• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

BladeReviews.com

Knife Reviews

Menu
  • Home
  • Reviews by Brand
    • Al Mar Knives
    • Benchmade Knives
    • Boker Knives
    • Buck Knives
    • Cold Steel Knives
    • Chris Reeve Knives
    • CRKT Knives
    • DPx Gear
    • Emerson Knives
    • ESEE Knives
    • Fällkniven Knives
    • Fantoni Knives
    • Gerber Knives
    • Great Eastern Cutlery
    • Hinderer Knives
    • Hogue Knives
    • Ka-Bar Knives
    • Kershaw Knives
    • Kizer Knives
    • LionSteel Knives
    • Mcusta Knives
    • Mora Knives of Sweden
    • Microtech Knives
    • Ontario Knives
    • Opinel Knives
    • Reate Knives
    • Rockstead Knives
    • Schrade Knives
    • Shirogorov Knives
    • Smith & Wesson Knives
    • SOG Knives
    • Spartan Blades
    • Spyderco Knives
    • Steel Will Knives
    • Strider Knives
    • Victorinox Knives
    • Viper Knives
    • Zero Tolerance Knives
    • Close
  • Reviews by Purpose
    • EDC Knife Reviews
    • Tactical Knife Reviews
    • Survival Knife Reviews
    • Hard Use Folding Knives
    • High End Pocket Knives
    • Gentleman’s Folders
    • Rescue Knives
    • Traditional Knives
    • USA Made EDC Knives
    • Close
  • Reviews by Class
    • Folding Knives
    • Fixed Blade Knives
    • Assisted Opening Knives
    • Automatic Knives
    • Machetes
    • Titanium Frame Lock Knives
    • Close
  • Best Of
    • The Best EDC Knives
    • Best Survival Knives
    • Best Tactical Knives
    • Best High Value Knives
    • Close
  • Gear Reviews
    • Flashlight Reviews
    • Multi-Tool Reviews
    • Watch Reviews
    • Knife Sharpener Reviews
    • Close
  • FAQs
    • Knife Care and Maintenance
    • Knife Dictionary
    • Knife Steels
    • Steel Composition
    • Interviews
    • Close
  • Contact
  • About
    • About
    • Privacy
    • Links
    • Close

Shirogorov

Shirogorov Ne0n Review

by Aaron Shapiro 1 Comment

I spend a lot of time imagining what it must be like to create a masterpiece. Putting the final brushstroke on Monet’s Water Lilies or for John Frusciante to idly strum the opening chords to Can’t Stop for the very first time. What must be to be involved in the creation of something truly great. That must be something like how Sergey and Igor Shirogorov felt when the Ne0n was designed. It’s rare for me to be such a fan of a knife, this came together in a perfect storm of materials and lines to make something that I truly enjoy putting in my pocket. Although to spoil the ending, it does have one major flaw and that is cost. This is an expensive knife, but in my eyes, I find it well worth the ask.

Shirogorov Ne0n Thumbnail
Buy the Shirogorov Ne0n at BladeHQ

The Shirogorov lineup is a confusing one. They make many different models that seem almost identical to someone that isn’t familiar with their collection. The Neon is one of Shiro’s smaller pieces, the “Zero” or Ne0n has some additional features that earn it this moniker. We’ll get into the specifics here shortly, but suffice to say that I think this is one of the pocket friendliest high-end EDC knives available that isn’t made in Boise.

All Measurements are my measurements and may differ from manufacturers specifications.

  • Blade: 3.25”
  • Overall Length: 7.75”
  • Thickness: .53” with the clip
  • Blade Thickness: .13”
  • Steel: M390
  • Weight: 3oz
  • Lock: Titanium Framelock with Steel Lockbar Insert

Blade Details

I’ve had two different folks refer to the blade on the Neon as different shapes. It’s a coin toss between a traditional drop point or a subtle reverse tanto. I’m on team drop point, as the spine of the blade DROPS to the point but I’m not going to fight about it. The finish that Shirogorov has used is a really fine, matte stonewash on the blade. This finish is perfect, in my opinion. It catches the light nicely, doesn’t show tape stickies when you’re opening packages or breaking down boxes, and hides any machining marks from manufacturing.

