aluminum

Protech Newport Review

Pro-Tech isn’t always the first brand that comes to mind when knife collectors start talking about automatic knives. We often default to Microtech or perhaps Kershaw. This makes sense, both of these brands have a large market share in the industry. They also possess a large social media presence and are very conspicuous at the tradeshows.

Buy the Microtech Dirac at BladeHQ

However, I think any true knife enthusiast would be sorely remiss to not spend some time looking at Pro-Tech. I’ve owned several knives from Protech over the years, they are one of the few swing-blade automatic manufacturers that make lefty dedicated versions of their knives. (Note to knife brands: I’ll literally throw money at you if you make lefty dedicated versions of your knives. I always support lefty manufacturers.)

Pro-Tech is a US-based knife company based out of Southern California. Their knives are all made in small runs in order to give the company the time to put human hands on each knife going out of their doors. They have done some great collaborations with Strider, Emerson, and Les George to name a few. They primarily focus on automatics but do have several “normal opening” knives in their catalog. Protech is also known for its (with a grain of sand) custom knives. These generally take the form of an existing production model made with premium materials. Check out this custom they made for Nick Shabazz a couple of years back.

The ProTech Newport is what’s up for discussion today, let’s touch on some specs:

(All Measurements are my personal measurements and may differ from manufacturers specs)

Blade: 2.75”
Overall Length: 7”
Thickness: .62” with the clip
Blade Thickness: .1”
Steel: S35VN
Weight: 2.2oz
Lock: Button Lock Automatic

Blade Steel

First things first, the business end of any knife is the blade. The Protech Newport has a very aggressive drop point blade made out of thin S35VN. When considering this particular knife I think it’s important to keep in mind the intended use-case here. This is a gentleman’s folder, not a hard use EDC blade. You want this knife to be ground thin and constantly sharp so that it’ll sing through the envelopes on your desk; that is what Protech has achieved here. With my calipers I’m seeing a blade stock that’s just under a tenth of an inch thick. Once ground down to the edge this knife becomes a lightsaber. My secret plan is to see if I can get this blade reground even thinner, to a zero-edge after the review. I like my knives to scare me by simply existing.

The steel Protech chose for the Newport is Crucible legendary S35VN. There has been plenty written about S35VN over the years. Suffice to say that this is a good choice for a knife like this. It retains an edge well, resists rust and corrosion, and is easy to sharpen when needed.

Handle, Ergonomics, and Pocket Clip

The handle of the Newport is where it makes its intended purpose known. The slabs are made of anodized aluminum. The anodization has a “satin-y” texture to it providing the only grip surfaces on the knife. This just confirms in my mind that this is a more, “desk knife” than something you’d put into a hard use or tactical application. You’re going to open letters and packages with this knife.

Ergonomically the Newport sits well in hand. Protech has added a small palm swell in the handle that sits between my ring and pinky finger. This gives you a little bit more purchase on the knife when you’re working with it. The one thing to take into consideration is the size of the knife in general, I wear an L size glove and my hand occupies the entire handle. This combined with the lack of gimping would make me think twice about using this knife for any type of aggressive piercing tasks. I’d hate to run my hand onto that blade. As I said above, however; I think you’ll most likely be grabbing this knife for some pretty small jobs, so I wouldn’t sweat that too much.

The clip is excellent. It’s a deep carry clip with the fold terminating at the very end of the handle. What that means for you is the entire body the knife will sit inside your pocket. The Newport, being slim in profile already, is a good candidate for this. Plus, with it being an auto you may not want to draw attention to the knife in your pocket.

Speaking of which, here’s a shot of the Newport in the pocket:

Deployment and Lockup

The Newport is a traditional swing blade automatic. Protech describes it as having a “smooth and fast coil spring action.” To translate this, the knife fires hard and fast. You’ll want to brace your fingers against the clip and nestle the end of the handle into your palm when you activate it otherwise you may send this sucker flying. It kicks like a tiny little mule. This is a good thing, and it’s a ton of fun to play with, but when you hand the knife to your bud just make sure he knows what’s coming too.

Using the lock is simple: Press the button and close the blade. You’ll be pushing against the spring that fires the knife, so I always use two hands to close this one. The knife is solid in the open and closed position though, no play to be hand in the mechanism.

Competitive Options

There are a couple of other options that come to mind if maybe the Newport doesn’t tickle your fancy:

The first one that I can think of is the Boker Kalashnikov. More of a heavy-duty knife with the Boker’s spear point blade. MUCH cheaper, but with that costs savings will come quality differences.

Next, you might consider Kershaw Launch 1. It’s a little larger, a tiny bit cheaper, and totally different styling. Kershaw doesn’t make a dedicated lefty version but it does have a reversible clip. You’ll still have black aluminum handles and a push-button lock. This could be a good option for you.

The last option that pops into my head is the Hogue Knives EX-AO1. These knives are a little bigger overall but roughly the same price as the Newport. You may just want something that fills your hand better and Hogue makes an excellent auto.

Protech Newport Review – Final Thoughts

So to wrap up… I love Protech’s offerings, they are a US company that does all their small-batch manufacturing in southern California. Their knives are quality and have their own style to them that’s undeniably Protech. The Newport specifically fits the bill for a “gentleman’s auto,” or a “light duty desk knife” for me. It’s also an EXCELLENT fidget toy when I’m working at my desk. If you keep the intended use of a knife like this in mind I don’t think you’ll be displeased with the Newport.

