EDC Knives

Kershaw Needs Work Review

Last Updated: August 21, 2019
In my opinion the wharncliffe is one of the most under-appreciated blade shapes out there. Many may write the shape off as a novelty, but in my experience a wharncliffe blade can be incredibly useful for a lot of every day tasks. That’s why I wanted to make sure I eventually got down to reviewing one of my favorite production knives with a wharncliffe blade, the Kershaw Needs Work.

Buy the Kershaw Needs Work at BladeHQ

Buy on Amazon

At first glance this knife appears to be more at home on the set of an “Aliens” sequel than in your pocket. This is another Ken Onion design, and one of his more radical blades. I’ll admit, the look of the Needs Work had to grow on me a little, but I quickly warmed up to it. Today I really like the looks of this knife and the performance as well. I think Ken and Kershaw did a great job representing the “wharnie” here.

Purpose

To provide a little context, I would mainly classify this as a utility knife. That is, a knife that is used to cut a lot of boxes, leather, carpet, etc etc – a dedicated work knife for your shop or tool box, or to be carried while working a physical job with a lot of cutting tasks. The wharncliffe shape essentially provides a 3 inch razor blade, and the fine tip allows for unmatched precision.

I am hesitant to classify (or recommend) this as a full blown EDC knife, mainly because it doesn’t carry particularly well. However, it all boils down to what you want to use the knife for.

General Dimensions and Blade Detail

The Needs Work has a 3″ blade, a 4 1/8″ handle and weighs 3.5 ounces. This is a stout little folder designed for light and medium duty use. As you are well aware by now, the NW has a wharncliffe shaped blade. The NW’s blade is .12″ (3mm) thick – this is a thick piece of metal for a small folding knife.

From a design standpoint, Ken Onion gave this blade some of his characteristic flair. The blade includes gentle sloping curves and a nice little swedge. It’s a simple design that I really like. A hollow grind begins about half way down the blade.

The tip on this knife is exquisite, and will let you make very precise cuts. If you go through a lot of boxes, or cut stuff like carpet I highly recommend this blade shape. The angled handle only accentuates this feature. On the flip side, the fine tip means it could break – if you do a lot of thrust cuts or want a “hard use” knife I’m not sure the tip will hold up.

My Needs Work came with that gray matte finish popular on a lot of Kershaw knives (like the Skyline). You may also be able to find this knife with a black titanium nitride coated blade as well.

Kershaw went with Sandvik 14C28N stainless steel for the blade here, a steel I am very familiar with. It holds a very nice edge and sharpens easily. My only advice would be to keep an eye out for rust, I’ve noticed a couple small spots form on my Skyline.

Handle Ergonomics and Pocket Clip

The Needs Work has a beefy handle with glass-filled nylon scales over full stainless steel liners. The thick handle offers good grip, but makes the knife a little harder to carry. The scales have been given a really unique pattern. It’s got a kind of organic alien looking vibe to it. I am not crazy about the pattern, but it’s not really seen as a negative either. There is a full backspacer and the liners have not been milled out.

The ergonomics on the Needs Work are pretty good. I noticed a lot of people raving about the ergos, but I found the handle to be a little small for my relatively large hand. I can squeeze all 4 fingers on the grip, but realistically, this is a 3 finger knife for me. It’s still a comfortable knife but my pinky does feel a little lonely there. The thumb ramp and choil are well defined and there is adequate jimping on both. The thick handle does feel good and the textured pattern provides some response. For some reason I really like throwing the NW into a reverse grip; the handle is well suited for it.

Perhaps the biggest ergonomic feature is the angle of this handle. This allows you to take full advantage of the fine tip. The Needs Work could be a great knife to cut dry wall, carpet or similar flat materials. I found it to be very convenient when I had to trim some posterboard for the background on my little photography studio. More conventional blade shapes (and handle angles) would make you rotate your wrist further to use the tip of the blade for precision cuts. The Needs Work is a much better design for those kinds of tasks.

Sadly, the pocket clip is something of an abomination. Right off the bat, you are limited to right-side tip-down carry only. Furthermore, the large (ugly) clip rides high in the pocket, adding insult to injury. In practice, I actually found the tip down carry to be OK given the flipper and assisted open. I’d much rather see some mounting options and a little more conventional looking clip. The clip and thick handle are the two main reasons why I am hesitant to recommend this as an EDC blade.

Deployment and Lockup

Deployment on the Needs Work is awesome. This is a speedsafe assisted opening knife, and the spring on this the NW shoots the blade of this knife out like a gun. This is a wicked fast deployment that makes an awesome cracking sound as the blade locks open. This is one of my favorite assisted openers; the cool blade shape and rapid deployment are too much fun.

Opening is only accomplished through the flipper – not an issue here at all.

Lockup on the Needs Work is equally impressive. The NW uses a very interesting liner lock that requires no stop pins. The tang of the blade locks into the liner at two different places. It’s hard to describe but very solid in practice. There is zero blade play in this knife, which is awesome when you consider how much force this lock is put under by the assisted opening.