Shirogorov Ne0n

In practice, this knife is a pure laser beam. It moves through paper like it’s not there. It’ll cleanly quarter up an apple to go with your turkey sammy. Cardboard holds no power against the mighty Zero. This is largely due to the thin blade stock and perfectly executed flat grind. Speaking of the grind, it’s pretty remarkable. The plunge lines on either side are perfectly executed and matched. I’m certain that Shirogorov is grinding these, at least mostly, with some sort of CNC machine, but the angle and precision are unusual (and good to see). Just like the plunge, there is a thin swedge that runs the length of the blade until you reach the negative angle near the tip. It’s a very sharp swedge that’s perfectly symmetrical the whole length of the blade.

Shirogorov Ne0n in an Open Hand

So, steel… Shirogorov generally makes good steel decisions, in my opinion. They continued that trend with the Ne0n here when they picked M390. M390 is the same (or at least similar enough) to 20CV or CTS-204P. It’s stainless steel that is known for its good edge retention. I’m not one for cut tests or any other of exhibitive “sharpness testing,” let’s just say that I’ve pretty much carried this knife exclusively for a month or so, using it for everything I’d use a knife on, and it’s still SCARY sharp.

Handle, Ergonomics, and Pocket Clip

Let’s go over the handle finish first. It’s a dark tumbled finish. I’m not going to pretend that I know how they achieved the finish that they did, but it appears to be a “smoother” tumbled finish than I’ve seen – it will, however, repel wear well. I want to point one element of criticism that I’ve heard: I’ve heard people comment on the coarseness of the handle finish. By this I mean you can see some of the tumble marks from the media. This isn’t a problem or even unattractive in my eyes; tumbling after all is just a collection of repetitive scratching. I just wanted to comment on it.

Shirogorov Ne0n Ergonomics

Ergonomically, the Ne0n is just so great. I wear a large glove and this knife sits perfectly in my hand. The handle tapers right behind the pivot then flares back out as it moves into your hand. The edges are all either radiused or chamfered, there are no sharp edges on this handle. It’s super comfy.

Shirogorov Ne0n Blade centering

The Ne0n’s pocket clip is really interesting. It’s milled from titanium and built using a hidden screw construction. It works great, if you turn and look at the bit that contacts the knife scale you’ll notice that it doesn’t touch the lock bar at all. So provided that you keep your fingers on the clip when deploying you won’t run into any “failures to launch,” due to lock bar pressure.

Shirogorov Ne0n in the Pocket

To round this section out I wanted to touch on a couple of key features that Shirogorov incorporated into this knife. If you look inside of the handle you can see that there is a channel milled out of the backspacer to accommodate the blade. The blade is slightly longer than the handle scales themselves, so the tip and edge sit inside the backspacer. Next, I wanted to point out the milled relief near the flipper tab, this allows you to get a solid press when you’re opening the knife. I think this particular detail adds to this knife’s excellent action.

Shirogorov Ne0n Pocket Clip and Lanyard Hole

The lanyard attachment point is equally cool to see. There’s a milled relief towards the rear of the handle that opens up the area around the backspacer to allow for a paracord lanyard to pass through the loop on the backspacer itself. This shows an extra level of detail simply due to the fact that what Shirogorov could have done is allow the backspacer to extend past the scales, but instead of increasing the overall profile of the knife, Shirogorov came up with this clever solution. I can only guess that this along with some of the other elements they’ve folded into this knife increased the cost of production, but it shows the quality of their design. At least that’s my opinion.

Deployment and Lock

The lock on the Shirogorov Neon is a pretty straightforward frame lock with a steel insert. It’s nice to see a steel insert included on this knife, it should prevent any undo lock wear and extend the lifetime of that framelock.

Shirogorov Ne0n Frame Lock

The real special sauce on this knife, however, is the MRBS employed. MRBS stands for Multi-Row Bearing System, the name pretty much describes what this is but I also think a picture on Bladeforums is worth a thousand words. There’s a lot of debate out there as to whether the MRBS is really better than a Single-Row Bearing System (SRBS). I’m not sure how you could actually “prove” that this system is better. In my mind having more bearings would mean that there is a larger bearing surface for the blade to move on, that seems positive. Based on my experience, the knife is incredibly smooth and fires like a rocket, for these reasons MRBS gets a solid thumbs up from me.

