• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

BladeReviews.com

Knife Reviews

Menu
  • Home
  • Reviews by Brand
    • Al Mar Knives
    • Benchmade Knives
    • Boker Knives
    • Buck Knives
    • Cold Steel Knives
    • Chris Reeve Knives
    • CRKT Knives
    • DPx Gear
    • Emerson Knives
    • ESEE Knives
    • Fällkniven Knives
    • Fantoni Knives
    • Gerber Knives
    • Great Eastern Cutlery
    • Hinderer Knives
    • Hogue Knives
    • Ka-Bar Knives
    • Kershaw Knives
    • Kizer Knives
    • LionSteel Knives
    • Mcusta Knives
    • Mora Knives of Sweden
    • Microtech Knives
    • Ontario Knives
    • Opinel Knives
    • Reate Knives
    • Rockstead Knives
    • Schrade Knives
    • Shirogorov Knives
    • Smith & Wesson Knives
    • SOG Knives
    • Spartan Blades
    • Spyderco Knives
    • Steel Will Knives
    • Strider Knives
    • Victorinox Knives
    • Viper Knives
    • Zero Tolerance Knives
    • Close
  • Reviews by Purpose
    • EDC Knife Reviews
    • Tactical Knife Reviews
    • Survival Knife Reviews
    • Hard Use Folding Knives
    • High End Pocket Knives
    • Gentleman’s Folders
    • Rescue Knives
    • Traditional Knives
    • USA Made EDC Knives
    • Close
  • Reviews by Class
    • Folding Knives
    • Fixed Blade Knives
    • Assisted Opening Knives
    • Automatic Knives
    • Machetes
    • Titanium Frame Lock Knives
    • Close
  • Best Of
    • The Best EDC Knives
    • Best Survival Knives
    • Best Tactical Knives
    • Best High Value Knives
    • Close
  • Gear Reviews
    • Flashlight Reviews
    • Multi-Tool Reviews
    • Watch Reviews
    • Knife Sharpener Reviews
    • Close
  • FAQs
    • Knife Care and Maintenance
    • Knife Dictionary
    • Knife Steels
    • Steel Composition
    • Interviews
    • Close
  • Contact
  • About
    • About
    • Privacy
    • Links
    • Close

Gayle Bradley

Spyderco Bradley Folder 2 Review

by Travis Pike 5 Comments

I’ve set some odd goals throughout my life. Goals that are a personal measure of my own success. One of those goals was to carry a Spyderco as an EDC knife. I always associated Spyderco with expensive and high quality. Why? I’m not exactly sure. Realizing that knives from companies like Microtech can cost 5 times as much as a Spyderco didn’t change my mind. To me a Spyderco was a measure of a certain kind of success.

Spyderco Bradley Folder 2
Buy the Spyderco Bradley Folder 2 at BladeHQ

Buy on Amazon

I had a bit of a rush when I finally purchased my first Spyderco. This is my third Spyderco and I get that same rush. The Spyderco we are talking about today is the Gayle Bradley Folder 2. The Spyderco Bradley Folder 2 has been my EDC for most of the fall and winter so I’ve had the time to get to know it.

We all know who Spyderco is and we know they produce high quality knives designed for hard work. Gayle Bradley may be familiar to some readers, but let’s talk about him a bit for those who aren’t familiar with his work (we previously reviewed Bradley’s original collaboration with Spyderco, and the Spyderco Air as well). Gayle Bradley has been designing knives for over 30 years. His knives have set Blade Sports world records twice and stay in high demand. The calling card of his knives is the combination of form and function.

Gayle Bradley’s knives work and look good doing it. The Spyderco Bradley Folder 2 is no different. The collaboration between Gayle Bradley and Spyderco has produced my favorite Spyderco yet.

General Dimensions and Blade Details

The Bradley Folder 2 has an overall length of 8.48 inches, has a 3.66-inch blade, weighs 4.5 ounces and is built in Taiwan. Since it has a 2 in the name you can assume this is the second Bradley and Spyderco collaboration. The Bradley Folder 2 is longer in both blade and handle than the original, but remains the lighter knife. The Bradley 2 is a half an ounce lighter than the original.

This knife is too pretty for me. It’s so good-looking I almost hate to carry and abuse it. As you can see from the pictures I seemed to have gotten over that. I’ve used and abused it quite a bit. The handle features carbon fiber and G10 laminate grips. This gives the knife it’s eye catching outward appearance. It’s not until you spend some real time with this knife you appreciate it’s refinement. Once you get to third date you can take a peek under the skirt.

Spyderco Bradley Folder 2 Blade

The blade is hollow ground and the symmetry is painfully perfect. The way the grinds on the top of the blade catch the light is something you can only experience with one in your hand.

