Collectable Knives

Spyderco Southard Flipper C156GBN Review

Last Updated: July 30, 2019
If you have been following the production knife scene the past couple years, then you know that titanium framelock flippers have gotten extremely hot. This has a lot to do with custom and mid-tech makers that often set the trends, which eventually trickle down into production knives. Larger companies have finally taken notice, and now they want their piece of the framelock flipper pie.

Buy the Spyderco Southard Flipper at BladeHQ

Buy on Amazon

This has resulted is something that Andrew and I refer to as the “framelock flipper arms race.” When Zero Tolerance released their 0560 model not too long ago, it upped the ante in terms of materials selection, build quality, and technology. ZT loaded their knife to the gills with features like a caged bearing system, 3D contoured handles, and even going so far as to pocket out the titanium to lighten the knife. The 0560 continues to be a technological marvel as far as the production knife industry is concerned, but other companies, including Benchmade and Spyderco, have stopped to take notice – to the point where both companies have released their first models featuring a flipper in 2012-2013.

In this case we have Spyderco’s addition to the framelock flipper arms race: the Spyderco Southard Flipper. They decided to damn the titanium torpedoes and embark on a high-end collaboration with acclaimed custom knife maker Brad Southard. Known for his practical and well engineered designs, Brad has slowly carved a name for himself since he started making knives full time in 2009. Brad subscribes to the ideology that form should follow function, and he ultimately believes that good design is a marriage of aesthetics and performance. Technology also plays a key role in his knives, and this collaboration with Spyderco is a veritable cornucopia of the latest and greatest. Unfortunately for the consumer the price tag reflects this as well, with the knife arriving with a whopping $399.95 MSRP.

Does the fabled Southard Flipper deliver enough bang for the buck to make it worth adding to your collection? How does it stack up to something like the ZT 0560? Lets find out…

General Dimensions and Blade Details

The Southard Flipper has an overall length of 7.96″, features a 3.46” blade, and weighs a solid 4.1 ounces. This is a jewel of a knife, beautifully manufactured for Spyderco in Taichung, Taiwan. Proud Americans may dismiss the knife offhand for having both a $250 retail price and the words “Taiwan” laser engraved on the blade, but I assure you the quality is 100% there. The knife is beautifully made and has a reassuring heft to it – made possible by thick slabs of steel, titanium, and G10.

As for the knife’s intended use, I mainly see the Southard Flipper as a collectible or high end EDC option. I have mostly been carrying mine on the weekends, as I find it a little too chunky to be paired with slacks in an office EDC. Your mileage will certainly vary.

The blade is a signature Brad Southard modified drop point design. Cut from a thick piece of Carpenter CTS-204P stainless steel, the profile swoops and slopes into an abrupt tip. The partial hollow grind terminates at a neatly applied edge, and the entire blade has been given the ever popular stonewashed finish.

CTS-204P is apparently the latest in a line of high performance steels from Carpenter. According to their data sheet this steel has been specifically formulated for high end cutlery applications. This is the part of the review where more sophisticated reviewers would spend a few moments to wax poetic about the chemical structure and technical merits of the steel, but I have neither the time nor the inclination for such diversions. Instead, I elected to simply start cutting stuff. Hey, at least I’m honest.

My knife came with an extremely sharp and aggressive edge. It almost reminded me of the M4 on my Gayle Bradley in how razor sharp and aggressive it was out of box. I actually moved to a new house in the middle of my testing phase, so the Southard Flipper got a chance to open up many cardboard boxes. It zipped through cardboard with alarming speed and efficiency. I decided at this point I wanted to try a more formal cut test to get a better feel for the knife and the steel.

I started out with a 6″ length of 3/8” sisal rope. I made cuts every inch. In some cases this is a difficult and painful test for me to get through. The Southard Flipper crunched through the rope without even blinking. It was one of the easier rope cut tests I have done, and the knife could have easily handled 2-3x as much rope.

I then moved on to some more cardboard boxes. The Southard flipper once again worked with impressive speed and agility as I cleanly cleaved a couple pieces of 3-ply commercial grade cardboard into confetti. At this point in the test I felt the edge could use some help, so I stropped it briefly. The 204p came back to factory sharpness with little effort – surprising considering how the blade has likely been heat treated to well over 60 hrc (Spyderco does not list the actual hardness of the steel).

I wrapped things up by whittling some 2x2s. It worked through the wood, but I was not super impressed with the carving performance of this knife. This shouldn’t be too surprising as the blade is 4mm thick and features a partial hollow grind. I found it was not the most efficient tool for cutting up apples either.

At the end of the day I was pleased with the performance of both the knife and the 204p steel. The steel is capable of taking an amazing edge, I had no issues with rust or corrosion, and the edge held up well. It’s a nice knife and is well suited for EDC tasks.

Handle, Ergonomics and Pocket Clip

The handle of the Southard Flipper is primarily comprised of titanium and g10. On the locking side you have a full titanium frame lock with a G10 overtravel prevention mechanism. On the non-locking side there is a brown G10 scale over a thick titanium liner. Everything is screwed together, and features flow-through (pillar) construction.

The knife is immaculately finished. The hardware gleams, every corner has been meticulously finished, and the knife feels like an absolute gem. The titanium liner has been drilled out to reduce the weight somewhat, but this is still a knife that I feel in my hand and in my pocket.

