aluminum

Hogue EX01 Review

Last Updated: March 9, 2019
Hogue, a company best known for their gun grips and rifle stocks, has recently entered the realm of high end production knives. This is a pretty bold move for any company. After all, to quote Borormir in the the Lord of the Rings, “one does not simply start manufacturing knives” …or something like that.

Buy the Hogue EXO1 at BladeHQ

Buy on Amazon

So Hogue teamed up with one of the best in the business – award winning knifemaker Allen Elishewitz. Quite frankly, the results of this collaboration are extremely impressive. This is a very nice knife by anyone’s standards, and it’s hard to believe Hogue has never made a blade before. I had to acquire one of their knives for review. So lets take a closer look at the EX01, the knife that put them on the map.

General Dimensions and Blade Details

The EX01 comes in two different sizes (3.5″ and 4″ blades), with two different blade shapes (drop point and tanto), and two different handle materials (G10 or aluminum). Shown here is the 3.5″ model drop point with a G10 handle. This particular knife has an overall length of 8″, and 3.5″ blade and it weighs 4.3 ounces. Its aluminum counterpart weighs slightly more at 4.6 ounces, but tends to retail for slightly less. All of the EX01 folders are made in the USA.

The 4″ version of the knife has an overall length of 8.875″ and weighs 5.1 ounces (5.6 for the aluminum version). I selected the 3.5″ model because I wanted to use the knife for every day carry, and I am very happy with that decision. The knife carries well, feels light for its size, and the drop point version is reasonably unassuming. The 4″ version strikes me as a bit much for EDC, but that is a choice that ultimately you will have to make.

The drop point version of the knife is nicely executed. You have a high flat grind with a long lean swedge that falls into a sturdy tip with an edge that has a good amount of belly. Speaking of the edge, the EX01 comes with the nicest edge I have ever seen on a production blade. It is a full mirror polished edge – perfectly formed, nice and even. Apparently these are all done by hand. With most production level knives the edge grinds are usually a little off, and some can be downright sloppy. Needless to say that wasn’t the case with this knife. And yes, the knife came extremely sharp. I guess the only problem is while I can sharpen a knife ok, I will not be able to maintain that mirrored edge with my usual stones. My advice is to instead try and maintain the edge with a strop while you can.

The tanto version of the knife is quite striking, featuring a wicked raised spine, and downward sloping blade. I would not mind adding a tanto EX01 to the collection at some point either!

Hogue went with tried and true 154CM for the blade steel. This particular 154CM has been cryogenically heat treated to 57-59 HRc. It takes a nice edge, and has held onto it after a good amount of use. I’m not saying it’s a super steel, but I have always been a fan of 154CM. Here my thoughts are no different. Not only does it polish up beautifully, it also stonewashes very nicely – as evidenced by the handsome tumbled finish on the EX01.

Handle, Ergonomics and Pocket Clip

The EX01 is offered with either an aluminum or G10 handle. Hogue calls their G10 (shown here) “G-mascus.” Really it’s just layered G10 with some waves in it, finished to bring out a faux damascus look. Personally, I prefer the less busy look of regular G10, and probably should have gone with the aluminum version of the knife. That said, the G-mascus is a little different, and I’m some sure will like the effect.

More importantly the handle is superbly constructed. It’s made from 2 pieces of G10, and has been bolted together along with partial stainless steel liners. I love the hardware Hogue selected for the button lock, pivot, and safety. The bright stainless steel contrasts nicely with the handles, and the whole production just oozes of quality. The design features a lanyard pin, which is an elegant alternative to your more common lanyard hole. All in all construction is very solid, and the knife is beautifully finished.

In hand the EX01 is a solid performer – comfortable and capable. Allen apparently has a strong martial arts background, and I can see this in his “ergonomic plan.” The position of the finger choil sets you back on the knife a bit to maximize reach. In this position the EX01 feels very comfortable, with your palm melting into the rounded pommel, and your finger sliding confidently around the choil. There is some jimping along the back of the knife. It’s not super aggressive, but provides some grip and feedback. You can choke up on the handle, and that works well too. The knife feels very good in a reverse grip as well.

