Travis Pike

Emerson La Griffe Review

The La Griffe, which apparently means ‘the claw’ in French, is designed by Fred Perrin and produced by Emerson. Fred Perrin is a French SpecOps veteran and martial arts practitioner who also designs knives on the side. Most of his designs are more or less designed to be weapons and his designs come from a martial arts background.

Buy the Emerson La Griffe at BladeHQ

Buy on Amazon

The La Griffe is really no different. It’s a short blade, with a short handle not necessarily designed for EDC tasks. Of course, a knife is a tool and is adaptable. Emerson makes a La Griffe called the White Water with an all serrated edge. As a kayaker, I can certainly see why one would want the finger hole for a good grip while on the water. I use the Gerber Remix as my kayak knife and it has a similar finger hole.

While it can be pressed into other tasks the La Griffe is a small, easily concealed weapon that most of us could find a way to carry with ease.

General Dimensions and Blade Details

The La Griffe sports a short 1.75-inch blade that blends into a 3.125-inch handle for a total length of 4.875 inches. It weighs only 1.5 ounces and is .125 inches thick. The knife is made from 154 CM steel that seems to be a favorite of Emerson and a good all-around knife steel.

It can get quite sharp, isn’t terribly difficult to sharpen, holds a decent edge and is very strong. Additionally, it’s corrosion-resistant which is an important feature if you are wearing it concealed against the body where it can be exposed to sweat.

Another Emerson calling card is the use of a chisel grind blade. That makes this a rough cutter for fine work but does make it easy to sharpen and supposedly it’s a stronger edge. As a knife designed to be a weapon, the chisel grind makes sense. It doesn’t need to be an edge designed for super fine and controllable cuts. It does need to be strong though, and being easy to sharpen is another excellent benefit.

The blade also comes in a stonewashed or black cerakoted finish. Mine, as you can see, is the stonewashed variant. The black cerakote adds a layer of additional protection and would likely be less eye-catching if accidentally exposed while being concealed.

The short blade and handle, as well as the relativeness thinness of the entire package, limits the scope of use for the knife. When a knife is purpose-built to be a small weapon it’s difficult to put it in play for other tasks.

Handle and Ergonomics

The handle is very thin and is designed to be easy to conceal. The downside to this is that it’s not extremely comfortable for heavy use or work. It’s very short as well and offers little leverage. It seems to be best suited for quick stabs and slashes.

The finger hole ensures the knife stays put. This is a must-have because the handle is so short and smooth. Without it gaining a grip on this knife would be near impossible. The handle does conform to the hands though. The curve in the middle goes around the middle finger and leverages out over the ring finger.

Overall it’s comfortable to hold, but it’s not going to be a heavy-duty worker. Splitting cardboard boxes quickly makes your hands tired. Fatigue and pain set in around the finger ring as well. I attempted to use the knife to help cut USPSA targets from sheets of cardboard and found the knife difficult to control.

The short and thin handle does make the knife easy and comfortable to conceal. It can be worn as a neck knife, or you can purchase an IWB loop as I did. The knife disappears and is invisible under a t-shirt.

Sheath

The included sheath is very simple and made from kydex. It covers the blade perfectly and locks in on the front portion of the finger ring. A distinct snap is heard as the knife locks in and its held in very tight. The majority of the finger ring is left exposed and you can easily fit your finger in and draw the knife.

The sheath also offers plenty of places to add accessories through the six holes that run from the top to the bottom. Plenty of places to add an IWB loop or necklace for carrying. The sheath is naturally ambidextrous and also very lightweight and thin. It won’t add much bulk if concealment is your goal.

Emerson La Griffe Review – Final Thoughts

The La Griffe by Fred Perrin and Emerson certainly succeeds as an easy to carry knife. It’s a vicious little tool that’s sharp enough to cut deeply. In a pinch, it would appear to be an excellent defensive weapon. Something you can use to cause injury, make space, and escape from an attacker. The simple design makes it impossible to drop and very difficult to have it taken from you.