The Protech Newport is available in several different handle configurations, coated and uncoated blades, and a couple of really premium options that involve inlays. You should be able to find something that suits your taste in their catalog.

Pro-Tech Newport – From $164.95
From: BladeHQ

Editor: I recommend purchasing the Protech Newport at BladeHQ. Thank you for reading.

Gerber 06 Auto Review

by Dan Jackson 4 Comments

The Gerber 06 Auto has always struck me as a stand out piece for Gerber. A well worn trope in knife reviewing is to bag on Gerber for their decline from an American standard to a mass market, Wal-Mart oriented, overseas produced stuffed shirt of a brand.

Buy the Gerber 06 Auto at BladeHQ

The poster child for that era of corner cutting was their plastic handled Bear Gryles Parang that would break in half if you tried to use it. I’m not sure you could even saber open a bottle of Dom with it on the hotel pool deck, much to Bear’s chagrin. If there ever was a rock bottom for Gerber, that was it.

The 06 Auto is a standout for the brand because it is USA made piece geared towards military and law enforcement instead of mall ninjas and glampers. It’s an automatic knife, so federal law forced Gerber’s corporate overlords to produce the 06 in the USA. The bean counters were pissed when they realized this, and groused about the diminished margins. But enthusiasts have referred to the USA made 06 as a “happy accident”, because the resulting knife was not an orange plastic encased turd best known for its propensity to break in half. Imagine that!

In the past few years Geber has attempted a turn around. Knives like the Fastball have shown the company is committed to making high quality blades again, but the 06 has been around for 10 years. In fact, the 06 I have here happens to be the 10 Year Anniversary variant with an OD green handle. It’s high time we check this modern classic out.

General Dimensions and Blade Details

The 06 Auto has an overall length of 8.625″, a 3.625″ blade, weighs 7.14 ounces and is made in the good ole USA. This is a full size knife with a similar footprint to my Strider SnG or Spyderco Paramilitary 2, but it’s about twice the weight thanks to a thick blade, full steel liners under aluminum handles, and a chunky steel backspacer. It’s not my top choice for an urban EDC knife, but if you are looking for a heavy duty piece this 06 feels like it can be used to bust through cinder blocks.

Here is a size comparison with a Spyderco Delica and an Endura. All in green!

The blade is a handsome traditional drop point, with a saber flat grind and a long swedge. The blade of my 10th anniversary edition has been given a simple stonewashed finish, but generally the 06 comes with a flat black blade coating. The grinds are clean and even and the edge has been neatly applied, the last 1/8th of an inch at the heel is unsharpened for some reason. I’m not a fan of that as I find material can get hung up on the unsharpened portion. I suppose that could be ground out, but would prefer to see the edge completely sharp all the way to the heel straight out of the box.

Gerber runs S30V steel on their O6s these days. I have no real issue with S30V. It’s a fine steel that gets the job done, although these days there are more exotic steels available. Depending on the heat treat S30V can be stubborn to sharpen. I found that this 06 is easy enough to touch up on my Spyderco Goldenstone, so that’s good. No issues with rust or corrosion so far.

I’ve used this 06 a bit. It doesn’t leave the house much, as I prefer to carry smaller lighter knives when I’m on the go, but I’ve carried it around the house and neighborhood, and used it on many cardboard boxes. It’s an effective box cutter, tracking smooth cuts through cardboard and other packing materials. It also whittles well, peeling off long thin strips of wood and bark. It’s also a stout blade that should hold up well in harder use cases. I think it would be a good choice as folding camp knife.

Handle, Ergonomics, and Pocket Clip

As I mentioned before, this knife comes with hard anodized aluminum scales over full steel liners and a thick steel backspacer. All the hardware has been given a black oxidized finish. This Ten Year Anniversary edition comes with OD green handles. I find that to be fun and a nice change of pace from the blacked out regular edition. Some of the finish is a little crude, most notably the tool marks on the backspacer, but the parts all fit together nicely. It’s a solid and well made handle.

You can also see Gerber went through the trouble of skeletonizing the steel liners. The big honking backspacer also provides room for a lanyard hole and an “impact tool”. As far as impact tools go, this 06 Automatic means business. I would not want to get hit with this thing.

The ergonomics of this knife are quite good. The handle is generous and can accommodate larger hands and gloved hands. The anodized handles offer a little texture without being abrasive. There is some millwork in the handle for extra traction, but it seems that the 06 benefits the most from its simple and large handle shape. The knife is a little pommel heavy, and I find the most balanced grip is when I am choking back on the handle. However if you decide to choke up, the flared handle shape prevents your fingers from slipping forward. All in all this is a comfortable handle that should work well for most people.

The pocket clip is large, and doesn’t provide for particularly deep carry. A good inch or so sticks out, which makes the knife easy to retrieve, but not super discreet. The pocket clip is secure with good spring retention. That is essential for a heavy knife like this.

Here is your in the pocket shot:

In practice I found the 06 to be a large and somewhat cumbersome knife to carry. If you are used to a heavy load out then the 06 is just another day at the office, but if you regularly carry a Dragonfly 2 or Mini Bugout like I do, then the 06 will take some getting used to. No surprise there, the knife is over 7 ounces.

