Hard Use Folding Knives

Emerson CQC-13 Review

Last Updated: August 10, 2019
Emerson is one of the most American knife companies I can think of. Their blades are 100% made in the USA with American made materials, and when you thumb through one of their catalogs (or the pages of their website) you really get the feeling that these knives are distinctly American. There are plenty of references to the US Military, MMA, and hard rock – to the point where you can practically feel the bald eagles whooshing over your head.

Buy the CQC-13 at BladeHQ

Buy on Amazon

So when you take a company like Emerson Knives and combine it with the iconic American bowie you get what is arguably the most patriotic production knife on the planet: the Emerson CQC-13 Combat Bowie.

General Dimensions and Blade Details

The CQC-13 has an overall length of 9″, a 3.85″ blade, and it weighs 5 ounces. Like most of Emerson’s offerings this is a pretty big knife. Designed for military, police, and anyone else seeking a large and rugged tool, this is a no-nonsense tactical folder. Personally I tend to pair it with a smaller utility knife.

The blade is what really drew me to the CQC-13, which makes sense because Emerson’s knives all follow a similar formula. Besides different blade and handle shapes, they are all built pretty much the same. Here we have a mean clip point cut from thick stock with a needle sharp tip, a good amount of belly, and a partial flat grind. My preference is for the stonewashed version, but Emerson also makes them in a black coated and matte finished (shown here) versions as well. Like many Emersons this knife is V ground, but the edge features a chisel grind (ground on one side instead of both like most normal knives). According to Emerson this is done for ease of sharpening in the field.

Like every other Emerson knife on the market the CQC-13’s blade comes in 154CM stainless steel. The steel is heat treated to 57-59 HRC, which makes the knife easy to sharpen yet capable of holding a nice edge. 154 won’t retain an edge as long as some of the more exotic steels on the market, but it is a proven steel and remains an all-around good choice.

Handle, Ergonomics, and Pocket Clip

In the handle department the CQC-13 continues to follow the typical Emerson format: roughly textured black G10 scales, a partial G10 backspacer, a steel liner, and a titanium locking liner. There is a lanyard hole and all the screws are phillips head (except for the flat head pivot screw). Emerson isn’t known for making the prettiest knives, but I am actually quite impressed with how well this knife has been finished. The blade is beautifully ground, everything lines up, and the liners are attractively finished.

The CQC-13 really starts to shine once you start handling it. The spacious handle is extremely comfortable. There is plenty of room for forward or reverse grips and the handle features a deeply scalloped finger choil, and a nice run of jimping on the spine. This is a capable work knife and it is a pleasure to use. Ernest has a strong martial arts background and it shows time and time again in his handle designs. Simply put the ergonomics rock.

The pocket clip is once again classic Emerson. It’s a simple matte black parkerized clip, discrete and functional. My only gripe (per usual) is that the handle is only drilled and tapped for right side carry. I know they apparently make lefty versions of the knife and that you can send knife in to be drilled and tapped for left side carry (for $20) but honestly this is one of those cases where they should have just done that at the factory. Not just for lefties but also for right handed people wanting to carry on their weak side. When you consider the intended use and near $200 price tag, the 3 extra holes should come standard.

As for actual carry, the CQC-13 carries well for a larger knife. The pocket clip is discrete but not ultra-deep, so the knife is easy to get at but stays out of the way. At 5 ounces this larger knife feels lightweight for its size.

Deployment and Lockup

Naturally, one of the big selling points for an Emerson is the classic wave opening feature, which allows you to open the knife as you remove it from your pocket. If you don’t feel like waving open the CQC-13, you can always make use of the ambidextrous thumb disk, something I’ve always found slightly more cumbersome than a thumb stud or opening hole, but with a little practice it can certainly get the job done. Opening the knife is fairly smooth, Emerson uses nylatron washers in all his knives. They get the job done, especially if you opt to wave the knife open.

For lockup we have a titanium liner lock. I am generally not a huge fan of titanium for a locking liner, as it is not nearly as hard as steel of a blade tang, but Emerson has been making them this way for decades. In practice my knife still locks up fairly early, and there is little to no blade play. As an added bonus the titanium helps lighten the knife up – always a plus. It is also worth mentioning that the pivot screw is of the flathead variety, so it is easy to adjust with pretty much anything handy.

Emerson CQC-13 Review – Final Thoughts

Ernest’s Combat Bowie is exactly as advertised; a rugged folding tactical knife making great use of an iconic American blade shape. I have no doubt that fans of Emerson’s other offerings will also find much to love about the CQC-13. But lets be real for a moment, clearly, this is not a knife for everyone. Those preferring something a little more subtle will likely pass this one up. And like the rest of Emerson’s offerings, the Combat Bowie has it’s share of quirks unique to the brand (including the chisel ground edge, non-ambidextrous pocket clip, titanium liner lock, nylatron washers, etc). Finally, it’s not a cheap knife – not at all. All of these things tend to polarize people, and I can appreciate the opinions on both sides. However, if this is a knife that interests you I can attest that it is comfortable and well made. In conclusion the CQC-13 is another well thought out tactical folder that compliments the Emerson line nicely.

Emerson CQC-13
from: BladeHQ

Emerson ECBF CQC13 BT with Plain Black Blade

I recommend buying the Emerson CQC-13 at BladeHQ or Amazon. Thanks for reading.

Zero Tolerance 0560 Review

by Dan Jackson 30 Comments

Last Updated: July 27, 2019
Finally! A Zero Tolerance 0560 review. It feels like forever ago since the 560 was first announced at the 2011 BLADE Show.