Shirogorov Ne0n Pocket Dump

Shirogorov Ne0n Review – Final Thoughts

To conclude I don’t think I have hidden my opinion on the Shirogorov Neon Zero at all. I love this knife. It’s well made, capable, and looks extremely cool. If there was any critical flaw it’s simply that this is an expensive knife. They weigh in at $715, this puts them into the realm of a decent custom build or other high-end production brands like Rockstead. Is it worth it? Well, that’s going to be an individual determination. I feel like it is. Between the quality of manufacture and attention to detail, I can see the money in it. As with all things, your mileage may vary.

Shirogorov F3 on BladeHQ
Shirogorov F3
From: BladeHQ

Occasionally Shirogorov knives find their way to BladeHQ, and I recommend purchasing them there. They aren’t available on Amazon.

Filed Under: EDC Knives, Folding Knives, Gentleman's Folder, Shirogorov, Tactical Knives, Titanium Frame Lock Knives Tagged With: bearings, m390, Made in Russia, titanium

Shirogorov F3 Review

by Dan Jackson 5 Comments

Last Updated: July 27, 2019
The Shirogorov 95t is arguably the nicest knife I have reviewed to date. It is a beautiful piece embodying all the characteristics one would seek out in a high end titanium framelock flipper: top shelf materials, amazing action, a beautiful design, plenty of details, and an otherwordly level of machining, fit, and finish.

Shirogorov F3 Review
Buy the Shirogorov F3 at BladeHQ

The 95t was undoubtedly a sweet piece of steel, but like many high end knives in my collection it was eventually sold off to fund other purchases. I paid over $700 for the 95t, and at that price point I didn’t feel comfortable keeping the knife in my collection, let alone actually using it on a regular basis.

The 95t was almost too nice to use.

I noted in my 95t review that prices on these knives had dropped to what I thought was a reasonable level. Over the past year the secondary market prices on Shirogorov knives have continued to drop. While trolling the buy/sell/trade section of Bladeforums one evening I stumbled across the Shirorogov F3 that you see in this review. The price tag was around $500. It’s still big bucks for a pocket knife, but I couldn’t resist after letting the 95t go.

The F3 is the liner lock version of the 95. This G10-clad linerlock flipper seemed a little less ornamental than the 95t, and a touch more practical. I was excited to bring a Shirogorov back into the collection.

General Dimensions and Blade Details

The F3 has an overall length of 8.75″, a 3.875″ blade, weighs of 5.1 ounces, and is made in Russia. Some call the F3 the “Sebenza of Flippers”, and for good reason. I think the tolerances are on par with offerings from Chris Reeve Knives, and in some ways I think Shiro’s manufacturing prowess is superior.

In contrast to the 95t, this bead blasted and G-10 handled F3 feels more like a tool knife than a collectible. It lacks the ornamentation and detail of the 95t, but retains the elements of what makes a Shirogorov special. It is also executed with the same eerie precision of their more expensive knives.

Shirogorov F3 Blade

One element of contention for me is that despite this feeling like more of a user, it’s still a ridiculously large knife with its near 4″ blade. Most people won’t be able to carry and use this in public. Those that can carry a F3 will probably opt for something less expensive (or perhaps even a fixed blade). These knives are immaculate, but I wish they would also offer a flipper with a sub 3.5″ blade. A version with a 3″-3.25″ blade would probably do well here in the States.

The blade pattern of the F3 is identical to the 95t. It features the exact same drop point profile and geometry. The major difference lies in the finishing. My 95t had some subtle and interesting jimping on the spine. It also had a nice bright stonewashed finish. In contrast, my F3 has no jimping and a simple bead blasted finish. The matte blade compliments the olive drab handles nicely, and I haven’t had any problems with this working finish (no rust). That said, some F3s include jimping, and you may be able to find the knife with a different blade finish.

Shirogorov F3 Profile

My particular F3 comes with Elmax blade steel, but it’s important to note that Shirogorov has released the F3 in a number of different blade steels including S30V, S90V, Vanax 35, and even 440C.