Kershaw Needs Work Review – Final Thoughts

I really like this one. The unique blade, the chunky design, the lightening fast deployment and super solid lockup – these are all major plusses. Also, I found the wharncliffe blade to be uber useful. That tip allows you to do detail cuts like no other knife. I also love how the Needs Work was made in America, and can be found for right around $30. Also, the fit and finish on mine is great. Blade centering is perfect, the grinds are smooth and even – everything was well put together. This is a knife I am proud to add to my collection.

That said, I do ding the knife a little for it’s pocket clip – that’s my only real issue here, and to be honest it still carries pretty well considering. If you want a rugged utility knife, or are searching for something a little different I recommend the Needs Work.

Kershaw Work Knife with Black Injection-Molded Polyimide Handle and Sandvik 14C28N Stainless-Steel Blade

Just connect in the lightning flash drive, easily move photos, videos and other files off your iPhone or iPad and onto the flash drive, from the drive, you can also transfer these files into your Mac,PC or other devices.
Connect and play,enjoy movies or musics stored in the flash drive when you are on trip or travel, most video formats are supported: (VIDEOS: AVI, M4V, MKV, MOV, MP4, MPG, RM, RMVB, TS, WMV, FLV, 3GP; AUDIOS:FLAC, APE, AAC, AIF, M4A, MP3, WAV)
Every time you connect the flash drive in, use "Y drive" App camera to take photos/video ,which will be automatically stored into the flash drive.
Mfi Certified flash drive guarantees fast and stable data transfers,one HD movies ( approx. 1GB) only needs about 20s.
iPhone X 5 5s 6 6+ 6s 6s+ se 7 7+; iPad (iOS 8.0 or higher), Computer OS Support Mac OS X v10.6+, Windows 7/8/10

I recommend purchasing the Kershaw Needs Work at Amazon or BladeHQ. Thanks for checking out my review.

Cold Steel Recon 1 Review

by Dan Jackson 25 Comments

Last Updated: July 15, 2019
I love it when knife companies refine their existing designs. Don’t get me wrong, I’m all for new and exciting models, but I’m almost more excited when a “good” knife turns into a “great” one. Cold Steel did just that with their latest version of the Cold Steel Recon 1. The new version (released in 2010) of the Recon 1 is lighter, has a stronger lock and a smarter design. What that leaves us with is a refined hard-use folding knife at a price almost anyone can afford.

Buy the Cold Steel Recon 1 at BladeHQ

Buy on Amazon

Purpose

The Recon 1 is a large folding tactical knife or utility knife. Many people will not want to EDC the Recon 1, but I’ll say for a larger knife it is an extremely strong and relatively light EDC option. This could also be a decent trail knife/backup knife – I’ve seen people actually baton wood with this thing. Obviously these weren’t huge logs, but it’s still pretty incredible for a folder.

General Dimensions and Blade Details

The Recon 1 has an overall length of 9.75″, a 4″ blade, weighs 5.3 ounces, and is made in Taiwan. This is a large folding knife geared towards hard use and self defense applications. Certainly this could be used for every day carry (EDC) if you can swing carrying a knife of this size.

As far as the blade is concerned you have the option of either a clip point (bowie) blade shape, American tanto, or spear point blade shape (not shown here). All blade configurations come hollow ground and have the option of plain or partially serrated edges.

My personal preference is for the clip point or spear point blade shape, as I find the belly is useful for EDC. Regardless, the blades are all ground thin and cut nicely. If you need the additional tip strength of a tanto, or just like the look, then this is a great model to pick up with a tanto blade.

Cold Steel originally chose Aus 8A for the blade steel here. The Aus 8 version of the knives are shown here, and these are what I used for my review. Cold Steel upgraded the blade steel to CTS-XHP around 2016. Although I haven’t reviewed the CTS-XHP version of the Recon 1, I have tested the Ultimate Hunter and Code 4 and the Broken Skull in CTS-XHP. It’s a great upgrade. CTS-XHP is still easy to sharpen like AUS-8, but the edge holding is much better. It’s a great stainless steel and an excellent upgrade for these knives.

Also, the Recon 1 used to come with a teflon coated blade. These coatings chipped off easily and were long considered a downside to the Recon 1. When Cold Steel upgraded the blade steel to CTS-XHP they also started DLC coating their blades. This is a much tougher blade coating, and resists wear far better than teflon. This new coating holds up far better and I’ve had a chance to test it out on my Broken Skull.

Handle, Ergonomics and Pocket Clip

Cold Steel did an excellent job updating the Recon 1’s handle. They went with a linerless design and used two thick slabs of G10 for the handle. Some might find the lack of steel liners troubling on a hard use folding knife, but let me tell you – there is nothing to worry about. This is a very strong handle design (more on that below) and it has a 6061 aluminum backspacer. Everything is bolted together and there is a good size lanyard hole for added security.

The Recon 1 has great ergonomics. A major feature is the deep double choil. This fits my hand like a glove. The handle is thick enough so that it fills the hand adequately and the edges have been rounded for comfort. The roughly textured handle helps to ensure a firm grip under a variety of conditions. Note that there is no jimping on the thumb ramp. In this case, I don’t think the Recon 1 needs jimping, your hand is not going anywhere with this handle design. That said, it certainly wouldn’t hurt.