Deployment and Lockup

Now for the fun part. As you know, the Gerber 06 is a push button automatic. The coil spring inside the handle is strong and snappy. It has no problem propelling the blade out. Gerber has also included a large safety button, or safety slide, that will lock the blade open or closed. Most safetys are fiddly and detract from the knife. The safety on the 06 actually enhances the experience. It’s surprisingly satisfying to use. It’s large and takes a purposeful amount of force to manipulate. I have yet to accidentally manipulate the safety. I don’t mind it at all on this knife.

For lockup the 06 comes equipped with a button lock. This is a robust locking mechanism, and the safety slide allows you to lock the knife open if you choose. I like button locks in generally, and think the button lock here is pretty good. The blade is secure although there is a small amount of side to side play. No up and down play. When it’s time to disengage the lock, an appropriate amount of force is required. There is no stickiness in the lock. It’s good. No complaints here.

Here is a parting size comparison with my Strider SnG. I still enjoy this knife, and imagine it’s a collectible at this point. I thought it would make for a cool size comparison.

Blade centering is good on my knife. I’d say it’s off by a hair, but is still good enough for government work.

Gerber 06 Auto Review – Final Thoughts

The 06 Auto has been on my radar for as long as it has been in production. It has that universal cool, and is a strong departure from Gerber’s standard stuff. It’s handsome, rugged, and overbuilt. Who wouldn’t want one?

Well, an argument against the 06 is it’s a heavy duty tool. If you are a normal person, you could carry one for the novelty, but I think you will find that it’s overkill for most EDC use cases. Certainly if you are in law enforcement, military, or have a reason to carry a heavy duty piece like this, then the 06 is a great choice. But if your typical carry is an ultralight EDC knife, then the 06 Auto will get old fast.

With those caveats aside I can recommend the 06 Auto. It’s a robust knife and it shows what Gerber is capable of if they put their minds to it. It’s a quality piece, and I’d love to see them riff on this design and offer lighter and maybe even non-automatic variants. More “happy accidents” please, and less orange plastic.

Gerber 06 Auto – From $169.00
From: BladeHQ

Editor: I recommend purchasing the Gerber 06 Auto at BladeHQ. Thank you for reading.

Gerber Ayako Review

by Travis Pike 3 Comments

I’m a sucker for cool-looking knives. Not impractical fantasy knives, but practical knives that have a cool look to them. That’s why knives like the Gerber Flatiron and now the Ayako. I’m a sucker for budget-friendly knives that have a unique style and grace to them. The Ayako, as the name implies, has a Japanese styling to it. Not to sound like a weeb, but the katana like inspiration makes this an eye-catching knife.

Buy the Gerber Tri Tip at BladeHQ
Buy on Amazon

The swept-back blade with a forward-positioned belly makes this look like some form of mini katana. Call it the influence of Ghosts of Tsushima, but I really dig the vibe of the Ayako, and that’s what caught my eye at my local Academy Sports and Outdoors. I’ve been carrying the 30ish dollar knife for about two weeks now, and while it won’t be my main go-to for an EDC knife, I appreciate a budget-friendly option.

It’s easy to get lost in the snobbery when you carry a Hoback or a Micro-Tech. Budget-friendly blades have a rightful place and are the most bought blades, so they deserve some love when they can deliver performance above their price tag.

General Dimensions and Blade Details

The Ayako has a 3.5-inch long blade with a 3.625-inch cutting edge. That rounded edge near the tip of the blade gives you a little more cutting edge than the blade’s length offers. The handle is 4.625 inches long, and the blade has an overall length of 8.1 inches. The Ayako weighs 3.8 ounces, so it’s relatively light and comfortable for daily carry.

The blade seems to be half tanto half sheep’s foot tip. It’s not exceptionally pointy like a tanto, but it’s not as tip reduced as a sheep‘s foot. The belly like area near the tip of the blade gives good traction if you want to go deep on your initial cut. For a sword, that’s probably a great trait when you have to fight a Khan invader. On a knife, it allows me to cut through tomatoes quite quickly and dig into thick materials efficiently.

The slightly swept-back blade is only slightly curved and seems to follow the tip into deep cuts rather well. The blade is made from the pain in the butt to type 7Cr17MoV stainless steel. 7Cr is a Chinese made stainless steel that is relatively cheap.

The corrosion resistance is high, which is excellent, and as stainless steel, this is one of the more defining features of 7Cr. 7Cr is also an easy to sharpen steel, and that’s important because you’ll be sharpening it a fair bit as the edge dulls quickly. In my two weeks or so of use, it hasn’t be pressed into hard service by any means. I’ve cut up a lot of cardboard as I disposed of a ton of Amazon boxes during the Christmas rush and put it towards most of my daily knife tasks.

Gerber barely seems to sharpen it before it heads out the door, and it seems to dull rather quickly. It’s low-end steel, but I’ve had low-end steels hold a better edge than this. The edge itself can get decently sharp with a whetstone. Sharp enough to slice and dice cardboard, zip ties, chicken, tomatoes, and even an onion or two with relative ease. It hangs up a bit with cardboard but will still make it through when pressed.