Elmax is a high end steel with a good combination of edge retention, ease of sharpening, and corrosion resistance. The full flat grind of this knife gets thin behind the edge and the knife has no problem with breaking down packages, cleanly slicing through paper, etc. While most of these Shiros will sit on a shelf as a collectible due to their size and cost, these are fully functional knives. If you can carry a F3, then I think that it will make for a great user.

Handle, Ergonomics and Pocket Clip

The F3 features 3-D machined G10 handle scales over full titanium liners with a geared G10 backspacer and custom hardware. Like my 95t the fit and finish is excellent and there are plenty of details to enjoy. Every edge has been chamferred. The titanium liners have been tumbled to compliment the matte finished blade. The lanyard hole is inset into the backspacer rather than simply drilled through the entire body of the handle. The hardware is all precision machined.

Shirogorov F3

Speaking of hardware, if you decide to take the knife apart or adjust it use a coin wrapped in tape to avoid marring the slotted hardware. A regular flat-head screwdriver can wreak havoc on a Shirogorov.

The F3 is a comfortable knife thanks to its thick handle and simple shape. The 95t was a pretty comfy knife, but the addition of G10 scales takes the F3 to a different level as it helps fill the hand. The scales have been given a very light machined pattern and offer a little bit of traction. The simple handle shape will accommodate all sizes of hands. The pocket clip and backspacer are tucked out of the way to minimize hot spots. I won’t sit here and say I thrashed on this knife in the same way I have beat on some of my ~$100 knives, but I have used it for some extended cutting chores and it works well in hand.

Shirogorov F3 Ergonomics

The pocket clip is a 2-piece milled clip. It’s attractive, discrete, and functional. A cool feature is that they milled out a section under the pocket clip, so the clip has a low profile and it also easily slips in and out of the pocket without destroying your pants. The series of grooves milled onto the outer face of the clip is designed to grab your thumb and help remove the knife. That feature works well, and the knife is easy to retrieve. The clip has a strong spring that offers excellent retention. This is not a low-rider clip, but the F3 still buries discretely.

The F3 is a large knife, and the inclusion of G10 scales make it significantly fatter than the all titanium 95t. So you will feel this knife in the pocket a little more. Still, I found the F3 carried well considering. At 5.1 ounces the knife is still lightweight for its size, and the strong clip keeps the knife in place in your pocket.

Shirogorov F3 Pocket Clip

Deployment and Lockup

Shirogorov is known for producing fast firing flippers, and my F3 is no exception. The detent is tuned perfectly on this knife, and the blade fires crisply every single time with the blade locking open with a satisfying “snap”. My particular F3 is equipped with a single row of bearings, and the blade is capable of falling into the closed position simply by releasing the lock bar. It’s smooth. Since this is a liner lock, you never need to worry about your fingers contacting the lockbar and interfering with the flipper action like with a frame lock.

The F3 comes with a robust titanium liner lock. Don’t let the term “liner lock” turn you off if you are a framelock fanboy: this liner is actually thicker than some of the framelocks in my collection. My lock engages early and without any kind of play. If you look closely at the face of the lock you can see they included a stainless steel lock bar insert. There is no stickiness in the lock, and this is after flicking the knife open hundreds of times. The liner is also easy to disengage. This is arguably a “perfect” liner lock flipper.

Shirogorov F3 vs. Spyderco Paramilitary 2

Blade centering is perfect on my knife.

Shirogorov F3 Review – Final Thoughts

Just like the 95t, the F3 is a beautiful knife. I am a fan of pretty much every aspect of this knife. From design, to material selection, to execution, Shirogorov gets it all right. Given the price tag, that is what I expect.

If I were to find something to complain about with the F3, it would be the size. I don’t mind this being a larger knife, but would like to see it also offered in a smaller version. These days the trend is towards smaller more functional knives for urban carry, and I’d love to see Shirogorov jump on that bandwagon.

While I can’t promise this F3 will remain in my collection forever I think I will have a harder time letting it go than the 95t. I like the warmth of the G10 handles, but I also appreciate the more low-key and user-oriented approach to this F3.

Plus there are tons of full titanium framelock flippers on the market. Whether it’s the mid-techs coming out of the USA, high end Chinese framelock flippers, or higher end offerings from production companies like Spyderco and Zero Tolerance, the market is getting inundated with framelock flippers. There are relatively few high end liner lock flippers.