Due to the curvature of this handle design Cold Steel sells this knife with 2 pocket clips. This is so both left and right handed users can carry this knife comfortably. As a leftie, this sort of thing brings a tear to my eye (almost). I suspect some manufacturers don’t make clips reversible to keep costs down, but to see CS go so far as to make a second clip – well, that is really a statement and doesn’t go unnoticed here. Note that the clips allow for tip up carry only (fine by me) and that the clips has been given the same teflon coating as the blade so expect it to show wear.

Deployment and Lockup

The Recon 1 is deployed with a single thumb stud. The thumb stud is easily reversed with a screw driver, but in a perfect world I’d rather see ambidextrous thumb studs right out of the box. The Recon 1 has a powerful backspring, so it isn’t the easiest knife to deploy, but with a little wrist action I have no problems at all snapping this blade out. And it does snap out, with a loud and authoritative crack. This is a knife that deploys with confidence thanks to a smart design and phosphor bronze washers.

The Recon 1 has the Andrew Demko designed Tri-ad Lock. This lock is phenomenal and is the strongest lock currently on the market. It’s a beefed up backlock with the inclusion of a stop pin. The stop pin takes all the force of heavy duty tasks rather than the locking mechanism. What this means is that this lock will take more stress and punishment than anything else on the market. I’ve tested these locks extensively myself and my results match everyone else’s conclusions – that the Tri-ad lock is nearly bullet-proof.

Recon1 vs. the AK-47 or the American Lawman?

Chances are, if you are interested in the Recon 1, you may also be interested in the AK-47 or the American Lawman. If that is the case, I recorded a video where I do a detailed comparison of these 3 models that you may find useful.

If you still have any questions or are interested in another comparison feel free to leave a comment or contact me.

Cold Steel Recon 1: Final Thoughts

The Recon 1 is an absolute beast of a knife. If you are looking for an inexpensive hard use folder, you really can’t do better than this Recon 1 folder with the Triad lock. The Recon 1 is very similar to the Cold Steel Ak-47 and American Lawman, 2 knives I have previously reviewed. If you are having trouble deciding between the three it really comes down to which knife you like the look of the most. They have minor functional differences but they are all tough as nails and ready for any task.

Also, well after the initial publication date of this review Cold Steel made major upgrades. They upgraded the blade to a DLC coated CTS-XHP blade from a teflon coated AUS-8 blde. The upgrades Cold Steel made to the blade steel and blade coating addressed the 2 biggest complaints I previously had with the knife: soft Aus-8 steel that was serviceable, but didn’t hold an amazing edge, and a teflon blade coating that quickly chipped and looked bad. Granted, these upgrades have raised the Recon 1 from a $50 knife, to more like a $75 knife, but I think you are getting more knife for your money. The Recon 1 has been elevated from a good bargain knife, to an impressive cutting tool.

At the end of the day, if you can carry a larger knife like the Recon 1 you are going to have a hard time finding a tougher pound for pound folding knife. It remains an excellent choice to this day. Personally, I prefer the slightly smaller and more utilitarian looking American Lawman, but if you like the dimensions of the Recon 1 then you won’t be disappointed with this knife.

Cold Steel EDC Tactical Folding Pocket Knife, Recon

The Cold Steel Recon is a strong, durable, and effective mainstay in the world of tactical pocket knives.
The steel blade features DLC coating for long-wearing use. The coating is black, rough to the touch, and super strong against scratches and wear.
Cold Steel's innovation is the safest folding knife locking system on the market, holding 800 lbs of hanging weight.
Folding knife with ambidextrous pocket and belt clip for both right- and left-handed draws. Thin construction does not imprint in the pocket for a stealthy carry. Perfect for battle gear.
A great everyday carry option for self-defense, battooning, stabbing, etc. The scales on the handle around the finger grooves provide excellent grip and ergonomic comfort.

If you are interested in purchasing a Cold Steel Recon 1, then I recommend purchasing it at Amazon or BladeHQ. Purchasing things through any of the links on this website helps support BladeReviews.com and will help to keep the reviews coming. Any support is greatly appreciated. Thank you very much.

SOG Flash II Review

by Dan Jackson 28 Comments

Last Updated: July 29, 2019
SOG is a company that has always intrigued me. They have eschewed the more mainstream model of production knife design, which typically involves a team of in-house designers and a deep roster of freelancers, instead favoring a one man approach. All of SOG’s knives are designed by president and founder Spencer Frazer. This has resulted in some unique design elements and ultimately, some very unique knives.

Buy the Flash II at BladeHQ

Buy on Amazon

The Flash II is a shining example of this, a knife that is quintessentially SOG and decidedly different. This blade has been around the block a time or two (it’s been in production for years), and has passed through the hands of thousands in its various iterations. Today I turn back to the classic drop point version with a plain edge and black handle.

Purpose

For purposes of this review, I am classifying the Flash II as a medium sized EDC and emergency tactical knife. With it’s big blade, grippy handle and assisted opening, the Flash II could easily fill an emergency tactical role. Also, due to the number of different finishes and handle choices available, this could very well be a collectable for fans of the brand.