I wish it had more to the tip, especially when cutting the zip ties that held the portions of a bike in a box. It worked, eventually, but more of a point would help with basic tasks.

Handle, Ergonomics, and Carry

One side of the handle is an aluminum scale, and the other is a stainless steel scale. Both are checkered and marked, but it’s not overt checkering. It’s subdued and likely wouldn’t cling tight to your hand under stress. The knife has never slipped in my grip, but the checkering is nowhere near what something like G10 offers. You can grip it tight and still pull it out of your hand with little resistance.

The handle is plenty comfortable, and it does allow you to cling to it without much discomfort. The grip is nice and long and seems to fit my big hands well. It’s thin but functional and comfortable. The shape is well done and allows for intuitive blade manipulation.

The grip is thin, and my main complaint about it would be the pocket clip location. It’s a big clip on a svelte design. I almost wish the knife didn’t have a pocket clip; it feels like it ruins the smooth lines of the grip.

You can remove the pocket clip, but you can’t move its location. You are stuck with the blade in a tip-down carry position with the clip on the right-hand side of the knife. It clings tightly to your pocket though and doesn’t budge when you move.

Deployment and Lockup

The Ayako has two means to deploy the blade. The first is via a flipper that extends past the body of the blade and is part of the blade. The second is a thumb hole in the blade. Neither is a means to quickly deploy the blade. The flipper allows for one-handed manipulations, but it’s not going to fly out in a hurry and takes a deliberate motion to deploy the blade.

The thumb hole is nearly useless and very small when the blade is closed. It’s such a small little slot that my monkey fingers have a hard time reaching into it and using it. If my nails are trimmed, it’s useless.

Once deployed, the stainless steel liner lock seems to do a good job of pinning the blade open. The liner lock is part of the rear grip scale, so your own grip keeps the blade pinned open. Once the liner lock is engaged, the Ayako’s blade is locked in place and seemingly won’t move or budge even a bit. A cut in the front grip scale makes it easy to depress the liner lock and close the blade with ease.

Gerber Ayako Review – Final Thoughts

The Ayako is a little bit more than a pretty face. It’s a decent little EDC knife. The solid lockup and decent blade design make it well suited for EDC tasks. If the knife was more expensive, I’d be more critical of the 7Cr steel and how fast it dulls. Knives like the Flatiron are about the same price but featured a much worse grind than the Ayako.

The Ayako is a solid little knife for the money. It won’t win any awards, and it’s not exceptional in any way. The most redeeming qualities are its price and attractive appearance. Behind the pretty face is a knife that cuts and claws as it should, but it doesn’t do much else. I don’t regret my purchase, but I’m betting the Ayako is a knife I put in my knife box for a long stay or eventually give away. Speaking of, with Christmas around the corner, its a great budget based gift, especially for a young man or woman in need of a knife they can abuse, break or lose.

Sale

Gerber Gear 31-003729 Ayako Folding Knife, Pocket knife with Clip, EDC Knife, Silver, Stainless Steel

The Ayako pocket knife is modern take on a classic Japanese designed friction folder EDC
The EDC knife features dual deployment options: a nail nick hole, as well as an extended tang front flip
Featuring a fully fine edge 3.5 Inch, Japanese style tanto blade of 7Cr17MoV
Frame Lock for easy one-hand closing for EDC
Handle scales of coined aluminum, and stainless steel with Frame Lock for easy one-hand closing

Editor: I recommend purchasing the Gerber Ayako at BladeHQ or Amazon. Thank you for reading.

CRKT Provoke Review

by Dan Jackson Leave a Comment

Where to begin with the CRKT Provoke? This is a knife that defies convention, and it hardly relates to any other knife that has crossed my desk.

Buy the CRK Provoke at BladeHQ
No products found.

If I were to draw a comparison to a knife in my collection, the Provoke most reminds me of the HALO VI. Not so much from a nuts and bolts standpoint, but from the standpoint of how this knife makes you feel. It’s an entirely unreasonable pocket knife, and that’s why I’m drawn to it.

Of course all things have their origin, and the Provoke is no different. The Provoke is a production version of Joe Caswell’s Morphing Karambit. Joe is well known for his innovative and robust designs. His EDX is a good example of his over engineered design philosophy distilled into a more traditional folding knife pattern. The Morphing Karambit takes the idea to an entirely different level, linking the traditional Karambit pattern with a novel design that allows you to deploy the blade with the forward push of your finger.

Like the HALO VI I can only describe it as a “serious piece of hardware”. It is satisfies in a way that something like a Spyderco Delica or Benchmade Griptilian could never dream of.

CRKT’s decision to work with Joe to bring this knife to the mass market was bold and admirable. But CRKT is known for its more budget oriented offerings, and the original Morphing Karambit retails for $650. CRKT’s version comes retails in the $200 range. Much more palatable, but not a cheap knife by any stretch of the imagination. Does it make the grade? I’ll attempt to answer that question as I explore this highly unique offering.

General Dimensions and Blade Details

The Provoke has an overall length of 7.37″, a 2.41″ blade, weighs 6.1 ounces, and is made in Taiwan. As I mentioned in the intro, this is a hefty piece of hardware. Few knives have the substance, the gravitas, of the Provoke. This is a heavy hitter. It is thic with 3 c’s, as the youths are saying. Purportedly saying, as I am no longer a youth. I am reminded of that as I watch the youths walk the window of my office as the shadows lengthen and the earth goes cold. Regardless, it’s a thick knife. 1.25 inches thick according to BladeHQ.