Buy the ZT 0560 at BladeHQ

Buy on Amazon

Since then I have heard the rumors, ogled the pre-production photos, and even caught a glimpse or two of the knife in some 2012 SHOT Show coverage. But that wasn’t going to do it. I needed this knife. What is it about Hinderer’s designs that have us fiending like depraved characters on a rerun of The Wire? Needless to say, I pre-ordered this bad boy a long time ago, and didn’t think twice about plunking down over $250 for the chance to check out this knife. After all, compared to a real Hinderer it seemed like a steal.

And for me, that really was part of the allure. If you spend any amount of time in knife circles, Rick Hinderer is a name that constantly resurfaces. Known for making highly sought after custom and semi-production folding tactical knives, his pieces easily command prices of $600 and up. So his recent relatively inexpensive collaboration with Zero Tolerance really caught my eye. Much like the ZT 0550, the 0560 allows you to get your hands on a Hinderer design without paying the Hinderer price tag. And I will tell you, as someone who owns both the 0550 and 0560, the praise for Rick’s designs is well deserved. This is a phenomenal knife, and it’s not going to make resisting a XM-18 any easier!

General Dimensions and Blade Details

The 0560 has an overall length of 8.8″, a 3.75″ blade, and a weight of 5.8 ounces. So yes, this is a big knife. For me it isn’t the most practical size for EDC, although that certainly didn’t prevent me from cramming the 560 into my pocket the moment it arrived. I have to say that one thing you will not hear me complain about is the weight. The 0560 is an incredibly light and balanced knife for its size. For example, the 0560 is substantially larger than the 0550, but weighs the exact same. It’s wonderful. And next to something like a ZT 0300 there is no comparison at all. For such a large knife I had no problem carrying it as my primary blade.

The blade is a sturdy modified drop point design. It shares a number of similarities to the blade on the 0550, having a similar swedge, and being made from 4mm thick blade stock. Both designs have high flat grinds, neatly applied edges, and feature a stone washed finish. This is a highly functional blade shape. The tip is extremely sturdy, there is a lot of belly for utility work, and the knife arrived exceptionally sharp. Considering the thick blade stock this is actually a very decent slicer, and zipped through cardboard without issue. In my experience this well rounded blade shape works great for most of daily tasks.

Kershaw and Rick went with ELMAX for the blade steel. This is a high end powdered steel made by the Austrian manufacturer Bohler-Uddeholm. I don’t have a ton of experience with ELMAX yet, but my initial research revealed that this is very interesting steel. According to Bohler, this is a high Chromium formulation that is extremely wear and corrosion resistant, while also being quite tough. It does best heat treated to between 58-60 HRC, and is often used as a high speed tool steel in both the electronics and food processing industries, where wear and corrosion resistance are both extremely important. These same properties are also important for cutlery, making ELMAX a natural choice for high end knives.

This is exotic stuff, and my initial impressions are very good. ZT heat treated the blades to around 60 HRC, which is right in the sweet spot. As far as edge retention is concerned, I expect this to perform better than S30V, but not quite as well as as M390 or S90V.

Handle, Ergonomics and Pocket Clip

Handle construction on the 0560 is truly next level stuff. I have always been impressed by the extreme levels of fit and finish found in ZT knives, but the 0560 has really been kicked up a notch. What we have here is a black G10 scale over a stainless steel liner on one side, and a titanium framelock on the other. Zero Tolerance also makes the 0561, which is the same knife with a brown G10 scale. What I found especially impressive about the 0560 is how they have 3d machined these handles. The surface of the handles are slightly radiused and everything has been precision cut. The stainless steel liner has been thoroughly milled to reduce weight, and even the titanium side has been milled out. These “weight relief pockets” really lighten the knife up. It’s an ingenious detail that I haven’t seen before, and it really sets the 560 apart.

In hand the 0560 feels extremely secure. There is aggressive jimping on the thumb ramp and choil, and it really locks your hand in place. The ergonomics are aggressive, and some might find the jimping too sharp. Personally I found that they were not aggressive to the point where the knife was uncomfortable to use. This knife was designed to get work done in all conditions so I can’t fault the knife for providing all this traction. I wouldn’t have it any other way.

The pocket clip is a brand new design for the 0560. This was especially interesting to me because with a big knife like this, the pocket clip will be the difference between making the knife a daily carry item, or a sock-drawer novelty. The clip ZT previously used was actually pretty good, so I approached this new design cautiously.

So I am very pleased to say that I like the new clip a lot. It’s functional, discrete and a little more refined than the old style of clip found on many Zero Tolerance offerings. It is an attractive deep carry clip that can be mounted on all 4 corners. I am also happy to say that retention is excellent. Additionally, I found the 0560 to carry very well. Living in Florida, I often wear lightweight shorts. The clip on the 0560 performed flawlessly, holding the knife exactly where I wanted it. This great clip combined with the thin and lightweight design made the 0560 a joy to carry.

Deployment and Lockup

Deployment on the 0560 is absolutely effortless thanks to a nice flipper design and Kershaw Velocity Technology (KVT). KVT is a bearing system that replaces a more traditional phosphor bronze or teflon washer with a series of small ball bearings. In this case, the bearings are pressed into a nylon race so when you take the knife apart, the bearings don’t go everywhere (contrast that with IKBS, where the bearings sit loose in a groove, and they can go everywhere if you disassemble they knife). In practice, KVT makes for exceptionally smooth deployment. The design gives you the option of a flipper or ambidextrous thumb studs, and either method results in smooth, near-effortless deployment.

I will say that I have noticed that some people have had issues deploying the 0560 with the right hand thumb stud. What can happen is if you try to deploy the knife with your right hand, you can you end up putting pressure on the lock bar. This makes it more difficult to overcome the ball detent with this particular design. The thumb studs actually double as a stop pin, so some argue that this knife was designed to only used as a flipper (like say, the Kershaw Skyline). As a lefty I had no problem with using the thumb studs, and found that I could even use them with my right hand if I was careful not to put a lot of pressure on the lock bar. I don’t think this is a huge deal at all, but since there are (very) few gripes with this knife I thought it was worth mentioning.