My advice would be to purchase the knife if you want something easy and lightweight to carry as a defensive weapon. If you are looking for a standard EDC knife I’d look elsewhere. That’s not an insult to the La Griffe, just a reality-based observation. The La Griffe is easier to carry than most knives, especially for women who may not have actual pockets on their clothing. The La Griffe is well built and fearsome, and that’s what a defensive weapon should be.

Emerson La Griffe Neck Knife with Satin Blade

I recommend purchasing the Emerson La Griffe at Amazon or BladeHQ. Thanks for checking out the review.

Cold Steel Hide Out Review

by Travis Pike 3 Comments

You can’t not love Cold Steel. They make some odd, but often innovative knives, as well as super fun and cheesy videos. I never needed a Gladius machete but damn do I want one. Today we are going small, super small, and looking at Cold Steel’s Hide Out. The Hide Out is an ultra small neck knife designed as a last ditch weapon.

Buy the Cold Steel Hide Out at BladeHQ

Buy on Amazon

The Cold Steel Hide Out is designed for discreet carry. It’s easily worn and carried around the neck, or with an added loop it can be carried in an IWB position. The knife is inexpensive, and super lightweight. It’s also a formidable knife should you find yourself in a last ditch scenario. The Hide Out is my go to knife when I go for a run because it’s easy to carry and easy to use.

General Dimensions and Blade Details

The Hide Out has a 3 inch blade and a 3.5 inch handle for a knife that’s 6.5 inches long total. The Hide Out weighs a mere 1.9 ounces. The knife is made from Japanese AUS 8A stainless steel, and has a Kray Ex handle.

AUS 8A steel is an affordable steel that is certainly well suited for the Hide Out. AUS 8A is a heat treated steel, and it has excellent corrosion resistance. This is a must have since the knife sits against my sweating chest as I run. The steel itself is also very quick and easy to sharpen, but the downside is it will dull somewhat quickly. The steel itself is reported to be very strong and I have no reasons to think it isn’t.

The blade is a dagger design that ends with a sharp spear point. The blade is a V-grind and is quite attractive and evenly ground. The blade is extremely sharp from the factory and keeping the edge sharp is easy to do. Integrated right below the blade is a very small handguard. In a traditional fencing grip it’s not very useful, but it’s incredibly handy in an ice pick style grip.

The Hide Out is not designed as a working man’s knife and not exactly a tool designed for EDC. It’s a weapon designed for concealed carry. A dagger style blade also means its designed more for stabbing that slicing or cutting. That being said the handguard also acts as a point of leverage for your thumb and you can slice through most common materials if necessary.

The Hide Out is super simple and from a last ditch self-defense perspective that is all it needs to be. The blade is short enough to make it easy to handle and to make repeated stabs easy. The blade is pointy and sharp and needs no special techniques to use. Just point the stabby end at the bad guy and thrust it. It will most certainly get the point across.

Handle and Ergonomics

The handle is very thin, but long enough to fill your hand. The handle flares outward near the bottom and the Kray Ex coating makes it easy to grip and allows the user to easily draw the knife from a neck worn sheath. The long handle gives you an outstanding grip on the knife.

The handle is merely coated with Kray Ex, and the knife does have a full tang. Kray Ex rubber is a Cold Steel material they use for their grips. It’s soft and comfortable, but also heavily textured to provide a solid grip on the knife.

As I mentioned before the grip is exceptionally thin, but it’s easy to hold onto. It’s a valuable thing to have for a knife designed for self-protection. The handle’s Kray Ex coating makes it easy to grip, especially when it comes to wet and sweaty hands.

I’ve never needed to use it for actual self-defense, but I’ve practiced with it during runs and I’ve always been able to draw it without issue. The knife’s design means regardless of which side you grab it’s positioned for use and for an easy grab. Perfect for a defensive situation where there is no time to think about which way you are grabbing the knife.

Manipulating the Hide Out and cutting through cardboard was surprisingly easy to do. The handle gives you a lot of leverage and you can control the blade with very little effort. The handle is also very thin and it will wear on your hand while you work with the knife.