One thing to note is the asymmetry of the thickness of the handle; the non-locking side is noticeably thicker than the locking side. I am not sure if this was a conscious design decision, or if Spyderco was not willing to have the G10 side 3d machined like on the ZT0560. Since the knife is equipped with an internal stop pin and captured ball bearing system, it is necessary to have a metal liner of some sort. At any rate the asymmetry is interesting. In my video review I talk about the character of the knife and the odd juxtaposition of high end materials and meticulous finish next to the somewhat quirky and almost primitive design. I think it’s an interesting contrast, although I’m sure the asymmetrical handle will drive some people nuts.

Moving to ergonomics, I find the Southard Flipper to be extremely comfortable. A rope cut test is always a good workout for the handle of a knife, and hard carving / whittling can also quickly reveal hot spots and ergonomic issues. I found that the Southard performed fantastically in the rope cut, and was decently comfortable when carving. The knife is pretty thick and that chunkiness serves it well when putting some extra force behind the edge. The jimping on the spine of the blade is damn near perfect in my book. It’s got a little bit of traction without being obnoxiously sharp or painful. It’s just a comfortable knife.

In contrast, the pocket clip is a little underwhelming. Stylistically it looks cool, and is plenty sturdy / well made. However, I find it’s a little sharp on the tip, doesn’t exactly run with the lines of the handle, and doesn’t carry particularly well. I think a thick and heavy knife like this could benefit from a deeper carry clip. Although none of this strikes me as a deal breaker, I’ll openly confess that I feel the pocket clip is the weakest link.

Deployment and Lock

The more reviews I write the more I wonder how painfully obvious this section is. Of course what we have here is a flipper mechanism, and Spyderco’s first at that. I find it generally works pretty well.

When you have a firm grip on the flipper the detent is strong enough to easily pop the knife open. That said, I’ve flubbed the flip many many times, and wonder if an even stronger detent would be appropriate here. I’ll be the first to admit that this is me being nit picky, but on a knife of this caliber I might as well provide the entire story.

The knife does open nicely however, and the blade rotates smoothly around an over-sized pivot and caged bearing system. There is also the “trademarked” Spyderco thumb hole on the blade, but it’s impossible to use with your left hand, and a challenge to actuate with your right, so I find myself not having a whole lot to say about it.

Lockup is exceptional. My lock engages around 40-50%, and has been like that since the day I bought it. The lock engages easily, has no stick at all, and the knife is absolutely rock solid in every direction. The pivot must have some industrial strength [easyazon-link asin=”B0043EK14O” locale=”us”]loctite[/easyazon-link] on it, because I have been opening the knife obsessively for weeks and have yet to have a need to adjust it.

There is also a small g10 lock bar stabilizer inset into the framelock that matches the G10 scale on the opposing side. It looks interesting and does a good job of preventing the lock bar from over-extending. All said and done I am impressed with the lockup on this knife.

Spyderco Southard Flipper Review – Final Thoughts

So, Spyderco’s first flipper… did they nail it or fail it? I have to say, I like the knife a lot. Brad’s design is sexy and sophisticated, and the Taichung factory has once again produced an amazingly well built knife. Say whatever you want about overseas manufacturers, but the Southard Flipper is immaculately made.

The Southard Flipper also performs. It’s comfortable, balanced, and cuts nicely. I had a blast working through rope and cardboard. It’s not the keenest slicer, so chores like cutting apples and carving wood won’t be it’s forte, but overall the Southard Flipper is a capable tool.

If I had to point out the weaknesses of the knife, I’d say the pocket clip could use a little work, the flipper could benefit from a stronger detent, and I could live without the lanyard tube. Aside from that I find little fault with the knife. I will say once again that this is a heavier knife and in my pocket it is more appropriate for jeans or casual clothing – this is not a gentleman’s folder.

And lets spend a moment on the “value proposition” of the Southard Flipper. Some will balk at the $220 price tag, and I can appreciate that – this is an expensive knife, and it isn’t for everyone. But frankly, discussions about value don’t interest me much. Sure, I appreciate a good deal, and understand the value of a dollar, but much like a Chris Reeve Sebenza or a Strider SNG, we are looking at luxury items. No one ‘needs’ a Southard Flipper.

As someone who owns a wide range of folding knives I think the Southard Flipper will be well worth it to fans of high end Spydercos, and fans of titanium framelocks / flippers. It’s a beautiful knife.

And where does it stand next to the ZT 0560? Personally, I prefer the Southard. The 0560 is a cool knife, but I prefer the size of the Southard more and the knife has this wonderfully solid and well balanced feel to it. Practically speaking I find it more comfortable to cut with too. Sure, the 3D machining on the 0560 is nice, and it’s great to see the 0560 being made in the USA, but I still prefer the Southard more. Have an opinion? Feel free to leave it in the comments section below.

Spyderco Southard Folder G-10 Plain Edge Knife, Brown

Made using the highest quality materials
Tested for quality and durability
The most trusted name in you cutlery needs
Flipper blade opening device
CTS 204P hollow-ground blade

I recommend purchasing the Southard Flipper at Amazon, or BladeHQ. Purchasing anything through any of the links on this website helps support BladeReviews. As always, any and all support is greatly appreciated! Thank you very much for reading.

Strider SnG Review

by Dan Jackson 15 Comments

Last Updated: February 13, 2018
For many knife collectors the Strider SnG is a holy grail of sorts. Much like the Chris Reeve Sebenza, the Strider SnG represents the top of the line for production grade folders. Toss in a Hinderer XM, and you have what many knife collectors like to call “the holy trinity” of high end production blades.