The blade is made from CPM M4 steel. The benefits of this steel are numerous. It’s strong, it holds an edge forever, and it can be razor sharp with little effort. The knife gods can’t give without taking though. M4 is a tool steel and not a stainless steel so it will rust if you don’t take care of it.

My blade isn’t rusted, that’s tar. I’ve been re roofing my home and the Bradley Folder 2 has been along for the ride. Once I have the time I’ll sit down with some blade oil and a stiff AP brush and try to clean it. For now, it just adds character.

Spyderco Bradley Folder 2 Liners

From the factory the blade is a razor. It sliced through any and everything with ease. Paper, roof shingles, cardboard, rope, and more. Dragging it over certain materials was enough to make cuts. I remain impressed by how sharp I can get this blade. Equally impressive is how long it remains sharp.

Handle, Ergonomics, and Pocket Clip

The extended handle on the Bradley Folder 2 will be appreciated by anyone with XL hands. The design includes a subtle finger guard to help resist hand slippage when working hard. The rear of the handle has an inward curve that accommodates a thumb on top grip. The screws that hold the grip panels to the knife are countersunk and blackened to blend in with the grips. There is a total of 8 Torx screws in the grips, 4 on each side.

Spyderco Bradley Folder 2 Handle

That carbon fiber pattern offers you a grippy texture. It helps keep the knife in your hand, but isn’t abrasive or uncomfortable. The pattern itself is not just nice to look at, but functional.

Spyderco Bradley Folder 2 Ergonomics

The back of the blade has a small textured session to rest your thumb on. It’s nice but it could be bigger. There is plenty of room to extend the texturing if they chose to do so. The blade is easy to control for fine cuts and the handle is comfortable during long stretches of work.

Included is a simple, but long pocket clip. It’s 2.5 inches long and adorned with a cute little Spider. The pocket clip can be moved to 4 different positions. You can carry the knife tip up or tip down and it can be orientated for left or right handed carry. The Bradley Folder 2 is a completely ambidextrous knife.

Spyderco Bradley Folder 2 Pocket Clip

Deployment and Lockup

The Bradley Folder 2 has a larger ½ inch deployment hole. When it comes to Spyderco’s deployment hole design you either love it or hate it. For me it’s easy to reach and puts the blade into action fast enough. It’s far from the fastest deployment system, but its smooth and reliable. There isn’t a little piece of metal screwed to the side of the blade that’s waiting to fall off.

Spyderco Bradley Folder 2 Lockbar

Once the blade is locked in place it’s staying there. The blade has zero play in any direction. You can feel the slight hiccup right before the liner lock engages. This the only point where deployment isn’t 100% smooth. The liner locked is textured which is a nice touch. This makes it easier to unlock the knife, especially when your hands are cold and numb.

Spyderco Gayle Bradley Folder 2 Review – Final Thoughts

The Gayle Bradley Folder 2 is a great little knife. It mixes both form and function flawlessly. It gives users something they can admire with the hand and the eye. The Bradley Folder 2 is a workhorse. Just because it’s pretty doesn’t mean it can’t get dirty. This isn’t the cheapest Spyderco, and you are probably paying a little extra for the looks. Are looks worth it?

Well, that’s subjective. To me, it’s worth every dime. I think it’s a fantastic knife and it will likely stay in the carry rotation for some time.

Spyderco Bradley Folder 2 Specialty Knife with 3.66' CPM M4 Premium Steel Blade and Black Carbon Fiber Laminate Handle - PlainEdge - C134CFP2
Spyderco Bradley Folder 2 Specialty Knife with 3.66" CPM M4 Premium Steel Blade and Black Carbon Fiber Laminate Handle - PlainEdge - C134CFP2
  • Folding Knives: Locking folding knives are safe, compact, and easy to carry. They also happen to be where the Spyderco revolution began.
  • Carbon Fiber: Graphic fibers (the size of a human hair) woven together then fused with epoxy resin. Lightweight with a high level of tensile strength it is three dimensional in appearance.
  • Hollow Grind: It comes with bevels that are ground with a concave radius. The bevels may extend the full width of the blade (full Hollow Grind) or only a portion of its width.
  • PlainEdge Blade: This knife has a sharpened blade with no serrations or teeth sometimes referred to as a smooth blade.
  • Specifications: Closed Length (Inches): 4.82, Overall Length (Inches): 8.42, Blade Length (Inches):3.6, Blade Steel: CPM M4, Grind: Hollow
Amazon Prime
Buy on Amazon

Editor: I recommend purchasing the Spyderco Bradley Folder 2 at Amazon.com and BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Filed Under: EDC Knives, Folding Knives, Hard Use Folding Knives, Spyderco, Tactical Knives Tagged With: carbon fiber, Gayle Bradley, m4, made in Taiwan

Spyderco Air Review

by Benjamin Schwartz 6 Comments

Last Updated: August 11, 2019
Although working with custom makers has become common practice for knife companies, many of these collaborations end up feeling like compromises. Whether it’s because of restrictive budgets, or sub-par execution, or whatever else, rare is the collaboration knife that feels like an unhindered expression of a maker’s vision and style.