Like Hinderer’s in-house knives, the 0560 makes use of a beefy titanium framelock. The knife world knows Rick can design a frame lock, and Zero Tolerance has proven time and time again that they know how to make production framelocks right. My knife locks up early, there is no blade play at all. Also there is also no stickiness when you go to disengage the lock bar. This is pure framelock bliss, and is exactly what I expect from a high end titanium framelock knife.

Zero Tolerance 0560 Review – Final Thoughts

As far as I am concerned, the ZT 0560 is a marvel of a folding knife, and a technological masterpiece. The folks at ZT absolutely loaded this one to the gills with the latest and greatest features and manufacturing – and the resulting knife is absolutely wild.

The 0560 is impossibly light, the blade opens effortlessly, the machining and overall level of fit and finish is astounding, and the materials are absolutely top notch. I also think the design is quite attractive – that never hurts. The lightening pockets in the titanium handle slab is nothing short of revolutionary, and I don’t doubt that this will be a game changer for other manufacturers. This is easily another home run for Zero Tolerance and is without a doubt their most exciting offering to date.

Zero Tolerance ZT0560 Hinderer Design Black Folding Knife

Steel: ELMAX, stonewashed finish
Handle: 3-D machined G-10 front scale, 3-D machined titanium back handle, stonewashed finish
Blade Length: 3.75 inches; Closed Length: 5 inches; Overall Length: 8.8 inches; Weight: 5.8 ounces
Frame lock; Thumb stud; Lanyard hole; Flipper; Deep-carry pocketclip; Quad mounting
Made in the USA

I recommend purchasing the Zero Tolerance 0560 at Amazon or BladeHQ. Purchasing anything through any of the links on this site helps support BladeReviews, and keeps this review train running. As always, any and all support is greatly appreciated!

Benchmade 275 Adamas Review

by Dan Jackson 11 Comments

Last Updated: February 21, 2019

Designed as a tool for law enforcement and military personnel, the 275 Adamas could be the epitome of a hard use folder. The 275 shares the classic lines of many “normal” folding tactical knives, but is massively overbuilt in every direction. Designed by custom maker Shane Sibert, a man who strives to build practical knives that aren’t afraid of hard work, the Benchade 275 Adamas is as rugged as it is functional. The Adamas dwarfs typical tactical folders, and has these striking proportions that intrigued me ever since the knife was first announced in 2011.

Buy the Benchmade Adamas at BladeHQ

Buy on Amazon

Having owned my 275 for a while, I will say that whether the 275 is “tactical” or “impractical” will rely heavily on your individual needs and preferences – but there is no question that this knife is solid, and well built.

General Dimensions and Blade Details

The 275 has an overall length of 8.7 inches, sports a 3.82 inch blade and comes in at a hefty 7.7 oz. Yeah I wasn’t kidding, this is a big knife. Holding this chunk of G10 and steel in the palm of your hand is an interesting sensation, weighing on both body and mind. There is no doubt that fans of feather-weight folders will be disappointed here, but those in need of a tool capable of taking a real beating might feel reassured by these extra ounces. For daily use I find the 275 to be too heavy, and for a mild-mannered student that should come as no surprise. So it really depends on what you need from your knife.

The 275 has a bold drop point blade that compliments the rest of the knife nicely. The blade has a partial flat grind that starts about halfway up the blade, and the edge has been neatly applied by a practiced hand. On top we have a small swedge that refines the 4mm blade stock into a sturdy tip. There is a small fuller (or “blood groove”) on the flat of the blade, a design element often found on Sibert’s custom knives. These components all combine to form a blade that is very strong and functional. While this thick blade doesn’t make for the finest slicer, the flat grind is surprisingly capable. The weight and geometry allows this knife to chip and I wouldn’t be surprised if this knife could hold up to even more demanding tasks like prying and batoning. It’s a surprisingly versatile design and allows the 275 to work in a variety of situations.

Benchmade went with D2 for the blade steel here. I don’t have a ton of knives in D2, but in my experience I have found it to be a very tough and durable steel. Here it has been hardened to 60-62 HRC, and in my experience it is not the easiest steel to sharpen. The good news is that it will take a nice edge, and edge retention blade is quite good. I generally like D2 but I wonder if it was the best choice for a knife meant to be used by soldiers in the field, where access to sharpening tools is limited.

Because D2 is often regarded as a “semi-stainless” steel (D2 technically isn’t stainless) it is more prone to corrosion than a true stainless steel. For that reason you will want to be careful to keep the blade clean and dry (and possibly oiled depending on where you live). Benchmade helped mitigate any potential corrosion by applying a durable black coating to the blade.

Handle, Ergonomics and Pocket Clip

The 275’s handle is made of G10 over stainless steel liners. Everything is screwed together and there is a partial backspacer by the pommel. The liners have been milled out to reduce the weight (somewhat) and everything has been nicely finished. Like the rest of the knife, this is a very large and sturdy handle. Shown here is a limited edition of the knife with black handle scales and a black blade. I actually prefer the regular version of the knife that comes with tan scales and a black blade. It’s just a little different, and sets the knife apart from the sea of black handled knives already in my collection.

The ergonomics of the Adamas are as solid as the rest of the knife. The large handle offers plenty of room for any style of grip and there is jimping everywhere. The thumb ramp offers great control and additional texturing in the choil region prevents your fingers from slipping forward on the blade. The knife feels just as comfortable in a reverse grip with a great spot for your thumb and tons of texture.

