Benchmade

Benchmade 860 Bedlam Review

Last Updated: August 3, 2019
The original Benchmade Bedlam 8600 is an automatic knife released in early 2010. The knife received rave reviews across the community and this large, middle eastern inspired knife was quickly deemed to be a new Benchmade classic. However, the knife was only available as an automatic, which is totally sweet, yet not particularly practical because large automatic knives are illegal in lots of places without a military or police exception (plus there is just more stuff to break with an automatic knife).

Buy the Benchmade Bedlam at BladeHQ

Buy on Amazon

Thankfully, Benchmade understood that this knife was meant for the masses, and they recently released a non-automatic version, the Bedlam 860 that you see here. The 860 is very similar to the 8600. It’s a large blade that could be used defensively, but will probably be a collector’s item more than anything. Lets take a closer look at what makes the new Bedlam 860 tick.

General Dimensions and Blade Details

The Bedlam is a very big folding knife with a 3.95″ blade, an overall length of 9.71″ and a weight of 7.1 ounces. I know some guys have been talking about using the blade as an EDC, but the length and weight doesn’t make it practical to me. I find it more to be built as a self defense tool. The kind of specialty blade used by martial artists. Of course you could use this for whatever you want – as a collector I found it to be immensely appealing and have carried it as well.

The blade shape of this knife is very cool, and really distinct. People commonly refer to it as a trailing point blade or even a “Persian” style blade. While both of those names are accurate, in it’s place of origin this style of blade is commonly referred to as a “Jambiya”. The Jambiya is a traditional style of knife found in a lot of Middle Eastern countries. Jambiyas are also used as official Combat Knives for the country of Jordan, and it is rumored that the 860 was originally designed for the Prince of Jordan’s royal guard.

At any rate, the Bedlam has a large upswept blade with a thin swedge running along the top part of the blade and a hollow grind starting from about 3/4 of the way up. This is a nasty looking knife with plenty of attitude. If you study the tip you will notice that it is designed so that the last few millimeters of steel actually thickens as it reaches the very tip. This is known as a revere distal taper and provides extra strength for thrust cuts and stabbing. Even with the tapering it’s still a fairly delicate tip so I wouldn’t use it to pull nails or stab through cinder blocks.

The steel is 154CM which I have covered in a couple of my other Benchmade reviews. Suffice to say 154CM is a great all-around steel and was an excellent choice for the Bedlam. It sharpens easily, holds a great edge and is resistant to wear and corrosion. The entire blade is hit with Benchmade’s proprietary BK1 matte black coating. BK1 is a tough scratch resistant finish that is very resistant to corrosion. You also have the option of getting the knife in a plain (uncoated) satin finish. To me the knife looks a little naked without the coating, but it’s all a matter of personal preference.

Handle, Ergonomics and Pocket Clip

The handle of this knife is made of 2 large pieces of sculpted G10 over full stainless steel liners. The G10 scales are wonderfully sculpted and have been given an interesting tiger stripe like pattern. Underneath the liners (along with the rest of the hardware) has been given a flat black finish. The liners are partially milled out to reduce weight and place the balance point right in the middle of the second choil. There is a partial backspacer made of some sort of resin, and a stainless steel pommel that could serve as a glass-breaker or non-lethal impact device. The handle is screwed together so you could take it apart for cleaning and maintenance. Everything is secure, well aligned and totally flush.

From an ergonomics standpoint, the 860 is quite nice. You would expect a knife of this size to feel good in hand and the Bedlam does not disappoint. What interested me is the variety of grips. the two choils allow you to either choke up or sit back on the knife and really extend your reach. There is a good amount of jiming on the thumb ramp, first choil, and the pommel so the knife feels very secure. The G10 has a low to medium amount of traction to it, but given the overall size of the knife and it’s handle features, I feel very comfortable wielding this blade.

The pocket clip is given a black finish and allows for reversible tip up carry. It’s a pretty deep carry, but not super deep. Clip retention is fairly weak, which makes it easy to insert and retrieve from the pocket, but it also increases the chance of the knife falling out. It’s a delicate balance, but I do like the ease of retrieval.

As far as overall carry goes, this is a large 7 ounce knife, so you would expect to notice it. I actually found the Bedlam to carry well, and liken it to a larger tactical flashlight. Compared with the other big knives I’ve carried (like the Cold Steel Spartan and ZT 0300) the Bedlam carried very well.