Spyderco Air Review
Buy the Spyderco Air at BladeHQ

Buy on Amazon

The Spyderco Air, a knife made in collaboration with Gayle Bradley, quite conspicuously unsettles that trend; it is a considered collaboration, and the result is a knife that is fully a Gayle Bradley even as it is clearly a Spyderco. It feels thoroughly thought-out in a way most knives do not. It isn’t the perfect knife for every task, but for the tasks it is designed for, I can’t think of a knife that performs any better.

General Dimensions and Blade Details

The Air has a blade length of 2 5/8”, a 3 ½” handle, and an overall length of almost exactly 6”; thanks to a combination of milled out titanium liners and thin silver twill scales, it weighs just 1.3 oz. Its lightness is one of the reasons why the Air is billed as a gentleman’s folder, but it is surprisingly robust (more on that later). The Air is made in Taichung, Taiwan.

Although the whole knife benefits from Bradley and Spyderco’s attention to detail, the blade is the heart and soul of the Air – as it should be with any knife. It begins with the shape, a Wharncliffe with a few small, but very important, tweaks: first, a subdued swedge that not only reduces material and weight but gives the Air genuine piercing capability for biting into packaging or cardboard or the like. Second, either a slight cant to the blade or an actual curvature that gives it a little belly, making the traditionally neutral -feeling Wharncliffe shape a little more aggressive with material.

The Air’s blade is made from CPM-M4 steel, a tool steel with a reputation for extreme edge retention. Looking at the composition chart for M4, the standout element is the amount of Molybdenum; at 5.25%, that’s significantly more than any steel I know of or was able to find. Molybdenum makes a steel tougher and keeps the grain size small, allowing for finer edges – and indeed the edge on my Air came clean and has remained so despite a fairly rigorous couple years of use. It doesn’t get toothy or cut rougher as it dulls – and it hasn’t dulled much in two years of fairly rigorous use.

Spyderco Air Blade

I think the grind is responsible for the edge’s longevity; although the Air is ground thin, the stock isn’t as thin as you’d maybe expect, and there’s still a fair bit of material right behind the edge, which keeps the edge stable. I would take issue with this grind if it affected cutting performance at all, as I’d gladly trade toughness for slicing ability with a knife of this size, but it doesn’t; Bradley and Spyderco seem to have really understood what makes M4 appealing, and ground the Air to best take advantage of that appeal. The end result, as Gayle Bradley discusses in this video interview, is that you have a small, discreet knife that can actually be used pretty hard.

That’s not to say that M4 is perfect. It is a tool steel, which, at least when we’re talking about knives, tends to mean something non-stainless. In my experience M4 tends to tarnish where it is handled a lot, such as around the Spyder Hole. I don’t cut a lot of food with my knives, so my Air wasn’t exposed to the acidity of an apple or a tomato very often; if you use your knife for food prep you may see more discoloration than I did. Even if that were the case, such discoloration is an aesthetic issue, and doesn’t affect performance.

During the testing period for this review I forgot to take the Air out of my pocket and sent it through the wash. When I found it, it was spotted with surface rust over one side, but thankfully a few minutes with a polishing cloth and the rust was gone. This isn’t an indictment of M4, because most steels would rust in that situation; just a public service announcement to check your pockets before doing laundry.

Handle, Ergonomics, and Pocket Clip

The handle of the Air is interesting: like the full-size Spyderco Bradley folder, it consists of scales laid over slightly larger liners. This allows the Air to fill the hand while still looking sleek; I think if the twill scales were extended to covert the liners entirely that it, along with the then-necessary chamfering, would make the Air look chunky. All that aside, the arrangement is visually interesting, and I can’t complain about the functionality either: the Air fills the hand better than something like the Al Mar Hawk Ultralight. You can fit all four fingers on the Air, and there’s even a divot in the spine of the knife to rest your thumb during harder cuts – another sign that it was meant to do some heavy-duty cutting.