Buy the Strider SnG at BladeHQ

I am by no means an authority on Strider, but if you are unfamiliar with the brand Strider was founded some time in the mid 90’s by custom knifemakers Mick Strider and Duane Dwyer. The company is headquartered in San Marcos, California, and their designs draw heavily from the strong military background at Strider. They make a number of fixed blade and folding designs, and have fulfilled contracts for the U.S. Military in the past.

Strider knives aren’t cheap, but the company has built a reputation on quality and has gained an extremely loyal following. I have always found the bold lines of their folders intriguing, and the rugged nature of the knives further piqued my interest. The SnG is their mid size folder, resting comfortably between the large SMF and the small PT.

General Dimensions and Blade Details

The SnG has an overall length of 8.25 inches, a 3.5 inch blade, and a weight of 4.4 ounces. The SnG could work well as a larger EDC, or as more of a large utility / tactical (self defense) knife. I will say that I was surprised at how lightweight the knife felt. With the SnG’s reputation as a hard use blade I expected some sort of folding brick to show up in my mailbox. Instead, I was pleasantly surprised with how manageable the knife felt. It quickly found its way into my pocket.

The blade on the SnG is a modified drop point design. My particular SnG happens to be flat ground, but I have seen hollow ground blades and tanto versions as well. Of course there are custom versions of the knife in every grind imaginable. Blade thickness on this knife is just over 4mm thick (.165″) and tapers down to a stout tip. Despite being a near full flat grind the SnG is quite thick behind the edge, and I found the cutting performance underwhelming. This is surprising considering the $400 price tag (intuitively, I would somehow expect the knives to cut better as the price went up), but when you consider the hard use nature of the blade it does make sense – this knife is designed to stand up to more than just cutting. The signature Strider tiger stripes are a result of a black oxide coating that has been partially sandblasted off. The tiger stripes are optional, but it’s a unique feature that is distinctively Strider.

Blade steel on this particular model is S30V. S30V is interesting because it was formulated specifically for knives, and is something of a collaboration between Chris Reeve and Crucible. S30V is a proven steel, and my experience with the steel has generally been very favorable. S30V sharpens without too much trouble, holds a nice edge, and is resistant to rust and corrosion. Strider’s heat treat for S30V was originally formulated by Paul Bos, an innovator in the world of heat treating who is perhaps best known for his in-house work with Buck (Strider used to collaborate heavily with Buck). Again, the thick geometry of the blade didn’t make this the most exceptional cutter, but S30V got the job done whether it was rope, cardboard, or wood.

Handle, Ergonomics, and Pocket Clip

The handles of the SnG are special because they feature a one-piece G10 scale and backspacer mated to a titanium integral lock. You do get a choice of color with the SNG (green, black, and brown are standard – various other colors are occasionally available), and Strider also offers them in concealed carry and Gunnar grip configurations as well. What is shown here is their standard “lego” style handle with brown G10 and a flamed titanium locking side. Everything is nicely cut out, well finished, and perfectly mated together. Oddly enough, what really impressed me about the handle of the SNG is the hardware. The body is held together with over-sized black domed screws, and the pivot is an equally beefy proprietary piece. However, I did notice one issue with the handle. The blade partially blocks the lanyard hole. C’est la vie if you want a Strider SnG.

From an ergonomics standpoint the SnG is a good size knife packed with features. I had plenty of room to maneuver my larger hand around this knife, and it accommodates a good number of grips. In the traction department the SnG is loaded down with jimping on both the spine and pommel for a secure hold in both forward and reverse grips. This is great if you plan on putting the SnG into a more “tactical” role, but I found the jimping extremely uncomfortable under hard cutting. Plan to wear gloves if you want to seriously test the SnG. The forward finger choil is great for choking up and does give you some versatility under use. All in all I found the SnG reasonably comfortable for a folding knife, but it’s not my first choice for sustained cutting.

Strider includes a removable right side tip-up carry pocket clip on every SnG. The clip is made of titanium, features good retention, and slips in and out of the pocket with relative ease. It’s a nice secure clip – a must when you are toting around a $400 folder. I’m sure many southpaws would prefer a reversible clip as lefty SNGs are quite rare and expensive.

All in all, I found that the SnG carried really well. The pocket clip doesn’t carry the knife very deep, but the knife itself is slim and feels light for its size. While it isn’t my first choice for school or the office, I do not mind having this as my primary EDC, and didn’t find it overly bulky or uncomfortable in the pocket.

Deployment and Lockup

The SnG uses an oval thumb hole for deployment. The thumbhole is easy to get at and the knife opens fast and smooth. It’s not a knife that flies open, but with a little wrist action I can get it done. Inside there are two bronze washers surrounding that massive pivot. The action is smooth and very pleasant. There are what appears to be thumb studs on the blade, but they are actually stop pins and don’t work super well as thumb studs. The ball detent on this knife is very good and it’s fun to watch the blade get “sucked in” upon closing.

Lockup is of course established via a beefy titanium framelock. This particular knife is a 9th generation SnG, and benefits from newly redesigned flat cut lock geometry. I have heard stories about Striders developing blade play, but this knife has held up really well. I have a very slight amount of side to side play, and no up and down. I’d tune up the pivot, but it requires a proprietary wrench that I haven’t acquired yet (really, it should come standard at this price). Lockup is pretty early and the titanium lock bar doesn’t stick at all. It’s also worth mentioning there is a small Hinderer lockbar stabilizer on the handle to prevent over extension of the lock.

