Survival Knives

Schrade Frontier SCHF52 Review

Sometimes, you just need a big, dumb knife. Thus was the rationale behind my purchase of the Schrade Frontier SCHF52, a tool designed “with extreme wilderness survival situations in mind.” While I don’t consider myself an extreme sort of guy, I do certainly enjoy both the wilderness and the thought of surviving.

Buy the Schrade SCHF52 at BladeHQ

Buy on Amazon

I tested this full-tang terror over a few blustery days in New Mexico, tackling fallen trees and dry timber on the banks of the San Juan River. It was, like many of the best things in life, a truly surprising experience. Let’s dive in.

General Dimensions and Blade Details

As always, we begin with some stats. This is one of the larger offerings in Schrade’s Frontier line, with a reach of 13-inches overall. Seven of these make up the coated blade, with 6.25-inches worth of sharpened surface. The handle adds another five, with the downward sweep of the pommel rounding out its foot-plus length. As expected on a survival-minded knife, the blade stock is wide across the shoulders – 0.23-inches, to be exact. The grip is fairly substantial, with 0.83-inches of girth where the rubber meets the palm. All told, your $30-$36 buys just over a pound of drop-point, hollow ground 1095 steel. That’s a heck of a lot of tool for not a lot of money.

Here’s something you’ll hear echoed a few times throughout this review: I did not expect the SCHF52 to slice worth a damn. I figured chopping, cleaving, and other brute force tasks would be the Frontier’s forte. But the first time I swiped its edge across a branch, I was shocked to see a long, thick strip of wood go flying through the air. The hollow grind bit deep beneath the bark, leaving a flattened swath of wood in its wake. I did this over and over until I’d completely stripped a foot-long stick. Then I picked up another and did it again.

Once this initial delight wore off, I set to testing the tasks for which the Frontier was ostensibly designed. As expected, its substantial weight and durable steel make it an excellent chopper. The heft of the blade and security of its rubber grip allows you to generate impressive force on the swing, and the edge bites hard into fallen timber. The hollow grind also proved to be surprisingly durable. After bashing through a log or two, I was still able to generate some pretty fine wood shavings.

Next up was every internet troll’s favorite use for an outdoor blade – Batoning. While I generally avoid this with smaller blades, the SCHF52 is built for these sorts of tasks. So, driving it through a three-foot length of dead timber should be no problem, right?

Right.

So, what can’t the 52 do? Well, it’s not going to be the greatest asset when it comes to food prep. The hollow grind will do better than others, but the overall thickness isn’t terribly helpful at the cutting board. And, as you can see, the blade coating will rub off when driven through slabs of wood. But overall, the performance of this sub-$40 knife blew me away. I expected it to be good, but not this good.

Handle and Ergonomics

The overall ergos on the SCHF52 are excellent. The texturing on its rubber cladding locks into the palm, inspiring confidence through a variety of uses. The pistol-grip style forward finger choil is excellent for delicate maneuvering, and the downward curve of the pommel fits well against the heel of my hand. You can even use this area for increased chopping leverage, wrapping your ring and middle fingers against its gentle hook. This allows for a bit more force on the swing, though the impact can be rough on gloveless hands.

Speaking of rough, the lone sore spot here is the jimping just aft of the upper blade guard. It works fine during light carving work, but it bites at the webbing of my thumb during heavy use. It’s not the end of the world, but I’d recommend wearing gloves for impact tasks.

In addition to my rubber model, Schrade offers the Frontier 52 in Micarta, as well. Personally, I think the slightly spongy texture of the rubber is better suited to impact tasks, while being more attractive to my particular eye.

Sheath

Sheaths tend to be the weakest point on most budget fixed blades. Happily, I found Schrade’s sheath to be markedly better than expected. The nylon strap and body hold the knife securely, with a surprisingly comfortable ride for such a hefty blade. The knife slides in and out effortlessly, once you find the narrow slot in the integrated plastic sleeve. This takes a bit of attention, so be careful until you’ve developed a feel for it.

The biggest weakness I see here comes from the belt loop. It’s secured by what amounts to two pieces of folded over Velcro, pressed together around the pass-through. I think anyone who’s ever had a long-term pack, pouch, or pair of shoes with this sort of closure can see where this is going. Eventually, those sticky surfaces attract dust, fabric, and all sorts of material to their tiny claws. This limits the lifespan of the material, especially on what I consider to be a hard-use tool. If you’re looking to the Frontier as long-term companion, you may want to fuse these strips together somehow.

Other than this one issue, however, the sheath appears to be up to snuff. Even the little leg-loop at the bottom works well despite, as my wife and her friend put it, looking “really silly.” They’re right – Walking around with a boot lace tied around your thigh does look kinda dumb. But in the wild (or your own back yard) who really cares?