The pocket clip is an interesting and almost feminine contrast to the rest of the knife (especially the sharp lines of the tanto version). Rounded and bulbous, this spoon-style clip is securely held in place with 3 screws, and is tapped for right side tip up / tip down carry. Despite the contrast this is a nice pocket clip – secure and easy to use. It rides reasonably low, and is easy to insert and remove from the pocket. I really like how the EX01 carries (at least the 3.5″ version). The knife is light and comfortable, and I quickly forget it is on me. I think it’s a great choice for EDC.

Deployment and Lockup

The EX01 makes use of ambidextrous thumbstuds to open the blade. The thumbstuds are nicely positioned, and it is very easy to pop the blade out with your thumb. Deployment is both fast and smooth thanks to a unique design where large stainless steel washers are molded into the partial liners of the G10 handle. According to Allen these integral washers will burnish over time, and the knife will get smoother and smoother. The aluminum version does not have any liners. Instead, a raised portion of the type 3 hard anodized finish mates directly with the tang of the blade. Type 3 hard anodizing is extremely tough, and like the stainless steel washers it will burnish over time. Either way, deployment will be smooth, fast, reliable, and durable straight out of the box.

The EX01 makes use of a button lock to secure the blade open. The button lock has been nicely implemented. Lockup is very sturdy, and firm (but reasonable) pressure is required to disengage it. In practice the lock feels strong, and it has worked well for EDC tasks. I would put it right up there with an axis lock or compression lock for regular use. There is an added external safety that can be used to lock the knife open. Personally, I’m not a huge fan of external safeties, and I find that this one has got in the way on more than one occasion. It can be removed, but the handle doesn’t look as good without it.

Blade retention (or the “detent”) is pretty good on this knife. I had no issues with the knife opening accidentally in pocket, but if I wanted I could snap the knife open with a firm flick of the wrist.

Hogue EX01 Review – Final Thoughts

The EX01 strikes me as a big win for Hogue. I find it especially incredible considering that this is their first attempt at making a production knife.

The EX01 is a solid design, with a lot of interesting details. Stuff like matching circular hardware and thumb studs, the lanyard pin, the way the 2 piece handle perfectly fits together, the integral washers, the perfect blade centering, and of course the mirror polished edge all add up to something special and unique. There is an enormous amount of attention to detail, and Allen Elishewitz has provided a thoughtful design to lay the foundation. The only minor issues I could come up with is that I think the “G-mascus” is kind of hokey, and I could live without the external safety. Some might find the pocket clip too large or funky, but it wasn’t an issue for me. If that is the worst I have to say about the EX01 it leads me to believe Hogue did a damn fine job.

And when you consider how this knife sells for as low as $150, well it really is mind blowing. The fit and finish is outstanding, blowing something like the Paramilitary 2 out of the water. The fact that this knife is manufactured in the USA, is so well made, and features such a thoughtful design make it an instant classic in my book. Highly recommended.

HOGUE 34171 Aluminum Frame 3.5, Drop Pt. Blade, Tumble Finish, Matte OD Green

Overall length: 8 inch
Blade length: 3.50 inch
The 6061 T6 aluminum handle is anodized OD green

I recommend purchasing the Hogue EX04 at Amazon or BladeHQ. Purchasing anything through any of the links on this website helps support BladeReviews, and keeps the site going. As always, any and all support is greatly appreciated – thank you very much!

Benchmade 940 Review

by Dan Jackson 37 Comments

Last Updated: September 4, 2019
If you are as obsessed with knives as I am, you may be on the hunt for “the perfect EDC knife.” You know, the one blade that has it all. Naturally, it is the perfect size, features great materials, is beautifully designed, and carries like a dream. But in my mind a perfect EDC needs to go beyond that. It has to be greater than the sum of its parts, and a little “X factor” never hurt either. Lets be real, for a knife to earn some time in the rotation is one thing, but to stand the test of time the knife has to work for you on another level.

Buy the Benchmade 940 at BladeHQ

Buy on Amazon

That is what drew me to the Benchmade 940. On paper it has all the basic requirements of a good EDC knife, which is always nice to see. But then the 940 had something else. Maybe it’s the unique handle, or the unconventional blade shape. Whatever it was, it drew me in like a moth to a flame, and I know that I am not the first to succumb to this emerald beauty. The 940 has been in Benchmade‘s catalog for well over a decade, and remains one of their most popular designs to this day. Needless to say, it is high time we gave this classic a thorough review.

General Dimensions and Blade Details

The 940 (or “940 Osborne”) has an overall length of 7.87″, a 3.4″ blade, weighs 2.90 ounces, and is made in the USA. In my mind these are real nice numbers for EDC, and that is exactly how I have been using my 940.

