CRKT

CRKT Drifter Review

Last Updated: August 8, 2019
For those who can’t get enough high value EDC knives, or simply need a tool for every day use that is both well made and inexpensive, I think it’s going to be tough to ignore the CRKT Drifter. For some, this may be their first “real knife” that sends them down the slippery slope that is blade collecting. Others might want to spice up their EDC rotation without breaking the bank. I think that for many reasons this inexpensive offering from CRKT is a great ambassador for the knife world, and its review here is long overdue.

Buy the CRKT Drifter at BladeHQ

Buy on Amazon

General Dimensions and Blade Details

The Drifter comes in two major variants, a liner lock version with G-10 scales and a stainless steel (SS) framelock version. Both share the same overall length of 6.5″ and the same 2.88″ blade. The stainless steel handled version weighs 3.2 ounces while the G10 clad Drifter weighs a mere 2.4 ounces. If I had to pick between the two for EDC, I’d say the G10 version gets my vote. I love the ultra light carry weight, it really disappears in pocket. Regardless of the version that strikes your fancy the sub 3″ blade and reasonable weight make these ideal EDC knives.

The blade is a classic drop point shape that reminds me a lot of my Benchmade Griptilian. It features the same swedge and hollow grind that starts about 3/4 of the way up the blade. The Drifter is given a gentle recurve that adds a little spice without making it too difficult to sharpen. The tip is fine enough for detail work, but not too delicate. This is an all around solid blade shape.

The G10 version of this knife comes with a handsome gray Titanium Nitride (TiNi) coating while the stainless steel version comes satin finished. I really like the look of that TiNi coating – it’s a handsome gun metal gray and mine has held up pretty well considering.

The Drifter’s blade comes in 8Cr14MoV. Anecdotally 8Cr14MoV is considered to be slightly better than 8Cr13MoV, but I really haven’t noticed a difference… apparently that extra chromium molecule does something. Fans of 8Cr13MoV will like this steel and those who don’t like 8Cr13MoV may find a soft spot for its high Chromium counterpart. I like it because it’s easy to sharpen, holds an edge reasonably well and has decent corrosion resistance.

Handle, Ergonomics and Pocket Clip

Depending on what model you get, the handle will be full stainless steel or G10 over stainless steel liners. Either way the handle is a simple minimalist design with two pillars and a lanyard hole. On the G10 version the liners aren’t milled, which begs the question, how light would this thing be if they did that? Honestly my guess is any weight savings probably wouldn’t be worth the premium in price. Both handles are nicely finished, they did a great job here.

At 3.6″ long, the handle of the Drifter is a decent size and will comfortably accept a 4 finger grip, even with larger hands. The G10 version is definitely the grippier of the two, and the black G10 has been given a nice light texturing. The SS version lacks any meaningful texture, but I have no problem with it for EDC. There is jimping on the thumb ramp and choil. It’s not super aggressive, but it gets the job done. All in all I think the ergonomics here are quite reasonable.

The clip is my only real source of constructive criticism. It’s a right hand tip-down carry only clip – not my first choice for positioning. I’d love to see the option to carry tip down, and preferably 4 corners style clip, but really for a $20 knife I think what we have here works.

Perhaps the best part of the clip is that it’s removable, and the small size of the knife allows you to carry it loose in your pocket. There is a lanyard hole which could be a nice option if you decide to go the “clipless” route – it should take hollowed out 550 cord without protest. I will say it is a sturdy clip, it rides sorta low and it’s been darkened in both versions (gunmetal grey like the handle for the SS version, black for the G10).

Deployment and Lockup

Deployment for both Drifters is very smooth – almost surprisingly smooth for such inexpensive knives. Thanks to the oversize thumb studs and metal washers it takes very little effort to get this knife ready for work. One minor thing to note is that due to the size of these thumbstuds the knife can get caught up on your pocket. That’s the tradeoff with having nice big thumbstuds.

Lockup on both the G10 and Stainless steel versions is solid. My stainless steel version has broken in a bit, but there is no blade play at all. My liner lock version bites in nice and early. Some may feel that the frame lock is stronger, but honestly I don’t think it particularly matters with these little knives. Both should handle all your EDC tasks without issue.

CRKT Drifter Review – Final Thoughts

All in all I really like both the Drifters. For well under $25 a piece, these are two high value blades that have absolutely been done right. You get a nice no-frills design that totally works. Good deployment and lockup, nice materials, solid fit and finish. Everything you would expect from a much more expensive knife. If I had to find something to complain about, it would be the lack of placement options for the pocket clip, but even then I think the clip is passable. Again, for ultra light weight EDC I’d go with the G10 version, but you really can’t go wrong with either knife (or both!).