Sheath

The Hide Out sheath is molded kydex and is called Secure-Ex. The Secure-Ex sheath offers excellent retention for the Hide Out. It has four points of retention. Two on the front and two on the back. The blade is absolutely not coming out of the sheath without a sure tug.

The sheath is made from two polymer molded halves that are held together with 8 eyelets. These eyelets allow you to position your chain higher or lower for an easier reach depending on your size. I like to position it low enough for easy and quick access.

There are also four wider slots to weave webbing through if you so decide. Overall the sheath is top notch and it’s perfect for low profile carry. It seals the knife in and ensures it going nowhere even when being worn from the neck upside down.

Cold Steel Hide Out Review – Final Thoughts

The Hide Out is a super small, and affordable neck knife designed for concealed carry. It’s extremely convenient for daily carry and comfortable as well. As a design it’s simplicity makes it effective to employ and very easy to carry. The Cold Steel Hide Out retails for under 40 bucks and serves a niche purpose.

The Hide Out isn’t a good EDC knife and basically any mid-tier folder would be a better choice. The Hide Out is perfect for situations where your dress or activity doesn’t allow you to carry a traditional knife. It’s a neat design and as a weapon it serves its purpose. If you need a do it all knife choose something else, if you need a light and easy to carry weapon then the Hide Out is for you.

Sale

Cold Steel 49NDEZ Hide Out Blade Knife, Black/Silver

Product Type: Knife
Unit Count : 1.0
No batteries required
Made in China

Editor: I recommend purchasing the Cold Steel Hide Out from Amazon or BladeHQ. Thanks for reading.

Emerson Mini Commander Review

by Travis Pike 1 Comment

The Mini-Commander is my third Emerson folder and third in the line of CQC knives. I guess I’m an Emerson collector. I initially purchased a CQC-7BW during my Marine Corps days, then I purchased a Mini CQC-15 that I thought combined a cool tanto edge and a good belly to replace the 7. Now I have a Mini-Commander that I purchased for no real reason.

Buy the Mini Commander at BladeHQ

Buy on Amazon

Of course, it’s been serving as my EDC for several months now because you don’t buy a knife like this and not carry it. It’s a knife designed for guys and gals in the military as well as those who typically work in non-permissive environments, and its in a handier size. The Mini-Commander isn’t for everyone, and its combination of features do make it more or less suited for a niche group of users.

General Dimensions and Blade Details

The Mini-Commander loses half an inch of the blade from the standard Commander model and has a 3.4-inch blade with a deployed length of 8 inches. The Mini-Commander’s blade is .125 inches thick and is made from 154CM. The handle is 4.6 inches long and the knife weighs 4.5 ounces.

It’s a convenient and easy knife to pocket carry. The Mini-Commander features a recurve blade design that sports a very prominent belly. You get a lot of cutting edge in a very compact package. It’s got a standard drop point tip and has a black cerakote finish. A stonewash finish is also available.

The use of 154 CM is pretty standard with Emerson knives and a great overall steel. It’s an excellent compromise of features and specs, but also makes an outstanding metal if you deploy to harsh conditions with your knife. Soldiers, Marines, Sailors, wildland firefighters, Border Patrol, etc.

154 CM is very corrosion resistant, and it is tough steel. It’s relatively easy to sharpen and can get quite sharp. 154 CM steel seems to be excellent steel when paired with a chisel grind. A chisel grind is quick and easy to sharpen, something I appreciated with the CQC-7BW when I was in the field and deployed.

You can get a good sharp edge with minimal tools and effort. The blade will also last. A chisel grind is a strong grind and when combined with a strong steel it makes a very dependable knife. When logistics suck you want something you won’t need to replace.

A chisel grind is great for most things, but don’t expect super smooth cuts. It has some grind to it while cutting. While it does cut, it doesn’t give me that tactile satisfaction I get from a super smooth cut. The belly of this blade makes it a great slasher.