Spyderco Air Handle

The Air doesn’t have a pocket clip. Apparently Spyderco conducted a survey, and half of the people asked wanted a clip, and the other half didn’t. Ultimately, I think going clipless with the Air was the right decision. The Air is so sleek and lightweight that you truly don’t notice it in your pocket. I always notice a knife that I have clipped to my pocket, no matter small and unobtrusive. Also, I feel that Spyderco would have opted for the wire clip like on the Dragonfly II and, as nice as that clip looks and performs, I find it too easy to break. Finally, the materials the Air is made of are conducive to in-pocket carry; whereas I worry about my Hawk or my Indian River Jack if I carry it without a slip, the Air looks as good today as when I got it, and seems impervious to wear and tear.

Spyderco Air in Hand

Deployment and Lockup

We all know that the Spyder Hole is an excellent deployment method. Mr. Bradley buried the hole pretty deep into the handle, and although it is slightly occluded, there is more than enough exposed to get purchase with your thumb, and the super smooth deployment takes care of the rest.

For lockup there is a titanium liner lock. Although I don’t remember quite how far the liner travelled when my Air was brand new, after two years it is quite close to the opposite side:

Spyderco Air lock

Whether this is how it was when I got it, or if it’s a result of the titanium deforming over time, I’ve never had the least amount of bladeplay, and there are very few knives in my collection about which I can say that. And, one of those “The More I Use Knives” things I’ve learned is that the amount of travel on a liner lock isn’t a clear indicator of how well it will work.

One interesting note about the Air: it has an internalized stop pin that’s set into the back of the tang and rides in channels around the pivot. Mr. Bradley talks about the aesthetic merits of this design in the previously-cited interview, and I can’t say that there’s any other concrete benefit to it, but it’s certainly very cool.

Spyderco Air vs. Delica

Spyderco Air Review – Final Thoughts

In its product class – an EDC blade, or perhaps the increasingly nebulous ‘gent’s folder’ designation- the Air is about as good as it gets. There are knives that I like as much, like the Indian River Jack or the Hawk Ultralight, but I can’t say that either of those knives are objectively better- and in fact there are definite advantages the Air has over either: one-handed opening over the IRJ, and better steel than the Hawk.

Ultimately, when we’re looking at a collaboration knife like the Air, the faithfulness of the collaboration isn’t the point: what matters is what the faithfulness resulted in, and in this case the result is a knife of unmistakable quality.

Spyderco Air Glass Fiber Plain Edge Knife
Spyderco Air Glass Fiber Plain Edge Knife
  • Made using the highest quality materials
  • Tested for quality and durability
  • The most trusted name in you cutlery needs
  • Clip less folding knife
  • Walker Liner Lock
Buy on Amazon

I recommend purchasing the Air at Amazon or BladeHQ. Thanks for reading!

Filed Under: EDC Knives, Folding Knives, Gentleman's Folder, Spyderco Tagged With: Gayle Bradley, m4, made in Taiwan, silver twill

Spyderco Gayle Bradley C134CF Review

by Dan Jackson 13 Comments

Last Updated: August 26, 2019
The Spyderco Gayle Bradley (C134CF) is one of those knives that was built for use and abuse, but is so nice I wasn’t sure if I could bring myself to really scuff it up. I guess the only reasonable answer is to buy two of these, one for carry and the other to keep pristine in the bowels of the collection.

Spyderco Gayle Bradley Review
Buy the Spyderco Gayle Bradley at BladeHQ

Buy on Amazon

The knife was named after its designer, Texas custom knifemaker Gayle Bradley. Mr. Bradley has been making custom knives out of his shop in Weatherford, Texas for over 22 years. He also has the distinguishment of winning BladeSports International Cutting competition in 2008 (he had the most points for the 2008 season).

The Spyderco C134CF is Bradley’s first production knife collaboration. The knife is made from heavy duty M4 steel – the same steel Mr. Bradley uses in his competition cutting knives. With Mr/ Bradley’s credentials and the use of such a high end steel you know that this knife has the potential to go the distance.

General Dimensions and Blade Steel

The Gayle Bradley has an overall length of 8.078″, a 3.438″ blade, weighs 5.5 ounces, and is made in Taiwan. This is a large and thick folder with graceful lines and a rock solid feel. The knife is manufactured in Spyderco’s Taichung Taiwan factory. Sure, I’d love to see this knife made in Golden Colorado, but I can’t deny that some of Spyderco’s best knives, from a fit and finish perspective, are currently coming out of Spyderco’s Taiwanese factory.

The Gayle Bradley has extremely high build quality – it’s difficult to describe on paper but the moment you handle this knife it all comes together. The dimensions and feel of this knife make it slightly large and heavy for EDC, although it would certainly work in that role. This knife is a work horse and it’s intended use is heavy cutting tasks.

