the G-10 Griptilian here.

This handle has a closed back design, which means it is a little more difficult to clean than a knife with pillar construction. The handle is held together with screws and everything is nicely finished. Benchmade makes a ton of these knives and they seem to have their manufacturing and quality control protocols dialed in.

As far as ergonomics are concerned, the handle is chunky and covered with texturing. I would expect no less from a knife called the “Griptilian”. There is a run of jimping on the spine of the blade, and little jimping in the plastic placed strategically around the handle. The knife feels good in the hand and there is no lack of traction. I have used my Griptilian for years now and it continues to be a solid performer.

The Griptilian comes with Benchmade’s standard steel pocket clip. The clip is a classic no-nonsense design that has stood the test of time and can be found all over Benchmade’s lineup. The handle is drilled and tapped for ambidextrous tip up carry. All in all this is one of my favorite clips. It has great retention, buries deep and looks normal. The only potential issue is that the black finish will quickly began to wear like mine has. That is not an issue for me, and if you send the knife in for sharpening, Benchmade will include a new clip.

How does the Griptilian carry? While the Griptilian is lightweight for its size, this is a thick knife. At over half an inch thick you will likely notice it in the pocket. All said, it carries well. The standard clip is not a deep carry pocket clip, but it buries most of the knife into your pocket. Here is a pocket shot:

Deployment and Lock

Whether you opt for the version with thumb studs or the thumb hole, the Griptilian deploys with alarming speed. Seriously, this is one of the fastest deploying and smoothest opening knives I own and it’s one of my favorite features of the knife. I’ve taken mine apart for cleaning a couple times, and Benchmade has installed some of the biggest phosphor bronze washers that I have ever seen on a folding knife. No doubt this is part of the reason why deployment is so smooth.

The Griptilian uses Benchmade’s axis lock which I have written about quite a bit in the past. It’s an excellent lock and it really works well with the Griptilian. There is a lot of weight in the blade which makes it easy to really flip the knife out fast and it makes for a solid lockup. Also, the axis lock gives you a variety of ways to open and close the knife. I find myself playing around with the deployment of this knife a lot. It’s a durable locking system that allows the knife to easily be open and closed with one hand.

Benchmade Griptilian 551 vs. Benchmade 551-1 G10 Griptilian

As I mentioned in the handle section, Benchmade released the 551-1 G10 Griptilian in 2015. This was after years of people complaining about the plastic handles of the original 551. I have both the G10 and regular version, and wrote an in-depth review of the G-10 Griptilian.

Here is a picture of the original Griptilian, the 551-1, and a Doug Ritter Griptilian with Wilkins GRIP aftermarket G-10 handles:

The G-10 version is awesome, but it’s also about $100 more than the regular version. Naturally, people want to know if the G10 version is “worth it”. I can’t really answer that, because everyone is different and value is relative. Some people will see the value in the G-10 version, some people wont, and some people won’t even see the value in the regular FRN Griptilian.

I will say that the 551-1 is immaculate. Benchmade did an absolutely beautiful job with the knife, and I can easily see where the extra money went. They didn’t just slap on some G10 handles, they considered every aspect of the original Griptilian and tweaked it when building the 551-1. It’s a wonderful knife. If you have the money and interest, then my suggestion is to spring for the G-10 version. With that said, the original 551 is still as serviceable as it ever was, and remains one of my all time favorite pocket knives.

Benchmade Griptilian vs. Mini Griptilian

Ok, so you have decided that you want some sort of Griptilian. Often the hardest part is choosing between a full size and a mini. I recorded a comparison video for you to help make the decision a little easier:

At the end of the day, both the full size and Mini Grip are excellent knives. I can easily justify having both in my collection. With that said, if you have to pick one, then my blanket advice would be to buy the mini-grip if you plan on carrying it in a suburban environment (ie, if you plan to use it at work, and you work in an office). The full size Griptilian is a good size knife, and some will consider it threatening if you use it in public.

Here is a size comparison with the Mini Grip:

If you can get away with carrying a bigger knife and like bigger knives, then go for the full size Griptilian.

A Few More Comparisons…

Since the Griptilian is such an iconic knife, people can’t help but compare it to other knives. I’ve used it as a reference piece in a number of articles.

One obvious comparison is with the Spyderco Paramilitary 2. I actually wrote an entire article comparing the Para 2 with the Griptilian. Since I went into such detail in that article, I won’t re-hash it here, but it’s worth checking out if you want to compare the 2 knives.

Another interesting comparison is with the Benchmade Bugout:

I like the comparison because in many ways the Griptilian was the original lightweight folding knife, and the Bugout can almost be considered a refinement. The Bugout came out at least a decade after the Griptilian, and it benefits from a lot of refinements. It’s thinner, lighter, with blue anodized standoffs and a super thin blade.

The Bugout is a more expensive knife, but I really like it. I think it’s worth the extra money. Of course, there is room in my collection for both knives.

Benchmade Griptilian Review – Final Thoughts

The Benchmade Griptilian has a well deserved reputation of being both an outstanding pocket knife, and a modern classic. Benchmade started with a timeless and functional design, and built the knife to be lightweight, fast, and functional. The thickness of the handle and choice of plastic for the handle material will be turn offs for some, but personally I like how the the knife feels in hand, and have no problems with the choice of handle material. And these days we have the G-10 551-1, so if you don’t like the black plastic, go for the G-10.

My Griptilian has seen years of use, and it still finds a lot of time in my pocket. This is my highest form of endorsement. I have owned my Griptilian since 2011, and I still have it in my regular rotation. This is after reviewing hundreds of pocket knives. Over that course of time I have bought and sold dozens and dozens of knives. I still have my Griptilian and I still use it. That alone should tell you something.

I recommend the Griptilian if you are in need of a larger EDC knife or utility knife. If you are looking for a smaller knife, then check out the Mini Grip. Both are great. If you want something higher end, then go for the 551-1, or the 556-1. At this point there is something for everyone in the Griptilian lineup. You can’t go wrong with the Griptilian.

No products found.

I recommend purchasing the Griptilian from Amazon or BladeHQ. Buying anything through any of the links on this helps support the website at absolutely no cost to you. Any and all support is greatly appreciated. Thank you very much.