The CQC knives and Emerson knives, in general, are designed to be weapons and EDC tools. I’ve never used a knife as a weapon, and likely never will. However, the belly on this knife would deliver deep, penetrating slashes in such an encounter. From my purposes, it’s perfect for cleaning game or cutting apples up for my kid’s basketball team. I do suggest washing the knife in-between those activities.

Handle, Ergonomics, and Pocket Clip

The handle is designed to fully fit the hand and it does well. The handle curves slightly forward, reinforcing the blade’s slashing design. The grips are made from G10 material and its heavily textured for comfort and control. The finger guard is deep and ensures nothing will slip and cause an accident.

The rear of the grip has jimping on both the handle and blade. It’s quite a bit and the thumb feels comforting pushing on it. Combined with the deep fingerguard and you’ll have a hard time losing your grip. If you do the grip does have a lanyard hole to ensure you really can’t lose this knife.

The grip is very comfortable and the grip design is well suited for slashing and slicing.

The pocket clip is nice and robust, very durable and it clings to your pants well. It’s certainly strong and well made. As a reader and commenter pointed out in my Mini 15 review the knife is only tapped for right-handed use.

Left-handed models exist and a right-handed model can be tapped for left-hand carry but that costs money. However, for the price of this knife, it should be ambidextrous. Most of the knife is ambi so a left-handed clip option should be standard.

Deployment and Lockup

This model features the Wave opening system. This allows you to open the knife as you remove it from your pocket. It’s neat, and if you were about to get into a fight its faster than an auto knife. However, it takes practice to learn.

In addition to the wave feature you have a thumb disk that is ambidextrous and easy to use. A flick of the wrist and thumb will send the blade flying out and locking reliably with just the thumb disk. This takes time and a little wear. The blade is initially tight and opens slowly but over time mine has become easy to flick open with the thumb stud.

The lock is made from titanium and its slightly jimped for an easy push release. What’s interesting is that my Mini 15 seems to lock up all over the place. The Mini-Commander locks up in the same spot every time regardless of how fast or slow I open it.

The lock is nice and tight and hasn’t let me down yet. Titanium may wear with time but it seems like little pressure or force is exerted over this lock so I doubt we are going to see many issues. I still haven’t seen any of the CQC-7 I’ve owned for years.

Emerson Mini-Commander Review – Final Thoughts

This is an expensive knife, with the price being close to 200 dollars. There are admittedly knives out there at that price that cut smoother, are thinner, and have left handed pocket clip options. However, the Mini-Commander’s combination of features does fill a certain role in the military and frontier world.

It’s nice to have a traditional point with a deep belly for slicing when fall deer season comes around and for tasks with a bigger cutting emphasis. It’s better for EDC than the CQC-7 and the mini designation makes it more comfortable than the standard Commander.

It’s a rock solid and well-made knife and it joins what appears to be my ever growing Emerson Collection with its own rightful place.

Emerson Mini Commander SF Plain Stonewashed Blade

Editor: I recommend purchasing the Emerson Mini-Commander at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

The ESEE Expat Libertariat Mini Machete Review

by Travis Pike 8 Comments

I’m a big fan of ESEE knives. They tend to be strong, well made, and designed to last. On top of that their knives tend to be very affordable and very simply made. Their target audience is often the outdoorsman, the hunter, the prepper, and general adventurer. The Expat line is a specialty line of knives designed outside of the typical ESEE crew.

Buy the ESEE Libertariat at BladeHQ

Buy on Amazon

I’ve previously reviewed the Expat Cleaver and I was a big fan. The second Expat blade is the Libertariat, which is a compact machete designed for a few different purposes. This is a blade that is lightweight, easy to use, and can be used for a variety of purpose outside of hacking down a path.

General Dimensions and Blade Details

The ESEE Libertariat has a 9-inch blade and an overall length of 14 inches. The blade is two inches wide and .12 inches thick. The handle is 5 inches long and 1.125 inches thick and made from wood. The Libertariat ways 13.08 ounces and comes with a canvas sheath.