Let’s quickly touch on the included ferro rod and sharpening stone. In truth, I expected both of these add-ons to be junk. And while I was half right (the included striker steel is garbage), I was able to make fire using the ferro rod and the back of the blade. The spark output isn’t massive, but it was enough to catch the dry tinder I pulled from the side of a fallen tree. The rod is pretty thin, though, so don’t expect it to last for more than a handful of trips.

As to the sharpening stone, I haven’t had occasion to test it. The 1095 held its edge quite well, and a quick visit to the strop set it back to hair-shaving sharp. While it may not generate the polished edge of a bench stone, I have no doubt it’ll be serviceable in the field.

Schrade SCHF52 Review – Final Thoughts

This is a knife I expected to like from the get-go. It wasn’t, however, one I expected to love. But from the first slice across its very first twig, I really fell for this blade. It’s a simple, straightforward, and eminently capable design, backed with materials that walk the line between durability and disposability like no tool I’ve ever tested.

What I mean is this – I’m confident that the 1095 can hammer through a log. But, should it fail, I also know that I’m only out $30. This sort of confidence is very liberating, allowing you to focus on the fun of your outdoor adventures without babying the blade. I even brought along my Steel Will R300 Roamer for comparison, a D2-bladed knife costing twice as much. And you know what? I think I actually prefer the Schrade.

Overall, the SCHF52 gets an unqualified recommendation from me. It plays the part of the big, dumb knife to perfection, while packing just enough smarts to keep things interesting. At this price point (or even twice that), you’d be hard pressed to do any better.

Schrade Delta Class Bedrock High Carbon Steel Fixed Blade Knife with 7in Drop Point Blade for Buschcraft

DIMENSIONS:Blade Length 6” - Handle Length 7” - Overall Length 13” - Weight 23.4 oz
MATERIALS: AUS-8 steel drop point style blade
SECURE: Overmold handle for confidence in your grip
BE PREPARED: Injection molded sheath for convenient carry
WARRANTY: This knife includes a limited lifetime warranty. If you have questions or concerns please contact Schrade Customer Service

Editor: I recommend purchasing the Schrade SCHF52 at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Mora Garberg Review

by Josh Wussow 7 Comments

Last Updated: July 15, 2019
You’re familiar with the concept of being “fashionably late,” right? It’s the idea that, by showing up to a party well after the festivities have begun, you’ll gain coolness-points by joining in just as the fun hits its stride. While no one has ever accused me of being either fashionable or cool, I am a bit late to the coming-out bash for the Mora Garberg.

Buy the Mora Garberg at BladeHQ

Buy on Amazon

But, when Morakniv offered to send me a sample for review, I knew I couldn’t pass up the invitation. This party of two took me from the dry winter of New Mexico to the snows of Colorado, with food, fire, and woodworking along the way. Now that the festivities have faded, here are my thoughts on the Mora Garberg.

General Dimensions and Blade Details

There are two major differences between the Garberg and its more budget-minded cousins like the Companion. First is the main thrust of its existence – That glorious, full tang construction. See that bit of metal peaking from the back of the pommel? Wonderful!

Then there’s the steel. While most of Mora’s lower lines employ carbon blades (yes, I know you can get the Companion in stainless), the Garberg utilizes Sandvik 14C28N. According to the maker’s website, this is a steel intended for situations placing “Very high demands on edge sharpness, edge stability and corrosion resistance such as chef’s knives, pocket knives, hunting and fishing knives.”

Mora has put 4.25-inches of Sandvik’s finest into the Garberg’s clip point blade, 4-inches of which are sharpened. The square-edged spine is fairly broad, with a lateral measurement of 0.12-inches. Add in 4.75 for the handle, and you’re left with an overall length of 9-inches. It’s a pleasing, medium-range design from the Swedes, weighing in at a hair under six ounces.

So, how does it perform in the field? In short, it’s a Mora. Carving, spine scraping, and wood shaving are an absolute breeze. And, thanks to its full tang toughness, I had no trouble batoning through small and medium sticks. This knife was a pleasure to use in the field.

One important note – While most Mora’s come with a scandi edge, they’ve opted to include a tiny micro-bevel on the Garberg. It’s an interesting departure from their usual MO, but not one that causes a whole lot of concern. Anyone looking to remove the bevel can do so with relative ease, given enough time at the sharpening stones. Plus, look at these ultra-fine shavings I was able to get. This, ladies and gents, is a precision instrument. Full scandi or not, the edge gets the okay from me.

Out of the dozen or so fixed blades to come across my review table, the Garberg is one of the two best fire starting implements I’ve tested. The other is the Cold Steel Finn Wolf, which I jokingly referred to as the “Finn Dragon” due to its ability to draw fire from a ferro rod by essentially breathing on it. The Garberg is the only other knife I’ve used capable of generating this sort of spark shower.