CRKT Drifter EDC Folding Pocket Knife: Everyday Carry, Gray Ti Nitride Blade, Thumb Stud Opening, Black G10 Handle, Pocket Clip 6450K

Exceptional Grip: G10 handle provides exceptional grip in all conditions
Enhanced Protection: Gray titanium nitride coating improves corrosion resistance
Easy Opening: Thumb stud allows for fast opening with one hand
Limited Lifetime Warranty covers any defects in materials or workmanship, see company site for details

CRKT Drifter EDC Folding Pocket Knife: Everyday Carry, Gray Ti Nitride Blade, Thumb Stud Opening, Stainless Steel Handle, Pocket Clip 6450S

Classy Appearance: Satin finish blade has a modern look
Ultimate Durability: Stainless steel handle withstands hard use
Brute Strength: Frame lock utilizes a thick lock bar to secure the blade
Limited Lifetime Warranty covers any defects in materials or workmanship, see company site for details

I recommend buying the CRKT Drifter at Amazon or BladeHQ. Thank you for reading!

CRKT Ripple Review

by Dan Jackson 17 Comments

Last Updated: August 4, 2019
The CKRT Ripple is a design that had me doing a double take. The flowing lines and sharp looks were very “Ken Onion-y” and upon closer inspection the knife was in fact designed by Ken Onion. It turns out Mr. Onion has parted ways with the folks at Kershaw and he has been picked up by competitor CRKT.

Buy the CRKT Ripple at BladeHQ

Buy on Amazon

The Ripple was one of Ken’s first designs for CRKT. It’s something of a gentleman’s EDC knife, with Ken’s signature flowing curves in a low profile package.

General Dimensions and Blade Details

The Ripple comes in a few sizes. What you see here is the large version with a 3 1/8″ blade, an overall length of 7 1/2″ and a weight of 2.9 ounces. This is a nice size for an EDC knife. Not only is the Ripple lightweight at under 3 ounces, but it’s thin too. The whole knife is less than 5/16″ thick. Plenty of blade in a lightweight package. It’s a slim design that begs to be carried.

The blade is an attractive drop point design. There is an absence of the typical organic curves that Ken Onion is known for, but it still has his style and I find myself wanting for nothing. This is a really slender and refined blade and it comes with an exquisite tip. The swedge running 3/4 of the top of the blade is another elegant touch and the high hollow grind makes this a nice slicer as well. Personally, I love this blade shape.

CRKT has released this knife in several different steels over the years, but 8Cr14MoV is going to be the most common configuration. 8Cr14MoV has been discussed at length before, but this is a Chinese steel that is best known for being expensive, easy to sharpen, and holding an adequate edge. It’s on par with AUS-8, but below VG-10 and 154CM in the steel hierarchy. Feel free to check out my knife steel article for more information on different types of steel.

Handle, Ergonomics, and Pocket Clip

The handle of the Ripple is either made of 420J2 stainless steel (the framelock version) or aluminum (the linerlock version – shown here). The handle pieces have first been CNC milled with a ripple pattern. The handle has then been either a blue or black titanium nitride coating and then has been rubbed to reveal the silver look of the steel. It is a very unique look and can be difficult to capture in photographs although darkchild69, our featured photographer, has done an excellent job here. Another design element is the series of 44 small holes milled into the side of the handle. This is more for decoration I think, although it does lighten the handle up slightly. Finally, the handle is bolted together with two pillars. Very simple and as always, very easy to keep clean. This is a very slim handle and all the detail is unlike anything else currently on the market.

This is a thin metal handle so logic would suggest that this won’t be the most comfortable knife. In fact, the ergonomics are surprisingly good. The handle has been rounded and the flipper helps define the choil. Additionally, there is nice jimping on both the thumb ramp and handle. This provides plenty of traction and makes this a very easy knife to use for general tasks.

The clip is another interesting component. It is mounted high for tip down carry. It sits flush with the top of the handle and follows the line of the handle. One gripe is that the pocket clip it is tip-down right hand carry only. With the assisted open and the flipper, I can totally see why CRKT opted for tip down carry, but with 44 holes already in this knife, they really need to drill a couple more and make this clip ambidextrous.

Deployment and Lockup

The Ripple is a non-assisted open knife actuated by a flipper on the back of the handle. Those familiar with Ken Onion’s Leek, Chive, ZT 302, etc will be very familiar with this style of deployment. The flipper has been given some aggressive jimping that really bites into your thumb, you will not be slipping on this flipper. There are no thumb studs.