It’s a very small, but also a very lightweight knife. The Libertariat doesn’t have a lot of weight to it, but it can still handle underbrush, vines, and limbs. I’ve even cut down some small trees without issue. The Liberariat lacks a point and is cleaver like. The lack of a point has never been an issue in my use of this tool.

The blade is made from SAE 1075 steel. It can get very sharp and is a good hard and tough steel. It can take a real beating when used as a machete is intended to be used. Of course, it doesn’t hold that edge for a long period. I find myself touching it up before any kind of daily use or yard work.

The blade has a Condor classic finish. This is a hammered finish that gives it the appearance of a tool built a long time ago. While it’s stylish its also effective, I rarely apply oil even though I live on the coast, and have yet to see rust.

As I mentioned this small machete is designed more or less as a bush tool more than a yard working machete. It can serve as a machete, as well as a general survival knife. It’s small and handy and could be used to clean game in a pinch.

The spine is a flat 90-degree surface that makes it easy to strike a ferrous rod with. The flat surface also makes it easy to baton wood into pieces if needed. I ‘ve batoned several pieces of pine wood without a problem. The hole at the tip of the blade allows the insertion of a rod to make what is basically a draw knife from this mini machete.

The Little Libertariat can do it all, or at least try to. Most importantly it’s an impressive machete. It chops and slices without issue and chew through some seriously thick material. As a small blade with little heft, you really have to know how to work a machete. Even an expert is going to expend more energy using the short and light Libertariat than a standard machete though.

With such a small blade you are using more energy, and losing reach causing you to bend over a bit to reach ground level. That’s the price to pay for a smaller, lighter, and handier machete.

Handle and Ergonomics

The handle is made from wood and very smooth. In over a year’s worth of use I’ve never felt it slip from my hands, but I would see why some would want some form of checkering. I also haven’t developed hot spots when using the Libertariat heavily.

However, I did notice after one long day my hand got quite tired of handling it. The small handle requires a tight hold and that will cause fatigue to set in quicker than a full, thick, hand-conforming handle.

The angle of the handle is perfect for machete work. It tilts the blade slightly forward and gives you an angle that maximizes your swing. This makes your swing more natural when you use a proper technique or flicking the wrist prior to contact you’ll use less energy and cut deeper.

The Sheath

The sheath is very simple and made from a khaki colored canvas. It feels quite strong and very durable. Four metal snaps run along the seam of the sheath and hold it all together should the stitching rip or fail, or become cut all to hell from inserting and removing the machete over and over.

There seem to be two styles on the market. One that leaves most of the handle exposed and then mine which covers a good portion of the handle.

With mine the sheath covers the majority of the handle and drawing the Libertariat is not a fast endeavor. I have to pinch, pull, then grip the handle properly. I see why some of the newer models come with a sheath that allows a full grip.

A small thong secures around the handle and keeps the machete in the sheath. It attaches the belt through a loop and that is really all she wrote. It’s simple, but it works.

The ESEE Expat Libertariat Mini Machete Review – Final Thoughts

The Libertariat can do everything a bigger machete can do… with a lot more effort anyway. Its small size makes it easy to use for a variety of tasks outside of just hacking and slashing brush. It’s very light and would be a great camp tool, or for a hiker looking to cut pounds.

For the price, it is hard to go wrong. Plus ESEE backs it with their lifetime, no questions asked warranty. The Libertariat is a potent little tool that will serve you well for a long time.

ESEE ESLIB-BRK Expat Libertariat Machete Knife, Black, 9 in

90 degree spine for Ferro rod Use
Draw knife Hole in blade
Condor edge
A lightweight tropical survival knife
Care instructions: Hand Wash

I recommend purchasing the ESEE Expat Libertariat at Amazon or BladeHQ. Thank you very much.

Emerson Mini CQC-15 Review

by Travis Pike 4 Comments

The Emerson CQC line of folding tactical knives are downright legendary. Mr. Emerson’s knives were the first folding tactical knives and are common to see among the armed forces, with police, and of course average Joes like me. CQC stands for ‘close quarters combat,’ and these knives are designed to be used as weapons as well as useful EDC tools. This particular model is the Mini CQC-15.