Deployment and Lock

While the deployment of the 860 Bedlam isn’t as fast as the 8600 Bedlam, it is still very good. The big black blade really sings with just a flick of a thumb stud and it locks in place with authority. The ambidextrous thumb studs are big and easy to get at. There are phosphor bronze washers in this knife, so you can expect a nice smooth deployment every single time.

The axis lock is the same used in the 8600, and it was a great choice for the 860. This is a strong lock that is easy to use with one hand and is fully ambidextrous. At first, I noticed zero blade play with this knife – everything was very snug as you would expect from a Benchmade. Over time I found that the pivot loosened up a little and I started to experience some side-to-side blade play. This is pretty normal for a lot of folding knives (and not the first time this has happened with an axis-lock blade). What I did was apply some blue lock-tite to the pivot screw. This fixed the problem completely and I haven’t had issue with blade play since.

Benchmade 860 Bedlam Review – Final Thoughts

What can I say? If you are all into the Bedlam then I am here to confirm that this is a sweet knife. A big, USA made knife with rock solid construction, great materials and it looks really cool. There is a lot to like with the Bedlam. The real question is whether this is something you can get away with carrying. For some I know this will mostly be a novelty or collectible. Others might buy it with an eye towards use as a utility and self defense blade.

If you like the looks and have room in your collection, then the Bedlam is a well made knife worthy of your consideration.

Benchmade - Bedlam 860 Knife, Scimitar Blade, Serrated Edge, Coated Finish, Black Handle

HIGH-QUALITY: The 154CM stainless steel blade is tough, rust resistant, and holds an edge well. The G10 handle is durable and stable enough for a wide range of temperatures, making it ideal for tactical use.
WELL-DESIGNED: Benchmade's AXIS lock is exceptionally strong and fully ambidextrous. The Bedlam 860 is a manual knife that can be opened and closed single-handedly.
COMFORTABLE: The 860 is large yet is one of the most comfortable knives to handle. The reversible pocket clip offers ultimate accessibility.
FOR TACTICAL USE: The Bedlam 860's curved blade style is inspired by scimitar swords, which were used for military defense. This modern version is good for slashing and is designed for tactical applications.

I recommend purchasing the Bedlam at Amazon or BladeHQ.

Benchmade 741 Onslaught Review

by Dan Jackson 9 Comments

Last Updated: August 21, 2019
Once in a while you run into a knife that really blows you away. The Benchmade 741 Onslaught is certainly one of those breathtaking knives for me. Designed by the late Bob Lum, the Onslaught is a large and elegant folding tactical knife that speaks to me on a lot of levels.

Buy the Benchmade Onslaught at BladeHQ

Buy on Amazon

General Dimensions and Blade Steel

Make no mistake, the Onslaught is a big knife. The blade alone is 4.3″, the overall length is 9.63″ and the weight is 6.8 ounces. Yeah, this is a big knife and I wouldn’t use it for EDC. I would prefer to use a Benchmade 746 Mini Onslaught with a 3.45″ blade, an overall length of 7.8″ and a weight 3.9 ounces. The “mini” is still a pretty big knife, but I find it much more practical for daily carry. That said, the full size Onslaught could make for a very deadly defensive/tactical knife, or a high end user.

In reality, I think many of the people who buy the 741 will buy it as a collectors piece. They may be fans of Bob Lum or simply like the look (it’s pretty wicked looking). There is nothing wrong with that. When you drop $150+ on an elegant folding knife like this, you are probably not going to immediately take it to the backyard to thump on some 2x4s. This is the kind of knife you could pass on to your kids, and who knows, if Benchmade decides to discontinue the model or ship production overseas, it may even be a little bit of an investment down the road.

Anyhow, lets talk about the blade. The 741 Onslaught has a big, up-swept modified clip point blade. There is plenty of belly on this knife, and it looks like this would be a decent skinner. There is a long swedge that terminates with a very delicate tip. For such a big knife the tip is almost comically thin. In fact, the entire blade is made from pretty thin stock. I would prefer if they made it slightly thicker. I think this would improve the strength and utility of the knife as I would be very cautious with putting this knife in any kind of hard use role.

Further adding to the delicate nature of the blade is the almost full flat grind. The slicing ability of this knife is incredible and the long thin blade will shave off material with ease, but this is all done at the expense of blade strength. My blade came with a lightly stonewashed finish, but you also have the option of a black coated blade as well.