And at 6.1 ounces you feel it in the hand. It’s not an EDC. At least not for me. But not all knives should be a featherweight EDC. That would be boring. And the Provoke is definitely not boring. Here is a size comparison with a Delica and Endura:

The blade is a chisel ground hawkbill shape. Hawkbills are common on karambits. Chisel grinds may be less common, but here we are working with over 5mm of D2 steel. It tapers out as you reach the tip, and it gives the knife a little symmetry. I will note that the actual edge is V ground. I think that was a good idea as in practice it helps this thick chisel ground blade track through material when cutting.

Speaking of cutting, I have had the chance to do a fair amount of work with this knife. The curve of the blade accelerates materials into the cut. It makes quick work of cardboard. From a utility standpoint, I think cardboard is where this knife excels. The thick blade makes it less effective for food prep. It can cut rope and fabric, and the fine tip works well for the modern equivalent of cutting coupons, but the curved handle and blade allow you to rake long cuts through cardboard. The entire knife has been given a titanium nitride coating, and so far it is held up well. I haven’t tested the knife in any martial capacity, but assume it would perform alright in the hands of a skilled martial artist.

I think D2 was a decent choice for blade steel. It’s a tough semi-stainless steel. It’s less expensive but still gets the job done. Certainly there are better steels on the market, but I am not convinced a knife like this really “needs” to come in a super steel. Since the blade has been coated you don’t need to worry about rust, and in practice the heat treat on this is pretty good. It holds a nice, durable edge, and I am able to keep it touched up on my Sharpmaker, Golden Stone, or any other rod style sharpener.

Handle, Ergonomics, and Pocket Clip

The handle is made from 3 pieces of aluminum. You have the main part of the handle, and then 2 smaller aluminum links that connect the handle to the blade. All the pieces are bolted together and given the same black coating as the handle. In practice the handle construction is impressive. It’s solid and heavy. All the parts are nicely finished and everything lines up as it should. Excellent fit and finish on this piece.

For such an unconventional design, this Provoke feels surprisingly good in hand. I suppose this is due in part to the karambit design. Karambits provide plenty of room for your hand thanks to the short blade relative to the handle and the ring. I am able to stretch out and get a good grip. And although there are a few moving parts, none of them are sharp where your fingers go in both a forwards and reverse grip. So while it doesn’t look comfortable, it is. This is a testament to Joe Caswell’s remarkable design.

Let’s talk about the pocket clip. This is another highly unusual element of the knife. It is the only park that isn’t black, offering some contrast to the design. The clip curves all the way around the ring of the karambit and sits flush with the handle. You have to press the textured area on the pommel to push the pocket clip up and provide room to slide it into the pocket.

It’s an usual design but it works well, holding the Provoke securely in place, and providing you with a decently deep and discreet method of carry. Given the unusual shape of the clip it doesn’t really read like a pocket clip to me. Here’s your pocket shot:

Of course at 6+ ounces, you will feel this knife if you decide to carry it daily. But for what it is, I think the Provoke carries well.

Deployment and Lockup

This is another point in the review where the Provoke colors outside the lines of conventional folding knife design. Rather than a thumb stud, or flipper tab, or blade hole, you nudge the blade open with your thumb. CRKT calls this their “Kinematic” system but it doesn’t really matter. If you are reading this review you likely are already aware of how the knife works. It’s difficult to describe so I’ll provide some pictures.

Knife junkies will need a cigarette after deploying this blade. There is a ballistic quality to this knife, and you don’t so much open the blade as you launch it. It’s a singularly satisfying experience let down only by the comparatively clunky method of unlocking the blade and bringing it back to closed position.

To unlock the blade you have to push a small tab near the ring. That frees the links to retreat to their closed position. It works well, but like most folders, it isn’t as fun as kicking the blade open.

I’ve been playing around with this knife for months. It lived at my office for a while, and I took it home to test it around the house and put the review together. I’ve opened and closed it hundreds if not thousands of times. It has worked flawlessly for me. Granted, I didn’t skin a hog with this knife, or take it out to the desert for a week, but I’ve used it and it has held up well.

Here is a parting size comparison with the Zero Tolerance 0350:

CRKT Provoke Review – Final Thoughts

I recall when Joe Caswell first introduced the Morphing Karambit as a Kickstarter Project. I was instantly intrigued, and know a lot of folks were. I believe our own Grayson Parker owns one of the Morphing Karambits and may eventually review it. It’s a design that is too unique to ignore. But at $450 it might be a little too expensive for most people to buy. I know the price was a hurdle for me personally.

So the idea of CRKT making a more approachable version of the knife appealed to me, and CRKT has a good track record of executing custom designs. At $200 CRKT’s version is still not cheap, but people are buying it. I see that it has over 500 reviews on Amazon, which is impressive for a niche product like this.