Buy the Mini CQC-15 at BladeHQ

Buy on Amazon

The Mini CQC-15 is a compact option that retains the legendary quality and reliability of Emerson’s knives. The CQC series is quite expansive these days, and the knives come in various sizes, colors, and configuration. The Mini CQC 15 is a hybrid of the two most popular knives in the CQC line, the Commander and the CQC-7.

General Dimensions and Blade Details

The Mini CQC-15 is smaller than the CQC 15, but it isn’t a small knife by any means. It’s an average size EDC knife with a 3.5-inch blade. The overall length with the blade deployed is 7.9 inches, and total weight is light 4 ounces. The blade is .125 inches thick and is made from 154 CM.

The Mini CQC 15 sports the piercing tanto point of the famed CQC-7B and the recurve blade of the Commander. This odd combination does give you a versatile knife blade that stabs and slices easily. The belly isn’t as prominent as the Commander, but it’s still enough to make it a good choice for skinning deer. You also get that extra cutting edge in a shorter profile. The tanto blade is, of course, a great piercer. If used as a weapon in a military scenario it will make quick work of clothing, web gear, or uniform shirts.

The blade is made from a durable and corrosion resistant 154 CM steel. Its Emerson’s steel of choice for these knives and is a good steel for these knives in particular. It’s tough, but not hard to sharpen. The blade is a chisel grind which has some strengths, but also weaknesses. It’s very strong, easy to sharpen and the edge lasts a good while. A chisel grind is a rough cutter and feels like it catches and jumps when you are trying to do precise cuts.

In my time as a Marine, I carried an Emerson CQC-7BW. At that time I knew nothing about knives, but I knew the CQC-7BW was ‘the’ tactical knife. Over time I grew to appreciate 154CM steel and the chisel grind as something that was easy and quick to sharpen in the field. Often I had nothing more than the sharpening rod on my bayonet sheath.

Getting the Mini CQC-15 ready can be done quickly with minimal tools, time, or effort. In the tactical world, you might not have the tools and time to get a nice sharpening in. Your day patrol may turn into a three-day mission, and all you have is what’s on your back and in your pockets. You also want the edge to last and the blade to be strong. If it breaks in country, you can’t exactly go online and order another

Handle, Ergonomics, and Pocket Clip

The Mini CQC-15 is a fat bottom girl, and I love it. The handle is wide and fills my paws well. The knife has a palm swell, and a decent jimping for the thumb. The handle fills my hand very nicely, and I have no complaints about its design or shape. The grip design reminds me of a more subtle version of the ancient Greek kopis handle. It’s designed to aid in retention when cutting or stabbing.

The G-10 grips panels are aggressively textured, and some people might find it uncomfortable. You should bear in mind that by order gloves are part of the personal protective equipment of the uniformed services. Gloves can challenge grip, so this aggressive texturing is a must have for a knife like this.

The clip is nice and straightforward. It’s robust and has never bent or accidentally grabbed my chair as I go to sit. It’s tight, so the knife stays planted in the pocket. As the mini variant, it’s a bit more pocket-friendly. I never noticed any discomfort when carrying the knife. I never notice its even there until I need it. Unfortunately, it’s for righties only, but left-handed models of these knives are available. Seems a little ridiculous not to tap the knife for lefties

Deployment and Lockup

The Mini CQC-15 has a titanium liner lock that’s strong, but the knife seems to lock-up at different points. This is especially true if you use the wave method of opening these knives. Sometimes it goes extremely far and other times barely at all. However, I have never had the lock fail me in any way. I will admit I find myself subconsciously checking to make sure the blade is locked before getting the work.

Deployment can be done through a top thumb disk that’s ambidextrous, well textured and feels strong. It’s a slow deployment method, but a functional one. If you want to go a little faster, you have the wave method. The wave is based on that little hook on the thumb rest that is supposed to catch on your pants and open the knife as you draw it.