But I can also appreciate how the 940 could go beyond a mere EDC item. With an almost 3.5″ blade and an equally generous handle, the 940 could easily be pressed into a self defense role (although I sincerely hope you will never need to use it that way). On the opposite end of the spectrum, the 940 is a beautiful and elegant knife. In many ways exemplifies a modern gentleman’s folder. This is a knife that would do just fine in a suit pocket, or carried on special occasions. So I really like the versatility of the 940. It is fancy enough to make for an upscale EDC, but is big enough to get a lot of work done.

The blade on the 940 is a reverse tanto design. Popularized by the 940’s designer, Warren Osborne, this unique blade shape is best known for providing a sturdy tip, although I think the main draw is just the unique aesthetics. Warren has designed a few reverse tanto models for Benchmade, including the Benchmade Rift and I have generally been impressed by them. This particular blade has been given a high flat grind, and features a swedge running across the top. The 3mm thick blade holds it’s thickness pretty much to the tip thanks to the reverse tanto design. This is an interesting blade shape, and I found it quite capable for all my daily tasks.

The 940 Osborne makes use of S30V for the blade steel, an excellent USA made stainless from the folks over at Crucible. I have spoken about S30V many times before, but as a quick recap S30V is widely regarded as one of the best high end steels commonly found on production knives. When properly heat treated S30V is known for good edge retention, high corrosion resistance, relatively easy sharpening, and a good level of toughness for daily use. I am a big fan of S30V and Benchmade always does a fantastic job with heat treating their blades. Treated to 58-60 HRC, this 940 was no exception.

Handle, Ergonomics and Pocket Clip

The handle on the 940 is where things start to get interesting. First you have the striking aluminum handles. These have been bead-blasted to an attractive matte finish, and then anodized a deep green. I absolutely love the texture of these handles. They aren’t particularly aggressive, but they aren’t slippery either – given the intended use I found it to be a nice balance. Sandwiched between the aluminum handles is a single piece of anodized purple titanium. This backspacer compliments the green handles nicely, and provides a good deal of visual interest.

As for actual construction, the 940’s handle is top notch. There are partial stainless steel liners, and they have been polished to a lustrous shine. I like how when you peer inside the knife the liners reflect the titanium backspacer. It is a little detail, but some times it’s the small stuff that gets you going. Everything has been screwed together with black hardware, and all the pieces line up perfectly. The overall fit and finish of this knife is exceptional.

In 2015 Benchmade released the 940-1, a premium version of the 940 with carbon fiber handles and a S90V blade. It’s a beautiful knife and well worth considering if you are a fan of the original 940. Check out our review of the 940-1 here.

In hand the 940 is surprisingly capable. I say “surprisingly” because at a glance we have a rather thin handle here. In practice I found the handle long enough to comfortably accept my larger hand, and the rows of jimping on both the thumb ramp and finger choil provide a good amount of grip. It is a comfortable knife in forward grips, and I can get some good work done with it. The 940 also works well in reverse grip, and in the closed position as well. Actually, when closed, the 940’s thin profile makes it an excellent choice as a kubotan – another nice option to have.

The pocket clip on the 940 Osborne is a standard Benchmade clip – the same kind you will find in models like their classic Griptilian and Mini Griptilian. I am a big fan of this style of clip. It is simple, sturdy, and works quite well. Benchmade drilled and tapped this model for ambidextrous tip up carry. In pocket the 940 carries wonderfully. Thin and lightweight, this is a knife that you forget you are carrying.

Here is your pocket clip shot:

Deployment and Lockup

The 940 makes use of a pair of ambidextrous thumb studs and an axis lock. Much like many of the other Benchmade knives that I have reviewed with this configuration, deployment on the 940 is extremely fast and smooth. The thumb studs are easy to access allowing you to flick the blade out with alarming speed and very little effort. Phosphor bronze washers aid in that regard, and the net result is reliable deployment in any situation.

Similarly, the axis lock on my knife has also been really well done. Lockup is tight with no blade play, yet the lock is easy to disengage with a single hand, and the blade rotates freely into the closed position. It is no secret I am a big fan of the axis lock, and the 940 is a great example of why. If true one hand operation is important to you (as a righty or a lefty) then I find the combination of thumb studs and an axis lock very tough to beat.