The blade is a modified drop point with a high hollow grind and a sloping swedge. The blade has been given a beautiful satin finish that gleams in the light. This blade is a thing of beauty from any angle. Blade thickness is right at 3mm. It is thick enough for tough tasks, but is still ground thin enough to be a capable slicer. This blade is almost all edge and the long curving belly provides tons of room for cutting.

Spyderco Gayle Bradley Blade

The blade is made from Crucible CPM-M4 steel. M4 is a high quality tool steel and Crucible’s version uses their Crucible Particle Metallurgy (CPM) manufacturing process to enhance the toughness and ensure the M4 has a consistent grain. What this means is that the knife will really hold an edge and is capable of getting extremely sharp (sharp enough to win Mr. Bradley a couple world records in cutting competitions). This is not a stainless steel so you will need to take care to keep the blade dry and (preferably) oiled.

Handle, Ergonomics and Pocket Clip

The knife has a flow through, pillar construction handle made of textured carbon fiber and full-length steel liners. The liners have been milled out in an attempt to reduce the weight, but this is still a substantial folder. The handle is bolted together (rather than pinned) which is great if you ever have the desire to take this knife apart (perhaps you want to try and mill it out yourself). If you are thinking of milling the liners out I want to wish you good luck because these are some of the thickest liners I have seen. This is a very heavy duty handle.

Spyderco Gayle Bradley Handle

The carbon fiber Spyderco selected is the textured version used on the Spyderco Sage (review coming soon). This has a “weave” like texture that provides decent grip considering it’s carbon fiber, a traditionally smooth material. There is light jimping on the lock bar and on the thumb ramp, which combined with the finger choil and flowing handle make for a very comfortable and ergonomic grip. This all helps to make the knife a great work knife. For those that intend to use this knife heavily I think the handle design and ergonomics will be great for that.

Spyderco Gayle Bradley Pocket Clip

The pocket clip is also quite interesting. It has a smokey gray black finish that almost looks anodized although the clip is definitely steel. It is a unique looking finish that I really like and is another detail that makes this a special knife. I also like how the clip can be mounted on all four corners of the knife. The knife rides low in the pocket and the blackened clip won’t attract much attention (unless you are around a bunch of knife knuts).

Deployment and Lock

The Gayle Bradley uses an extra large (1/2″ diameter) Spyder hole and phosphor bronze bushings for deployment. This knife is very easy to open and it is super smooth. The deployment feels just as good as the rest of the knife which is great news indeed. The ultra thick liner lock sits snugly on the blade. This knife is constructed very solidly and with that extra thick liner lock I think this knife is capable of taking some abuse. Really the lock-up and deployment are both very impressive; it’s hard to put it into words.

Spyderco Gayle Bradley: Liner Lock Detail

Spyderco Gayle Bradley Review – Final Thoughts

Mr. Bradley said that he was very pleased with the way the knife came out, and he gave it his full endorsement. I have to say, the knife has my endorsement too. The beautiful design, the high quality materials and the excellent construction make this a great knife in my book. It also is a great value. The knife has a $225 MSRP but I am seeing it retail for right around $130. At that price I think it is a steal. Of course, this knife isn’t for every one. The weight may be an issue, and it may be on the large size as well, but overall I think this is a great knife and I look forward to more Gayle Bradley collaborations.

Spyderco Gayle Bradley Folder Carbon Fiber PlainEdge Knife
Spyderco Gayle Bradley Folder Carbon Fiber PlainEdge Knife
  • Made using the highest quality materials
  • Tested for quality and durability
  • The most trusted name in you cutlery needs
  • Carbon fiber handle. Screw-together construction.
  • 4-way hourglass steel clip. Full-length internal liners.
Buy on Amazon

I recommend purchasing the Gayle Bradley at Amazon or BladeHQ. Thanks for reading.

Filed Under: EDC Knives, Folding Knives, Hard Use Folding Knives, Recommended Hard Use Knives, Recommended Tactical Knives, Spyderco, Tactical Knives Tagged With: carbon fiber, Gayle Bradley, liner lock, m4, made in Taiwan

Primary Sidebar

Follow Us on FacebookFollow Us on TwitterFollow Us on YouTubeFollow Us on RSS

Subscribe to Email Updates and Never Miss a Review (No Spam)!

Enter your email address:

Delivered by FeedBurner

Shop BladeHQ

Shop Outdoor Gear on Amazon

Shop KniveShipFree.com

Search BladeReviews:

Best of BladeReviews:

Best EDC Knives
Best Survival Knives
Best Tactical Knives
Best High Value Knives

Copyright © 2025 · Log in