Strider SnG – Final Thoughts

For many knife collectors the SnG will be something of a final destination in their knife collecting journey. It is an iconic American hard use folder with bold lines, contrasting finishes, and that kind of rough and tumble bravado that pairs well with a low slung Harley Davidson, a strong cigar, and several fingers of really good bourbon. I can totally see the appeal, and it’s been a lot of fun carrying, using, and admiring this really sweet folding knife.

However, I gotta be real here for a moment. If you are looking at knives from a purely practical perspective the SnG is functionally no better than something like a Spyderco Paramilitary 2. It’s not going to cut any better, the lock isn’t going to be any stronger, and it won’t feel any better in hand. But that’s ok, this is the nature of a luxury good. My $40 Casio keeps better time than a $5,000 Rolex – but I’ll be damned if I don’t own a Submariner one day. You buy a knife like this because you want it, and have a few extra dollars to spare.

That said, as a collector and an enthusiast I do think you get something more with the Strider. The G10 backspacer seamlessly integrated with the handle scale, the beefy custom hardware, the flamed titanium lockbar – these are a few details that make the SnG stand out in a crowd. You get something unique, tough, capable, and strangely refined. The only issue I could spot was the partially blocked lanyard hole – besides that this is a really meticulously executed knife. When it comes to titanium framelock hard use folders the guys at Strider know how to do it right, and the quality, materials, fit, finish, warranty, and U.S. manufacturing are all there. Simply said, it’s a great knife.

So if you want to buy an SnG, I say buy an SnG. I don’t think it’s perfect, and it’s definitely a luxury item, but at the end of the day it’s a really nice knife. While it may be the first Strider in my collection, I guarantee it wont be the last.

Strider SnG – $400
From: BladeHQ

I recommend purchasing the Strider SnG at BladeHQ. Please consider that buying anything through any of the links on this website (including Amazon) helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Spyderco Techno Review

by Dan Jackson 17 Comments

Last Updated: August 4, 2019
The Spyderco Techno is a small titanium framelock folder with all the fixings. It is designed by Polish maker Marcin Slysz, who doesn’t seem to have much in the way of background information on the internet. According to Spyderco, Marcin is an extremely talented knifemaker of international repute.

Buy the Spyderco Techno at BladeHQ

Buy on Amazon

I must admit, the knife designer’s pedigree isn’t what drew me to this one. Rather, I was taken in by the Techno’s charming design. Featuring bold lines and plenty of personality, this one really struck a chord with me. The fact that this knife also includes CTS-XHP supersteel and 6AL-4V titanium handles further piqued my interest. And when I learned it would be produced at Spyderco’s now legendary Taichung Taiwan facility, well, that sealed the deal.

General Dimensions and Blade Details

With an overall length of 6″, a 2.55″ blade, and a weight of 3.6 ounces the Techno falls firmly into what Spyderco likes to call “little big knife” territory. This a nice little nugget of a knife. It’s a great size for EDC and would also do well in anyone’s collection of titanium framelock folders.

The drop point blade has been fully flat ground from a very thick (4.5mm) piece of steel. Out of the box I wasn’t super impressed with how this knife cut paper, but I quickly gained respect for the Techno after attacking some super tough 5/8″ manilla rope, and carving up a pressure treated piece of pine. While the thick blade is not the most amazing slicer, the knife is ground relatively thin so you still have a capable cutter on your hands. The thick stock carries out all the way to the tip, leaving you with a stout blade able to handle a large variety of tasks.

Spyderco selected CTS-XHP steel, which has previously never been used on a production level Spyderco knife. This is also my first experience with CTS-XHP, and I was eager to try it out.

So far my experience with CTS-XHP has been extremely favorable. It’s a powdered stainless steel with an ultra fine grain structure. When I sharpened the knife I didn’t have any issues and it has held a hair shaving edge through a number of nasty cutting chores including the aforementioned rope and wood tests, a good deal of cardboard, and a number of little EDC tasks that I encountered in my several weeks of carry time. The edge holding was extremely impressive, I had no issues with chips or rolling, and saw no signs of rust or staining either. I would definitely place CTS-XHP above something like S30V, and I look forward to spending more time familiarizing myself with this steel.

Handle, Ergonomics, and Pocket Clip

The handle slabs are full titanium, and they have been given a tumbled finished for an attractive and easy wearing look. The handles have a smooth feeling to them (contrast it with a blasted finish on something like the small Sebenza), but it feels really high quality, and there actually is a decent amount of grip. There is a partial backspacer made of blue G10. I know some guys will really like the blue G10. Personally, I would have preferred to see titanium or carbon fiber instead. This is one of those “your mileage may vary” situations, so feel free to disagree. Overall, handle construction is rock solid. Everything screws together and all the edges have been nicely chamfered and meticulously finished. It’s really very impressive, and difficult to describe in a single paragraph.

The ergonomics on this knife are surprisingly good. It’s a small blade so naturally I wasn’t sure how it would fit my larger hand, but I can get a comfortable 4 finger grip here without issue. There is a run of coarse jimping on the spine that looks good and provides a little traction for your thumb. The back of the blade is also wide enough to accommodate your thumb, giving you plenty of room if you desire it. There is more jimping on the backspacer. Again, it is more for decoration than anything, but it does offer some traction. There are definitely more comfortable knives on the market (consider the Sage 2 if you want to keep it reasonably small and also in the Spyderco titanium framelock family), but all in all I am very pleased with how this knife feels in hand.