If there were an Achilles heel on the 275, it would have to be the pocket clip. First off, I like how it’s a discrete clip that rides reasonably low and offers ambidextrous tip up carry – that is all great. Where the clip misses it’s mark (for me at least) is the lack of retention. You can see in the video that the clip doesn’t even touch the handle, and that the clip has a lot of spring to it. A knife this heavy really needs a stiffer clip to hold it in place. If Benchmade stuck one of their classic clips on there I think it would have worked out better – but the bolt pattern is different so it can’t be swapped out. [Update – I’ve since been told that the pocket clip issues have been fixed, and the clip now offers much better retention. Kudos Benchmade!]

Since we are talking about carry, I want to mention that the 275 Adamas comes with an optional carry pouch. The pouch is made out of nylon, is MOLLE compatible, and comes with a malice clip. For low-speed high-drag guys like myself it’s about as useful as an extra hole in the head, but if you are a military operator or regularly wear MOLLE compatible gear it could be a good way to carry this heavy knife.

Deployment and Lockup

The Adamas makes use of ambidextrous thumb studs. These thumb studs are easy to get at and allow you to flick this big blade open with surprising speed. The action is extremely smooth thanks to some oversized phosphor bronze washers. I love how Benchmade doesn’t skimp on details like the washers, it really gives the knife a quality feel. The 275 should deploy smoothly and easily under almost any conditions.

The 275 makes use of an oversized Axis lock. Not only is the lock bar extra wide to accommodate the huge handle, but it’s much thicker than the normal Axis lock found on models like the Griptilian. Benchmade claims this knife can withstand 800 pounds of force, and that is extremely impressive. And of course this axis lock is fully ambidextrous and the knife easily closes with 1 hand. It’s phenomenal.

Benchmade 275 Adamas Review – Final Thoughts

If tank like construction is your primary concern, and you can get around the 7.7 ounce carry weight, the 275 Adamas is pretty dang cool. But if you are looking for a lightweight EDC or folding tactical knife, then I would suggest looking elsewhere. I will say that the materials are all top notch, the knife is extremely well built, and the price is very reasonable. I would prefer a stiffer pocket clip (an issue that has now been addressed), and a blade steel other than D2. Aside from that I really couldn’t find much to complain about.

My guess is that the sheer size and weight of this thing will be the biggest deal breaker for people, and I totally respect that. But if you want a knife that will take a lot of abuse, and weight really isn’t a concern, then the Adamas could be just what you are looking for. I certainly have been enjoying mine.

Benchmade - Adamas 275BKSN Knife, Plain Drop-Point, Sand Handle, Made in the USA

HIGH-QUALITY: The D2 stainless steel blade holds an edge exceptionally well. The G10 handle is durable and stable enough for a wide range of temperatures, making it ideal for tactical use.
WELL-DESIGNED: Benchmade’s AXIS lock is exceptionally strong and fully ambidextrous. The Adamas 275 is a manual knife that can be opened and closed single-handedly.
COMFORTABLE: The 275 is rugged yet comfortable to hold and use. The reversible pocket clip and Cordura sheath offer ultimate accessibility.
VERSATILE: The Adamas 275’s drop-point, utility blade style serves well for a variety of tasks. It’s one of Benchmade’s top picks for versatile, tactical knives.

I recommend purchasing the Benchmade Adamas from Amazon and BladeHQ. Please consider that buying anything through any of the links on this website earns a small commission to help support BladeReviews.com at no cost to you. This support keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

DPx HEST/F 2.0 Review

by Dan Jackson 22 Comments

Last Updated: March 3, 2018
A hard use frame lock with multi-tool capabilities, the [easyazon_link asin=”B006QFBOG2″ locale=”US” new_window=”default” nofollow=”default” tag=”brdfkdfk-20″ add_to_cart=”default” cloaking=”default” localization=”default” popups=”default”]DPx HEST[/easyazon_link] is a unique offering from a small company with an interesting pedigree. The HEST is designed by journalist Robert Young Pelton, who is known for traveling to dangerous places and going after the stories few journalists dare to pursue. RYP is the founder of knife company DPx Gear, and designed the HEST for those kinds of dangerous excursions and his adventurous spirit is reflected in nearly every aspect of the knife. In fact, DPx stands for “Dangerous Places Extreme” and HEST stands for “Hostile Environment Survival Tool.”

Buy the DPx HEST at BladeHQ

[easyazon_cta add_to_cart=”default” align=”center” asin=”B00CHK40VQ” cloaking=”default” height=”42″ key=”tall-orange” localization=”default” locale=”US” nofollow=”default” new_window=”default” tag=”brdfkdfk-20″ width=”120″]

While I can’t say that I took my HEST 2.0 to any dangerous places or particularly hostile environments, but I did EDC the knife for a while. So with that in mind I’ll attempt to uncover some of the nuances of this unique offering from DPx.

General Dimensions and Blade Details

The HEST has an overall length of 7.63″, has a 3.1″ blade, and it weighs 5.1 ounces. 5.1 ounces may seem kind of chunky on paper, but honestly the HEST feels fairly light for it’s size. Or maybe I’ve just been spending too much time playing around with incredibly beefy Zero Tolerance folders… either way I think the HEST is not too big for EDC although it’s definitely billed as a hard use tool and will be overkill for most typical urban and suburban EDC tasks. I also want to mention that the HEST has been manufactured by LionSteel, an Italian knife manufacturer known for their innovative designs and high quality cutlery.

The blade is a modified drop point defined by a massive belly forming a needle sharp tip. I like the bold and aggressive lines – it’s a unique shape for sure. Adding further interest to the knife is the 5mm thick blade stock. This is quite impressive for a medium sized folding knife, and reinforces the hard use mantra RYP ascribes to. The knife has been given a high flat grind, so it’s still a decent slicer. Rounding things off is a bottle opener. I typically carry a small bottle opener on my keys, but you can never have too many cap lifters and it’s inclusion makes for a memorable blade shape.