It’s a neat feature, but it doesn’t always work. It seems to work better in some pants than others. Pulling the knife like that is not dependable enough to trust in a self-defense scenario. I will say it works way better in jeans than in the typical material uniform pants is made of, which is odd seeing as who these knives are designed for. I may also be bad at opening a knife this way. The utility is there, but I can’t seem to master the wave.

Emerson Mini-CQC 15 Review – Final Thoughts

The lens you view this knife through is likely going to significantly affect your opinion on it. It’s not a graceful tool, and for the cost, you can get a knife that cuts smoother, features an ambidextrous pocket clip, and a more natural method of deploying the blade.

The Mini CQC-15, as well as the rest of the CQC series, is designed for folks in uniform. They have a broad set of features that make them an excellent knife for those in uniform. I still love it, and my CQC-7BW, but I am aware of my own bias and nostalgia. That being said its an objectively good knife, and one I would suggest if strength and simplicity are your main desire.

Emerson Mini CQC-15 with Plain Black Blade

If you are thinking of buying an Emerson Mini CQC-15, please consider purchasing it at Amazon or BladeHQ. Thanks for reading.

Gerber Flatiron Review

by Travis Pike 3 Comments

What’s with the rise in popularity with cleaver knives? It just seemed like one day they were everywhere. We had options from Spyderco, Boker, Kershaw, CRKT, and of course the Gerber FlatIron. The FlatIron made a big showing at SHOT, and it makes sense why. Gerber is a massive company, the FlatIron looked cool as hell, and Gerber promised a low price tag. Once the FlatIron hit the streets, they were tough to find, and in December I got my hands on one. For 31 bucks I didn’t have massive expectations, but I have plenty of budget knives that perform beyond their price tag.

Buy the Gerber FlatIron at BladeHQ

Buy on Amazon

The Gerber FlatIron comes in two different grip styles, a hunter green aluminum grips and FDE colored G10 grips. The knife is a folder and pushes full size to its limits. Gerber makes lots of knives at lots of different price points, some hit, some miss, but how does the FlatIron come out?

General Dimensions and Blade Details

The Gerber FlatIron gains its unique name from the flat, cleaver blade it has. The blade is 3.8 inches, with an overall length of 8.5 inches. It’s a big knife and weighs 5.6 ounces. That’s a bit heavy for a folding knife. As a cleaver the blade is quite broad, it sits at 1.125 inches wide and is .15 inches thick. It’s a big knife, and a cleaver has to be.

Cleaver knives have become quite popular these days due to their robust blade design and just how thick they are. The cleaver blade is designed for cutting, slicing and chopping and the Gerber FlatIron has a very sturdy blade. The lack of a point is a downside to some and limits the knife’s versatility. The benefit is the knife less aggressive looking and lower profile in case that is a concern. In some situations, you may not want a point. I know a few first responders who carry Sheepshead blades to cut and slice near people while reducing the chance of stabbing someone if the knife slips.

The blade is made from the always fun to type 7Cr17MoV steel. This is cheap steel, and the FlatIron is an affordable, Chinese produced, knife. It dulls relatively fast but sharpens easily. This is good because Gerber has dull blades when purchased. I’ve put it through my Smith’s Pocket Pal a time or two, and it edges right up. From what I’ve read this steel is pretty tough and resists corrosion well.

Once sharpened it cuts well. My use for a cleaver has always been the kitchen, and the FlatIron separated meat from bone pretty easily. It cuts smooth and deep through meat and might make an excellent field kitchen knife. Additionally, as a cutting blade, it does excel when sharpened for cutting through tougher materials like thick cardboard, and plastic straps. The FlatIron was my go-to for opening Christmas present boxes for the kids this year.

The blade has a worn, stonewashed finish that’s plenty attractive from a purely aesthetic standpoint. The whole knife looks cool, and that’s likely one of its most significant selling points. It’s like a straight razor that locks.

The knife has a hollow grind, which isn’t a problem itself. However, the grind is very uneven. Looking down the tip of the blade shows a highly irregular and crude grind.