In closing, the Shirogorov F3 is a beautiful knife. If you have the cash and desire to check out a F3, then I can definitely recommend it.

Shirogorov F3 on BladeHQ
Shirogorov F3
From: BladeHQ

Occasionally Shirogorov knives find their way to BladeHQ, and I recommend purchasing them there. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Filed Under: Collectable Knives, Folding Knives, High End Pocket Knives, Shirogorov, Tactical Knives Tagged With: bearings, elmax, flipper, g10, Made in Russia

Shirogorov 95t Review

by Dan Jackson 12 Comments

I have had folks occasionally confess that they live vicariously through my reviews of high end pocket knives. I have handled some nice stuff over the years, but for the most part my wallet and I have been able to resist the renaissance of mid tech and custom knives. This is despite the deluge of eye candy on Instagram, which seems to suggest that everyone acquires $750+ knives and $100 titanium bottle openers at the same rate I buy a loaf of bread and some eggs at the grocery store. Well, I finally gave in, joined the masses, and grabbed this Shirogorov 95t.

Shirogorov 95T
Buy the Shirogorov 95t at BladeHQ

But this didn’t happen overnight. I have lusted after a Shirogorov for several years before eventually getting one. I actually had the chance to buy one directly from the maker at the 2014 Blade Show. I was one of the few to get their ticket called in their lottery. The problem was the knives started at $1,000+, which was more than I was willing to spend. I scored this gently used 95t off the forums while recording an episode of Gear Geeks Live.

For those unfamiliar with the maker, Shirogorov is a Russian knife company operated by the Shirogorov brothers. There isn’t a ton of info on the company (at least in English), but this is a growing manufacturer focusing on high end production and custom knives. They might be categorized as pioneers in the recent trend of high end production knives coming out of Russia and Asia. They are known for sleek designs, fanatical attention to detail, and exceptional fit and finish.

The 95 is one of their more popular models, and the 95t is a full titanium handled version with their signature “turtle” pattern (hence – a 95 “t”). This review has been a long time coming, and I’m pleased to finally be able to share some thoughts on this exclusive knife.

General Dimensions and Blade Details

The 95t has an overall length of 8.75″, a 3.75″ blade, and it weighs 5.2 ounces. This is a large knife, and is not well suited for my style of every day carry (EDC). To me this is more of a self defense knife or large utility knife. Given how expensive it is, it has largely remained a collectible for me, but I did carry and use it a little. Mostly for purposes of putting this review together.

The 95t’s drop point blade is about as simple of a shape as you can get. Just 3.75 inches of flat ground and lightly tumbled steel. Of course, the devil is in the details, and the 95t has some nice ones on its blade. The edges have been slightly chamferred up by the jimping and the plunge lines are very clean. I wasn’t able to examine the factory edge on this particular knife (the previous owner attempted to sharpen the knife on a [easyazon_link asin=”B006WRH198″ locale=”US” new_window=”default” nofollow=”default” tag=”brdfkdfk-20″ add_to_cart=”default” cloaking=”default” localization=”default” popups=”default”]Wicked Edge[/easyazon_link]), but as it stands it cuts very cleanly. The finish is very fine and the knife glides through cardboard.

Shirogorov 95T Blade

My 95t came with Elmax steel for the blade. Elmax is a higher end stainless steel by Bohler Uddeholm. Shirogorov offers the Model 95 with several other blade steels as well, including S30V. I’ll be the first to confess that this 95t has not been a real heavy “user” for me. First of all, at $700+ I have plenty of less expensive knives to beat up on, and secondly, with a near 4″ blade the 95t is well outside my normal range for daily carry – even on evenings and weekends when I’m not working in an office. I will say the 95t tracks through paper effortlessly, and opens boxes with the best of them. Anecdotally, the full flat grind and finely finished blade seemed to aid with slicing performance.

Handle, Egonomics, and Pocket Clip

The 95t has a full titanium handle. As previously mentioned, this particular model has Shirogorov’s signature “tortoise shell” design carved into it – hence the 95t. The handle really is a thing of beauty. The titanium has been masterfully milled. The edges are contoured and the single stand off is sunk into the titanium frame. There are a number of nice details to explore, from the “channel” behind the flipper tab for your finger to fall into, to the polished edges of the custom hardware. Speaking of custom hardware, while the slotted hardware is pretty, it easily mars if you try to adjust the pivot or remove the clip. The titanium itself has been given a thorough tumbling. This helps hide wear and contrasts nicely with the bright stainless blade and accents.