There are a few weaknesses here, however. As good as the Garberg is at striking a cooking fire, it’s not much help when it comes time to prepare your dinner. Slicing onions and other produce was a rather unpleasant experience, in fact. But, this is a known quantity with scandi grinds. Even with the microbevel, the Garberg’s edge geometry and thickness are ill suited to the kind of delicate slicing needed to produce evenly-shaved foodstuffs. It’ll do the job, but it’s happier squaring off against branches as opposed to brie.

Speaking of kitchen nightmares, I did encounter one issue with the microbevel. When rinsing the blade in the sink, I tapped its edge ever so slightly against the faucet. This produced a tiny, tiny roll that I’ll try to capture below.

Now, this is purely my fault. The knife still cuts with no noticeable difference, and I’m sure I can buff this right out. But if you’re using the Garberg in the wilderness, be sure your woodworking area is free of rocks.

Handle and Ergonomics

Per the folks at BladeHQ, the Garberg features a “polyamide handle with textured TPE inserts.” That’s a fancy way of saying “This is a $90 knife with a plastic handle.” And I’ll be honest – That choice of materials doesn’t exactly thrill me. I understand the reasoning (mass production, durability, lifespan, etc.), but I actually prefer the slightly softer and grippier handles on the Companions.

The ergonomics, however, are just fine. Its gentle ovoid swell fits my medium/large hand like a glove. And speaking of such, the polyamide handle actually works well with gloves. Cold weather testing for knives is a relatively new thing for me (despite growing up in the frozen tundra of Wisconsin), and the Garberg performed significantly better than the Condor I tested a while back.

Let’s briefly revisit the blade or, more specifically, the tip. It held up fine during a stab/pry test on wood, but the lack of a forward finger guard makes this a somewhat risky process. Grip is great for carving and other lateral cutting, but the impact of direct thrusts could slide your finger down onto the edge. This is especially true if you’re wearing gloves, because of the slight tactile buffer between the hand and handle. I’m not overly concerned about this, however. 99-percent of the time, the Garberg’s grip is solid.

Sheath

In standard trim, the Garberg arrives with two options – an unobtrusive leather belt loop and a MOLLE-compatible multi-mount setup. I didn’t test the more military minded option because, well, I’m not that hardcore. Truth be told, I don’t think I own a pack with MOLLE webbing, unless you count my Vanquest organizer pouch. But affixing the MORA to my backup kit would look a little strange.

The ride on the Garberg’s plastic sheath and belt loop is light and effortless. So much so that, when I got home from the woods, I left it on my belt for the rest of the day. While I’m not sure about the longevity of the leather loop (the material is a bit thin), it’s going to be great while it lasts.

The hard, plastic profile of the Garberg’s stock stowage fits the knife pretty well, and I enjoy the reverberating clack on the draw and return. It’s a sound I associate with Mora as a brand, so that’s part of the charm for me. Blade retention is only okay, however. Given a medium-strength shake, it will pop out of place. Part of the multi-mount system includes a leather fold-over clasp, but this slide-on accessory occupies the same space as the belt loop. So, you choose one or the other.

Mora does offer a full leather sheath for those willing to pay a slight premium. This option has a more substantial fold-over flap with snap closure and a belt loop. I didn’t get a chance to sample this option, but it certainly looks interesting. If you’re after a more traditional outdoor aesthetic, you may want to give it a go.

Morakniv Garberg Review – Final Thoughts

My three-word summary of the Garberg is as follows: Confidence in hand. From the moment I drew it from its sheath, I knew this was going to be a solid tool. While I’m not the biggest fan of the handle’s material, its shape and performance eventually won me over.

The biggest knock on the Garberg isn’t the microbevel, or the sheath, or its lack of foodprep prowess. It’s the price, plain and simple. Most folks are used to paying $15-$30 for a Mora, and this model costs at least three times that. Personally, I can see where the angst comes from. Steel Will and Buck make blades that are almost as good functionally, while costing substantially less.

But what it boils down to is this – Of all the fixed blades I’ve tested, the Garberg is the one I’d want to take with me into the wilderness. It’s an all-around performer from a storied company, perfect for buyers who are looking for a single, do-it-all bushcraft blade.

Do I think it costs too much? Absolutely. But in the field, far away from your bank and bills, this is an excellent knife.

No products found.

I recommend purchasing the Mora Garberg at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Condor Swamp Romper Review

by Josh Wussow 4 Comments

Quick – What’s the first name that springs to mind when someone mentions “budget blades?” For me, the response is usually “Morakniv.” But there’s another answer out there in this Pictionary of the mind – Condor.

Buy the Condor Swamp Romper at BladeHQ

Buy on Amazon

Though generally known for the Bushlore knives, this El Salvador-based manufacturer offers a wide line of outdoor blades, most of which clock in around $50. This puts them well above the plastic and partial-tanged Mora Companions, but in the same neighborhood as the Kansbol and Bushcraft Black. Add in their full tang construction and leather sheaths, and the Condors become quite the value proposition.