I don’t typically comment on Amazon reviews, but I found it interesting that some people on Amazon are disappointed with the Provoke stating “there are better options out there” for an EDC knife. No shit? This is a highly unusual design. It’s not going to replace a Delica or Griptilian. If you are buying this as your primary EDC knife be prepared to make many compromises. This should not be your first knife. It probably shouldn’t be your 10th if you are building a collection of users. It’s heavy and impractical as an EDC tool, but it’s an amazing design that has been well executed.

I think if you like the design you will like the knife. In my mind it’s more of a collectible or a design object than an every day carry piece, but it is 100% functional. CRKT did a great job bringing Caswell’s vision to the masses. I really dig the Provoke, and it will have a special place in my collection.

CRKT Provoke Kinematic EDC Folding Pocket Knife: Morphing Karambit, D2 Blade Steel, Kinematic Pivot Action, Integrated Safety Lock, Low Profile Pocket Clip 4040

Unique Innovation: Kinematic deploys the blade with push of the thumb
Superior Performance: D2 blade steel for excellent edge retention
Strong And Lightweight: Aluminum handle combines strength with minimal weight
Designed by Joe Caswell in Newbury Park, California
Limited Lifetime Warranty covers any defects in materials or workmanship, see company site for details

Editor: I recommend purchasing the CRKT Provoke at BladeHQ or Amazon Thank you very much.

Gerber Tri-Tip Review

by Travis Pike 1 Comment

I like weird stuff in general, and that extends to my knife collection. The good news is knives can get really weird. I now have three cleavers that have been produced by companies who don’t specialize in kitchen utensils. My ESEE cleaver, my Gerber Flat Iron, and now a second Gerber, the Gerber Tri-Tip mini cleaver knife, make up my collection.

Buy the Gerber Tri Tip at BladeHQ
Buy on Amazon

Gerber is a broad brand when it comes to knives. They can range from quite lovely and rather expensive, to remarkably affordable. The Tri-Tip leans more to the affordable side. It includes a molded polymer sheath and admittedly has a very fresh look. The Tri-Tip is a pretty blade, and I can’t lie when I say its looks drew me to it more than any specific need for a mini cleaver. I’m a real sucker for a pretty blade, and the Tri-Tip is a rather attractive and stout little knife.

General Dimensions and Blade Details

The Gerber Tri-Tip has a 2.875-inch cleaver blade is divided into a chisel edge and a cutting edge. The chisel edge is about an inch long, not very sharp, and it is finger safe. The bottom cutting edge is the near 3-inch blade. The handle is 2.75 inches long, and the whole thing weighs a mere 3 ounces. It is a full tang knife with a set of grips attached.

The blade is made from 7Cr17MoV. This cheap stainless steel that’s very popular for budget based knives. It’s quite common in affordable hunting and camping knives and even kitchen knives. The Tri-Tip fits that description nearly perfectly. It’s a budget based blade optimized for camping kitchen chores. This steel does offer excellent corrosion resistance, is easy to sharpen, and for low-end steel tends to hold an edge okay.

Edge retention is somewhat questionable, and it’s not one that lasts long. The good news is that as a cleaver, the blade isn’t always tasked with tradition cutting tasks, so the edge lasts longer than I thought. This steel isn’t known for being tough, but I’m not batoning wood or striking a fire rod for cleaver tasks.

Its edge is good enough to cut through meat and veggies easily, and even thin bones with a little strike to the rear of the blade. It’s not as sharp as any ZT or Emerson, but it’ll do its job as a 30 dollar cleaver. The small blade length offers a solid cutting edge due to the knife’s aggressive belly. You can cut through thick meat and chop vegetables rather well.

Admittedly the use of such a small cleaver is somewhat niche. I can see it as a functional camping cooking utensil that takes up very little room and weighs very little. With sustenance camping becoming more popular, I see the Tri-Tip being a handy tool for cleaning up squirrel, rabbits, and deer. The small blade won’t chop through the thicker bones of medium-sized game, but it quickly eats through chicken bones.

The chisel edge acts as a useful bench scraper to collect ingredients with ease after slicing and dicing them. The edge could also serve as a pry tool or even a stripping tool to remove bark from branches.

Handle and Ergonomics

The little 2.75-inch handle doesn’t necessarily fill the hand and won’t give you the real cleaver’s wacking ability. The grip angle has a slight incline that allows for a rocking motion to cleave through meat. The handles are made from aluminum and textured.

The downside is that there are some immediate hotspots in the area where the handles meet the palm. Using the cleaver to strip meat from bones creates hot spots throughout the hand. Using the Tri-Tip in traditional kitchen tasks was comfortable enough. Giving the black a wack, rocking it back and forth, and using the chisel edge was all plenty comfortable.

The handle is textured comfortably, and you can get a sure grip, which was surprising due to how small the grip is. I like the rounded aluminum grips and the texture they add, but they were far from perfect.

Once you turn to more outdoorsy tasks, you’ll want a larger, more prominent handle. The lightweight design is appreciated, and at only 3 ounces, it won’t pull on you when belt-mounted.

The rear of the blade is wide enough to cover with a towel and give a wack to break through thick veggies and small animal bones. You can split a chicken breast, but anything more significant might prove to be a challenge.

Sheath

The included molded polymer sheath is a high point in the Tri-Tip design. It’s mostly a simple, rectangular shape that fits 1.5-inch belts. The sheath is quite sturdy and well designed. The Tri-Tip sheath is outfitted with an active retention device. To defeat the device, you merely press down a small spring-loaded toggle and pull the blade out.