The pocket clip is the excellent Spyderco wire clip. This is a proven clip design that I personally have had a lot of experience with. This one has been sandblasted for a unique finish that will wear well, and it is positioned for ambidextrous tip up carry. I happen to be a big fan of the wire clip, and think Spyderco did an excellent job integrating it with the Techno. The knife rides very deep, and makes for an extremely discrete carry. At 3.6 ounces I did tend to notice this one in my pocket but, it’s not going to weigh you down.

Deployment and Lockup

Since this is a Spyderco, deployment is made possible by a thumb hole – this time of the 13mm variety. It is well placed for right hand access, and is easy enough to get at with your thumb. Unfortunately, lefties will have a slightly different story. The thumb hole is partially blocked by the titanium lock bar, and it is difficult to access with the left thumb. I can pinch out the blade with my thumb and middle finger, but don’t expect to open this like a normal Spyderco. I can also sort of flick the knife open with my index or middle finger, but really it is a design with right handed people in mind. I still like the knife despite these issues, but it’s definitely something to consider if you are a lefty eying this design.

The detent is firm, but the blade gives way to very smooth action aided by the phosphor bronze washers. Initially the knife was a little stiff, but that is because the tolerances are so tight. Mine almost immediately started to break in, and within a week or so of use it is became very smooth.

For lockup we have a titanium frame lock. Spyderco pays homage to the lock’s designer Chris Reeve, and refers to it as a Reeve Integral Lock (RIL) in the Techno’s documentation. This is a nice touch in an era of intellectual property shenanigans.

Practically speaking, I am extremely impressed with how this knife locks up. I hate to use hokey catch phrases like “this knife locks up like a bank vault,” but this knife locks up like a bank vault. It’s really impressive to slowly move the blade and hear the chunky framelock fall into place. My lock engages early (around 25%), hasn’t budged a millimeter (even after hard use and repeated flicking of the blade open), and there is zero blade play to speak of. Much like the finish of the titanium handles, you just have to feel this one for yourself to truly appreciate how nice it really is. It blows the Sage 2 out of the water, and gives the Chris Reeve Knives I’ve owned a good run for their money.

Spyderco Techno Review – Final Thoughts

Spyderco has another winner on their hands here. From a fit and finish perspective this knife is immaculate. If you have owned any of Spyderco’s other Taiwanese knives you will begin to understand where I am coming from, but even for their Taiwanese factory this knife is impressive. No doubt fans of Spyderco and titanium framelocks will find a lot to like with this little knife. It’s just really well done.

Now that I am done gushing over the knife I do have some caveats for you. First of all, it is expensive and small. I don’t necessarily have a problem with either of those things, but I’m not going to say this knife is for everyone either. From a cutting perspective the geometry is a little chunky. Spyderco did thin the blade out, but the relatively narrow profile and thick stock has its limitations. Also, the ergonomics are good, but not outstanding. So the Techno is far from a perfect knife – at least on paper. However, if you are willing to overlook that sort of thing, and approach the knife from a wider perspective, then I think you will be very pleased with the Techno. It’s one of the most solid folding knives I’ve had the pleasure of reviewing, and the feeling of quality I get from this knife is difficult to describe.

I also have to “keep it real” for my fellow lefties. This really isn’t a knife designed for us. I’ve managed to overcome the opening adversity, but unless you really like the design I don’t think it is worth the struggle.

All in all I’m really impressed with the Techno. If you like smaller knives and have the money, check it out. It’s a very cool little knife.

Spyderco Techno Titanium Plain Edge Knife

Collaboration with knifemaker Marcin Slysz
Fully flat ground CTS-XHP blade
Titanium handle with blue spacers
Chris Reeve Integral Lock (RIL) with a deep pocket wire clip
Closed Length (Inches): 3.43, Overall Length (Inches): 5.98, Blade Length (Inches):2.55, Blade Steel: CTS XHP, Grind: Full-Flat

I recommend purchasing the Spyderco Techno at Amazon or BladeHQ. Thanks for checking out the review.

Famars Lama Prima Edizione Review

by Dan Jackson 6 Comments

A relative newcomer to the cutlery scene, Famars is a company best known for crafting extremely high end shotguns. In fact, they happen to be the largest high end shotgun manufacturer in the world. Headquartered in Gardone, Italy, Famars has been creating functional works of art for over 50 years now, and build guns that seamlessly fuse innovative technology with old-world craftsmanship. So needless to say when I learned that this ultra high end firearms company was building knives, it got my attention. The Famars Lama Prima Edizione is their first foray into the world of luxury knives, and it is a real privilege to take a closer look at this very unique knife.

Described as the world’s first pinless dual-action automatic knife, the Lama is anything but typical; so in some ways this will depart from my typical knife review. After all, these knives are designed to compliment shotguns that can sell for hundreds of thousands of dollars. But while Famars’ products are the epitome of a luxury good, often featuring precious jewels and gold inlays, everything is built to be used. Their shotguns are most commonly used for hunting birds, and their new line of knives are designed to accompany the guns on such excursions. Of course a sleek folding knife like this would also be quite at home in a suit pocket or display case – functioning as an upscale EDC or simply a collectible.