General Dimensions and Blade Specifics

The Flash II has a 3.5 inch blade, and overall length of 8″ and a weight of 3.1 ounces. Going back to the purpose of this knife, I think the combination of the long blade and light weight make it an interesting emergency tactical option. It also could be practical for EDC if you like a bigger blade but don’t like being weighed down (the Flash I is a smaller version, perhaps more appropriate for EDC).

The blade shape is a very traditional looking drop point. It’s a no frills design with a full flat grind (“FFG”). As something of a traditionalist, this simple style of blade always appeals to me, and the FFG is great for slicing. My Flash II came with a very nice satin finish and a meticulously ground secondary bevel. The satin finish is a finger print magnet, and I find myself constantly wiping this knife down… That probably says more about me than the knife, but it’s something I noticed.

Of course, as one of SOG’s classic models this knife comes in a couple blade shapes (wharncliffe, tanto, and the drop point version shown) and you can also get this blade with a Titanium Nitride (TiNi) coating and some even with tiger stripes.

SOG selected AUS8 blade steel for the Flash II. If you are into steel then you already know about AUS8, it’s a mid range Japanese steel. If you aren’t that into steel, then know that AUS8 takes a sharp edge and holds it pretty well. It’s easy to sharpen and very forgiving. SOG does a cryo treat on this blade which is supposed to improve toughness. I find AUS8 to be entirely adequate and fits the mid range price tag well.

Handle, Ergonomics, and Pocket Clip

The Flash II has a unique, boxy looking handle made of thick fiberglass reinforced nylon (FRN); a reinforced plastic. Some versions sport an aluminum handle and you can find the FRN version in a dozen or more colors. I like the FRN version as it keeps the knife light and doesn’t feel cheap. This is a much denser FRN than what is on say, a Benchmade Griptilian. There are no liners in this handle, which helps with the weight but isn’t without disadvantages (discussed below)…

Ergonomics on this oddly shaped handle are surprisingly good. It’s a chunky design and has no problem filling the hand. The corners have been slightly rounded. For normal use it’s comfortable, and even when holding the handle tightly and carving off long curls of wood it wasn’t that bad. I wouldn’t want to build a tree fort with this knife, but for most tasks I’d say the handle works well. I do like the thumb ramp and dual choils. They help provide control for detail work. The sides of the handles have been given a diamond texture and help with overall grip.

The pocket clip is an ultra deep carry design and is reversible. It’s a tip-up only clip and provides strong retention. It’s kind of a funky looking, definitely another look distinct to SOG. There is also a very small lanyard hole next to the clip.

Deployment and Lockup

The Flash II has an assisted opening. A gentle push on either of the ambidextrous thumb studs snap the blade out in a “flash.” Stupid puns aside, the opening is quick and smooth. Assisted openings can be a matter of taste, but I like it on this knife, especially as an emergency tactical folder. Rapid fool-proof deployment under stress is what I’m looking for an an emergency tactical blade, and the Flash II provides just that.

There is a safety lock on the side of the handle. When the safety is engaged it prevents accidentally opening the knife. For many this will be about as useful as a sock on a chicken’s foot, but it allows SOG to make this assisted opener a tip-up carry knife so I don’t mind. I just leave mine in the “off” position and go about my day.

The Flash II uses what seems like a combination between a bolt lock and a lock back. It’s hard for me to really tell without taking the knife apart, something I’m not quite ready to do. I found that there was some side-to-side play when I had the blade open and locked. I tried adjusting the pivot, and was able to fix it somewhat, but there was still play evident in the blade. Given that this is a linerless design, with what appears to be some sort of bolt lock, I am not really surprised by this. If there was up-and-down play (there wasn’t) I would be concerned as that would suggest that the lock could fail.

If you can live with a little side-to-side play in your knife then I don’t see this as a major issue. If blade play is something you can’t stand, or want to really hard use this knife, then keep this in mind.

SOG Flash II Review – Final Thoughts

All in all I am very happy with the Flash II. I love the blade, can appreciate the light carry, and find the assisted open to be both fun and practical. It’s a quirky little knife that really stands out in a crowd. As a fan of choices I think this is a good thing. The only real negative I could find was the blade play. I’ve done some reading and know I am not alone, but that doesn’t stop this from being a classic folding knife enjoyed by many.

If you want something lightweight, practical and a little different, then I suggest checking out the SOG Flash II.

SOG FSA98-CP Flash II 8in Serrated Blade EDC Knife

QUICK OPEN POCKET KNIVES: The SOG Flash II everyday carry knife serves as a daily carry flip knife with assisted opening tech; these folding knives measure 4.5 inches in closed length with model number: FSA98-CP
FLIPPER KNIFE W/ LIGHTWEIGHT KNIFE HANDLE: A 3.5 inch partially serrated pocket knife blade makes these EDC pocket knives versatile; sharp pocket knife is only 3.1 ounces with a glass-reinforced nylon (GRN) grip
ONE HAND OPEN FOLDER KNIFE: One of the most reliable fast blade knife systems ever; assisted opening pocket knife opens single-handed, while Piston Lock secures the stainless steel blade
AUS-8 PARTIALLY SERRATED POCKET KNIFE: Quick release knife mechanism inspires the ‘flash’ on the satin-polish of this deep carry knife, fast clip knife and every day pocket knife
SOG KNIVES FOR LIFE: Take care of your serrated EDC folding knife and we’ll take care of you; SOG every day carry knives are built to last, and we consider all repair and replacement requests

I recommend purchasing the SOG Flash II at Amazon or BladeHQ. Please consider that buying anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.