But that’s just the bird’s eye view. I recently got up close and personal with the Condor Swamp Romper, a scandi-ground model operating in the $50-$60 realm. Here’s how it held up in the kitchen and on the trail.

General Dimensions and Blade Details

When dealing with budget knives, my first question is always the same – “What’s the steel?” In the case of the Condor, we’re looking at 4.5-inches of 1075, which is a lower-carbon version of the 1095 found on ESEEs and other popular outdoor knives. It’s easier to sharpen (which is saying something, if you’ve ever breezed through a touch-up session with 1095) and less prone to chip. On the downside, it’s also more rust prone and doesn’t have the same edge retention.

Speaking of edges, the Swamp Romper’s scandi grind runs the length of its drop point, satin blade. Width across the squared-off shoulders is 0.12-inches, a nice medium-size for both splitting and slicing. The overall length and weight come to 9.5-inches and 5.34-ounces, respectively. It’s a fairly lightweight tool, considering its full tang and the scope of its cutting edge. There’s even a sharpening choil at the back end, a welcome addition for do-it-yourselfers like me.

Here is a shot of it next to the Benchmade Bugout for reference:

Let’s talk about performance. Though it may hail from the Swamp, I found this knife to be a Romper in the kitchen, as well. Tomatoes, onions, carrots – It handled foodstuffs with ease. The tallness of its scandi grind and the thinness of its blade made it a surprisingly excellent culinary tool – Better than most of the Moras I’ve used.

Field testing was a different affair. There aren’t a whole lot of wetlands where I live in New Mexico, but an hour’s drive north to Colorado yielded a snowy canyon trail and frozen river banks. After finding a dry spot, I gathered some small timber to make a fire. The Swamp Romper proved to be an admirable cutting companion, feather-sticking and batoning with no issues to speak of. The rough spine is capable of striking a fire steel, though perhaps not quite as well as I’d expected.

Now, the downside. I knew the 1075 would be rust-prone, but I wasn’t prepared for just how rust prone it was. It discolored almost immediately, showing marked stains by the time I returned home. Now, this isn’t something I necessarily mind in a field-use tool. Patina tells a story, and I like it so long as there’s no structural weakness behind the pretty picture. But I am a little concerned, given that I don’t think the blade actually touched any snow during testing. Whatever moisture that came into contact with the blade was probably from some slightly damp wood. A quick cleaning, stopping, and application of mineral oil brought it mostly back, but it did take some of the bloom off this particular rose.

Handle and Ergonomics

Here’s where things get muddy. The Swamp Romper’s ergonomics are solid overall. Its 5-inch long and 0.85-inch thick handle resembles the broomstick-style found on some of my favorite outdoor knives, and the knife fits my medium/large hands very well. The scales themselves are made of contoured walnut. And what are walnuts famous for?

That’s right – They crack. Somewhere along the line (I think when I was gently chopping at a dead branch), a piece of the handle sheered completely off. You can see the glue marks where it broke free, leaving me without a finger guard on one side of the knife.

For me, this was the turning point of the review. Up until this failure, I’d been generally pleased with the rugged, tool-first aesthetic the Condor was projecting. But when I say I was gently chopping, I mean it. Is the knife still usable? Sure, but who wants to carry a broken tool? It was a disappointment, akin to flushing a $50 bill down the toilet.

Sheath

You know what makes things worse? I really like the sheath. One of the main things that brought the Swamp Romper to my attention was the firesteel loop on its leather carrier – Something you don’t get on the more popular Bushlore. It’s not the best-finished leather I’ve ever owned (Steel Will’s Druid series beats it pretty handily), but it had that same rugged quality that I found in the knife itself.

Retention was good, if a little tight at first. There was also a strange swipe of what looked like fresh paint on one side. Again, nothing I was concerned about at this price point. But once the handle broke, the knife began to move a bit more freely when stowed. What would you expect, right? Half of the widest point is now missing. The worst part about this, however, is that this altered ride geometry brings the blade into contact with the interior leather. Each time I draw it, the edge is now covered in tiny brown fragments. Not good.

Condor Swamp Romper Review – Final Thoughts

In the beginning, I was fairly pleased with this knife. It performed well in the kitchen and around the campfire, leaving me with positive vibes. But then it broke. Next, it rusted. And then, thanks to its newly misshapen nature, it started to eat its own sheath.

So, is it worth $50? Man, I just don’t see it. It’s a roughly finished knife comprised of materials I’d call slightly below average. The nicest thing about the whole package is the firesteel loop. And even the sheath came with a strange stain. So, where exactly is the money going here?

In the end, the Condor Swamp Romper is a knife that inspires little to no confidence. The steel rusts quickly, the handle is fragile, and its rough-around-the-edges charm turned out to be, well, just rough. It’s good in the kitchen, sure, and it’ll strike fire. But none of this justifies the price point. This is one swamp I’d steer clear of.