Presentation

The Lama I received for examination is not just any Lama, but a Prima Edizione or “Premiere Edition” of the knife. Limited to 500 pieces, the Prima Edizione arrived in a lovely velvet lined wood box, and was accompanied by a signed and sealed certificate of authenticity. Each knife is one of a kind, and is both serialized and categorized within a historical log at the Famars headquarters. I must say I don’t typically spend much time mentioning the packaging materials, but the box is quite nice and provides an excellent spot to store the knife.

General Dimensions and Blade Detail

Moving on to the knife itself, the Lama is slender tool with an overall length of 7-3/4″ (with both blades deployed, 5-1/2″ with one) and 2 2-1/2″ blades. The weight will vary depending on the options you select, but expect a weight in the neighborhood of 2 to 3 ounces. And there are countless options to choose from. The review will attempt to touch on some of those choices, but really the sky is the limit and each knife is custom made to the purchaser’s exact specifications.

Famars allows you to build your knife around a wide variety of blade and tool options. My particular model came with two clip point blades honed to a razor’s edge. The inclusion of two blades was interesting, a departure from most modern folders. According Famars this was done to give the user more options. If you were to use this knife to dress birds in the field and one edge were to dull, then the user could simply switch to the other blade. Additionally, you have the option of selecting from a variety of other tools including scissors, a magnifying glass, or even a divot tool for golf fans.

You also have a wide variety of blade steels to choose from. The Lama is available in 416 layer patterned damascus (with many different patterns to choose from) as well as virtually any stainless steel you desire. Like with every other aspect of the knife the sky is the limit when it comes to steel selection. I found the damascus that my knife came in to be quite good; attractive, razor sharp from the factory, and holding a keen edge after use.

Handle and Ergonomics

The handle of the Lama is quite unique. When examining the exterior there is a distinct absence of any pins or screws holding the handle together. This is part of what gives the Lama it’s designation as the world’s first pinless dual-action automatic knife. The handle fits together thanks to some innovative design work, but more importantly the pinless design creates a wonderful canvas to showcase Famars’ exquisite engravings.

When it comes to the engravings everything is done in-house by hand, and there is no limit to what can be accomplished. Everything from gold leaf to jewels can be integrated into the handle of your knife, and their engravers can carve any motif desired. For those looking to have a knife that matches their shotgun, well, that is now possible. And naturally you get your choice of handle materials as too (including aluminum, steel, and titanium). Famars has also recently begun offering their knives with various exotic wood and animal hide inlays, more options if you somehow felt restrained by their previous selection.

Now, elaborate engravings and a dizzying array of materials is all well and good, but I am a stickler for performance and ergonomics. So I am happy to report that the Lama is just as pleasing to use as it is to look at. I am capable of getting a full grip without any problems and the thumb naturally rests on the spine of the knife. The handles have good thickness and fills the hand, and the “edgeless” design makes melt into your hand. And if you happen to be a fan of slimmer handles, Famars has you covered with their Piccolo model.

Deployment and Lockup

The Lama is a dual action automatic, and with the press of a button the blades spring to life. Both my blades fired fast and hard, and the flash of steel creates quite the conversation piece. Lock-up is solid thanks to a button lock, and the blades are also easy to release once you are done working. One interesting aspect about the knife is the absence of any kind of washers. The Lama is built to extremely tight tolerances so traditional phosphor bronze or teflon washers aren’t required. The fast action makes for a knife that is hard to put down, and with 2 blades at your disposal it is twice as easy to get carried away.

Famas Lama – Final Thoughts

Like something out of a James Bond movie, the Lama blends style and sophistication to create an exclusive tool with a lot of appeal. No doubt fans of the company’s beautiful firearms will also be interested in the Lama, and I can definitely see the allure to having a custom made knife that matches your custom made gun.

I can also see the Lama appealing to collectors of automatic blades and unconventional designs. There is currently nothing else like the Lama on the market, and for that reason alone it’s worth a closer look. Any way you cut it the Lama is a wonderful blend of old world craftsmanship and cutting edge technology, and should appeal to blade aficionados of all persuasions. It was an absolute pleasure to spend some time with this very exotic knife and I highly suggest checking one out if you have the opportunity.

For more information on the Famars Lama visit the knife’s official website at FamarsLama.com.

Spyderco Lum Chinese Folder Review

by Dan Jackson 13 Comments

Last Updated: August 4, 2019
I have always enjoyed Bob Lum’s elegant approach to designing knives. I have previously reviewed a couple of Bob Lum’s creations, including the Spyderco Lum Tanto and the Benchmade Onslaught.

Buy on Amazon

The Lum Chinese Folder is another elegant knife, and in some ways it is even more special than his other designs. To start, I love the sheer simplicity of this knife. The Chinese Folder is a single graceful curve in the both open and closed positions. There is a real feeling of balance with this design, and it results in a knife that is both a pleasure to view and to hold.

Spyderco has released many versions of the Chinese Folder over the years, but what you are looking at in this review is one of the original versions of the knife, manufactured in 2000. Furthermore, this knife has been serialized. That designates it as part of Spyderco’s first manufacturing run, also known as a Spyderco “Collector’s Club” knife. So what we have here is a very special version of the Lum Chinese, and I couldn’t be more pleased to share it with you.

General Dimensions and Blade Details

The Lum Chinese Folder has an overall length of 7-3/16 inches, features a 3-5/32 inch blade, and weighs a mere 2.8 ounces. The Chinese Folder could work as an EDC knife, a gentleman’s folder, or simply a collectible. Either way the size-to-weight ratio of the knife is pretty wild. A sub 3-ounce carry weight on this relatively large and sturdy knife is incredible. And I have to say, the Chinese folder feels impossibly light in hand. If this all sounds a little too delicate, Spyderco also makes a large version coming in at a beefier 4.3 ounces.