CRKT Drifter Review

by Dan Jackson 24 Comments

Last Updated: August 8, 2019
For those who can’t get enough high value EDC knives, or simply need a tool for every day use that is both well made and inexpensive, I think it’s going to be tough to ignore the CRKT Drifter. For some, this may be their first “real knife” that sends them down the slippery slope that is blade collecting. Others might want to spice up their EDC rotation without breaking the bank. I think that for many reasons this inexpensive offering from CRKT is a great ambassador for the knife world, and its review here is long overdue.

Buy the CRKT Drifter at BladeHQ

Buy on Amazon

General Dimensions and Blade Details

The Drifter comes in two major variants, a liner lock version with G-10 scales and a stainless steel (SS) framelock version. Both share the same overall length of 6.5″ and the same 2.88″ blade. The stainless steel handled version weighs 3.2 ounces while the G10 clad Drifter weighs a mere 2.4 ounces. If I had to pick between the two for EDC, I’d say the G10 version gets my vote. I love the ultra light carry weight, it really disappears in pocket. Regardless of the version that strikes your fancy the sub 3″ blade and reasonable weight make these ideal EDC knives.

The blade is a classic drop point shape that reminds me a lot of my Benchmade Griptilian. It features the same swedge and hollow grind that starts about 3/4 of the way up the blade. The Drifter is given a gentle recurve that adds a little spice without making it too difficult to sharpen. The tip is fine enough for detail work, but not too delicate. This is an all around solid blade shape.

The G10 version of this knife comes with a handsome gray Titanium Nitride (TiNi) coating while the stainless steel version comes satin finished. I really like the look of that TiNi coating – it’s a handsome gun metal gray and mine has held up pretty well considering.

The Drifter’s blade comes in 8Cr14MoV. Anecdotally 8Cr14MoV is considered to be slightly better than 8Cr13MoV, but I really haven’t noticed a difference… apparently that extra chromium molecule does something. Fans of 8Cr13MoV will like this steel and those who don’t like 8Cr13MoV may find a soft spot for its high Chromium counterpart. I like it because it’s easy to sharpen, holds an edge reasonably well and has decent corrosion resistance.

Handle, Ergonomics and Pocket Clip

Depending on what model you get, the handle will be full stainless steel or G10 over stainless steel liners. Either way the handle is a simple minimalist design with two pillars and a lanyard hole. On the G10 version the liners aren’t milled, which begs the question, how light would this thing be if they did that? Honestly my guess is any weight savings probably wouldn’t be worth the premium in price. Both handles are nicely finished, they did a great job here.

At 3.6″ long, the handle of the Drifter is a decent size and will comfortably accept a 4 finger grip, even with larger hands. The G10 version is definitely the grippier of the two, and the black G10 has been given a nice light texturing. The SS version lacks any meaningful texture, but I have no problem with it for EDC. There is jimping on the thumb ramp and choil. It’s not super aggressive, but it gets the job done. All in all I think the ergonomics here are quite reasonable.

The clip is my only real source of constructive criticism. It’s a right hand tip-down carry only clip – not my first choice for positioning. I’d love to see the option to carry tip down, and preferably 4 corners style clip, but really for a $20 knife I think what we have here works.

Perhaps the best part of the clip is that it’s removable, and the small size of the knife allows you to carry it loose in your pocket. There is a lanyard hole which could be a nice option if you decide to go the “clipless” route – it should take hollowed out 550 cord without protest. I will say it is a sturdy clip, it rides sorta low and it’s been darkened in both versions (gunmetal grey like the handle for the SS version, black for the G10).

Deployment and Lockup

Deployment for both Drifters is very smooth – almost surprisingly smooth for such inexpensive knives. Thanks to the oversize thumb studs and metal washers it takes very little effort to get this knife ready for work. One minor thing to note is that due to the size of these thumbstuds the knife can get caught up on your pocket. That’s the tradeoff with having nice big thumbstuds.

Lockup on both the G10 and Stainless steel versions is solid. My stainless steel version has broken in a bit, but there is no blade play at all. My liner lock version bites in nice and early. Some may feel that the frame lock is stronger, but honestly I don’t think it particularly matters with these little knives. Both should handle all your EDC tasks without issue.

CRKT Drifter Review – Final Thoughts

All in all I really like both the Drifters. For well under $25 a piece, these are two high value blades that have absolutely been done right. You get a nice no-frills design that totally works. Good deployment and lockup, nice materials, solid fit and finish. Everything you would expect from a much more expensive knife. If I had to find something to complain about, it would be the lack of placement options for the pocket clip, but even then I think the clip is passable. Again, for ultra light weight EDC I’d go with the G10 version, but you really can’t go wrong with either knife (or both!).