Condor Tool & Knife Swamp Romper - Camping Fixed Blade Knife - 1075 High Carbon Steel - Walnut Handle - Hand Crafted Welted Leather Sheath - Bush Crafting Knives - 4.5in Blade | 5.6oz

FULL TANG CONSTRUCTION: The blade of this full tang knife with sheath extends through the handle, enhancing its strength, balance, and reliability for frequent use. Its full tang construction ensures durability, strength and minimizes breakage risk.
ELEGANT WALNUT HANDLE: The grained walnut handle is a blend of aesthetics and ergonomics providing a comfortable and secure grip, enhancing the pocket knife’s ease of use. This bushcraft knife's overall design makes it highly functional and a joy to wield.
HANDCRAFTED WELTED LEATHER SHEATH: Handcrafted with attention to detail and a traditional aesthetic in mind, this field knife facilitates safe and convenient carrying during activities, effectively protecting the sharp blade from accidental exposure.
POCKET SIZED: This bush knife is prized for its portability, ready to use for emergencies, and outdoor bushcraft activities. They are also cost-effective and can potentially be used for self-defense such as a military combat knife when necessary.
VERSATILITY: The flat grind with second bevel is a deliberate design choice of this bush knife that makes it excel at tasks such as hunting for skinning, hiking, camping for cutting rope and food preparation and is also essential for bushcraft activities.

Editor: I recommend buying the Condor Swamp Romper, or perhaps something else, at Condor Swamp Romper or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Emerson PUK Review

by Travis Pike 1 Comment

Last Updated: August 5, 2019
Emerson is well known for producing a wide variety of knives, but they are most famous for producing a tactical folding knife known as the CQC 7. The CQC 7 is popular among spec ops troops around the world. The CQC 7 is what caused Ernest Emerson to turn the company from a garage operation to one of the most well-known knife companies in the world.

Buy the Emerson PUK at BladeHQ

Buy on Amazon

By trade I’m a gun guy, and as a gun guy I find it easy to identify guns in movies. I’ve slowly become more and more of a knife guy and now I’ve started to notice knives in movies. Does this influence my interests? Sometimes… So, was Bruce Willis and Tears of the Sun on my mind when I snatched up an Emerson PUK? Sadly no, but once Tears of the Sun hit Netflix I got a little confirmation bias.

The Emerson PUK, or Police Utility Knife, is one of the few fixed blades Emerson produces. The PUK is not a big knife. It’s short and thin, but easy to carry. If Rambo has set the baseline for your commando knife, you’ll be disappointed at the subtle and small nature of the PUK. The PUK was made for police use, but according to Emerson has found its way into the hands of elite units like the British SAS.

I’m sure it’s a great knife for Bruce Willis’ Navy SEAL, but I wanted to find out what the PUK offered the everyday Joe.

General Dimensions and Blade Details

The Emerson PUK has an overall length of 8.5 inches with a 3.6-inch blade and weighs only 5.5 ounces. The PUK is one of the many Emerson knives made in the USA.

The Emerson PUK blade is only .125 inches thick. This thin blade helps keep the knife both balanced and lightweight. The blade is designed for heavy duty cutting and is made from a single piece of 154CM steel. 154CM is better suited for heavier cutting than standard stainless steel and has excellent edge retention. The biggest downside to this steel is its corrosion resistance. It’s far from perfect, but Emerson took steps and coated the blade to protect it against corrosion.

With the words Police and Utility in the name it’s safe to say this knife was designed to be more tool than weapon. However, I wouldn’t want to find myself on the wrong end of the PUK. The intent of the blade is for tactical use and the situations most police will find themselves in.

The cutting work of police is likely going to be heavy duty. Officers may be tasked with cutting through seat belts, through clothing, into the seats of cars and trucks, and much more. This kind of cutting requires a strong and capable knife. This is one of the advantages of using a fixed blade over a folding knife. With this in mind the blade’s V grind makes a lot of sense. V grinds tend to be better suited for heavy duty cutting. The PUK certainly has no qualms about slicing through materials both thick and thin.

I’ve taken the PUK to task by cutting through cardboard, an old pair of jeans, a ratchet strap, and some half inch thick rope. It glided through the cardboard and jeans, and only took a little effort to rip through the rope and ratchet strap. I’d like to try it against a seat belt but the Highway Patrol likely wouldn’t accept that as an excuse for why I’m not buckled up.

The blade’s short length makes it nice and handy. A 3.6-inch blade is something more common on folding knives, but it makes the PUK compact enough for easy carry. For plain clothes officers or civilians this thin and relatively short knife is easy to conceal.

Handle and Ergonomics

The handle is made of two pieces of G10 glass laminate material. G10 is a tough and easy to texture material. Oh boy, are the PUK’s grips textured. The grips are heavily scalloped and between the scalloping is a rough stippling. Near the inside of the grips is a step style texturing all the way to the center of the handle. The combination of these three-different grip texturizations gives you a one helluva grip on the knife. This grip isn’t shy about being rough.