Blade steel on this knife is tried and true Benchmade 154CM. 154CM is a hearty steel that takes a great edge and holds it well. The 154CM can be somewhat prone to rust so keep the knife clean and dry to ensure it will stay beautiful.

Handle and Pocket Clip

The handle is made of large pieces of G10. The G10 has a relatively smooth finish and it isn’t particularly grippy but the handles are so large it doesn’t really matter and the result is you have a beautiful knife. Under the G10 scales are full stainless steel liners. These liners have been blackened and are skeletonized in effort to reduce the weight. Everything is screwed together with attractive black chromed hardware and a large black backspacer runs most the length of the handle.

As far as ergonomics are concerned the handle is fairly comfortable. The handle material doesn’t have a high traction finish, instead relying on larger design elements to hold your fingers in place. The choil and sweep of the handle have a way of wedging your hand in place. This provides a firm grip and is still pretty comfortable for my larger hands. If I choke up a little more on the knife it’s much more comfortable and allows me to better control the big blade. There is no jimping to be found on this knife, which doesn’t bother me because of the overall size, but for such a big knife I felt the ergonomics to be decent, but not outstanding.

The pocket clip on the Onslaught is rather large, which compliments the overall size of the knife. It is made of blackened nickle and allows for right side tip up carry. It is designed to support a lot of weight and balances the knife well in your pocket. I like the chrome finish Tip up carry is preferred for quickly deploying folding pocket knives so I am not complaining that Benchmade didn’t leave an option for tip down. The nickle pocket clip fits well with the overall elegant nature of the knife.

Deployment and Lock

For a big knife the Benchmade Onslaught moves fast. There is a large thumb hole that provides enough room to snap the blade out with or without gloves. The G10 scales have been machined to open up access to the thumb hole. Even though the thumb hole is partially occluded by the handle it is still easy to get at.

The Onslaught uses the Benchmade Axis lock. This is a great lock and has been proven time and time again with Benchmade’s other offerings. The Axis Lock in the Onslaught is very smooth and when the blade is locked open there is zero play in the knife. When the blade is closed it is centered in the middle of the handle, another small detail that I’ve come to expect from Benchmade.

Benchmade 741 Onslaught Review – Final Thoughts

The Onslaught is a beautiful knife with amazing build quality and great attention to detail. As a working mans knife you could find some faults with the design, but I suspect that Benchmade had the collector in mind when they built this blade. Practical weaknesses would include a relatively thin tip and a low traction handle, but the end product would still make a serviceable weapon and a beautiful heirloom. All in all I like the full size Onslaught a lot, but for every day carry, and even tactical use I would reach for the “mini” version.

Benchmade 741 Lum Onslaught Folding Knife Plain Edge

Axis Lock Bob Lums first
154 CM
Big Awesome Folding Knife
Reversible pocket clip

I recommend purchasing the Benchmade Onslaught at Amazon or BladeHQ. Thanks for reading.

Benchmade 950 Rift Review

by Dan Jackson 16 Comments

Last Updated: July 28, 2019
Ah, the Benchmade 950 Rift. What a sweet piece of steel. The Rift originally came out in 2008 as part of Benchmade’s “black class” which are designed to be military and police grade blades built for extreme duty. Designed by famed knifemaker Warren Osborne, the 950 Rift certainly is extreme and it took the knife world by storm gaining critical acclaim by reviewers and enthusiasts alike.

Buy the Benchmade Rift at BladeHQ

Buy on Amazon

Today the 950 Rift is still available with it’s very distinct reverse tanto blade and is available in a variety of configurations; including the ultra cool black and gray G10 handled version shown here. I would say that this knife is appealing as a large EDC knife, a small emergency defense knife, or even a collectors item. Lets take a closer look at this unique and exciting knife.

General Dimensions and Blade Details

The Osborne 950 Rift is a fairly big folding EDC knife with a 3.7″ blade, a total length of 8.27″ and a weight of 4.8 ounces. The weight is perhaps one of my biggest criticisms, but really that is me grasping for straws. If you don’t like heavier knives then this won’t be the folder for you, but many, myself included, enjoy carrying a larger knife and the weight won’t be an issue. For a lighter Benchmade with about the same length, consider the Benchmade Griptilian.