CRKT Drifter EDC Folding Pocket Knife: Everyday Carry, Gray Ti Nitride Blade, Thumb Stud Opening, Black G10 Handle, Pocket Clip 6450K

Exceptional Grip: G10 handle provides exceptional grip in all conditions
Enhanced Protection: Gray titanium nitride coating improves corrosion resistance
Easy Opening: Thumb stud allows for fast opening with one hand
Limited Lifetime Warranty covers any defects in materials or workmanship, see company site for details

CRKT Drifter EDC Folding Pocket Knife: Everyday Carry, Gray Ti Nitride Blade, Thumb Stud Opening, Stainless Steel Handle, Pocket Clip 6450S

Classy Appearance: Satin finish blade has a modern look
Ultimate Durability: Stainless steel handle withstands hard use
Brute Strength: Frame lock utilizes a thick lock bar to secure the blade
Limited Lifetime Warranty covers any defects in materials or workmanship, see company site for details

I recommend buying the CRKT Drifter at Amazon or BladeHQ. Thank you for reading!

Spyderco Sage 1 Review

by Dan Jackson 24 Comments

Last Updated: July 20, 2019
A while back I took a look at the Spyderco Sage 2. The Sage 2 is an absolutely fantastic knife and with it’s eye catching titanium handle, I find that the Sage 1 often plays second fiddle.

Buy the Sage 1 at BladeHQ

Buy on Amazon

That is a shame, because I think that the Sage 1 may be the better EDC knife – at least for me. Regardless, I can safely say that it’s an excellent EDC knife.

Clearly, it’s high time I reviewed my Sage 1. Let’s take a closer look and see why I like this knife so much.

Purpose

The Sage 1 is arguably the perfect EDC knife for my purposes. Yes, you read that right. The Sage 1 is my personal EDC blade, and for my purposes I couldn’t ask for a better knife. What I like about the Sage 1 is that it has perfect EDC proportions, excellent materials, outstanding fit and finish and it carries very well.

In addition to EDC, I think this knife is a great collector’s piece (I know plenty of people who have all 3 of the knives in the Sage series) and while the Sage 1 is not billed as a tactical knife, it could certainly fulfill an emergency tactical role. Finally, the carbon fiber and stealthy carry make this a great option for a gentleman’s folder.

General Dimensions and Blade Details

As for the dimensions we have a 3″ blade, an overall length of 7 1/8″ and a weight of 3.2 ounces. Going back to me calling the Sage 1 the “perfect” EDC knife, the dimensions of the Sage 1 are ideal for EDC in my book. I really don’t like carrying anything smaller, and anything bigger starts to raise some eyebrows (sad, but true). The Sage 2 actually handles like a bigger knife, but it remains small and is people friendly.

The blade is a classic Spyderco leaf shape given a nice full flat grind. There is a decent amount of belly and the tip has a sturdy point while still being strong. This is a very practical blade shape that is also non-threatening to people who don’t understand knives.

The blade steel is S30V which was a gold standard for production knives for many years. When I originally wrote this review in 2011, it was about as good as you would find in any $100 knife. It’s still a great choice, but I would not complaint if they upgraded to S35VN, or chose CTS-XHP like on the Chaparral. S30V is a harder steel, so sharpening takes more effort than say, AUS8 and other more inexpensive steels. However, S30V it takes a good edge and holds it well. S30V is also very resistant to rust and corrosion. Given the price point and intended use of the knife I think this is a great steel.

Handle, Ergonomics and Pocket Clip

The handle is part of what sets each Sage apart, and the Sage 1 has carbon fiber scales over stainless steel liners. The carbon fiber is left with a “woven” or “twill” texture that provides some traction and is pleasant in hand. The entire knife is held together by 3 hex bolts, and the flow through design is an exercise in restraint. Looking inside you can see that the liners have been milled out extensively. I count no less than 4 different size bits used to mill this liner out. Everything has been expertly finished and polished up – including the liners.

The ergonomics are another huge plus to the Sage 1 (and the entire Sage series really). First of all, there is a nice 50/50 choil and a large thumb ramp. This makes the most of the relatively small handle and provides plenty of room, even for larger hands, in practically any grip. I absolutely love the ergonomics of the Sage, it’s much like the Caly 3 if you have ever handled one of them. Basically it gives you a big knife grip in a small easy to carry package.

The pocket clip is another home run. While pocket clips are often a source of grief for me the Sage 1’s clip is about to close to perfect as I can ask for. The Sages all use the Spyderco “wire” clip, which is actually a very strong piece of tempered steel. What sets the Sage 1 apart is that has given the clip a black coating. Not only has the coating held up extremely well, the knife disappears when you clip it to the pocket. If you work in an office, this is the perfect knife – it’s very difficult to notice this knife when wearing slacks (ultimate urban camo). Finally, I have to mention that Spyderco gives you the option for ambidextrous tip up carry. This is perfect for my applications.