An interesting feature of the Ripple is the IKBS opening system. IKBS stands for “Ikoma Korth Bearing System” and means just that. There are a total of 16 ball bearings (8 per side of the blade). The bearings are uncaged and sit in little grooves machined into the handle and are used in place of teflon or phosphor bronze washers. Initial impressions are very good – the bearings make for a very fast and smooth deployment. This is one of the smoothest opening knives currently on the market (production blades at least). The IKBS combined with the assisted feature makes for effortless blade presentation. And apparently the bearings do not need much maintenance, which is good because I would not want to take this knife apart.

Here is an update from 2019: Over the past 8+ years I’ve owned countless bearing equipped knives. Generally they have held up real well. The versions with caged bearings are easier to take apart. This IKBS equipped knife includes loose bearings. You can take these knives apart too, but you need to be careful. Here is a great video from CRKT on how to clean an IKBS equipped knife.

The Ripple uses a steel frame lock, which is plenty strong for the kind of EDC tasks this knife was designed. Due to the intricate design on the handle you can hardly tell the framelock is there. I like how this looks and I also like how the framelock and adds to the simplicity of the design. However, I have noticed on multiple knives, the framelock extends very far over (see below) while others lock up early. Frame locks are designed to slowly break in and will travel over with extended use. Having the lock engage “late” from the start means that you may get less life out of the lock. If you get a Ripple with this late lock up, I would recommend talking with CRKT and getting it fixed because in my opinion, this shouldn’t happen with a new knife.

Here is a parting size comparison with my Boker Plus Urban Trapper:

CRKT Ripple Review – Final Thoughts

The Ripple is a beautiful knife. Ken Onion took a sexy blade shape and melded it with a wonderful handle. This knife “flows” from an aesthetic standpoint and I think the design is just phenomenal. The IKBS is both interesting and functional, long term testing will tell if this is a mere novelty or truly a revolutionary way to deploy a blade. The Ripple is made in Taiwan, which we now know (thanks to Spyderco) is capable of making some great higher end blades at a terrific value.

All things considered the CRKT did a great job with the Ripple. I would prefer if they re-worked the pocket clip so that it was ambidextrous, and a little less weird, but beyond that you get a lot of nice knife for the money. The Ripple is one of the knives that laid the foundation for Ken Onion / CRKT collaborations, and continues to be a great lightweight high value option for folks years after its original release.

CRKT Ripple EDC Folding Pocket Knife: Gentleman Everyday Carry, Satin Blade, IKBS Ball Bearing Pivot, Liner Lock, Textured Aluminum Handle, Pocket Clip K415KXP

Fast Opening: IKBS ball bearing pivot deploys the blade fast
Fast Opening: The flipper deploys the blade fast
Strong And Lightweight: Aluminum handle combines strength with minimal weight
Designed by Ken Onion in Kaneohe, Hawaii
Limited Lifetime Warranty covers any defects in materials or workmanship, see company site for details

I recommend buying the CRKT Ripple at Amazon or BladeHQ. Thanks for reading and Stay Sharp.

CRKT Folts Minimalist Review

by Dan Jackson 16 Comments

Last Updated: September 12, 2018

The CRKT Folts Minimalist is an intriguing design from acclaimed custom knife maker Allan Folts. I recently had the pleasure of speaking with Mr. Folts and one of the big topics of conversation was this little knife. Allan is a classically educated designer and artist, and he takes both form and function very seriously.

Buy the CRKT Minimalist at BladeHQ

No products found.

Apparently, the Minimalist took over 2 year to design. It rode with him on trips around the country to various knife shows and exhibitions. He got feedback from hundreds of people and carefully tweaked the design before arriving at what you see here today. It may sound a little extreme, but I’ll tell you, pick this knife up. Hold it for a second and let me know what you think – the attention to detail should be obvious. This is a small knife, but it fits the hand better than some knives I own that are three times the size.

Anyhow, I have a certain methodology to all the reviews, so I don’t want to too far ahead here. Suffice to say, this is an exceptional little knife from the mind of a great maker offered at a phenomenal price.

Purpose

One of my favorite things about the Minimalist is the exceptional utility. It is a stout design that can also be a great option for EDC. Even if you you don’t normally carry a fixed blade knife, the Minimalist is discrete and can be easily slipped into a pocket.

I also think it’s a great knife for the truck, for your bug out bag, as an absolute last ditch tactical blade, as a backup backup survival blade, for camping trips, fishing, etc etc etc. I’m not saying you can baton logs with it, but at under 2 ounces it’s cheap insurance if your primary blade(s) fail. An all around workhorse, this little knife can pretty much do it all.