The blade of the Chinese Folder is often referred to as “leaf shaped.” What we have here is a graceful arcing blade that has been given a full flat grind, and a very small swedge running pretty much the entire length of the spine. This is not only a pretty blade to look at, but it is highly functional as well. The Lum Chinese is an exceptional slicer with its full grind and 3mm thin blade. Speaking of thin, this blade is very thin behind the edge, and is a big part of what makes the knife cut so well.

My Lum Chinese is made in Seki City, Japan and features Japanese VG-10 for the blade. A stainless steel, VG-10 is easy to sharpen and is capable of taking a razor sharp edge. It is also highly resistant to corrosion. I am a big fan of VG-10, and think it is a natural choice for the Lum Chinese. Fans of higher performance steel may be interested to learn that the Lum Chinese has also been previously offered in ZDP 189 as well.

Handle, Ergonomics and Pocket Clip

The handle on my Chinese Folder is aluminum, and has been given a green almite coating. Almite is simply a type of finish for aluminum (like hard anodizing). Over the years Spyderco has released the Chinese Folder in a number of different handle materials including carbon fiber, various colors of aluminum, titanium, and G10. I happen to really like the dark green color of this knife. It’s a deep green, and from a collector’s perspective I find the unique color to be extremely intriguing. As for actual construction, my knife is screwed together. There is a black G10 backspacer, and a single steel liner. Overall, construction is lightweight, but solid.

In hand the Lum Chinese fits surprisingly well, but is not without it’s caveats. The curvature of the handle matches the contours of my palm and the knife is quite comfortable to hold. Despite this, I wouldn’t recommend the Chinese Folder for anything beyond medium duty. The aluminum handles are somewhat slippery and there is no thumb ramp, finger choil, or any kind of jimping. For light to medium use I think the ergonomics are quite alright, but lets be honest – this isn’t a knife you will want to take to war, or be in your pocket aboard a commercial fishing boat. I really don’t mind that as the knife market is already well saturated with those kinds of knives.

The pocket clip is a simple stainless steel Spyderco clip. It offers good retention and makes the knife easy to insert and remove from your pocket. For carry options you have the choice of right side tip-up or tip-down carry. All-in-all I really like the way the Lum Chinese carries, it’s extremely light and very thin. This is a knife you will forget is in your pocket.

Deployment and Lockup

The Chinese Folder features a 12mm thumb hole that is easily accessible from either side of the knife. The Chinese isn’t the fastest deploying knife in my collection, but it opens easily and feels very smooth. Thin phosphor bronze washers aid in deployment.

The Lum Chinese has a thin linerlock and it snaps open crisply. It’s a very satisfying sound from such a small knife. Lock engagement is early, and I detected no zero blade play. I know that the somewhat thin liner lock will disappoint some, but given the intended use I have found it to be quite adequate.

Spyderco Lum Chinese Folder Review – Final Thoughts

The Lum Chinese is a graceful knife that is a delight for all the senses. I have greatly enjoyed mine, and spend a fair amount of time admiring the clean lines, the beautiful handles, and the crisp action. The knife works, and it will certainly cut, but the form-over-function approach to the ergonomics keeps this knife from becoming a real user for me. That doesn’t mean I don’t like the knife, but I just want to “keep it real.” If I had to pick one EDC knife to take to the grave, then the Lum Chinese wouldn’t be it. But if I was looking to add an elegant and unique Spyderco to my collection, well, I’d be all over this one. I feel that the Chinese Folder is a very special knife, and it has been an absolute pleasure to spend some time with this gem of a folder.

At the time of this review the Lum Chinese Folder can be had in both a carbon fiber version and a large version in black G10. If you really like the knife then I recommend picking up a couple. Like my original green-handled beauty, you never know when the knife might slip out of production.

Spyderco Lum Chinese Folder – $139.95
Retail Price: $219.95
You Save: $80.00
from: BladeHQ

I recommend purchasing the Lum Chinese Folder at Amazon or BladeHQ. Thanks for checking out the review.

Benchmade 581 Barrage Review

by Dan Jackson 18 Comments

Benchmade has always struck me as a company that both innovates and inspires. They can take a functional object, refine it’s performance, and give it a slight twist to elevate a knife something beyond mere G10 and steel. That is a rare accomplishment in the world of production knives, and this handsome 581 Barrage a perfect example.

Buy the Benchmade Barrage at BladeHQ

Buy on Amazon

Simple, robust, and crafted with just a touch of class, I absolutely love the details on this knife. And the details are always so glorious. That’s why I keep reviewing Benchmade knives. They all but beg for a closer examination.

General Dimensions and Blade Details

The 581 Barrage has an overall length of 8.35″, a 3.6″ blade, and the knife weighs 5.2 ounces. This is another Warren Osborne design, and the man is a master for a reason – he’s designed yet another lightweight and functional knife. I’m going to classify this one mainly as a tactical knife, but it would make a nice larger EDC as well. Some might call this a “gentleman’s tactical knife,” and I don’t think there is anything wrong with simply collecting this one either!