Lock and Deployment

The Sage 1 uses a liner lock, and not just any liner lock but a “Walker Linerlock.” That is because the Sage series was designed to pay homage to innovators in the knife industry and the Sage 1 was made to honor Michael Walker. Michael Walker is known for designing the ball-bearing detent method of holding a lock in place which is used in many many knives today. A knife designed around a lock should have decent lockup, and the Sage 1 does not disappoint. The lock makes a very crisp “click” when engaged and it bites in nice and early. There is absolutely zero play in any direction. This is a very strong liner lock worthy of paying homage to Michael Walker.

Deployment is accomplished by a 1/2″ Spyderhole. I found deployment to initially be pretty stiff on the Sage 1. For a while this was my only real complaint with the knife. However, it took a while but the knife slowly broke in. These days deployment is very smooth and it only seems to be getting smoother (after months of carry). Of course there are some large phosphor bronze washers in there which reduces the friction but the tolerances are very tight on this knife – in my experience this knife will take time to break in but is well worth the wait.

Spyderco Sage 1 vs. Spyderco Caly 3 Carbon Fiber

Ah, the age old question. Two beautiful Spyderco knives that are very similar in size, price and materials yet have some interesting differences as well. Which one should you choose? Well, I attempted to answer that question with a youtube video. It’s not an easy answer, but I like the idea of saying “the Sage 1 is my wife and the Caly 3 is my mistress.” Really that Caly 3 is built like nothing else, just an awesome knife that has the “soul” I think the Sage 1 lacks in some way (difficult to describe). That said, for all out practical EDC use, I prefer the Sage 1. The knife rocks, it’s designed to be used and will be up for any challenge. Buy ’em both if you have the money, I don’t think you will be disappointed with either one.

Spyderco Sage 1 Review – Final Thoughts

So yeah, what is there left to say? Not a whole lot really, the Sage 1 is just a fantastic knife. I stand by my original comment that this is the “perfect EDC knife” for me – even months after writing the first draft of this review – this one’s a keeper! Sure it all comes down to personal preference, but I’ve handled a lot of knives and if you are looking in the ~3″ blade EDC knife category, it’s going to be hard to find something as well rounded and beautifully executed as the Sage 1.

I tell you, I write very few reviews that are this positive, I literally have nothing bad to say about the Sage 1. The overall fit and finish on this knife is outstanding. Every surface has been polished, the blade centering is dead on, and everything has been done to an almost eerie state of perfection. If you are on the fence about the Sage 1 my advice would be to go ahead and buy it. You will not be disappointed.

Update – I originally wrote this review in 2011. I still have my Sage 1, still carry it, still use it, and still enjoy it. It remains one of my all time favorite EDC pieces. This continues to be an excellent knife.

Spyderco Sage Linerlock

Crafted from the highest quality materials
Built for performance and durability
Made in Taiwan
Folding knife with CPF-S30V steel blade
PlainEdge is ground flat for precise cutting

I recommend purchasing the Sage 1 at Amazon or BladeHQ. Purchasing anything through any of the links on this site helps support BladeReviews. Any and all support is greatly appreciated. Thank you very much.

Kershaw Blur Review

by Dan Jackson 22 Comments

Last Updated: February 20, 2019

While I enjoy reviewing all kinds of knives, it’s the mid size edc “working man’s” knives that I especially enjoy reviewing because these mid size EDC’s are what spend the most time in my pockets and in my hands. The Kershaw Blur is such a quintessential mid size EDC knife that a full review is long overdo.

Buy the Kershaw Blur at BladeHQ

Buy on Amazon

Also, I can’t ignore the fact that this another Ken Onion design. Ken Onion is the man behind a lot of the knives I have reviewed (such as the CRKT Ripple), and his designs are very famous for their flowing shapes. In contrast some of his other work, the Blur looks fairly pedestrian, but it is a good size knife with a very functional design which is part of the reason why I think the Blur has become so popular.

General Dimensions and Blade Details

The Blur has an overall length of 7.875″, a 3.375″ blade, weighs 3.9 ounces, and is made in the USA. It’s a medium to large size folding knife. I would classify this as a larger EDC knife or a tactical knife.

The Blur comes in many flavors and there is a little something for everyone with different colors, blade steels, handle inserts, and blade shapes. The “standard” Blur comes with a nice hollow ground drop point blade, but you also have the option of a tanto blade and there is even a blunt tip version for EMT and rescue applications. You also have the option of plain edge or partially serrated. Kershaw also sells this knife with a black DLC (Diamond Like Coating) on the blade – it’s an attractive option and wears really well.

In addition to that high hollow grind, there is also a slight recurve on the edge (which is more pronounced with the rescue version). The recurve is slight, which keeps this knife reasonably easy to sharpen. There is a swedge running along the top which keeps the tip of the drop point version strong.

In practice the Blur is a formidable slicer. The slight recurve and hollow grind make the knife excellent for cardboard. The tip provides a good combination of strength and piercing ability. This is designed to be a work knife, and I don’t hesitate to use it in that capacity.