DPx selected D2 tool steel for the HEST, and I like their choice. D2 is often referred to as a “semi-stainless” steel. It’s actually a high carbon tool steel, but it will not rust as easily as say, 1095. What I like about D2 is the great combination of edge retention and toughness it offers. It will still rust however, so I’m glad DPx went with a high quality Diamond Like Carbon (DLC) blade coating – it both looks good and will make maintenance a little easier.

Handle, Ergonomics and Pocket Clip

The HEST features a thick olive drab G10 scale on one side of the handle. On the other side, the HEST has a full titanium slab which doubles as the frame lock. I really like the way the handle has been finished. The G10 has been crisply contoured and the titanium slab has been given a beautiful stonewash. Everything bolts together with a partial backspacer. The handle slabs are nice and thick, and there is a real feeling of quality with the way this handle has been put together.

The DPx HEST benefits from a solid ergonomic plan. First of all, the handle is a good size and it’s shaped in a way to capture your fingers. There is also a nice thumb ramp with excellent jimping that doubles as a set of wire strippers. I’m not sure how well it actually strips wire, but it does a great job of holding your thumb in place. The G10 is roughly textured but the knife feels very comfortable thanks to the well contoured edges.

The knife feels good in reverse grip too, provided you do not have the optional glass breaker in place. The glass breaker actually holds the pocket clip in place, so DPx also includes a flat replacement screw and a little one piece multi-tool that works to replace the glass breaker, remove the pocket clip and adjust the pivot screw. I’d recommend swapping out the glass breaker if you plan on using this knife in reverse grip a lot.

Speaking of pocket clips, the HEST has a nice deep carry clip. I’m not a huge fan of how the “H.E.S.T.” insignia is emblazoned on the clip, but the hardened stainless steel clip is nicely stonewashed to match the handle slab and does offer great retention in the pocket. As for mounting options, it’s right side tip up carry only. DPx also offers a left-handed version for southpaws like myself.

Deployment and Lockup

The HEST makes use of ambidextrous thumb studs for deployment, which are large and easy to get at. DPx also selected teflon washers for the knife, which personally I’m not a huge fan of. Now, I’ve received some interesting feedback from readers in defense of the teflon washers, and I agree that they do make for a smooth deployment. I prefer phosphor bronze washers because they are more durable, only get smoother with time, and generally like to flick open faster. But I also acknowledge that some people prefer teflon, and they are found in a good number of high end knives (especially Japanese and European folders). So teflon washers must be good for something, right? So I will leave this as an “it is what it is” situation. If you like teflon washers then you will love the HEST 2.0.

Unfortunately, lockup also raises a couple issues with the HEST. One thing I noticed about my particular knife is that the lock sticks a little. It’s mildly annoying, but in my opinion it’s better than blade play (or even worse, total failure of the lock). After posting my video review of the knife I received a couple suggestions to apply graphite to the lock face. This actually eliminated my sticky lock issue, which is great, but I wonder how long this fix will last. So far so good, but I can’t say the initial lockup inspired a ton of confidence. For this reason, I avoid using the bottle opener feature as a wave to rapidly deploy the knife. Given my already shaky experience with the lock I didn’t feel like the knife was really designed for the stress of being repeatedly waved open. I know some (many?) will disagree, and that is fine.

I also noticed that several people have mentioned that their HEST 2.0’s exhibit some blade play. I didn’t experience that with my knife, but having noticed that my lock sticks a little I could see how play might develop. I know some people like to use the bottle opener as a wave feature – guys, I do not recommend waving this knife or being overly rough with deployment. Most framelocks can’t take being flicked open repeatedly and I don’t think repeatedly subjecting your HEST to the force of waving the knife open is a good idea if you want your frame lock to go the distance.

Finally, I wanted to mention the RotoBlock, which is a cool innovation from LionSteel. Basically it acts as a lockbar stabilizer (which prevents over-extension of the lock upon disengagement), but it can also be cinched down to keep the lock from accidentally disengaging. This is a neat little invention and I’m happy to see it on the knife.

DPx HEST 2.0 Review – Final Thoughts

All in all I like the HEST 2.0. When you consider the high quality materials, interesting design and beautiful finishes it’s almost hard to believe the knife can be had for $175 brand new. There are a lot of little things that set the HEST apart from the pack, and I like the bold lines and aggressive look of this knife. One thing I don’t normally talk about is the packaging. The HEST comes in a beautiful box with a nice manual. The inclusion of the little skull multi-tool is another nice touch. It’s obvious a lot of pride went into the design and implementation of this knife.

However, I have to admit I’m somewhat concerned about my lock. A sticky lock isn’t dangerous, but it is annoying. I was able to stop the lock from sticking by adding some graphite to the lock face, but am not sure how great of a fix this is. I’m also suspicious of blade play developing, as I’ve heard that is possible from a couple reputable sources.

So the HEST is a cool knife, but it’s not perfect. If an extremely consistent frame lock is important to you, I might recommend something like the rock-solid Zero Tolerance 0550 or the wonderfully done Spyderco Sage 2 instead. Or if you are in love with the design, perhaps consider one of the many cool [easyazon_link asin=”B00DSVU9RM” locale=”US” new_window=”default” nofollow=”default” tag=”brdfkdfk-20″ add_to_cart=”default” cloaking=”default” localization=”default” popups=”default”]fixed blade versions[/easyazon_link] of the knife. That said, I still think that the HEST has its merits. If you like the design it’s a cool knife and that is worth considering.