Benchmade 940 Osborne Review – Final Thoughts

The 940 combines excellent materials with smart design and wonderful fit and finish to produce an exceptional daily carry item. On paper this has always looked like an awesome knife, so I was very happy to find that the 940 was just as awesome in real life. Everything works, and it works well. The way I see it, the biggest potential downside here is that the knife isn’t particularly cheap, but for a made in the USA folder with these kinds of features, I actually think the price is quite reasonable.

But what about beyond the specifications? Do we really have a “perfect” EDC knife? I must admit, there is something special about this one. The 940 has really distinguished itself as a design and it has a little something extra that keeps me coming back. I don’t doubt that for many people this will be a perfect EDC knife.

Sale

Benchmade - Osborne 940 EDC Knife with Green 6061-T6 Aluminum Handle (940)

ALL-AROUND UTILITY: A quintessential EDC tool that combines simplicity with unmatched function, no matter the application; Ideal for pretty much everything.
AMERICAN MADE CPM-S30V STEEL: For first-rate edge retention and corrosion resistance; Reverse tanto blade is nimble, versatile, and made for the outdoors.
DURABLE 6061-T6 ALUMINUM HANDLE: Is anodized, fully ambidextrous, has a smooth satin grip, and is suitable for just about any environment that requires a blade.
AXIS LOCKING MECHANISM: Ensures safety and a smooth open and easy close; Standard reversible clip; Light as a feather for easy carrying and a comfortable grip.
EVERYDAY CARRY: With its slim profile and lightweight design, the 940 is the perfect addition to your EDC collection, backpack, survival kit, tackle box, and more.

I recommend purchasing the 940 at Amazon and BladeHQ. Buying anything through the links on this website earns BladeReviews a small commission at no additional cost to you. All proceeds generated are used to keep the site running. Thank you very much for your support.

CRKT Ripple Review

by Dan Jackson 17 Comments

Last Updated: August 4, 2019
The CKRT Ripple is a design that had me doing a double take. The flowing lines and sharp looks were very “Ken Onion-y” and upon closer inspection the knife was in fact designed by Ken Onion. It turns out Mr. Onion has parted ways with the folks at Kershaw and he has been picked up by competitor CRKT.

Buy the CRKT Ripple at BladeHQ

Buy on Amazon

The Ripple was one of Ken’s first designs for CRKT. It’s something of a gentleman’s EDC knife, with Ken’s signature flowing curves in a low profile package.

General Dimensions and Blade Details

The Ripple comes in a few sizes. What you see here is the large version with a 3 1/8″ blade, an overall length of 7 1/2″ and a weight of 2.9 ounces. This is a nice size for an EDC knife. Not only is the Ripple lightweight at under 3 ounces, but it’s thin too. The whole knife is less than 5/16″ thick. Plenty of blade in a lightweight package. It’s a slim design that begs to be carried.

The blade is an attractive drop point design. There is an absence of the typical organic curves that Ken Onion is known for, but it still has his style and I find myself wanting for nothing. This is a really slender and refined blade and it comes with an exquisite tip. The swedge running 3/4 of the top of the blade is another elegant touch and the high hollow grind makes this a nice slicer as well. Personally, I love this blade shape.

CRKT has released this knife in several different steels over the years, but 8Cr14MoV is going to be the most common configuration. 8Cr14MoV has been discussed at length before, but this is a Chinese steel that is best known for being expensive, easy to sharpen, and holding an adequate edge. It’s on par with AUS-8, but below VG-10 and 154CM in the steel hierarchy. Feel free to check out my knife steel article for more information on different types of steel.

Handle, Ergonomics, and Pocket Clip

The handle of the Ripple is either made of 420J2 stainless steel (the framelock version) or aluminum (the linerlock version – shown here). The handle pieces have first been CNC milled with a ripple pattern. The handle has then been either a blue or black titanium nitride coating and then has been rubbed to reveal the silver look of the steel. It is a very unique look and can be difficult to capture in photographs although darkchild69, our featured photographer, has done an excellent job here. Another design element is the series of 44 small holes milled into the side of the handle. This is more for decoration I think, although it does lighten the handle up slightly. Finally, the handle is bolted together with two pillars. Very simple and as always, very easy to keep clean. This is a very slim handle and all the detail is unlike anything else currently on the market.