The 581 sports a drop point blade, which is a departure from Warren’s usual designs for Benchmade. This is a long sloping blade with a slight amount of belly and a thin swedge running along the top. The blade stock on this knife is 3mm thick, and the resulting tip is quite sturdy. This isn’t a knife with a ton of belly, but it should be fine for most normal tasks. The grind is either a partial flat grind or a shallow hollow grind, it’s difficult for me to really tell, and I don’t think it particularly matters. Either way I’ve found the knife to be a very capable slicer (and it came wickedly sharp).

Blade steel on the 581 is Bohler M390. This is a powdered steel, and is currently the most advanced blade steel that Bohler makes. Benchmade heat treated this M390 to between 60-62 HRC, and the stuff can really retain an edge. It’s also a high Chromium steel so you have excellent corrosion resistance too. My edge has held up so well that I’ve yet to need to sharpen this knife, despite weeks of carry. I understand that when the time does come to touch up my edge, it will take a fair amount of work. That’s to be expected from a hard and tough super steel like this.

Handle, Ergonomics and Pocket Clip

The handle construction is one of my favorite features of the knife. I know some won’t be fans of the aluminum bolsters, but it’s a unique look and I really like it. From a practical standpoint, this isn’t a cold weather knife (since there is bare metal on the handle) but down here in Florida I’d say it compliments my shorts and sunglasses nicely. Construction is screw together, and in addition to the combination of G10 and aluminum scales, you have full stainless steel liners (milled out to reduce weight), a full backspacer, and a small lanyard hole. It’s a beautifully constructed handle.

All in all, I’d say the ergonomics on the 581 are quite good. I mentioned the handle is boxy, but that doesn’t mean it’s uncomfortable. There is a good amount of thickness to the handle and it fills the hand nicely. The finger choil region benefits from some grooves that have been milled into the scales. I thought these were merely decorative at first, but they also provide some traction for your index finger. The thumb ramp is completely naked, and I feel like this is another Benchmade design that could benefit from a little jimping (at the slight expense of aesthetics). If you really wanted some traction, you could always cut little slice of skateboard tape and apply it to the thumb ramp. Since this is a tactical knife you may be interested in how the 581 feels in reverse grip – I’m happy to say it feels great. All in all this is a very comfortable knife. I’m not as fanatical about jimping as some, but do I feel like a little jimping on the thumb ramp would round this one out in hand.

The pocket clip is a classic Benchmade “split arrow” clip. It’s a great clip, proven time and time again in many of my other Benchmade knife reviews. Retention is excellent, it’s a nice discrete clip, and the knife rides low in your pocket. You have the option of ambidextrous tip up carry – which works great for me.

Deployment and Lockup

The 581 is an assisted opening knife that makes use of dual thumb studs. This is my first review of an axis assisted opener, and I must say I’m quite pleased with it. For normal use I think an assisted opener on a well made knife is unnecessary, but for a tactical knife it could mean the difference between life and death. The thumb studs are very easy to reach and with a little pressure the blade springs to life. This is a very smooth and very fast deploying knife.

One thing I found extremely interesting about the 581 is that Benchmade covered the pivot with the bolster. So this isn’t a knife that has been designed to be tuned. It basically says “we turned this knife perfectly from the factory, you will never need to service the pivot.” It’s a bold claim, especially for an assisted opener that exerts so much force on deployment. But I’ll tell you, I have no problems with blade centering at all. The knife locks up like an absolute vault, and the blade travels smooth as silk along phosphor bronze washers. And the tolerances on this knife are very very tight. We are almost talking Sebenza tight here. This is a real testament to Benchmade’s quality control and manufacturing capabilities. It’s incredible.

And of course the lock here is the famous Axis lock. The assisted opening makes 1-hand closing something of a challenge but it’s not impossible. Lockup is absolutely rock solid. The Axis lock has yet to fail me – on any knife. This is a fantastic lock and it rounds out a great knife.

Benchmade 581 Barrage Review – Final Thoughts

Well, there you have it, Benchmade has produced another outstanding knife. By this point in the review half the readers probably assume I’m on their payroll or something, but truthfully I can’t find much to fault with this blade. I love the beautiful lines, the rich details, the excellent materials, and the incredible level of fit and finish. And it never hurts to discover that this knife is made in America. I can’t find a single issue with my knife, although I feel a touch of jimping on the thumb ramp would make the Barrage slightly better in hand.

I know this is a fairly expensive blade with a retail price of around $200, but I feel like this is an instance where you truly get what you pay for. For those out there considering a Benchmade 581 I can totally recommend it. Benchmade has once again taken a humble folding knife, applied their magic, and have created something that appeals to users and collectors alike. Having a 581 in my collection has truly been a pleasure.

Benchmade - Barrage 581 Knife, Drop-Point Blade, Plain Edge, Satin Finish, G10 and Aluminum Handle, Made in the USA

HIGH-QUALITY: The 154CM stainless steel blade is tough, rust resistant, and holds an edge well. The Valox handle is strong and stable, making it ideal for everyday use.
WELL-DESIGNED: The Barrage family is the first to feature the AXIS Assist. The Barrage 583 can be opened and closed quickly with either hand.
ALWAYS READY: The 583's quick, one-handed opening makes it easy to hold and use. The reversible pocket clip offers ultimate accessibility.
VERSATILE: The Barrage 583's tanto blade has a very high tip strength, making it good for tactical uses. It's also versatile enough for everyday applications.

Benchmade 581 Barrage – $204.00
Retail Price: $220.00
from: BladeHQ

I recommend purchasing the Benchmade Barage from Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.