In the hand this is nice because the knife isn’t going anywhere. You can chop, slash, and stab and the knife is staying put. The downside is that heavy work sans gloves really starts to rub into the hand. I developed a few hot spots during testing. This is one knife where tactical gloves are a must have for long term use.

Another downside occurs when carrying the knife concealed. It really rubs against the body to the point where it’s just plain painful. I would suggest an undershirt between the knife and body.

The handles form and shape is nice and comforting. It gives you a sure grip and the handle naturally forms a bit of a cliff to protect the index finger. On the opposite side a slight ridge rises and provides you a good point to rest the thumb for extra leverage.

Sheath

The old PUK’s came with nylon sheaths and this is what you see in Tears of the Sun. The new PUKs come with I’ve found to be one of the most robust and versatile sheaths options out there. It’s a kydex sheath that comes complete with a Tek Lok belt attachment.

The Tek Lok, from Blade Tech, is an incredibly versatile sheath mounting system. With the appropriate sheath you can easily change the orientation of the knife. You can do anything from add a little forward cant to mounting and carrying the knife horizontally.

The Sheath uses a passive retention system that ensures the knife stays put. It doesn’t take much to remove the knife, but it feels secure. I’m comfortable running the knife horizontally, and even upside down on tactical gear. The sheath is even compatible with MOLLE Lok components if you want to attach it to a vest or battle belt.

Emerson PUK Review – Final Thoughts

The Emerson PUK is a nice working mans fixed blade knife. It does nothing but excel at its role as a compact fixed blade utility knife. This short, but strong knife is an excellent companion for police and soldiers who want something more compact than your average fighting knife. I could see it being an excellent knife for first responders as well. The PUK could be a camping knife, but a heavier, more robust knife like the ESEE 4 would likely be a better outdoors option.

It’s not exactly a cheap knife, retailing at over 200 dollars. I will say I think the knife is worth the money, but it may not be a knife needed by your everyday Joe. If you are looking for a compact, lightweight and dare I say easy to carry fixed blade utility knife the PUK fills that role. It’s a high quality blade that lives up to its namesake.

Emerson Police Utility Fixed Blade Knife, Stonewashed Finish, 3.60 in Blade, PUK-SF

If you are thinking of buying an Emerson PUK, please consider purchasing it at Amazon or BladeHQ. By purchasing things through any of the links on this website you support BladeReviews.com, keep the website free of annoying banner ads, and help produce future reviews. Thank you very much.

Arthos Knives Drop Point Fixed Blade Knife Review

by Dan Jackson 2 Comments

It’s not every day I get to share a new manufacturer. I was recently approached by Robert Yates with Arthos Knives about checking out his new line of fixed blade outdoors knives. Robert is an engineer by day, who decided to take the leap and start his own knife company. I think basically anyone who enjoys knives long enough eventually dream of designing their own knives, or starting a knife company. I thought it would be interesting to see what he developed, and I told him I’d be happy to check out his new knife.

Arthos stands for “The ART of Hunting, Outdoors, and Survival”. This drop point fixed blade is the only knife in their catalog currently, and it does not have a name. I will refer to it as the “Arthos” throughout the review.

General Dimensions and Blade Details

The Arthos has an overall length of 8.6″, a 4.0″ blade. The handle and sheath are made in the USA while the blade is made in China. The knife is finished an assembled in the USA.

The Arthos is geared towards the outdoors crowd. It is a little bigger than my ESEE-3. This could be a good camp knife. It’s big enough to do some light chopping and batoning, but small enough to carry around on your belt without issue. I’m not a hunter, but could see it being used in that capacity.

The Arthos has a simple drop point blade. This classic blade shape is capable and versatile. The edge is almost a continuous belly ending in a strong tip. Arthos went with a saber hollow grind. It makes for a strong knife.

I tested this knife on some seasoned oak firewood, bamboo, 2x2s, and green wood. The Arthos came sharp, and is a good carver. The uncoated blade peeled off thin slices of wood with ease, and did a good job limbing small branches. I am a little spoiled by heavy duty convex ground blades like my Fallkniven A1, and Bark River Bravo 1 (to be reviewed), but for a mid size knife I felt like the Arthos held its own. The tip is strong and held up under some light prying.

I also did a little batoning with the Arthos. The relatively thin and short blade don’t make this a great choice for batoning, and neither does the saber hollow grind, but the blade held up to the beating and I was able to pop apart smaller diameter pieces of wood.

Arthos decided on D2 steel for their fixed blade. D2 is a good choice for a camp knife. It’s tough and it holds a good edge. D2 has a reputation for being stubborn to sharpen, but I haven’t noticed any issues with this simple blade shape. In fact, the Arthos sharpens up nicely on my Lansky Crock Sticks. D2 is a semi-stainless steel, so it will stain and it may rust if you aren’t careful with it. Arthos does offer this knife with a black coating, which may not be a bad idea for humid environments.