This is a thin metal handle so logic would suggest that this won’t be the most comfortable knife. In fact, the ergonomics are surprisingly good. The handle has been rounded and the flipper helps define the choil. Additionally, there is nice jimping on both the thumb ramp and handle. This provides plenty of traction and makes this a very easy knife to use for general tasks.

The clip is another interesting component. It is mounted high for tip down carry. It sits flush with the top of the handle and follows the line of the handle. One gripe is that the pocket clip it is tip-down right hand carry only. With the assisted open and the flipper, I can totally see why CRKT opted for tip down carry, but with 44 holes already in this knife, they really need to drill a couple more and make this clip ambidextrous.

Deployment and Lockup

The Ripple is a non-assisted open knife actuated by a flipper on the back of the handle. Those familiar with Ken Onion’s Leek, Chive, ZT 302, etc will be very familiar with this style of deployment. The flipper has been given some aggressive jimping that really bites into your thumb, you will not be slipping on this flipper. There are no thumb studs.

An interesting feature of the Ripple is the IKBS opening system. IKBS stands for “Ikoma Korth Bearing System” and means just that. There are a total of 16 ball bearings (8 per side of the blade). The bearings are uncaged and sit in little grooves machined into the handle and are used in place of teflon or phosphor bronze washers. Initial impressions are very good – the bearings make for a very fast and smooth deployment. This is one of the smoothest opening knives currently on the market (production blades at least). The IKBS combined with the assisted feature makes for effortless blade presentation. And apparently the bearings do not need much maintenance, which is good because I would not want to take this knife apart.

Here is an update from 2019: Over the past 8+ years I’ve owned countless bearing equipped knives. Generally they have held up real well. The versions with caged bearings are easier to take apart. This IKBS equipped knife includes loose bearings. You can take these knives apart too, but you need to be careful. Here is a great video from CRKT on how to clean an IKBS equipped knife.

The Ripple uses a steel frame lock, which is plenty strong for the kind of EDC tasks this knife was designed. Due to the intricate design on the handle you can hardly tell the framelock is there. I like how this looks and I also like how the framelock and adds to the simplicity of the design. However, I have noticed on multiple knives, the framelock extends very far over (see below) while others lock up early. Frame locks are designed to slowly break in and will travel over with extended use. Having the lock engage “late” from the start means that you may get less life out of the lock. If you get a Ripple with this late lock up, I would recommend talking with CRKT and getting it fixed because in my opinion, this shouldn’t happen with a new knife.

Here is a parting size comparison with my Boker Plus Urban Trapper:

CRKT Ripple Review – Final Thoughts

The Ripple is a beautiful knife. Ken Onion took a sexy blade shape and melded it with a wonderful handle. This knife “flows” from an aesthetic standpoint and I think the design is just phenomenal. The IKBS is both interesting and functional, long term testing will tell if this is a mere novelty or truly a revolutionary way to deploy a blade. The Ripple is made in Taiwan, which we now know (thanks to Spyderco) is capable of making some great higher end blades at a terrific value.

All things considered the CRKT did a great job with the Ripple. I would prefer if they re-worked the pocket clip so that it was ambidextrous, and a little less weird, but beyond that you get a lot of nice knife for the money. The Ripple is one of the knives that laid the foundation for Ken Onion / CRKT collaborations, and continues to be a great lightweight high value option for folks years after its original release.

CRKT Ripple EDC Folding Pocket Knife: Gentleman Everyday Carry, Satin Blade, IKBS Ball Bearing Pivot, Liner Lock, Textured Aluminum Handle, Pocket Clip K415KXP

Fast Opening: IKBS ball bearing pivot deploys the blade fast
Fast Opening: The flipper deploys the blade fast
Strong And Lightweight: Aluminum handle combines strength with minimal weight
Designed by Ken Onion in Kaneohe, Hawaii
Limited Lifetime Warranty covers any defects in materials or workmanship, see company site for details

I recommend buying the CRKT Ripple at Amazon or BladeHQ. Thanks for reading and Stay Sharp.

Benchmade Nimravus 140BK Review

by Dan Jackson Leave a Comment

Last Updated: July 26, 2019

The Benchmade Nimravus is one of Benchmade’s original fixed blade designs. It has stood the test of time and remains popular to this day. A “Nimravus” is an ancient cat with large teeth. I’d say that’s fitting when you consider this blade’s profile.