Tri-Tip slides in and out of the sheath with ease and allows you to dismount and mount the knife quickly. It’s a neat design that seems like it would be more at home on a more expensive knife. The included sheath can be worn on the right or left side, or even in a scout position. Scout being the fancy name for wearing it upside down on a plate carrier or pack strap.

While I haven’t tried to modify the sheath, it seems possible to attach a variety of clip options and change how it’s mounted. With different belt clip options, it looks like a great candidate for horizontal carry should you wish for such a thing.

Gerber Tri-Tip Review – Final Thoughts

The Tri-Tip is a neat mini cleaver. It looks and feels cool. The aluminum grips are fantastic, as is the included sheath is quite nice. I like the Tri-Tip, and I say that because I can’t find a use for it. If you wanted to kill a squirrel and clean it in the woods, then here you go. The Tri-Tip is perfect for that role. I could do the same with a dozen other essential fixed blade knives and have a more useful tool overall.

With that said, I think the knife has a powerful cool factor that makes me a fan. For the low price, I don’t mind buying it for the giggle factor.

Sale

Gerber Gear TRI-Tip Mini Cleaver Fixed Blade Camping Knife with Molle Sheath for Survival and Bushcrafting, Green

DURABLE CAMPING GEAR: At home on the trail or in camp, the Gerber TRI-Tip mini cleaver camping knife's standout design rewrites what an outdoor cooking knife can do, perfect for outdoor enthusiasts
INNOVATIVE DESIGN: The cleaver blade is not only eye-catching with its black oxide coating but serves as both a scraper tool and a cutting tool, making it a versatile camping cooking utensil
QUALITY CRAFTED: The machined aluminum handle scales provide an excellent grip and a balanced contrast of color to the knife
COMPACT AND CONVENIENT: The multi-mount knife sheath can be carried in two positions: tip down or horizontal SCOUT carry and a lanyard hole is integrated into the handle as an additional place to secure the knife
VERSATILE APPLICATIONS: This fixed blade knife is ideal for various camping, hunting and outdoor activities, offering the functionality of multiple utility knives in one tool

Editor: I recommend purchasing the Gerber Tri Tip at BladeHQ or Amazon. Thank you for reading.

Victorinox Hunter Pro Alox Review

by Dan Jackson 8 Comments

The term “Swiss Army Knife” conjures up a certain image. It’s arguably the most universally recognizable pocket knife, spanning the gulf between lay person and hardcore knife enthusiast. These knives are universally popular in part because they are universally useful. Sure, the models with 20+ tools begin to border on the absurd. Fun, but maybe not functional. But models like the Cadet and Pioneer can be appreciated by the collector and average person alike.

Buy the Victorinox Alox Hunter at BladeHQ
Buy on Amazon

And for many these will be the first knives they handle. Whether it was quietly taken from dad’s bureau on a long summer afternoon, or openly handed around the camp fire in Boy Scouts, the SAK conjures up all manner of nostalgia.

In many ways it’s that standard Swiss Army Knife formula that makes these endearing. They haven’t changed a whole lot since childhood. Little pill shaped handles housing tools we have come to know and love. The penknife, the bottle opener, the nail file, the tweezers and tooth pick. They follow us along through life and settle comfortably into a shelf on the closet, or in a desk drawer, for our own children to eventually discover. It’s a virtuous cycle, and not a terrible business model either.

Victorinox has made small innovations over the years, but the designs remain largely unchanged. The Hunter Pro Alox is a significant departure from the pill shaped slip joints. It’s a big knife with a single blade. It comes with an ergonomic handle, a back lock, and pocket clip. It may seem trivial to you and me, but this is something of a big deal to a company whose product has remained mostly unchanged for over 100 years.

The question is whether the Hunter Pro is truly something significant. Does it mark a change in how we think of Swiss Army Knives? Or is it merely a novelty? This knife was provided to me by Victorinox free of charge. All thoughts are my own.

General Dimensions and Blade Details

The Hunter Pro Alox has an overall length of 8.875″, a 3.875″ blade, weighs 6.25 ounces, and is made in Switzerland. This is a large folding knife. Not just for Victorinox, but for any company with the exception of Cold Steel. I was puzzled by the purpose of this knife. Puzzled to the point where I had to look to the company’s literature to understand what they were aiming for with this piece. According to Victorinox, this is a “cross-over” between an outdoors knife and an urban EDC. I don’t know.

Here’s a size comparison with the Spyderco Endura. Sorry for the blown out picture, and the dark pictures on this review. Was playing around with the camera settings and it was not a particularly good idea.

The knife is massive, which doesn’t necessarily bother me, but the weight of it is distracting. Admittedly I have the Alox version, which is the heaviest. Victorinox also offers the Hunter Pro with walnut handle covers or plastic handle covers. Either one of those shaves about 3/4 of an ounce off the weight. The Hunter Pro could be a fun choice for a camp or hunting knife, but this ain’t no EDC. Not in my book at least.

The blade is a near 4″ drop point. It curves gracefully like a whale, lending a utilitarian vibe to what may otherwise be considered a big freaking knife. This gentle giant has been designed for utility. There is a saber grind, and small swedge. The entire blade has been given a matte bead blasted finish. The Victorinox logo and “Swiss Made” have been engraved into the blade.