As I mentioned before, the blade shape is classified as a “reverse tanto” which gives the knife excellent tip strength and the large sweeping belly of a drop point blade. I love the way this blade looks and it’s a super practical design for tactical and utility work. The blade is given a nice flat grind making it a very good slicer.

You have the option of getting the blade in a satin, blasted, or coated finish (blasted shown here). I really like the look of the coated version, Benchmade’s coating is very tough and I think the black blade with black hardware is a handsome combo.

The blade material is 154CM, a stainless steel that Benchmade uses in a lot of their knives. Benchmade knows how to heat treat 154CM and I think it was an excellent choice for the Rift. 154CM is a very durable steel that holds an edge very well and is easy to sharpen. In my experience corrosion resistance is very good but 154CM will rust if left in a damp environment so it’s important to keep the blade clean and to cover it with oil if you live in a humid area (I have no problems in South and Central FL).

Handle Ergonomics and Pocket Clip

The handle of the 950 is arguably cooler than the blade itself, which is a pretty tough feat considering. The handle scales are made of sculpted G10. My G10 came in layered black and dark gray, but you can also get black G10. The Rift has full stainless steel liners that, like the rest of the hardware, has been blackened. I wish Benchmade skeletonized these scales as I think they could really drop some weight off this knife. But all in all, the handle construction is very solid and I love the look of the scales.

The ergonomics on the Rift are pretty good. It’s a large and comfortable handle and I really like the way the butt end has been formed – it creates a good “catch” for your pinky and really lets you get some leverage on the blade. There isn’t a ton of jimping, which will turn off some. For me, I don’t mind the absence of jimping and actually prefer that in a work knife. I know some people say that there are some rough edges that they needed to sand down on the handle. If you plan on using the knife for heavy carving, then you may very well want a thicker knife.

The clip of the 950 Rift is Benchmade’s classic “arrow” clip and is among my favorite pocket clip designs. I like the blackened clip, it really helps with concealing the knife in your pocket. The clip will wear, but it wears gracefully and in my opinion, is one of those clips that gets cooler with use. Retention is great and the clip is mounted so that it rides low in the pocket. Benchmade tapped the handles so you have the option of tip up ambidextrous carry.

Deployment and Lock

Deployment on the Rift is very nice. As you would expect on any Benchmade knife, the Rift uses high quality, low friction, phosphor bronze bushings. The bushings are combined with large ambidextrous thumb studs to deploy the Rift’s blade quickly and easily. I really like the thumb studs, there are nicely milled out, have a unique design and have been either anodized or given a DLC coating – it’s been very durable and hasn’t rubbed off at all after a LOT of opening.

As you can see in the pictures, the Rift uses Benchmade’s Axis Lock. For those unfamiliar with the Axis Lock, is is a very intelligently designed lock that Benchmade uses on a lot of their knives. It is very strong and very easy to use ambidextrously. I love the axis lock, it’s among my favorites because it is so smooth reliable and easy to use. One hand opening and closing with this knife is a breeze.

Benchmade 950 Rift Review – Final Thoughts

Well, what is there to say? The combination of great blade design, 154CM steel, G10 handle, and reliable Axis lock mean there is a lot going for this knife. If you are in the market for a larger EDC knife or a folding tactical knife, the 950 Rift has a lot to offer. Build quality is very sturdy, the knife cuts well, it’s comfortable in hand, and 154CM steel is very serviceable. I also like the fact that the Rift is made in the USA.

As far as potential negatives are concerned, my main gripe is the weight of the knife. This is a bigger offering from Benchmade, and you definitely feel that in hand and in pocket. This may not be an issue for some, but for folks that appreciate a lightweight EDC knife, I might recommend the Benchmade 940 or Griptilian instead. I think Benchmade could have mitigated this slightly by drilling holes in the thick steel liners.

If size and weight aren’t a terrible concern, and you want a reliable and well made work or tactical knife, then the Rift could be an excellent choice.

Benchmade Osbourne Design Rift Knife with Black G10 Handle and AXIS Lock

Blade Length: 3.67-Inch
Overall Length/Closed Length: 8.27-Inch/4.60-Inch
Blade Material/Hardness: 154CM Stainless Steel/58-61HRC
Blade Style: Reverse Tanto, Ambidextrous Thumb-Studs
This item is not for sale in some specific zip codes

I recommend purchasing the Benchmade Rift from Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.