Buy the Benchmade Nimravus at BladeHQ

Buy on Amazon

Benchmade has offered the Nimravus in a number of blade steels and colors over the years. Today I’m checking out a 154CM version that has been blacked out completely.

General Dimensions and Blade Characteristics

The Nimravus has a blade length of 4.5″, a total length of 9.45″, weighs 6.2 ounces, and is made in America. This is a lightweight tactical fixed blade. Generally, a tactical fixed blade is going to be primarily used as a utility knife, but it needs to be able to serve in a defensive role as well. The Nimravus has the ability to flex into both of those roles. The 4.5″ blade gives you plenty of options. This knife will get plenty of work done, but can also be used as a martial blade if necessary.

The Nimravus comes both tanto and drop point versions, and you can get it with a plain edge or partially serrated. I opted for the drop point with partial serrations. Partial serrations can be handy for cutting rope and other fibrous materials, and it doesn’t dull as quickly as a plain edge, which can be helpful for use in the field when you may not have ready access to a knife sharpener.

My drop point blade has been given a high flat grind. The blade gets thin behind the edge, and this knife can assist with food prep, baton smaller pieces of wood, and take care of the myriad of small tasks that crop up in the out-of-doors. There is a partial swedge, that is mostly for decoration. The tip is fine and must be used carefully.

My blade has been coated in BK1, Benchmade’s proprietary poly-ceramic coating. BK1 is tough stuff, but it does show wear. Personally, I’m not a big fan of blade coatings, and would prefer to see Benchmade offer this knife in a stonewashed or satin finish. Especially since this knife is offered in stainless steel.

Speaking of stainless steel, my Nimravus came in 154CM. 154CM is the same workhorse steel that Benchmade uses on their Griptilian. It’s an excellent all-round steel, exhibiting good edge retention, corrosion resistance, and easy sharpening. This is a proven steel that is a good choice for this smaller fixed blade knife.

Handle and Ergonomics

The Nimravus is a full tang knife that has two hard-anodized aluminum handle scales. Handle construction is simple and neat. The scales are fastened to the handle with large torx hardware. Everything has been meticulously finished. The edges of the handle are chamferred and sit slightly proud of the aluminum scales. The scales themselves are deeply textured for traction.

This is a very grippy knife. The handle scales provide excellent grip, there is a large finger choil to keep the knife securely in hand, and there is a row of toothy jimping. I find the jimping too toothy without gloves. It digs into the pad of your thumb, and can be uncomfortable. Thankfully, the aluminum handles have been milled so you can hold the knife in a pinch grip. I find that to be more comfortable.

The balance point of the knife is right behind the finger choil. It gives the knife a neutral feel and hand and helps the Nimravus feel fast and balanced.

Rounding things out is a metal pommel with a hole for a lanyard. While it isn’t designed to be a glass breaker per se, this pommel could be used to break some glass or as an impact device.

Sheath

The Nimravus a sturdy nylon sheath with a kydex insert. The sheath offers several methods of attachment and you can remove various straps and connections to modify the knife as you like, however, I much prefer the optional kydex (hard plastic) sheath.

As far as nylon sheathes go this one is top notch, but the durability of the kydex sheath is hard to beat. Keep in mind that it’s a $40 option, which may seem pricey but I assure you that it is money well spent if you are going to seriously carry this knife. In a perfect world I’d like to see this come with the knife.

A final thing to note about the nylon sheath is that it comes MOLLE compatible. For those that use MOLLE (a system of attaching gear to yourself and your equipment) this is a nice feature that you don’t find with a lot of sheathes and it is worth taking a moment to mention.

Benchmade Nimravus Review – Final Thoughts

The Nimravus is a lightweight and capable knife that could fit the role of a large EDC or tactical blade. One thing that I may not have communicated through the review is the quality and level of fit and finish. This knife is well built. The blade is thinly ground, the balance is good, and the finish is everything you would expect from Benchmade. This is a durable blade and a convenient size to get real work done.

Here is the Nimravus next to my Ka-Bar BK-16, a more inexpensive tactical fixed blade:

It is lightweight enough to be a backup blade, but it’s got enough length on it that you could use it as a primary field knife or tactical option. For those seeking a piece of Benchmade history, or simply a good fixed blade knife, the Nimravus is well worth considering.

No products found.

If you would like to buy a Benchmade Nimravus, I recommend purchasing it at Amazon.com or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.