Shirogorov 95T Handle

The 95t is a large folding knife and it feels very good in hand. There are no sharp edges to speak of, save the cutting edge of course, and the simple handle shape allows your fingers to fall in place. There is a short run of jimping on the spine which reminds me a little of a Sebenza, but isn’t quite as sharp. The turtle pattern provides some additional traction without being overbearing, and the stonewashed titanium has a texture of its own. This simple handle will fit most people well.

Shirogorov 95T in Hand

The pocket clip is a 3-D machined piece of titanium, and is a miniature work of functional art in its own right. Drilled and tapped for right side tip up carry only, the clip compliments the lines of the knife. It also works well, affording secure and reasonably deep carry. The pommel just peeks out over your pocket when in place. The 95t is a large knife, but carries nicely considering. It has some heft to it, but isn’t over the top heavy. It carries well for its size.

Shirogorov 95T Pocket Clip

Deployment and Lockup

The 95t flips fantastically. While it isn’t as much of a rocket launcher as the Zero Tolerance 0454, it’s still a pretty damn good flipper. The action is crisp and the blade kicks open easily with the push of a finger. My particular knife runs on a single row bearing system, however, I know that Shirogorov also offers knives in a fabled multi row bearing system (MRBS). I have never handled one of their MRBS knives, so I can’t comment on that feature. I can say this single row bearing knife is very smooth. The blade shoots open and falls closed easily.

Shirogorov 95T Stand Off

For lockup we have a frame lock with a steel insert. Lockup is early and extremely solid. There is no play in any direction, and the lock is easy to disengage. Blade centering is perfect.

Shirogorov 95t Review – Final Thoughts

I have had the privilege of checking out some damn cool stuff over the years. So far I have largely resisted the temptation to venture in to mid tech and custom knife territory, but the Shirogorov was too hard for me to resist. I am very happy I got a chance to check this knife out. It’s beautiful and amazingly well executed. Every aspect of the knife has been meticulously considered, and the end result speaks for itself. This is one heck of a knife, and if you have the money and desire to own one, I do not think you will be disappointed.

Here is a shot of the 95T next to another beautiful knife, the Fantoni CUT Flipper:

Shirogorov 95T vs. Fantoni CUT Flipper

I won’t deny that this is an expensive piece. I am unsure what these retail for exactly, as they don’t stay on the retail market for long. I would guess anywhere from $750 to $1000. Either way you are paying a lot of money for this knife. So certainly this is not a knife anyone “needs”. I’ll never be able to answer for you whether it is “worth it”. Only you can make that decision. When I compare the 95t to a large Sebenza or a Hinderer XM-18, I think you are getting something more for your money. I’d have a hard time deciding between this and the ZT 0454, but I think the 95t is made just a little bit better.

I usually sell off many of the expensive knives that land in my collection. I’m not made of money and I need to do this to check out new stuff. I have been sitting on this 95t for at least 6 months now. I think the fact that I have stalled writing this review for so long says a lot. I am having a hard time letting it go, and just might convince myself to keep it. As someone who has had a lot of knives pass through his hands that’s about as glowing of an endorsement as I can offer.

Shirogorov 95t on BladeHQ
Shirogorov 95t
From: BladeHQ

Occasionally Shirogorov knives find their way to BladeHQ, and I recommend purchasing them there. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Filed Under: Collectable Knives, Folding Knives, High End Pocket Knives, Shirogorov, Tactical Knives, Titanium Frame Lock Knives Tagged With: bearings, elmax, Made in Russia

Primary Sidebar

Follow Us on FacebookFollow Us on TwitterFollow Us on YouTubeFollow Us on RSS

Subscribe to Email Updates and Never Miss a Review (No Spam)!

Enter your email address:

Delivered by FeedBurner

Shop BladeHQ

Shop Outdoor Gear on Amazon

Shop KniveShipFree.com

Search BladeReviews:

Best of BladeReviews:

Best EDC Knives
Best Survival Knives
Best Tactical Knives
Best High Value Knives

Copyright © 2025 · Log in