Handle and Ergonomics

Robert mentioned to me that it always bugged him how the handles on knives felt like an afterthought. Here he wanted to give the handle special attention. I gotta say he did a great job with it. The Arthos features a fully contoured CNC machined G10 handle. These were done by Stoner CNC, and they did an excellent job.

I will note that there is no locktite on the torx hardware. If you plan on using this knife spiritedly you will want to add some thread locker prior to taking it out.

Arthos offers their knife with a variety of color options. The scales are held in place with T-10 torx bits.

As you can imagine, the handle feels great. There is plenty of palm swell to support your hand, and your fingers fall naturally into the countours of the handle. There is a short run of jimping on the spine of the blade. Personally, I feel that the jimping is too sharp to be useful without gloves. On the bare thumb the jimping is painful for any kind of serious cutting. Beyond that I found the handle to be comfortable. I think the choice of machined G-10 handles kicks things up a notch on the Arthos.

Sheath

The sheath is another part of the knife where Arthos went above and beyond. The Arthos features a hand fitted custom kydex sheath. This pancake style sheath has been nicely finished; no sharp edges and a generous drain hole. The blade pops out with the deliberate push of a thumb, and slides back in with a satisfying “thwack”. There is no rattle or wiggle.

Arthos also included a Tek-lok pre-attached to the sheath. This is an expensive add on to include, and makes the sheath easy to attach to a belt. At this price point you will be hard pressed to find a knife with a nicer sheath.

Arthos Knives Drop Point Fixed Blade – Final Thoughts

For a first offering, I think Arthos did a great job with their D2 hunter. The handles and sheath are top notch, and serve to elevate the basic blade. I can’t think of anything else that has handles and a sheath as nice as the Arthos at anywhere near this price point. The blade is serviceable, but pales in comparison to the sheath and handles. The grind is basic and I am not a fan of the jimping, but the blade performs well and the D2 steel is a good choice for and outdoor fixed blade.

If I were to offer Arthos Knives some constructive criticism, I’d recommend upgrading the blade. I might suggest thicker stock with a full flat or higher grind, and perhaps bringing the manufacturing of the blade over to the USA. It may significantly increase the price, but at that point you would have a truly premium product, and I think the handles and sheath justify it.

As it stands I think this an impressive first offering from a new company. For those that are interested in this knife, I think that the Arthos provides a lot of value for money, and the exceptional handles and sheath distinguish it from a competitive market. I’d recommend it.

[easyazon_block add_to_cart=”default” align=”center” asin=”B01MRRZ77B” cloaking=”default” layout=”top” localization=”default” locale=”US” nofollow=”default” new_window=”default” tag=”brdfkdfk-20″]

I recommend purchasing Arthos Knives directly from the manufacturer or at Amazon. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Mora Companion Review

by Benjamin Schwartz 3 Comments

I’ll always be a folding knife guy at heart, but recently I’ve been on a fixed blade kick. I never thought they would appeal to me, but I’ve come to appreciate fixed blades of all shapes and sizes. And in a nice little fluke of symmetry, just as my appreciation of folding knives began with an affordable, European everyman’s knife, the fixed blade that opened my eyes is similarly affordable, European, and populist: the Mora Companion.

Buy on Amazon

The Mora Companion, and Mora in general, has a complicated reputation in the knife world. This complication stems from its intersection with the hardcore outdoorsman / survivalist / bushcrafter communities. Whether or not it was designed for the kind of applications these guys put it through is unclear (and Mora’s own literature on the subject is vague), but it has become a point of contention amongst enthusiasts, who tend to think it is an indispensable tool or a sham of a knife.

I approached this review with no significant outdoors experience, no previous Mora experiences, and no fixed blade preferences. The Companion thoroughly impressed me. I put this through an especially wide array of cutting chores and it never flagged, never failed to impress me. This is a beautifully simple tool. It was an impulse purchase for me, and the best one I have ever made.

(For the record, the model I reviewed is a standard Companion with the 12C27 stainless steel blade.)

General Dimensions and Blade Details

The Companion has a 4” blade, a 4.5” handle, and an overall length of about 8.5”. It comes with a plastic friction fit sheath. Combined, the knife and sheath weigh just about 4 oz. Like all Mora knives, the Companion is made in Mora, Sweden. The Companion is exactly the right size for the sort of general outdoor tasks you would call on it to do.

Mora has a near-perfect rendition of the drop point here. One thing that is hard to notice in photographs is the balance between straight and curved edge. It may not look like it, but the blade is divided, length-wise into equal portions of curved and straight edge. Some blades favor one or the other but here, the balance is exact. Whether you’re slicing, roll cutting, push – or pull-cutting, you’re going to have enough length of the edge you need for the job. Brilliant.