DPx Gear HEST 2.0 – $175.00
Retail Price: $218.75
You Save: $43.75
from: BladeHQ

[easyazon_block add_to_cart=”default” align=”center” asin=”B006QFBOG2″ cloaking=”default” layout=”top” localization=”default” locale=”US” nofollow=”default” new_window=”default” tag=”brdfkdfk-20″]

I recommend purchasing the HEST at BladeHQ or [easyazon_link asin=”B00DSVU9RM” locale=”US” new_window=”default” nofollow=”default” tag=”brdfkdfk-20″ add_to_cart=”default” cloaking=”default” localization=”default” popups=”default”]Amazon[/easyazon_link]. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

Spyderco Paramilitary 2 Review

by Dan Jackson 50 Comments

Last Updated: July 13, 2019
Poll any knife reviewer, knife YouTube Channel, or knife forum, asking what the best Every Day Carry (EDC) knife is, and the Spyderco Paramilitary 2 is going to come up time and time again. It’s a rock star in the EDC world, and for good reason. It’s a form follows function design with great cutting ability, great ergonomics, and that difficult to describe “X” factor that keeps people coming back year after year.

Buy the Para 2 at BladeHQ

Buy on Amazon

I originally purchased and reviewed this knife in 2012. Looking back, the review is a little stale, but the knife continues to be in my personal rotation of daily carry blades, and it continues to have captured the hearts and minds of knife enthusiasts around the globe. So I am going to try to break down why the knife is so good in this updated Spyderco Paramilitary 2 review.

And let me assure you that this is not some flash in the pan hot take. I’ve owned this knife for over 5 years now, and have compared it to hundreds of knives. I’m giving the review a major update in 2018. So strap in and lets explore why this USA Made gem continues to hit all the buttons for edged enthusiasts.

General Dimensions and Blade Details

The Para 2 has an overall length of 8.3″, a 3.4″ blade, weighs 3.75 ounces, and is made in the USA. This is a larger knife, designed to be either a tactical knife or a heavy-duty utility folder. I also know that for many, this is an EDC knife. Personally, the Para 2 is a little bigger than what I typically like to carry, but my knife has seen plenty of use on the weekends.

I must not be alone in finding the Para 2 on the large side, because in 2017 Spyderco released the Paramilitary 3. Ben wrote a full review on it.

The Para 2 features a classic Spyderco drop point blade. It’s been given a full flat grind and is made from 3.5mm blade stock. The knife has a nice amount of belly, an excellent tip and has proven to be a tremendous slicer. Rounding things out is a well ground edge that came extremely sharp. I have found that this is a great knife for food prep. For example, I had to slice a lot of large ciabatta rolls, and the 3.4″ blade really made easy work of the task.

You have the option of a satin finish (shown here) or a diamond like carbon (DLC) coating for the blade on your Paramilitary 2. I like DLC coatings a lot, they are about as good as a knife coating can get, but I have no experience with Spyderco’s formulation. I can say that everything I read about their DLC coating was favorable, and I love my satin finished version.

Blade steel is the very capable S30V. Knife enthusiasts won’t need me to say much about S30V, it has been popular for close to a decade now. But for the uninitiated this is an all around excellent steel. It has been usurped by S35VN and other even more premium steels over the year, but S30V remains more than adequate for most people. S30V is relatively easy to sharpen, takes a very nice edge, and can hold a good working edge for a very long time. It’s also quite resistant to rust and corrosion.

Spyderco has released a number of sprint runs of the Paramilitary 2 over the years in a wide range of exotic steels and handle colors. I’d like to see them upgrade the standard Para 2 to S35VN or CTS-XHP at some point. For the time being a premium version of the knife in S110V with blurple scales is available (apparently as a non-sprint run on Spyderco’s regular lineup for the foreseeable future).

And here is a size comparison with the Para 2 next to my Sage 1:

Handle, Ergonomics and Pocket Clip

The Paramilitary 2 handle is black G10 over nested stainless steel liners. The liners have been milled out somewhat to reduce the weight, and at 3.75 ounces the knife is very light overall. The corners have all been nicely rounded and the liners sit flush with the G10. Everything is screwed together and you have an open construction design with 2 pillars and a very large lanyard loop. All in all, handle construction is top notch.

The ergonomics on the Para 2 are outstanding. Spyderco has once again made excellent use of a 50-50 choil to give you more options and better control over your knife. A 50-50 choil is a finger choil made from both the blade stock and the handle. What I like about this is that you have the option of setting your hand back on the knife to maximize reach, or you can choke up for more detailed cutting tasks. Either way the handle is plenty big and extremely comfortable.

The 50-50 choil is part of the reason why so many Spyderco knives consistently get excellent ergonomic ratings from me. Rounding things out is perhaps one of the best jimped thumb ramps I’ve ever come across. The jimping is just phenomenal on this knife. It practically super-glues your thumb in place without being so toothy it’s uncomfortable.

The pocket clip is a standard Spyderco hour-glass shaped clip. It’s large and has a bright satin finish. It offers good retention and a decently deep carry. The clip works, but I’d love to see a blackened deep carry clip to come standard. That would make the knife more discreet in your pocket. Casey Lynch has developed a deep carry titanium pocket clip for the Para 2, and frankly I think I should get one of these. The standard Spyderco clip works, but it’s not my favorite.

The Spyderco Paramilitary 2 carries great in the pocket. Although this is a larger knife, the Para 2 is thin and relatively lightweight, so it doesn’t weigh down your pockets and doesn’t create much bulk. It’s no Dragonfly II, a knife I routinely forget I’m carrying, but the Para 2 carries surprisingly well for a larger knife thanks to the thin design.