General Dimensions and Blade Specifics

The Minimalist is just over 5 inches long and sports a 2 1/8″ blade ground from 2.4 mm stock. The weight of this knife is 1.6 ounces.

As far as steel goes, the Minimalist is a full tang knife made of 5Cr13MoV. This steel is chemically very similar to 8Cr13Mov which personally, I do not mind. In my experience, 5Cr13Mov behaves a lot like 8Cr13Mov too. Both steels are a little softer than high end steels like VG10, S30V and the like, thus they tend to lose their edges faster, but I find it to be entirely adequate for my purposes. I will say, this steel can take an edge and the knife came surprisingly sharp. Out of the box I was able to shave hairs off my arm with no problem – not what I was expecting from a sub $20 blade!

The Minimalist is currently offered in 3 blade shapes. The original knife came with a wharncliffe blade. Shortly thereafter a tanto and bowie made their way on the scene. I love the shape of the bowie so I had to have that one. Folts took the classic bowie design and gave it a few tweaks to fit with the overall look of the knife. There is plenty of belly and the tip is reinforced thanks to a large swedge. The blade (and all of the metal) was given an attractive stonewashed finish. The kife has a shallow hollow grind that starts about 3/4 of the way up the blade.

Handle and Ergonomics

The handle, like most fixed blade knives, is pretty simple. CRKT actually sprung for some linen micarta scales here which is a material that you wouldn’t expect on such an inexpensive knife. The scales are actually a deep forest green, which is pretty cool color that I didn’t expect either (most pictures make the handle appear black). No complaints with the handle materials or the color. The scales are bolted on with torx screws so you can take the knife apart and remove the lanyard – another nice feature.

The ergonomics of this knife are outstanding. I pulled this blade out of the sheath and the knife literally fell right into place. It was like my hand was made for this knife. All it took was a second of contact and suddenly I “got” it. Allen told me about how this knife took 2 years to design, and that is something you can easily dismiss. I tell you, it now makes sense.

So as you can tell, this is a 3 finger style knife. A small lanyard is attached to the butt of the handle which provides a little extra grip (I think it’s a nice touch actually, works well). There is a nicely designed thumb ramp with some aggressive jimping. The micarta scales have also been very well finished. Everything is flush and the knife feels amazing in hand. The handle comes apart with 4 small torx screws, which is great if you want to swap out the lanyard or do your own custom scales.

Sheath

The sheath is made of Zytel, a hard plastic similar to Kydex. The retention on this sheath is excellent and the blade locks into place with a soft “click.” I tried to shake the knife out, and that simply was not going to happen – it is very secure. There are 6 eyelets for various methods of attachment to stuff.

Billed as a neck knife, a few feet of cordage is included to wear the knife around your neck. I’ll be honest here, I’ve never had a neck knife before, and my lifestyle usually doesn’t permit me to wear one. This was a problem because I couldn’t put this knife down, so I took off the cordage and slipped the knife in my pocket. It actually carries really well this way. It’s a slim design that I didn’t notice as I went about my daily tasks. The lanyard on the handle gave me a little extra to grab onto when I needed to fish out the knife for a task. I carried the knife around my neck on the weekends, and well, it’s not really for me. Convenient enough I suppose, but I’m not accustomed a knife around my neck.

A detachable belt loop is also included. It attaches with two bolts (also included) and adds to the versatility of this simple yet entirely adequate sheath.

CRKT Minimalist Review – Final Thoughts

Lets be honest here, I fell in love with this knife the second I took it out of the box. The ergonomics are fantastic. It’s a compact blade that fits the hand like nothing else. I’d love to see this in a slightly better steel, like say some 440C, but the 5Cr13MoV is actually holding up really well and for less than $20 shipped to my door, this was really a no brainer. I think it is a very high value knife. There are a lot of details in this blade that make it special. In conclusion the Minimalist is aptly named: it’s a simple knife, done right.

CRKT Minimalist Bowie Neck : Compact Fixed Blade Knife, Folts Utility with Bead Blast Blade, Resin Infused Fiber Handle, and Sheath 2387

Easy To Sharpen: High carbon stainless steel blade takes an edge well
Minimizes Reflectivity: Bead blast finish reduces reflection
Strong and Visual: resin infused fiber handle combines strength with visual appeal
Gear Compatible: Durable thermoplastic sheath with mounting options
Compact Utility: Lightweight and easy to carry

I recommend purchasing the CRKT Minimalist at Amazon or BladeHQ. Please consider that purchasing anything through any of the links on this website helps support BladeReviews.com, and keeps the site going. As always, any and all support is greatly appreciated. Thank you very much.