As for blade steel, the base model comes with a fairly unassuming Sandvik 14NC28 steel blade (shown here). This is a good mid range steel, ideal for EDC. It takes an edge easily and holds it well. I have had no issues with rust – especially with the DLC coating. I would put 14NC28 above AUS-8 but below 154CM.

Kershaw also offers the Blur in S30V, CPM154CM, and a even a composite blade with Sandvik 14NC28 with a ZDP189 edge. I have also seen this knife in 440A, 420HC, and few others. The S30V version is especially popular, and a number of limited editions have been released over the years. There is a steel here for every taste (and every budget).

Handle, Ergonomics and Pocket Clip

The first thing you will notice about the handle is the sandpaper looking inserts. Kershaw calls this “Trac-Tec” and it is actually a rubberized material that provides plenty of traction without tearing up your hands. The rest of the handle is made from anodized 6061 aluminum and features a flow though (pillar construction) design. All in all this is a very strong design. The handles are very nicely finished and relatively light weight – I have no complaints.

The ergonomics of the Blur are excellent. This simple handle gets out of your way and affords a comfortable grip for small and large hands alike. There is a short run of jimping on the gently sloping thumb ramp. It provides just enough traction to index your thumb and hold it in place. The rubber trac-tec inserts aren’t my favorite feature of the knife, but I must admit they provide plenty of grip. All the corners have been rounded and the knife feels natural in hand. Perfect for getting plenty of work done.

The pocket clip is fairly well executed. Depending on your particular model, it comes with a matte black finish and rides pretty low in the pocket (not “super” low, if that is something you are looking for). It does allow for tip up or tip down carry, but it is not ambidextrous. One thing I especially like is how Kershaw doesn’t include their Trac-Tec texturing where the clip touches the handle. This makes the knife much easier to remove from the pocket (although I do find it sometimes hangs up a little.

Deployment and Lockup

Kershaw opted for ambidextrous thumbstuds here. The thumb studs are cut at an angle and dig into your thumb. One review I read said that the thumb studs looked like a “stair case” which is actually a pretty good description. Some people love these thumb studs, others hate them. I find that they work alright for my purposes. I think that these thumb studs work best with an assisted opener, but I think they are a little fiddly and not my favorite.

Being an early Ken Onion / Kershaw collaboration, this knife comes with Ken’s Speedsafe assisted opening system pre-installed. I am not the biggest fan of assisted opening knives, but the Speedsafe on the Blur is robust and the action is good. Of course, you can always take the spring out and reduce the Blur to a 100% manually opening blade if that is what you prefer. There is a small detent so the blade won’t fall out of the handle if you take away the assisted opening spring.

The Blur features a liner lock. I think the lock works well here, especially in the EDC and backup tactical roles. The liner engages early and the lock-up is strong with zero movement. The whole deployment and lockup aspects of this knife is a real plus in my book because it is very smooth. Kershaw knows how to put assisted openings and liner locks together and the Blur is an outstanding example of that knowledge.

Blade centering on my knife is pretty much perfect.

Kershaw Blur Review – Final Thoughts

The Kershaw Blur is a modern classic. Offered in a myriad of different blade steels and handle colors, there is a little something for everyone. This is one of Ken Onion’s more restrained designs for Kershaw, and the clean lines of the Blur has garnered it broad appeal, and the knife continues to sell well even years after it’s release.

In fact, the knife has developed something of a cult following among enthusiasts of high end knives. This is a humble blade, but it makes for a great beater. I respect the Blur in the same way that I respect the Cold Steel American Lawman, Buck Marksman, and Hogue EX04 (these are among my favorite folders with ~3.5″ blades). This is a tough working knife and was designed to be used.

The Blur is made in the USA, is well constructed, features quality materials, and is priced reasonably – usually between $45 and $75 depending on the trim level. This everyman’s folder gets a lot of things right, and for that reason I have included it as one of the my recommended EDC knives.

Kershaw Blur Black (1670BLK) Everyday Carry Pocketknife, 3.4 inch Stainless Steel Drop Point Blade, Cerakote Blade Finish, SpeedSafe Opening, Reversible Pocketclip; 3.9 OZ

KERSHAW BLUR BLACK POCKETKNIFE: A classic Kershaw with a do-it-all blade and dark good looks, the Blur is the perfect EDC for multi-tasking thanks to its big, slightly recurved blade. Made in the USA.
DROP POINT RECURVE PLAIN EDGE BLADE: Made from high-performance Sandvik 14C28N stainless-steel that holds its edge and resharpens easily. A Cerakote blade coating adds protection and enhances performance.
6061-T6 ALUMINUM HANDLE: The black anodized aluminum handle is scratch and fade-resistant. Trac-Tec inserts promote a secure, comfortable grip during use. Includes reversible pocketclip for right, tip-up/down carry.
DESIGNED WITH SAFETY IN MIND: Equipped with Kershaw’s assisted opening for easy one-handed release with thumb-stud. Inset liner lock secures blade in place for ensured user safety.
SIZE SPECIFICATIONS: Blade Length: 3.4in. Closed Length: 4.5in. Overall Length: 7.9in. Weighing in at 3.9oz. Backed by Kershaw’s Limited Lifetime Warranty.

I recommend purchasing the Blur at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.