Deployment and Lock

Deployment on the Paramilitary 2 is accomplished via an oversized Spyder-hole. And I really do mean oversized. At 14mm in diameter it is really a much bigger thumb hole than I am used to – but I quickly grew accustomed to it and now I absolutely love it. Deployment is incredibly, fast, smooth and consistent. This is a great knife to use with gloves and it ensures a smooth and effortless deployment with every flick. Backing up that oversized thumb hole is a pair of large phosphor bronze washers. These washers are very smooth and only get better as the knife breaks in. So deployment is just outstanding.

The Spyderco Paramilitary 2 makes use of a compression lock to lock the blade open. This is my first review of a knife with a compression lock, and my impressions of the mechanism are extremely favorable.

At first glance this might just appear to be a liner lock on the back of the knife – in practice that really couldn’t be further from the truth. The compression lock works by wedging a piece of the liner between the tang and a stop pin. As force is applied to the knife (from either the spine or the edge) the lock compresses and the sandwich of tang, liner and pin hold the blade firmly in place. The harder you push on the knife, the tighter the lock gets. It’s an incredibly strong design and is really quite ingenious.

There is no blade play of any kind with my knife, and the compression lock is easy to use with one hand. I like how you can disengage the lock and fold away the blade without placing your fingers within the path of the blade.

Another thing I really like about the compression lock is how easy it is to disengage with one hand. It may take a little practice at first, but it’s easy to close the knife one hand without putting your fingers anywhere near the path of the edge – a total impossibility with a liner lock or frame lock. This makes the knife infinitely fun to manipulate. In terms of pure blade-flicking enjoyment I rank it right up there with an axis lock. I’ve heard some accounts of the lock being sticky, I have not experienced that personally and would think that any stickiness would go away as the knife breaks in.

Here is a parting shot of my Para 2 next to the Benchmade Griptilian. And while I’m at it, here is a link to an article I wrote on the Spyderco Paramilitary 2 vs. the Benchmade Griptilian if you are trying to decide between the two.

Blade centering on my knife is perfect.

Spyderco Paramilitary 2 vs. Para 3

I’m sure many readers are looking for a size comparison between the Para 2 and Para 3. Ben reviewed the Para 3 back in 2017, and I acquired and reviewed a Para 3 Lightweight in 2019. Here is a size comparison between the two knives:

As you can see the Para 3 is significantly shorter. Now, I’ve got the LW version of the Para 3 so this isn’t exactly an “apples to apples” comparison, but the major difference between the Para 2 and 3 that I noticed is the shorter handle of the Para 3. It’s a good deal shorter. I’ve found the ergonomics aren’t quite as good on the Para 3, but it’s much more pocketable. That’s the biggest trade off.

You sacrifice some comfort and blade length for a smaller, easier to carry knife. True Spyderco fans will inevitably acquire both.

Spyderco Paramilitary 2 Review – Final Thoughts

The Spyderco Paramilitary 2 is just an outstanding knife. It’s no surprise that this is the EDC of a lot of serious knife collectors. If you poll a group of people who routinely purchase $100-500+ knives, odds are very good that a Paramilitary 2 is a serious part of their EDC rotation. This is for very good reason. You have a tough knife with premium steel that is wonderfully balanced, highly ergonomic, and extremely functional. When you factor in the ~$100 price tag and fact that it’s made in the USA, well, the knife just speaks for itself.

If you want a workhorse of an EDC or a robust folding tactical knife, I think that the Paramilitary 2 should be very high on your list. It easily makes my best EDC knives list and receives my highest endorsement.

Spyderco Para Military 2 EDC Folding Utility Knife - 3.42" CPM S45VN Steel Blade and Durable G-10 Handle, PlainEdge - C81GP2

Robust Yet Lightweight Build - Weighing just 3.8 ounces with an overall length of 8.26 inches, the Para Military 2 combines durability with portability. Perfect for EDC enthusiasts, outdoor adventurers, and tactical users.
Superior Blade Performance - Features a 3.45-inch full flat-grind CPM S45VN stainless steel blade for exceptional edge retention, precision cutting, and corrosion resistance. Its razor-sharp edge excels in everyday and heavy-duty tasks.
Ergonomic G-10 Handle for Comfort - The black G-10 handle is contoured for an optimized grip, ensuring comfort and control during prolonged use. Lightweight yet durable, it balances functionality with a sleek, refined design.
Excellent Compression Lock System - Spyderco's innovative Compression Lock provides rock-solid locking strength with one-handed ease. It ensures secure blade deployment and prevents accidental closure during rigorous use.
Customizable & Versatile Pocket Clip - The steel clip supports both tip-up and tip-down carry options, ensuring convenience for right-handed users. Whether for work or casual use, it allows for easy access and quick deployment.

I recommend purchasing the Spyderco Paramilitary 2 at Amazon or BladeHQ. Purchasing anything through any of the links on this site helps support BladeReviews.com, and keep this review train running. As always, any and all support is greatly appreciated.

Zero Tolerance 0350 Review

by Dan Jackson 38 Comments

Last Updated: April 5, 2020

My Zero Tolerance 0300 got a lot of looks when I carried it around. At over 9″ long and with a weight of 8.6 ounces, it definitely raised some eyebrows. The excellent S30V blade was a force to be reckoned with, and I really enjoyed the loud “thwack” of the assisted opening. It was generally a really cool knife to carry, but lets be real, it’s not always practical to tote around such a beast of a blade every day. After a while a knife of that size (and weight!) might get pushed to the back of your EDC rotation, to eventually fall off into a dark corner of your knife collection.

Buy the Zero Tolerance 0350 at BladeHQ

Buy on Amazon

So the good folks over at Zero Tolerance decided to tone things down a little and offer a slightly tamer, yet no less cool version of the original 0300; the Zero Tolerance 0350. This little brother packs many of the great features that made me fall in love with the 0300, but comes in a size that is much more practical for many people to EDC (although it’s still a big knife – lets not kid ourselves). Lets take a closer look and see what the ZT 0350 is all about.