Steel is 12C27 – a great blade steel, especially at the price. There are plenty of proponents of the carbon steel Moras out there. I’m sure that the carbon steel is great, but I abhor rust and I abhor having to worry about my knives so I went with the stainless. It’s kept a little soft at 57-58 Rockwell, which is probably good given that it might be pressed into more demanding tasks.

The Scandi grind is a traditional element of Scandinavian knife culture, present and accounted for on the Companion. It’s a little reductive, but the way I think of a Scandi grind is as a sabre grind with an extremely small edge bevel. Scandi grinds are renowned for their woodworking ability, and my experience with the Companion reinforces this. This knife took huge, even bites out of a block of basswood. Beyond this, the general geometry of the edge made the knife excel at just about everything. I cut woods, thick plastic ties, paper, cardboard, and produce. The Companion went through everything with ease, and I never fought to push it through media until it was almost totally dull.

The first time I sharpened my Companion I just went along the tiny edge bevel and had great results, although I understand now this isn’t the traditional method. If you watch videos on how to sharpen a Scandi-ground knife, they tell you that the primary bevel sets your sharpening angle. This means that you should never have to reprofile a Scandi-ground knife, even after years of use. It also means that if you’re using something like a Sharpmaker you may have to configure it for freehand sharpening.

The second time I sharpened the Companion, I set it along the primary bevel as I was supposed to. It worked well, although I marred up the mirror finish on the knife a bit. I was using a dry diamond plate instead of a wet stone, so this may have had something to do with it.

Handle and Ergonomics

The Companion’s handle is made from plastic, with a TPE-like wrap around the center swell. It’s great, plain and simple. The palm swell is exactly my style, and there is just the slightest amount of Coke bottling to fill the hand. The downturn at the butt of the knife and the guard at the front are both gentle enough to preclude any issues of finger crowding. This is a great, task neutral handle.

Some designers overengineer their handles, with embellishments like finger grooves, parrot beaks, palm swells, different traction inserts for different parts of the handle, jimping, thumb ramps – eventually it just becomes too much. The Companion is wonderful in the hand without being overdesigned. I wouldn’t call it understated so much as simply stated: this is just a knife, plain and simple. The handle is here so you can use the thing, so go out and use it, however you want.

Sheath

The sheath is your standard plastic friction fit Mora affair. Although it didn’t move me to my core, I like this sheath. The plastic, while not as handsome as leather, doesn’t look any worse to my eye than nylon and is very lightweight and durable. There’s a drainage hole at the bottom to let out accumulated moisture, and I like that the belt clip doesn’t require me to take my belt off and loop it through. You simply pry it open far enough to slide over your belt, and you’re golden. It almost works like an oversized pocket clip.

Another small feature that I found surprisingly handy was the thumb ramp on the corner of the sheath. You can push off it with your thumb to disengage the Companion from the sheath with ease, and it helps index when you’re putting the knife away.

Mora Companion – Final Thoughts

I’ve gone this long in the review without addressing the Companion’s price, so I’d like to do so now.

A lot of people say or think that the Companion is a good knife for the price. I don’t believe in good knives for the price. There are good knives, and there are good values. You can pay too much for a good knife, but you can never say a bad knife is a good value.

I think that reviewers need to address the cost of all the products they review, because value – what you get for what you pay – is an intrinsic part of good design. It contextualizes design decisions. This is why we’re okay with AUS-8 on a $25 knife but less thrilled when we get it for $80 – it doesn’t make a knife a worse knife, but it makes it less well-designed, and thus less attractive as a possible purchase.

If I paid $75 for the Companion, I’d still tell you that it was a good knife, but I would take issue with design choices relative to its price, and it wouldn’t get a recommendation.

Sale

Morakniv Companion Fixed Blade Outdoor Knife with Stainless Steel Blade, 4.1-Inch, Military Green

BUSHCRAFT KNIFE: The perfect all-in-one knife for outdoor enthusiasts, this outdoor knife makes an ideal camping knife, backpacking knife, fishing knife, hiking knife, or survival knife
PREMIUM BLADE: 0.08-inch thick hardened Sandvik 12C27 stainless steel knife blade stays sharp longer than carbon steel and is less prone to rust; Ideal for carving, food prep, and cutting tinder
HIGH-FRICTION HANDLE: Made with an ergonomic polymer handle with a soft friction grip and finger guard, this knife is safe and efficient for use in all weather conditions
PROTECTIVE POLYMER SHEATH: Easy-to-clean plastic sheath comes equipped with a belt clip, so you can easily attach your knife to a belt or rucksack
SPECIFICATIONS: Blade thickness: 0.08 inch (2.0 mm), blade length: 4.1 inches (104 mm), total length: 8.5 inch (217 mm), net weight with sheath: 3.9 ounces (110 g)

I recommend purchasing the Mora Companion at Amazon. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.