Handle, Ergonomics, and Pocket Clip

The FlatIron sports an odd, but comfortable handle. One side features a grip panel, either aluminum or G10, and the other side is stonewashed aluminum that incorporates the frame lock and pocket clip. It’s a big handle that fills the hand which I do enjoy. The G10 grips provide more of a gripping surface, and the aluminum grips are smoother and better looking.

The blade has a large choil that allows you to choke up on the knife for increased control and leverage for tougher cuts. It’s certainly deep enough to keep your finger from slipping out. The handle is also completely open. This makes it easy oil and clean. It is a small, but a nice feature I appreciate it living around sand and salt water. The rear of the blade has zero jimping which is odd.

The pocket clip has a lot of good to it, but a bit of bad to go with it. First off, I like the short, but thick design. It’s low profile and also subtle. Best of all it doesn’t get in the way of your grip on the knife. It looks good too. It’s pretty tight though, and it’s difficult to get onto my jeans. Also, its right side, tip up only. You can’t reverse it in any way due to handle’s design. A bit of a downside in my book.

Lock and Deployment

The frame lock is simple, and in my experience, these locks are robust and handy. When you squeeze the grip, the lock is reinforced which means its a safe knife for hard work. Once opened the blade is locked in solid. There is no play left to right or back and forth. The frame lock is robust and does its job well with the big blade. The lock has a full inch of texturing where the thumb naturally falls, and this makes it easy to defeat the tight lock and fold the blade.

The blade opens via a thumb hole. This design isn’t bad, but the blade is a bit tight when new. A little blade oil helped as did some use and now I can flick it open with ease. The blade will open smoothly, even when stiff. There is no grit or stop and go feeling as the knife opens. The thick blade makes the thumb hole easy to use. It’s a deep hole, so your thumb isn’t likely to slip out.

The Gerber FlatIron Review – Final Thoughts

The Gerber FlatIron’s greatest strength is its looks. It’s not particularly special outside of looking nice. You can’t demand much from a 30 dollar knife, but I’d expect at least an even hollow grind. I do see one solid purpose for this knife, and that would be for a younger, new knife owner.

Follow my logic here:

The blade lacks a point which reduces the risk for young and new knife users.
The 7Cr17MoV steel is sturdy and corrosion resistant, so it can take the abuse, and since it dulls fast they’ll be learning to sharpen it, and it sharpens easily enough.
The frame lock is very safe for heavy or clumsy work.
While the knife can be flicked open it’s still slower than a Kershaw with speed assist or anything crazy. It’ll never be accidentally opened.
The FlatIron is tough and robust so it will resist abuse.
It’s easy to clean.
It’s affordable in case it is lost or broken.

For people who are used to nice, high-end knives, the FlatIron might be a disappointment. I like the knife personally, but that’s because of my inner mall ninja. It doesn’t do one any one task well, but it is affordable, safe and tough.

Sale

Gerber Gear 30-001495N Flatiron Folding Pocket Knife Cleaver, 3.6 Inch Blade, Desert Tan

DURABLE EDC GEAR: The Gerber Flatiron folding pocket knife features a plain edge cleaver style blade, thumb hole for one-hand opening, finger choil, frame lock, aluminum handle scales, and pocket clip with clip for secure EDC
INNOVATIVE DESIGN: Features an upgraded D2 steel blade, which provides impressive toughness and edge retention, designed for hard-use applications and survival gear needs
OUTDOOR ESSENTIALS: The Flatiron pocket cleaver knife is great for any hunter, tradesman, and everyday carry; perfect addition to camping essentials, toolbox, work wear, and hiking and fishing gear
COMPACT AND CONVENIENT: 3.6" blade length, 8.5" overall length and 3.9 oz weight make the Flatiron folding pocket knife an essential addition to your EDC gear and outdoor tool collection
GERBER GUARANTEE: Backed by a limited lifetime warranty, ensuring quality and reliability in all Gerber essential hunting gear

Editor: I recommend purchasing the Gerber Flatiron at Gerber Flatiron or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.