General Dimensions and Blade Details

WHile the 0350 is not as portly as it’s big brother, it still is not what I would call a “small knife.” The 0350 has an overall length of 7-5/8″ a 3-1/4″ blade and a weight of 6.2 ounces. So it’s still on the heavy side, and perhaps still too big for some to EDC, but if a sturdy good size folder is what you are after I don’t think it’s a huge issue.

The blade is a modified drop point design. There is a small recurve and tons of belly. This is the same blade shape found on the 0300, just shrunk down slightly. I like how the tip has been left very strong. The tip of the 0350 has good piercing strength, and the high flat grind makes the knife excellent for slicing. While recurves can be a pain to sharpen, they really help feed material into the edge and are great slicers. ZT rounded things off by applying a beautiful edge and laser engraved hallmarks. This is a great blade shape a wide variety of applications.

The steel on this knife is S30V, which is absolutely awesome stuff. I am a big fan of S30V because it holds a very nice edge for a long time, and is still reasonably easy to sharpen. S30V is also resistant to rust and corrosion. Zero Tolerance applied a very nice DLC (diamond like carbon) coating to the knife, which is about as durable as knife coatings get. In summary, this is a great blade shape made of great steel with a great coating applied to it.

Handle, Ergonomics, and Pocket Clip

The ZT 0350 features a classic handle formulation – black G10 over very thick stainless steel liners. The handle has been meticulously finished – I absolutely love how everything lines up perfectly, and there isn’t a machining mark to be seen. As far as construction goes, everything is held together with torx bolts, and you have a partial G10 backspacer. My only suggestion for Zero Tolerance would be to mill out the liners a little to perhaps shave off a few tenths of an ounce. Really though, this handle is built like a tank and finished like a Swiss watch.

The ergonomics on the 0350 are extremely satisfying. I wear a large glove and it feels like the knife was custom made for my hand. The width and thickness to the handle really fills the palm while the choil and thumb ramp prevent your fingers from slipping forward. The G10 has a medium level of traction, which is very pleasant feeling and offers good feedback. In reverse grip there is additional jimping for your thumb. All in all it’s a very comfortable and secure grip.

The pocket clip is right out of the Kershaw parts bin and is simple, but effective. First of all, it’s unobtrusive with it’s flat black coating. It has excellent retention, which I find extremely important for a heavier knife – this means that the knife won’t slide around your pocket (or worse, fall out entirely). The fact that this is a true 4 corners clip (ambidextrous tip up or tip down carry) almost brings a tear to my eye. This is truly a well done pocket clip.

Actual carry isn’t that bad. I found the knife is about as unobtrusive as 6+ ounces can get, although it’s certainly a change from say, my more typical 3-4 ounce EDC knives. For guys who regularly carry larger knives, I don’t anticipate any problems at all.

Deployment and Lockup

The ZT 0350 gives you the option of either a flipper or thumb studs for deployment. In practice, only the right hand thumb stud is available (the left side sits too close to the handles) but my preference is for the flipper anyways. Either way the knife springs to life with very little effort due to the stellar Speedsafe assisted opening mechanism and high quality phosphor bronze washers. This is a knife that fires hard and fires fast. And on a tactical knife, this kind of easy of deployment can be the difference between life and death. If assisted opening knives aren’t your thing, it’s easy enough to remove the spring – deployment will be smooth regardless.

Lockup on the 0350 is accomplished by a very beefy liner lock. This is a very well executed liner lock, and it bites in early with plenty of room for wear. One of the biggest differences between the 0350 and the 0300 is the absence of the titanium framelock, but I have just as much confidence in this very thick liner. It almost goes without saying, but I didn’t detect blade play in any direction.

Zero Tolerance 0300 or Zero Tolerance 0350?

A common question people have is whether they want the ZT 0350 or the larger ZT 0300. If you are one of those people, I made a video comparing the two knives.

Zero Tolerance 0350 Review – Final Thoughts

The Zero Tolerance 0350 is an absolutely outstanding knife. I love everything about it, from the choice of materials, to the incredible fit and finish, to the stellar design, to the great ergonomics, right on down to the excellent pocket clip. I am also very pleased to see that this knife is made in America and still comes in at a decent price.

Currently these can be had for right around $100. When you consider how well this knife is made, I think it represents an excellent value – especially when the 0300 costs over $200. It’s been a real pleasure having this knife in my collection and it really makes me excited to review more Zero Tolerance knives in the future. The company really seems to know how to put together a great blade and am truly excited to see what they have coming up next.

Zero Tolerance 0350 Folding Pocket Knife; 3.25” S30V Stainless Steel Blade with Black Tungsten DLC Finish; Textured G-10 Handle Scales, SpeedSafe Assisted Opening, Liner Lock, Quad-Mount Clip; 6.2 OZ.

High performance and premium quality S350V stainless steel makes the recurve blade extremely durable, corrosion resistant and wear resistant
Non-reflective black Tungsten DLC (Diamond-Like Carbon) blade coating and black G-10 handle scales cleanly pair together for a sleek, smooth
Quad-mount pocket clip convenient for left or right handed, tip-up, or tip-down carry
Ideal EDC, easy folding pocket knife for everyday tasks—survival tool, precision cutting, self-defense, tactical use or the perfect gift
General all-purpose knife great for EDC or use while working, camping, fishing, hunting, utility or any outdoor activity

I recommend purchasing the Zero Tolerance 0350 at Amazon.com or BladeHQ. Purchasing anything through any of the links on this site helps earns BladeReviews a small commission at no cost to you, and keeps this review train running. As always, any and all support is greatly appreciated.