I am unsure on the blade steel for the Pro Hunter. Presumably it’s the same stuff used in their other knives. So far it has proven to be servicable. It takes a fine edge, holds it for a decent amount of time, and is easy to sharpen with a ceramic rod. Victorinox also offers the Pro Hunter with a Damasteel blade as part of a limited edition release they did for 2020. This limited edition is retailing for $400, so I’m not sure how many of those you will see in the wild.

In practice I’ve used my knife on cardboard and some light food prep. It’s starting to get hot in Florida, and most of my time outdoors has been spent on my bicycle, or mowing the lawn. Can’t say there have been many camp fires since the temps breached 90 degrees. And that may be where the Pro Hunter really belongs: at a camp site dicing root vegetables, and sharpening sticks.

The name “Pro Hunter” implies that this would be a choice for dressing game. Alas I’m not much of a hunter, and haven’t had the chance to butcher anything with it besides a bag of bacon. It creates lardons with the best of them.

Handle, Ergonomics, and Pocket Clip

The Pro Hunter Alox has full steel liners, aluminum handle scales, and a solid steel backspacer. The closed length is almost 5.5 inches, so that’s a lot of material and a lot of weight. But everything has been nicely finished. All the parts line up neatly, and the Hunter Pro feels well made. The bright aluminum handle and jaunty bias to the Victorinox cross give it an almost ceremonial appearance. As if this knife could be used at a coronation… or perhaps a circumcision.

One nitpick is that the handle is riveted together. That’s fine for a $30 knife, but given the price tag of this model hovers around a hundo, I’d like a knife that can be disassembled and cleaned. Especially if it’s geared towards hunting.

The Pro Hunter feels cool and comfortable in hand. The edges of the alox handles are rounded, and even though there are a series of finger depressions, there are no hot spots to speak of. And there is no lack of room on this oversize handle either. For traction, you have the signature Alox pattern on the sides of the handle, and a short run of mild jimping on the spine of the blade. Aluminum has never been considered a high traction material, and this knife is not a paragon of traction, but for normal use I found it comfortable. Wood or plastic would be a good choice for outdoor use, but the nice thing about this bright red handle is that you won’t lose it on the forest floor.

This is the first Swiss Army Knife that I have seen with a factory pocket clip, and Victorinox appears to have put a lot of thought and energy into it. This is right side, tip up only deep carry clip. It’s large, and I think that was necessary given how hefty the knife is. The clip’s spring tension is good, and the knife is held in place, but this is a knife that you will notice in the pocket. I’ve never been a belt and suspenders guy, but the Pro Hunter has me thinking about it.

This is a somewhat discreet knife in the pocket. The knife buries completely, but the large pocket clip stands out next to denim. Here is you in the pocket shot:

Deployment and Lockup

You get 2 choices with the Pro Hunter: a thumb hole or nothing. I opted for “nothing”, and the result is a 2 hand opener. It’s an easy knife to open with two hands. There is an expanse of blade flat to grab onto and a mild back spring, so it doesn’t need a nail nick. The thumb hole version is more practical, but this version works too. The two hand opening might make it legal in certain countries. The action is fluid, and there appear to be some washers inside the knife.

The Pro Hunter uses a lock back to lock the blade in place. The lock works well. The spring retention is strong enough to keep the knife from opening by gravity, but the blade opens with a satisfying clack. The lock up is rock solid. No blade play at all in any direction. Disengaging the lock is easy enough. Everything works as it should and feels good.

Here is a parting size comparison with a more traditional SAK. This is the new 93mm Alox Farmer X:

Blade centering is perfect. Rounding things out is a large slotted lanyard hole.

Victorinox Pro Hunter Alox Review – Final Thoughts

The Pro Hunter Alox doesn’t quite work for me. On one hand, it’s well made and functional. Victorinox has always made a nice knife, and this Pro Hunter is well made. The red aluminum handles are striking, the fit and finish is excellent, and everything works as advertised. The pocket clip and lock back are both well done.

The problem is the knife is way too heavy. Maybe if they ditched the liners, thinned the blade, and re-worked the steel backstrap you would have something that could cross-over between outdoor use and Urban EDC without pulling your pants off. As it stands the Pro Hunter strikes me as an oddity in my collection. Large and heavy, which makes it less practical. I hope it won’t stop Victorinox from attempting to innovate, but it doesn’t entirely feel like a step forward for the brand.

Victorinox Hunter Pro M Alox Folding Knife Red Aluminium Handle - Red

Compact and Sleek: The Hunter Pro Alox is the sleek and handy every day carry for the modern man
Versatile: Its iconic design and perfect form combined with the sturdy blade make it the ideal cross-over from the outdoors to the urban jungle
Durable: The standout feature is the hugely popular Alox scales, known and loved for their durability
Other Features: Add in the new smart clip, spring integrated lanyard hole and paracord pendant and you have hunting’s new generation go-to multi-tool
Finish: Aesthetically it’s a hit too; the subtle shimmering finish showcases the knife’s key parts with style

Editor: I recommend purchasing the Victorinox Pro Hunter Alox at BladeHQ or Amazon. Thank you for reading.